Documentation:Streaming HowTo New

This documentation explains how to stream, transcode and save streams using VLC media player.

NOTE: This is work in progress. For a more complete, yet outdated, documentation on Streaming with VLC please see the old Streaming HowTo.

Introduction

VLC media player is able to stream, transcode and save different media streams. For more information about the formats and codecs supported please see the VideoLAN Streaming Features list.

Transcoding

Transcoding is the process of taking a media file or stream and converting it to a different format or bitrate.
There are two methods for transcoding in VLC: via the GUI (VLC's default interface) or via the commandline. The term transcode by itself normally refers to converting one media format to another and saving the output to a file (i.e. no streaming involved).

Transcoding using the GUI

One of the methods of transcoding is via the GUI. To access this:

1. In VLC, go to "Media >> Convert / Save..." (Ctrl+R).
2. Add the input file(s) or stream(s) you want to transcode. Press "Convert / Save".
3. In the "Convert" windows specify the destination file name (including file extension - e.g. on Windows "C:\out.mp3").
4. Select the desired codec from the profile list. To check/edit the settings of a given profile press the "Edit selected profile" button. Profiles can also be added/deleted.
5. Press "Start".

If the profile settings were compatible and transcoding was successful, a playable destination file should be created.

Using the commandline

Another method of transcoding is via the commandline. This is more flexible than via the GUI as it enables full usage of the modules and options available in VLC.

To use the VLC's commandline you need to have access to the commandline interface, for example via a shell.

Windows-based systems

On Windows-based systems the Command Prompt can be used. This can be found in the "Accessories" folder of the Start menu. Alternatively by going to "Start >> Run..." or pressing "Windows key + R", entering "cmd" into the text field and press "OK" or Enter.

Once the Command Prompt window is opened navigating to the folder/directory where VLC is located is easiest for using the commandline as only "vlc.exe" or "vlc" (as the .exe part is assumed) needs to entered to run VLC. If VLC is installed in the default location (on a 32-bit system) running:

cd "C:\Program Files\VideoLAN\VLC"

Should change to the directory where vlc.exe is located.

Unix systems

On Unix-based system (such as Linux and macOS) a terminal window can be opened. Running "vlc" should be all that is needed to open VLC:

../VLC.app/Contents/MacOS/VLC

Transcoding commandline string structure

A typical commandline string for converting a file to another format is:

vlc --sout "#transcode{[TRANSCODE_OPTIONS]}:std{[OUTPUT_OPTIONS]}" INPUT

Where INPUT is the input stream, [TRANSCODE_OPTIONS] are the options set for the desired output format, codecs, bitrate etc. and [OUTPUT_OPTIONS] are the option set for the output type. --sout is the stream output commandline option.

Example commandline: Converting an audio file to a MP3 file

An example usage might be converting an audio file to a MP3 file:

vlc --sout "#transcode{acodec=mp3,ab=128,channels=2,samplerate=44100}:std{access=file,mux=raw,dst=OUTPUT}" INPUT

Where INPUT is the input file and OUTPUT is the destination file (for example "C:\out.mp3" on Windows or "/home/username/out.mp3" on a *nix system). The above sout string is the default "Audio - MP3" profile setting accessible via the GUI. It will convert an audio input to a 128kbps CBR MP3 file (sample rate 44100Hz, 2 channels).

Other examples commandline strings

Convert an audio input to an uncompressed WAVE (*.wav) file:

vlc --sout "#transcode{acodec=s16l,channels=2,samplerate=44100}:std{access=file,mux=wav,dst=OUTPUT}" INPUT

Convert an audio input to an AAC file (MP4 container):

vlc --sout "#transcode{acodec=mp4a,ab=128,channels=2,samplerate=44100}:std{access=file,mux=mp4,dst=OUTPUT}" INPUT

Streaming

Streaming using the GUI

Streaming using the GUI is only available on the Qt interface. To stream using the GUI, open VLC, then Media [menu] -> Stream:

Launching the Wizard

Select a stream (such as a file, a network stream, a disk, a capture device ...) from the "Open Media" dialogs that pops up.

