Difference between revisions of "VLC command-line help"

From VideoLAN Wiki
Jump to navigation Jump to search
m (explanation of the location of the debug info)
 
(24 intermediate revisions by 9 users not shown)
Line 1: Line 1:
−
:''See also [[Command line]], [[Console|Console interfaces]]''
+
{{See also|Command-line interface|Console|label2=Console interfaces}}
 +
{{WindowsCLI}}
 
Running the command
 
Running the command
 
  vlc --help
 
  vlc --help
−
will create a .TXT file containnig all the command-line options.
+
will create a .TXT file containing all the command-line options.
 +
 
 +
You can also use this to get more exhaustive list:
 +
vlc -H
  
 
If you look for help, on a particular module, you can also use
 
If you look for help, on a particular module, you can also use
−
  vlc -p module --advanced
+
  vlc -p module --advanced --help-verbose
 +
<code>--help-verbose</code> explains things. Omit this option if too much output is generated
 +
 
 +
To view this without leaving the command-line in Windows, use the following command (assuming you installed it in the default folder):
 +
more "{{VLC folder|windows}}\vlc-help.txt"
 +
This trick uses the command-line command <code>more</code> to show the file screen-by-screen. Pressing spacebar will advance the output a screen at a time, and pressing enter will advance the output one line at a time.
  
 
Undocumented option:
 
Undocumented option:
−
  -vvv     "Verbose verbose verbose". Verbose output (debug infos can be displayed by selecting "Debug logging" interface under View->Add Interface menu)
+
-vv     "Verbose verbose". Verbose output (debug infos can be displayed by selecting "Debug logging" interface under View->Add Interface menu)
  
−
Here's the output of ''vlc -H'' of the stable 1.1.10 under Windows. If you are looking for 0.8.6 help, go [[VLC-0-8-6_command-line_help]]. If you are looking for 0.9.x help, go [[VLC-0-9-x_command-line_help]]. If you are looking for 1.0.x help, go [[VLC-1-0-x_command-line_help]]
+
Here's the output of ''vlc -H'' of vlc-4.0.0-dev under Windows. If the text is too small, pressing <kbd>Ctrl</kbd> and <kbd>+</kbd> together in most browsers will increase the font size (reset with <kbd>Ctrl</kbd> and <kbd>0</kbd> together).
  
−
Part 1/2
+
<small><pre>
−
  <nowiki>
 
 
Usage: vlc [options] [stream] ...
 
Usage: vlc [options] [stream] ...
−
You can specify multiple streams on the commandline. They will be enqueued in the playlist.
+
You can specify multiple streams on the commandline.
 +
They will be enqueued in the playlist.
 
The first item specified will be played first.
 
The first item specified will be played first.
  
Line 25: Line 34:
  
 
Stream MRL syntax:
 
Stream MRL syntax:
−
   [[access][/demux]://]URL[@[title][:chapter][-[title][:chapter]]] [:option=value ...]
+
   [[access][/demux]://]URL[#[title][:chapter][-[title][:chapter]]]
 +
  [:option=value ...]
  
 
   Many of the global --options can also be used as MRL specific :options.
 
   Many of the global --options can also be used as MRL specific :options.
Line 31: Line 41:
  
 
URL syntax:
 
URL syntax:
−
   [file://]filename             Plain media file
+
   file:///path/file             Plain media file
−
   http://ip:port/file           HTTP URL
+
   http://host[:port]/file       HTTP URL
−
   ftp://ip:port/file             FTP URL
+
   ftp://host[:port]/file         FTP URL
−
   mms://ip:port/file             MMS URL
+
   mms://host[:port]/file         MMS URL
 
   screen://                      Screen capture
 
   screen://                      Screen capture
−
   [dvd://][device][@raw_device]  DVD device
+
   dvd://[device]                 DVD device
−
   [vcd://][device]               VCD device
+
   vcd://[device]                 VCD device
−
   [cdda://][device]             Audio CD device
+
   cdda://[device]               Audio CD device
 
   udp://[[<source address>]@[<bind address>][:<bind port>]]
 
   udp://[[<source address>]@[<bind address>][:<bind port>]]
 
                                 UDP stream sent by a streaming server
 
                                 UDP stream sent by a streaming server
−
   vlc://pause:<seconds>          Special item to pause the playlist for a certain time
+
   vlc://pause:<seconds>          Pause the playlist for a certain time
 
   vlc://quit                    Special item to quit VLC
 
   vlc://quit                    Special item to quit VLC
  
−
No matching module found. Use --list or --list-verbose to list available modules.
 
