Difference between revisions of "Transcode"

From VideoLAN Wiki
Jump to navigation Jump to search
(convert old standard{url} syntax to standard{dst})
 
(49 intermediate revisions by 13 users not shown)
Line 1: Line 1:
Transcoding is the process of taking a video file and changing it to a different format or bitrate.
+
{{See also|Documentation:Modules/transcode}}
 +
{{Outdated}}
 +
Transcoding is the process of taking a video file and changing it to a different format or [[bitrate]].
  
Transcoding in VLC copies the movie to a new file in a different format, so you end up with both the original and new files. This means you need to have enough space on your hard drive to store this extra file. You should also have a reasonably fast computer, as transcoding can be very slow.
+
Transcoding in {{VLC}} copies the movie to a new file in a different format, so you end up with both the original and new files. This means you need to have enough space on your hard drive to store this extra file. You should also have a reasonably fast computer, as transcoding can be very slow.
  
In VLC, transcoding is exactly the same as [[streaming]] accross a network, except that the output is sent to a file instead of a network.
+
In VLC, transcoding is exactly the same as [[streaming]] across a network, except that the output is sent to a file instead of a network.
  
 +
== Compatibility issues ==
 +
 +
If your input streams already matches the encoding that you desire for your output stream, then you don't have to transcode at all (just leave out the transcode settings on the command line, and it will thence not transcode).  In the {{GUI}} this is called "keep the original track" (I think).
 +
 +
Note that when you decide your transcoding settings, only some container formats (muxers) can support some codecs—look at [https://www.videolan.org/streaming/features.html streaming features] compatibility matrix to see which supports what.  If your current format is incompatible with the muxer you desire, then you must transcode it to something compatible, or choose a different muxer.  If you choose an incompatible stream for a given muxer, it may silently fail.  You can look for error messages in the messages window to help you debug the failures.
  
 
== Transcoding with the Wizard ==
 
== Transcoding with the Wizard ==
  
VLC includes a transcoding and streaming wizard. To transcode a file, just select the transcode option. You will then be asked what format to convert to: you can give a video [[codec]], an audio codec and a [[container]] format. Only some container formats can support some codecs - look [http://www.videolan.org/streaming/features.html here] to see what supports what.
+
VLC includes a transcoding and streaming wizard. To transcode a file, just select the transcode option. You will then be asked what format to convert to: you can give a [[video codec]], an [[audio codec]] and a [[container]] format.
 +
<gallery>
 +
File:VLC - media menu.png|alt=|Open the Media menu and select Convert/Save
 +
File:Basic interface convert.png|alt=|The wizard
 +
File:Convert.png|alt=|The wizard on a different system
 +
File:Qt4 Streaming Transcoding.png|alt=|Choosing the codecs
 +
</gallery>
 +
 
 +
== Command-line ==
  
{{doc|http://www.videolan.org/doc/streaming-howto/en/ch02.html}}
+
The most flexible way to transcode with VLC is through a [[command-line interface]]. Transcoding works the same as [[streaming]]. For example, the following command changes an [[asf]] file to an [[MPEG-2]] file:
  
== Transcoding with the Command Prompt ==
+
{{Prompt|cmd}} {{Path to VLC|windows}} "C:\Movies\Your File.asf" --sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace}:std{access=file,mux=ps,dst="C:\Movies\Your File Output.ps.mpg"}'
  
The most flexible way to transcode with vlc is using a [[command prompt]] to start vlc. Transcoding works the same as [[streaming]]. For example, the following command changes an [[asf]] file to an [[MPEG-2]] file:
+
The <code>access=file</code> instructs vlc to store the output in a file (and not stream it), and the <code>dst</code> is the '''d'''e'''st'''ination of the new (output) file.
:vlc "C:\Movies\Your File.asf" :sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace,audio-sync}:std{access=file, mux=ps,dst="C:\Movies\Your File Output.ps.mpg"}'
 
The access=file instructs vlc to store the output in a file (and not stream it), and the dst is the location of the new (output) file.
 