After selecting an item, the wizard is ready to begin

The following streaming methods are available for use with VLC:

• Display locally: display the stream on your screen. This allows you to display the stream you are actually streaming. Effects of transcoding, rescaling, etc. can be monitored locally using this function.
• File: Save the stream to a file.
• HTTP: Use the HTTP streaming method. Specify the TCP port number on which to listen.
• MS-WMSP (MMSH): This access method allows you to stream to Microsoft Windows Media Player. Specify the IP address and TCP port number on which to listen. Note: This will only work with the ASF encapsulation method.
• UDP: Stream in unicast by providing an address in the 0.0.0.0 - 223.255.255.255 range or in multicast by providing an address in the 224.0.0.0 - 239.255.255.255 range. It is also possible to stream to IPv6 addresses. Note: This will only work with the TS encapsulation method.
• RTP: Use the Real-Time Transfer Protocol. Like UDP, it can use both unicast and multicast addresses.
• IceCast: Stream to an IceCast server. Specify the address, port, mount point and authentication of the IceCast server to stream to.

The most common way is via HTTP. To stream via HTTP, click on "Destinations", choose HTTP from the drop down as a "New Destination" and click add. Now if you are streaming video, you will want to stream to something like "/go.mpg." Now hit stream, and you should be able to use a different instance of VLC as a client, and listen to that stream now (ex: on the same computer it would be "Media" [menu] -> Open Network Stream -> "http://localhost:8080/go.mpg" and it should work.

Wizard streaming method

A few caveats:

• even though you click on "enable transcoding" and specify some other container type, it will give you the flv container type unless you use a suffix, like ".mpg" ref
• VLC client cannot receive a stream at less than 5 fps, though it can stream it alright for those speeds (and other players can receive it). ref.
• NB that *many* times when using the GUI to stream it will choose the wrong thing. For example, if you give a path of "/" it will use FLV container type (which you probably didn't want, and which overrides your transcoding settings' container type *silently*), and if you give it "/go.mp4" it will *silently* fail (you can look at the log messages to see what the error is—it says "mp4 type is not supported except for files"). It is tricky to get it set up. It's like the GUI sets it up wrong most times. Here is a laundry list.

Select a transcoding profile that fits the codecs and access method of your stream, such as MPEG-TS, MPEG-PS, MPEG-1, Ogg, Raw, ASF, AVI, MP4 and MOV. You can also create or modify profiles by clicking the "Edit selected profile" button next to the selection combobox.

Transcoding options

Select methods to announce your stream. You can use SAP (Service Announce Protocol) or SLP (Service Location Protocol). You must also specify a channel name. The macOS interface also allows you to export the description (SDP) file of a RTP session using the internal HTTP or RTSP server of VLC, or as a file. This can be done using the according checkboxes. The SDP URL text box allows to give the url or destination where the SDP file will be available. There is a text box displays the Stream Output MRL (Media Resource Locator). This is updated as you change options in the Stream output dialog, and can be tweaked by hand if necessary.

Selecting methods to announce the stream

Click "Stream" to start streaming.

Streaming using the command line interface

See also: Documentation:Streaming HowTo/Command Line Examples

If you want to stream using the command line interface instead of the GUI (more control, for example you can specify your own container), you can "sniff" the options the GUI is using by opening up the logger (Tools menu -> message) and setting verbosity level to "2" then doing a stream. It will output debug messages that basically tell you what it is using for command line parameters, then you will take those same parameters and use them on the command line (you may need to add quotation marks around words that have spaces in them, and you may need to add --'s).

An example is in a unique command line:

C:\Program Files\VideoLAN\VLC>vlc "C:\Users\Public\Videos\Sample Videos\Wildlife.wmv":
sout=#transcode{vcodec=h264,acodec=mp3,ab=128,channels=2,samplerate=44100}:http{dst=:8090/go.mpg}

See also

• Streaming HowTo - Outdated HowTo for streaming with VLC
• Transcode - Further information about transcoding with VLC

This page is part of official VLC media player Documentation (User Guide • Streaming HowTo • Hacker Guide • Modules)
Please read the Documentation Editing Guidelines before you edit the documentation

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.