  
−
  VBI and Teletext decoder
+
  Visualizer filter (visual)
−
       --vbi-page=<integer>      Teletext page
+
  General:
−
           Open the indicated Teletext page.Default page is index 100
+
      --effect-list=<string>    Effects list
−
       --vbi-opaque, --no-vbi-opaque
+
          A list of visual effect, separated by commas. Current effects
−
                                 Text is always opaque (default enabled)
+
          include: dummy, scope, spectrum, spectrometer and vuMeter.
−
           Setting vbi-opaque to false makes the boxed text transparent.
+
       --effect-width=<integer>   Video width
−
          (default enabled)
+
          The width of the effects video window, in pixels.
−
       --vbi-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
       --effect-height=<integer>  Video height
−
                                 Teletext alignment
+
           The height of the effects video window, in pixels.
−
           You can enforce the teletext position on the video (0=center, 1=left,
+
      --effect-fft-window={none,hann,flattop,blackmanharris,kaiser}
−
           2=right, 4=top, 8=bottom, you can also use combinations of these
+
                                FFT window
−
           values, eg. 6 = top-right).
+
          The type of FFT window to use for spectrum-based visualizations.
−
       --vbi-text, --no-vbi-text  Teletext text subtitles (default disabled)
+
       --effect-kaiser-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
           Output teletext subtitles as text instead of as RGBA (default
+
                                Kaiser window parameter
−
           disabled)
+
          The parameter alpha for the Kaiser window. Increasing alpha increases
−
 
+
          the main-lobe width and decreases the side-lobe amplitude.
−
YUV video output
+
  Spectrum analyser:
−
       --yuv-file=<string>       device, fifo or filename
+
      --visual-80-bands, --no-visual-80-bands
−
           device, fifo or filename to write yuv frames too.
+
                                Show 80 bands instead of 20
−
       --yuv-chroma=<string>      Chroma used
+
                                 (default enabled)
−
           Force use of a specific chroma for output. Default is I420.
+
           Show 80 bands instead of 20
−
       --yuv-yuv4mpeg2, --no-yuv-yuv4mpeg2
+
      --visual-peaks, --no-visual-peaks
−
                                 YUV4MPEG2 header (default disabled) (default
+
                                Draw peaks in the analyzer
−
                                disabled)
+
                                (default enabled)
−
          The YUV4MPEG2 header is compatible with mplayer yuv video ouput and
+
          Draw peaks in the analyzer
−
           requires YV12/I420 fourcc. By default vlc writes the fourcc of the
+
  Spectrometer:
−
          picture frame into the output destination. (default disabled)
+
       --spect-show-original, --no-spect-show-original
−
 
+
                                Enable original graphic spectrum
−
H.264/MPEG4 AVC encoder (x264)
+
                                (default disabled)
−
       --sout-x264-keyint=<integer>
+
          Enable the "flat" spectrum analyzer in the spectrometer.
−
                                 Maximum GOP size
+
      --spect-show-base, --no-spect-show-base
−
           Sets maximum interval between IDR-frames.Larger values save bits,
+
                                Draw the base of the bands
−
          thus improving quality for a given bitrate at the cost of seeking
+
                                 (default enabled)
−
          precision.
+
           Draw the base of the bands
−
       --sout-x264-min-keyint=<integer>
+
      --spect-radius=<integer>  Base pixel radius
−
                                 Minimum GOP size
+
           Defines radius size in pixels, of base of bands(beginning).
−
           Sets minimum interval between IDR-frames. In H.264, I-frames do not
+
      --spect-sections=<integer [1 .. 2147483647]>
−
          necessarily bound a closed GOP because it is allowable for a P-frame
+
                                Spectral sections
−
          to be predicted from more frames than just the one frame before it
+
           Determines how many sections of spectrum will exist.
−
          (also see reference frame option). Therefore, I-frames are not
+
      --spect-color=<integer>    V-plane color
−
          necessarily seekable. IDR-frames restrict subsequent P-frames from
+
          YUV-Color cube shifting across the V-plane ( 0 - 127 ).
−
           referring to any frame prior to the IDR-frame.
+
       --spect-show-bands, --no-spect-show-bands
−
If scenecuts appear
+
                                Draw bands in the spectrometer
−
          within this interval, they are still encoded as I-frames, but do not
+
                                (default enabled)
−
          start a new GOP.
+
           Draw bands in the spectrometer
−
       --sout-x264-scenecut=<integer [-1 .. 100]>
+
      --spect-80-bands, --no-spect-80-bands
−
                                 Extra I-frames aggressivity
+
                                Show 80 bands instead of 20
−
           Scene-cut detection. Controls how aggressively to insert extra
+
                                (default enabled)
−
          I-frames. With small values of scenecut, the codec often has to force
+
           Show 80 bands instead of 20
−
          an I-frame when it would exceed keyint. Good values of scenecut may
+
       --spect-separ=<integer>   Number of blank pixels between bands.
−
           find a better location for the I-frame. Large values use more
+
           Number of blank pixels between bands.
−
          I-frames than necessary, thus wasting bits. -1 disables scene-cut
+
       --spect-amp=<integer>      Amplification
−
           detection, so I-frames are inserted only every other keyint frames,
+
           This is a coefficient that modifies the height of the bands.
−
          which probably leads to ugly encoding artifacts. Range 1 to 100.
+
       --spect-show-peaks, --no-spect-show-peaks
−
       --sout-x264-bframes=<integer [0 .. 16]>
+
                                Draw peaks in the analyzer
−
                                 B-frames between I and P
+
                                 (default enabled)
−
           Number of consecutive B-frames between I and P-frames. Range 1 to 16.
+
           Draw peaks in the analyzer
−
       --sout-x264-b-adapt=<integer [0 .. 2]>
+
       --spect-peak-width=<integer>  
−
                                Adaptive B-frame decision
+
                                 Peak extra width
−
           Force the specified number of consecutive B-frames to be used, except
+
           Additions or subtractions of pixels on the peak width.
−
          possibly before an I-frame.Range 0 to 2.
+
       --spect-peak-height=<integer>  
−
       --sout-x264-b-bias=<integer [-100 .. 100]>
+
                                 Peak height
−
                                Influence (bias) B-frames usage
+
           Total pixel height of the peak items.
−
           Bias the choice to use B-frames. Positive values cause more B-frames,
+
 