  
* Note 1: If you are running VLC on [[Mac OS X]], you should use clivlc instead of VLC to avoid possible Bus error problems.
+
* Note 1: If you are running VLC on [[macOS]], you should change <code>vlc</code> to <code>vlc -I dummy</code> to avoid possible <samp>Bus error</samp> problems.
* Note 2: old VLC releases, maybe up to 0.8.6* included, use "url" instead of "dst".
+
* Note 2: old VLC releases, maybe up to 0.8.6* included, use <code>url</code> instead of <code>dst</code>.
  
Transcoding takes quite a while, so it's advisable to use an option like '''--stop-time=30''' to only encode the first 30 seconds - this means you can check the file has transcoded correctly, and that the output is of a suitable quality. (Note: On [[Mac OS X]] this trick doesn't seem to work. Just press ctrl-c after a while, VLC will properly write out the already transcoded segment)
+
Transcoding takes quite a while, so it's advisable to use an option like <code>--stop-time=30</code> to only encode the first 30 seconds&mdash;this means you can check the file has transcoded correctly, and that the output is of a suitable quality. (Note: On macOS this trick doesn't seem to work. Just press <kbd>Ctrl-C</kbd> after a while, VLC will properly write out the already transcoded segment).
  
 +
The transcode statement can contain <code>vcodec</code> and <code>vb</code> to change the [[video codec]] and <code>acodec</code> and <code>ab</code> to change the [[audio codec]]. If <code>vcodec</code> is missing, the video codec will stay the same (same for <code>acodec</code>).
  
The transcode statement can contain '''vcodec''' and '''vb''' to change the video codec and '''acodec''' and '''ab''' to change the audio codec. If vcodec is missing, the video codec will stay the same (same for acodec).
+
A common additional option to use is <code>[[deinterlace]]</code> (to increase quality slightly on interlaced video).
  
 +
=== Windows ===
  
Common additional options to use are '''audio-sync''' (to make sure the audio is in sync correctly) and '''deinterlace''' (to increase quality slightly on interlaced video).
 
===Under MS Windows===
 
 
the syntax on windows is slightly different:
 
the syntax on windows is slightly different:
  
:C:\Program Files\VideoLAN\VLC>vlc -vvv "D:\688497.flv" --sout=#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace}:standard{access=file,mux=ts,dst="D:\asd.mpg"}
+
{{Prompt|cmd}} {{Path to VLC|windows}} --no-repeat --no-loop -vv "D:\688497.flv" --sout='#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace}:standard{access=file,mux=ts,dst="D:\asd.mpg"}'
(Note: old VLC releases, maybe up to 0.8.6* included, use "url" instead of "dst")
+
 
 +
(Note: old VLC releases, maybe up to 0.8.6* included, use <code>url</code> instead of <code>dst</code>)
 +
 
 +
(Note: due to command line parsing, at times, especially within single and double quote blocks, a backslash may have to be escaped by using a double backslash so that a filename would be <code>D:\\path\\to\\file.mpg</code>)
 +
 
 +
(Note: without the options <code>--no-repeat</code> <code>--no-loop</code>, you may find that loop options selected in the {{GUI}} cause transcodes to fail.)
 +
 
 +
=== Completely non-interactive transcoding ===
 +
 
 +
For completely non-interactive transcoding (such as the case necessary when running under [[macOS]]), the above example could be rewritten as:
 +
 
 +
{{$}} {{Path to VLC|mac}} --no-repeat --no-loop -I dummy /Users/<username>/Documents/Your File.asf --sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace}:std{access=file, mux=ps,dst="/Users/<username>/Documents/Your File Output.ps.mpg"}' vlc://quit
  
===Completely non-interactive transcoding===
 
For completely non-interactive transcoding (such as the case necessary when running under [[Mac OS X]]), the above example could be rewritten as
 
:vlc -I dummy "C:\Movies\Your File.asf" :sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace,audio-sync}:std{access=file, mux=ps,dst="C:\Movies\Your File Output.ps.mpg"}' vlc://quit
 
 
The two extra options are
 
The two extra options are
;-I dummy: Disables the graphical interface
+
* -I dummy: Disables the graphical interface
;<nowiki>vlc://quit</nowiki>: Quit VLC after transcoding
+
* <nowiki>vlc://quit</nowiki>: Quit VLC after transcoding
If transcoding from a DVD, it is also necessary to use the dvdsimple:// notation instead of the dvd:// notation, in order to avoid interacting with the DVD menu system (which is quite impossible without the graphical interface).
+
If transcoding from a DVD, it is also necessary to use the <code>dvdsimple://</code> notation instead of the <code>dvd://</code> notation, in order to avoid interacting with the DVD menu system. You can use this in the {{GUI}} by choosing ''no DVD menus'' option when opening the disc.  See [[Rip DVD]].
 +
 