−
          negative values cause less B-frames.
+
libprojectM effect (projectm)
−
       --sout-x264-bpyramid={none,strict,normal}
+
      --projectm-preset-path=<string>
−
                                 Keep some B-frames as references
+
                                projectM preset path
−
           Allows B-frames to be used as references for predicting other frames.
+
           Path to the projectM preset directory
−
          Keeps the middle of 2+ consecutive B-frames as a reference, and
+
       --projectm-title-font=<string>  
−
          reorders frame appropriately.
+
                                 Title font
−
- none: Disabled
+
           Font used for the titles
−
- strict: Strictly
+
      --projectm-menu-font=<string>
−
          hierarchical pyramid
+
                                Font menu
−
- normal: Non-strict (not Blu-ray compatible)
+
           Font used for the menus
 +
      --projectm-width=<integer> Video width
 +
           The width of the video window, in pixels.
 +
       --projectm-height=<integer>  
 +
                                 Video height
 +
           The height of the video window, in pixels.
 +
       --projectm-meshx=<integer> Mesh width
 +
           The width of the mesh, in pixels.
 +
       --projectm-meshy=<integer> Mesh height
 +
           The height of the mesh, in pixels.
 +
       --projectm-texture-size=<integer>
 +
                                 Texture size
 +
           The size of the texture, in pixels.
  
−
       --sout-x264-cabac, --no-sout-x264-cabac
+
Goom effect (goom)
−
                                CABAC (default enabled)
+
       --goom-width=<integer>    Goom display width
−
           CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows
+
          This allows you to set the resolution of the Goom display (bigger
−
           down encoding and decoding, but should save 10 to 15% bitrate.
+
           resolution will be prettier but more CPU intensive).
−
           (default enabled)
+
      --goom-height=<integer>    Goom display height
−
       --sout-x264-ref=<integer [1 .. 16]>
+
           This allows you to set the resolution of the Goom display (bigger
−
                                 Number of reference frames
+
           resolution will be prettier but more CPU intensive).
−
           Number of previous frames used as predictors. This is effective in
+
       --goom-speed=<integer [1 .. 10]>  
−
           Anime, but seems to make little difference in live-action source
+
                                 Goom animation speed
−
          material. Some decoders are unable to deal with large frameref
+
           This allows you to set the animation speed (between 1 and 10,
−
          values. Range 1 to 16.
+
           defaults to 6).
−
       --sout-x264-nf, --no-sout-x264-nf
+
 
−
                                 Skip loop filter (default disabled)
+
3D OpenGL spectrum visualization (glspectrum)
−
           Deactivate the deblocking loop filter (decreases quality). (default
+
       --glspectrum-width=<integer>
−
          disabled)
+
                                Video width
−
       --sout-x264-deblock=<string>
+
          The width of the visualization window, in pixels.
−
                                 Loop filter AlphaC0 and Beta parameters
+
      --glspectrum-height=<integer>
−
                                alpha:beta
+
                                 Video height
−
           Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha
+
           The height of the visualization window, in pixels.
−
          and beta parameters. -6 means light filter, 6 means strong.
+
 