 +
If the <code>-I dummy</code> option spawns an extra command prompt with error-message <samp>vbv buffer overflow</samp> you may try <code>-I rc</code> instead, which would ordinarily open a text interface but&nbsp;&ndash; under Windows&nbsp;&ndash; behaves exactly like the <code>dummy</code> interface.
 +
 
 +
== Video Filters ==
 +
=== Canvas and Padding ===
 +
 
 +
'''The canvas and padding options changed since Version 0.9. Most examples in the wiki are broken.'''
 +
 
 +
<pre>transcode{vcodec=mp2v,vfilter=canvas{width=640,height=480}}</pre>
 +
 
 +
Other options:
 +
* aspect=4:3 : Aspect ratio
 +
* padd:
 +
** true: Pad with black bars
 +
** false: crop video
 +
 
 +
<pre>transcode{vcodec=mp2v,vfilter=croppadd{croptop=20,cropbottom=30,paddleft=100}}</pre>
  
{{doc|http://www.videolan.org/doc/streaming-howto/en/ch03.html}}
+
crop or pad top, left, right or bottom in pixels.
  
 +
=== Rotation example ===
 +
 +
<pre>vlc --no-repeat --no-loop -I dummy -vv InputFile.mov --sout-avcodec-strict=-2 --transform-type=180 --sout=#transcode{vcodec="h264",vb="1500",acodec="mp4a",ab="96","channels=2",samplerate="44100",vfilter="transform"}:standard{access="file",mux="mp4",dst="OutputFile.mp4"} vlc://quit</pre>
 +
 +
Options for transform-type: 90,180,270,hflip,vflip,transpose,antitranspose
 +
 +
Avoid using <code>width</code> and <code>height</code> parameters, also <code>maxwidth</code> and <code>maxheight</code>! These are applied before the <code>vfilter</code> and might result in unwanted results.
 +
 +
== Non-Interactive Batch Transcoding (Windows) ==
 +
=== Batch File ===
  
== Non-Interactive Batch Transcoding (Windows)==
 
 
To transcode several files without user interaction create a batch file in the folder where the files are contained and this line to the batch file:
 
To transcode several files without user interaction create a batch file in the folder where the files are contained and this line to the batch file:
 +
<syntaxhighlight lang="dos">for %%a in (*.FILE_EXT) do cmd /c "PATH_TO_VLC" --no-repeat --no-loop -I dummy -vv %%a --sout=#transcode{vcodec=VIDEO_CODEC,vb=VIDEO_BITRATE,scale=1,acodec=AUDIO_CODEC,ab=AUDIO_BITRATE,channels=6}:standard{access=file,mux=MUXER,dst=%%a.OUTPUT_EXT} vlc://quit</syntaxhighlight>
  
<pre>
+
* note: if the line above creates "double file name extensions" like <samp>*.FILE_EXT.OUTPUT_EXT</samp> (e.g. <samp>*.mp3.wav</samp> when converting mp3 to wav), try:
for %%a in (*.FILE_EXT) do cmd /c "PATH_TO_VLC" -I dummy -vvv %%a --sout=#transcode{vcodec=VIDEO_CODEC,vb=VIDEO_BITRATE,scale=1,acodec=AUDIO_CODEC,ab=AUDIO_BITRATE,channels=6}:standard{access=file,mux=MUXER,dst=%%a.OUTPUT_EXT} vlc://quit
+
:<syntaxhighlight lang="dos">... dst=OUTPUT_PATH\%%~na.OUTPUT_EXT ...</syntaxhighlight>
</pre>
 
  
Cmd /c makes the script wait to finish transcoding before starting the next transcode.
+
<div class="plainlist">
 +
* <code>%%~na</code> is the file name of <code>%%a</code> only without extension.
 +
* <code>Cmd /c</code> makes the script wait to finish transcoding before starting the next transcode.
 +
</div>
  
An alternative method is to use VB Script. This example will transcode all files from one folder to another. It will also wait for each file to finish transcoding before starting the next. Create the script transcode.vbs, in the VLC installation folder, default "C:\Program Files\VideoLAN\VLC". Change the strSource and strTarget in the example to match your requirements. Start a "DOS Box", Start - Run - cmd then change to the VLC folder and run the script "cscript transcode.vbs".
+
* Example: to convert all mp3-files in the current directory to standard uncompressed wav-files ([[PCM]]; may be suitable if you want to burn audio-cds and your player is unable to play *.mp3-files), type:
 +
:<syntaxhighlight lang="dos">for %%a in (*.mp3) do cmd /c "C:\Programme\VideoLAN\VLC\vlc.exe" -I dummy -vv %%a --sout #transcode{acodec=s16l,channels=2,samplerate=44100}:standard{access=file,mux=wav,dst=g:\_audio_conv\%%a.wav} vlc://quit</syntaxhighlight>
  
This example was tested on Microsoft Windows Script host 5.6 running on XP Pro SP2
+
=== VB Script ===
  
<pre>
+
An alternative method is to use VB Script. This example will transcode all files from one folder to another. It will also wait for each file to finish transcoding before starting the next. Create the script <code>transcode.vbs</code>, in the VLC installation folder, default <code>{{Path to VLC|windows|dir=y}}</code>. Change the <code>strSource</code> and <code>strTarget</code> in the example to match your requirements. Start a "[[Command prompt|DOS Box]]", Start → Run → cmd then change to the VLC folder and run the script <code>"cscript transcode.vbs"</code>.
 +
 
 +
This example was tested on Microsoft Windows Script host 5.6 running on XP Pro SP2:
 +
<syntaxhighlight lang="vb">
 
'
 
'
 
' based on code from:http://episteme.arstechnica.com/eve/forums/a/tpc/f/12009443/m/516001349831
 
' based on code from:http://episteme.arstechnica.com/eve/forums/a/tpc/f/12009443/m/516001349831
Line 122: Line 176:
 
Next
 
Next
 
End Sub
 
End Sub
</pre>
+
</syntaxhighlight>
 +
 
 +
== Non-Interactive Batch Transcoding (Linux) ==
  
== Non-Interactive Batch Transcoding (Linux)==
 
 
To transcode several files without user interaction create a bash script in the folder where the files are contained and add these lines to the bash script:
 
To transcode several files without user interaction create a bash script in the folder where the files are contained and add these lines to the bash script:
 
+
<syntaxhighlight lang="bash">
<pre>
 
 
#!/bin/bash
 
#!/bin/bash
 
vcodec="VIDEO_CODEC"  
 
vcodec="VIDEO_CODEC"  
Line 139: Line 193:
  
 
for a in *$fmt; do  
 
for a in *$fmt; do  
$vlc -I dummy -vvv "$a" --sout "#transcode{vcodec=$vcodec,vb=$bitrate,acodec=$acodec,ab=$arate,channels=6}:standard{mux=$mux,dst=\"$a.$ext\",access=file}"vlc://quit  
+
$vlc -I dummy -vv "$a" --sout "#transcode{vcodec=$vcodec,vb=$bitrate,acodec=$acodec,ab=$arate,channels=6}:standard{mux=$mux,dst=\"$a.$ext\",access=file}" vlc://quit  
 
done
 
done
</pre>
+
</syntaxhighlight>
  
===Non-Interactive Merge/Transcode (Windows)===
+
=== Non-Interactive Merge/Transcode (Windows) ===
  
If you have more than one source files that need to be merged and transcoded resulting in a single out put file create a batch script with the following line in it:
+
If you have more than one source files that need to be merged and transcoded resulting in a single output file, see [[How to Merge and Transcode Multiple Videos]].
  
<pre>
+
=== Example script ===
"PATH_TO_VLC" -vvv FILE1.EXT FILE2.EXT FILE3.EXT ETC.ETC --sout-keep --sout=#gather{} --sout=#transcode{vcodec=h264,vb=1024,scale=1,acodec=mp4a,ab=192,channels=6}:standard{access=file,mux=ts,dst=out.mpg} --sout-all
 
</pre>
 
  
 +
'''The canvas and cropping must be adjusted for VLC versions newer then 0.9.'''
  
===Example script===
+
As an example, here is a bash script that will take a <code>.mpg</code> file as generated by an [[DVB]] capture device and transcode it into an [[MPEG4]] file using the [[h.264]] codec. Copy it to a file, for example <code>dvb2mp4</code>, and make it executable. It should work on any operating system that has bash, including windows if [https://www.cygwin.com Cygwin] is installed. It uses the cropping parameters proposed at [[Wikipedia:Overscan amounts|overscan amounts]] adapted so that the dimensions are divisible by 16 for better encoding.
As an example, here is a bash script that will take a <tt>.mpg</tt> file as generated by an DVB capture device and transcode it into an MPEG4 file using the h.264 codec. Copy it to a file, for example <tt>dvb2mp4</tt>, and make it executable. It should work on any operating system that has bash, including windows if [http://www.cygwin.com Cygwin] is installed. It uses the cropping parameters proposed at [[Wikipedia:Overscan_amounts]] adapted so that the dimensions are divisible by 16 for better encoding.
 
  
<pre>
+
<syntaxhighlight lang="bash">
 
#!/bin/bash
 
#!/bin/bash
 
#
 
#
Line 262: Line 314:
 
echo "Encoding at $bitrate+$arate kb/s, input $src, $aspect, cropping $crop, de-interlace $deint"
 
echo "Encoding at $bitrate+$arate kb/s, input $src, $aspect, cropping $crop, de-interlace $deint"
 
echo
 
echo
echo '>>>' $VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate,acodec=mp4a,ab=$arate}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit
+
echo '>>>' $VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate, acodec=mpga,ab=$arate,channels=2,samplerate=44100}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit
 
echo
 
echo
$VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate,acodec=mp4a,ab=$arate}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit
+
$VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate, acodec=mpga,ab=$arate,channels=2,samplerate=44100}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit
</pre>
+
</syntaxhighlight>
  
 
[[Category:Glossary]]
 
[[Category:Glossary]]
 +
[[Category:Transcoding]]

Latest revision as of 10:03, 8 April 2019

This page is outdated and information might be incorrect.
Create an account to start editing, and then click here to update this article.

Transcoding is the process of taking a video file and changing it to a different format or bitrate.

Transcoding in VLC media player copies the movie to a new file in a different format, so you end up with both the original and new files. This means you need to have enough space on your hard drive to store this extra file. You should also have a reasonably fast computer, as transcoding can be very slow.

In VLC, transcoding is exactly the same as streaming across a network, except that the output is sent to a file instead of a network.

Compatibility issues

If your input streams already matches the encoding that you desire for your output stream, then you don't have to transcode at all (just leave out the transcode settings on the command line, and it will thence not transcode). In the GUI this is called "keep the original track" (I think).

Note that when you decide your transcoding settings, only some container formats (muxers) can support some codecs—look at streaming features compatibility matrix to see which supports what. If your current format is incompatible with the muxer you desire, then you must transcode it to something compatible, or choose a different muxer. If you choose an incompatible stream for a given muxer, it may silently fail. You can look for error messages in the messages window to help you debug the failures.

Transcoding with the Wizard

VLC includes a transcoding and streaming wizard. To transcode a file, just select the transcode option. You will then be asked what format to convert to: you can give a video codec, an audio codec and a container format.

Command-line

The most flexible way to transcode with VLC is through a command-line interface. Transcoding works the same as streaming. For example, the following command changes an asf file to an MPEG-2 file:

> "%PROGRAMFILES%\VideoLAN\VLC\vlc.exe" "C:\Movies\Your File.asf" --sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace}:std{access=file,mux=ps,dst="C:\Movies\Your File Output.ps.mpg"}'

The access=file instructs vlc to store the output in a file (and not stream it), and the dst is the destination of the new (output) file.

  • Note 1: If you are running VLC on macOS, you should change vlc to vlc -I dummy to avoid possible Bus error problems.
  • Note 2: old VLC releases, maybe up to 0.8.6* included, use url instead of dst.

Transcoding takes quite a while, so it's advisable to use an option like --stop-time=30 to only encode the first 30 seconds—this means you can check the file has transcoded correctly, and that the output is of a suitable quality. (Note: On macOS this trick doesn't seem to work. Just press Ctrl-C after a while, VLC will properly write out the already transcoded segment).

The transcode statement can contain vcodec and vb to change the video codec and acodec and ab to change the audio codec. If vcodec is missing, the video codec will stay the same (same for acodec).

A common additional option to use is deinterlace (to increase quality slightly on interlaced video).

Windows

the syntax on windows is slightly different:

> "%PROGRAMFILES%\VideoLAN\VLC\vlc.exe" --no-repeat --no-loop -vv "D:\688497.flv" --sout='#transcode{vcodec=mp4v,acodec=mpga,vb=800,ab=128,deinterlace}:standard{access=file,mux=ts,dst="D:\asd.mpg"}'

(Note: old VLC releases, maybe up to 0.8.6* included, use url instead of dst)

(Note: due to command line parsing, at times, especially within single and double quote blocks, a backslash may have to be escaped by using a double backslash so that a filename would be D:\\path\\to\\file.mpg)

(Note: without the options --no-repeat --no-loop, you may find that loop options selected in the GUI cause transcodes to fail.)

Completely non-interactive transcoding

For completely non-interactive transcoding (such as the case necessary when running under macOS), the above example could be rewritten as:

$ /Applications/VLC.app/Contents/MacOS/VLC --no-repeat --no-loop -I dummy /Users/<username>/Documents/Your File.asf --sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace}:std{access=file, mux=ps,dst="/Users/<username>/Documents/Your File Output.ps.mpg"}' vlc://quit

The two extra options are

  • -I dummy: Disables the graphical interface
  • vlc://quit: Quit VLC after transcoding

If transcoding from a DVD, it is also necessary to use the dvdsimple:// notation instead of the dvd:// notation, in order to avoid interacting with the DVD menu system. You can use this in the GUI by choosing no DVD menus option when opening the disc. See Rip DVD.

If the -I dummy option spawns an extra command prompt with error-message vbv buffer overflow you may try -I rc instead, which would ordinarily open a text interface but – under Windows – behaves exactly like the dummy interface.

Video Filters

Canvas and Padding

The canvas and padding options changed since Version 0.9. Most examples in the wiki are broken.

transcode{vcodec=mp2v,vfilter=canvas{width=640,height=480}}

Other options:

  • aspect=4:3 : Aspect ratio
  • padd:
    • true: Pad with black bars
    • false: crop video
transcode{vcodec=mp2v,vfilter=croppadd{croptop=20,cropbottom=30,paddleft=100}}

crop or pad top, left, right or bottom in pixels.

Rotation example

vlc --no-repeat --no-loop -I dummy -vv InputFile.mov --sout-avcodec-strict=-2 --transform-type=180 --sout=#transcode{vcodec="h264",vb="1500",acodec="mp4a",ab="96","channels=2",samplerate="44100",vfilter="transform"}:standard{access="file",mux="mp4",dst="OutputFile.mp4"} vlc://quit

Options for transform-type: 90,180,270,hflip,vflip,transpose,antitranspose

Avoid using width and height parameters, also maxwidth and maxheight! These are applied before the vfilter and might result in unwanted results.

Non-Interactive Batch Transcoding (Windows)

Batch File

To transcode several files without user interaction create a batch file in the folder where the files are contained and this line to the batch file:

for %%a in (*.FILE_EXT) do cmd /c "PATH_TO_VLC" --no-repeat --no-loop -I dummy -vv %%a --sout=#transcode{vcodec=VIDEO_CODEC,vb=VIDEO_BITRATE,scale=1,acodec=AUDIO_CODEC,ab=AUDIO_BITRATE,channels=6}:standard{access=file,mux=MUXER,dst=%%a.OUTPUT_EXT} vlc://quit
  • note: if the line above creates "double file name extensions" like *.FILE_EXT.OUTPUT_EXT (e.g. *.mp3.wav when converting mp3 to wav), try:
... dst=OUTPUT_PATH\%%~na.OUTPUT_EXT ...
  • %%~na is the file name of %%a only without extension.
  • Cmd /c makes the script wait to finish transcoding before starting the next transcode.
  • Example: to convert all mp3-files in the current directory to standard uncompressed wav-files (PCM; may be suitable if you want to burn audio-cds and your player is unable to play *.mp3-files), type:
for %%a in (*.mp3) do cmd /c "C:\Programme\VideoLAN\VLC\vlc.exe" -I dummy -vv %%a --sout #transcode{acodec=s16l,channels=2,samplerate=44100}:standard{access=file,mux=wav,dst=g:\_audio_conv\%%a.wav} vlc://quit

VB Script

An alternative method is to use VB Script. This example will transcode all files from one folder to another. It will also wait for each file to finish transcoding before starting the next. Create the script transcode.vbs, in the VLC installation folder, default "%PROGRAMFILES%\VideoLAN\VLC". Change the strSource and strTarget in the example to match your requirements. Start a "DOS Box", Start → Run → cmd then change to the VLC folder and run the script "cscript transcode.vbs".

This example was tested on Microsoft Windows Script host 5.6 running on XP Pro SP2:

'
' based on code from:http://episteme.arstechnica.com/eve/forums/a/tpc/f/12009443/m/516001349831
'
'
'
Dim objFSO, objShell, strSource, strTarget, strOldName, strNewName
'
set objFSO = CreateObject("Scripting.FileSystemObject")
'
' Set up starting folders
'
strSource = "O:\"
strTarget = "N:\"
'
call RecurseDir(strSource, strTarget)
'
' // Recursively copy all files and folders
'
Sub RecurseDir(strSource, strTarget)
	wscript.echo "source: " & strSource & " target: "& strTarget
'
	Dim strTempSource, strTempTarget
'
	Set strTempSource = objFSO.GetFolder(strSource)
'
	Wscript.Echo "Begin Value: " & strTarget
'    
	If Not objFSO.FolderExists(strTarget) Then
'        Wscript.Echo "No Folder! Creating folder [" & strTarget & "]"
		objFSO.CreateFolder(strTarget)
	Else
		Wscript.Echo "Folder exists! " & strTempTarget
	End If
'
	Set strTempTarget = objFSO.GetFolder(strTarget)
' ** Copy files from current directory to target
	For each file in strTempSource.files
		strOldName = strSource & "\" & file.name
		strNewName = strTempTarget & "\" & Mid(file.name, 1, InstrRev(file.name, ".")) & "ts"
'
		If Not objFSO.FileExists(strNewName) Then
			Set objShell = CreateObject("WScript.Shell")
'
			Wscript.Echo "Transcoding file: " & strOldName & " to " & strNewName
'		
			Select Case Right(strOldName, 3) 
				Case "avi" 
					wscript.echo "vlc file://""" & strOldName & """ :sout=#duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc://quit"
					objShell.Run "vlc file://""" & strOldName & """ :sout=#duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc://quit", 1, True
				Case "mp4"
					wscript.echo "vlc file://""" & strOldName & """ :sout=#transcode{vcodec=mp2v,vb=1024,scale=1,acodec=mp2a,ab=192,channels=2}:duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc://quit"
					objShell.Run "vlc file://""" & strOldName & """ :sout=#transcode{vcodec=mp2v,vb=1024,scale=1,acodec=mp2a,ab=192,channels=2}:duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc://quit", 1, True
			End Select 
'
			Set objShell = Nothing
		End If
	Next
' ** For each subfolder of current dir, copy files to target and recurse its subdirs
	For each subdir in strTempSource.subfolders
	  Wscript.Echo subdir.path
  	call RecurseDir(subdir.path, strTempTarget & "\" & subdir.name)
	Next
End Sub

Non-Interactive Batch Transcoding (Linux)

To transcode several files without user interaction create a bash script in the folder where the files are contained and add these lines to the bash script:

#!/bin/bash
vcodec="VIDEO_CODEC" 
acodec="AUDIO_CODEC" 
bitrate="VIDEO_BITRATE" 
arate="AUDIO_BITRATE" 
ext="OUTPUT_EXT" 
mux="MUXER" 
vlc="PATH_TO_VLC" 
fmt="INPUT_EXT" 

for a in *$fmt; do 
$vlc -I dummy -vv "$a" --sout "#transcode{vcodec=$vcodec,vb=$bitrate,acodec=$acodec,ab=$arate,channels=6}:standard{mux=$mux,dst=\"$a.$ext\",access=file}" vlc://quit 
done

Non-Interactive Merge/Transcode (Windows)

If you have more than one source files that need to be merged and transcoded resulting in a single output file, see How to Merge and Transcode Multiple Videos.

Example script

The canvas and cropping must be adjusted for VLC versions newer then 0.9.

As an example, here is a bash script that will take a .mpg file as generated by an DVB capture device and transcode it into an MPEG4 file using the h.264 codec. Copy it to a file, for example dvb2mp4, and make it executable. It should work on any operating system that has bash, including windows if Cygwin is installed. It uses the cropping parameters proposed at overscan amounts adapted so that the dimensions are divisible by 16 for better encoding.

#!/bin/bash
#
# Transcode DVB TV signals to h.264-encoded MP4 files using VLC
# Wout.Mertens@gmail.com

#### Defaults, please edit for your settings ####

# VLC location, here is the Mac OS X example
VLC=/Applications/VLC.app/Contents/MacOS/clivlc
# Other possibilities: (Remove the # to activate)
#VLC=/usr/bin/vlc
#VLC=/usr/local/bin/vlc

# 16:9 or 4:3
aspect=16:9

# PAL (Europe) or NTSC (US)
src=PAL

# video bitrate
bitrate=1024

# audio bitrate
arate=128

# cropping?
crop=yes

# Deinterlace?
deint=yes

#### Program, do not change below this line ####
usage() {
	cat 1>&2 <<EOF
Usage: $0 [-swpncC] [-b <rate>] [-a <rate>] <DVB source .mpg> <MP4 output file>
	-s	4:3 aspect ratio (default=$aspect)
	-w	16:9 aspect ratio
	-p	PAL (720x576) input (default=$src)
	-n	NTSC (720x480) input
	-c	Crop borders (default=$crop)
	-C	Do not crop borders
	-d	Perform de-interlacing (default=$deint)
	-D	Do not perform de-interlacing
	-b	video bitrate kb/s (default=$bitrate)
	-a	audio bitrate kb/s (default=$arate)
EOF
	exit 1
}

error() {
	echo "ERROR: $*" 1>&2
	exit 2
}

while getopts 'swpncCb:a:h' opt; do
	case $opt in
		s) aspect=4:3 ;;
		w) aspect=16:9 ;;
		p) src=PAL ;;
		n) src=NTSC ;;
		c) crop=yes ;;
		C) crop=no ;;
		d) deint=yes ;;
		D) deint=no ;;
		b) bitrate=$OPTARG ;;
		a) arate=$OPTARG ;;
		h) usage ;;
		*) echo "Unknown option $opt" 1>&2; usage ;;
	esac
done
shift $(( $OPTIND - 1 ))

[ $# -ne 2 ] && usage

infile="$1"
outfile="$2"
case $outfile in
	*.mp4|*.MP4) : ;;
	*) outfile="$outfile.mp4" ;;
esac

[ -r "$infile" ] || error "Can't read from $infile"

case "$src,$aspect,$crop" in
	PAL,16:9,yes) sizestr="cropleft=31,cropright=31,croptop=16,cropbottom=16,width=960,height=544" ;;
	PAL,4:3,yes)  sizestr="cropleft=31,cropright=31,croptop=16,cropbottom=16,width=720,height=544" ;;
	NTSC,16:9,yes) sizestr="cropleft=30,cropright=30,croptop=17,cropbottom=17,width=800,height=448" ;;
	NTSC,4:3,yes) sizestr="cropleft=26,cropright=26,croptop=17,cropbottom=17,width=608,height=448" ;;
	PAL,16:9,no) sizestr="width=1024,height=576" ;;
	PAL,4:3,no) sizestr="width=768,height=576" ;;
	NTSC,16:9,no) sizestr="width=800,height=448" ;;
	NTSC,4:3,no) sizestr="width=608,height=448" ;;
	*) error "Could not handle $src,$aspect,$crop. This shouldn't happen!" ;;
esac

if [ "$deint" = "yes" ]; then
	deintstr=",deinterlace=enable"
else
	deintstr=
fi

# Let's do it
echo "Input file: $infile"
echo "Output file: $outfile"
echo "Encoding at $bitrate+$arate kb/s, input $src, $aspect, cropping $crop, de-interlace $deint"
echo
echo '>>>' $VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate, acodec=mpga,ab=$arate,channels=2,samplerate=44100}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit
echo
$VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate, acodec=mpga,ab=$arate,channels=2,samplerate=44100}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc://quit