−
       --sout-x264-psy-rd=<string>
+
Wall video filter (wall)
−
                                Strength of psychovisual optimization,
+
       --wall-cols=<integer [1 .. 15]>  
−
                                default is "1.0:0.0"
+
                                 Number of columns
−
          First parameter controls if RD is on (subme>=6) or offsecond
+
           Number of horizontal windows in which to split the video.
−
          parameter controls if Trellis is used on psychovisual
+
       --wall-rows=<integer [1 .. 15]>  
−
           optimization,default off
+
                                Number of rows
−
       --sout-x264-psy, --no-sout-x264-psy
+
           Number of vertical windows in which to split the video.
−
                                Use Psy-optimizations (default enabled)
+
       --wall-active=<string>    Active windows
−
          Use all visual optimizations that can worsen both PSNR and SSIM
+
          Comma-separated list of active windows, defaults to all
−
          (default enabled)
+
       --wall-element-aspect=<string>  
−
       --sout-x264-level=<string> H.264 level
+
                                Element aspect ratio
−
           Specify H.264 level (as defined by Annex A of the standard). Levels
+
           Aspect ratio of the individual displays building the wall.
−
          are not enforced; it's up to the user to select a level compatible
+
 
−
          with the rest of the encoding options. Range 1 to 5.1 (10 to 51 is
+
Panoramix: wall with overlap video filter (panoramix)
−
          also allowed).
+
Split the video in multiple windows to display on a wall of screens
−
       --sout-x264-profile={baseline,main,high}
+
       --panoramix-cols=<integer [-1 .. 15]>
−
                                 H.264 profile
+
                                 Number of columns
−
           Specify H.264 profile which limits are enforced overother settings
+
           Select the number of horizontal video windows in which to split the
−
      --sout-x264-interlaced, --no-sout-x264-interlaced
+
           video
−
                                Interlaced mode (default disabled)
+
       --panoramix-rows=<integer [-1 .. 15]>  
−
           Pure-interlaced mode. (default disabled)
+
                                 Number of rows
−
       --sout-x264-slices=<integer>
+
          Select the number of vertical video windows in which to split the
−
                                 Force number of slices per frame
+
           video
−
           Force rectangular slices and is overridden by other slicing optinos
+
       --panoramix-bz-length=<integer [0 .. 100]>  
−
       --sout-x264-slice-max-size=<integer>
+
                                 length of the overlapping area (in %)
−
                                 Limit the size of each slice in bytes
+
           Select in percent the length of the blended zone
−
           Sets a maximum slice size in bytes, Includes NAL overhead in size
+
       --panoramix-bz-height=<integer [0 .. 100]>  
−
       --sout-x264-slice-max-mbs=<integer>
+
                                 height of the overlapping area (in %)
−
                                 Limit the size of each slice in macroblocks
+
           Select in percent the height of the blended zone (case of 2x2 wall)
−
           Sets a maximum number of macroblocks per slice
+
       --panoramix-attenuate, --no-panoramix-attenuate
−
       --sout-x264-hrd={none,vbr,cbr}
+
                                Attenuation
−
                                 HRD-timing information
+
                                 (default enabled)
−
           HRD-timing information
+
          Check this option if you want attenuate blended zone by this plug-in
−
       --sout-x264-qp=<integer [-1 .. 51]>
+
           (if option is unchecked, attenuate is made by opengl)
−
                                 Set QP
+
       --panoramix-bz-begin=<integer [0 .. 100]>  
−
           This selects the quantizer to use. Lower values result in better
+
                                 Attenuation, begin (in %)
−
          fidelity, but higher bitrates. 26 is a good default value. Range 0
+
           Select in percent the Lagrange coefficient of the beginning blended
−
           (lossless) to 51.
+
           zone
−
       --sout-x264-crf=<integer [0 .. 51]>
+
       --panoramix-bz-middle=<integer [0 .. 100]>  
−
                                 Quality-based VBR
+
                                 Attenuation, middle (in %)
−
           1-pass Quality-based VBR. Range 0 to 51.
+
          Select in percent the Lagrange coefficient of the middle of blended
−
       --sout-x264-qpmin=<integer [0 .. 51]>
+
           zone
−
                                 Min QP
+
       --panoramix-bz-end=<integer [0 .. 100]>  
−
           Minimum quantizer parameter. 15 to 35 seems to be a useful range.
+
                                 Attenuation, end (in %)
−
       --sout-x264-qpmax=<integer [0 .. 51]>
+
           Select in percent the Lagrange coefficient of the end of blended zone
−
                                 Max QP
+
       --panoramix-bz-middle-pos=<integer [1 .. 99]>  
−
           Maximum quantizer parameter.
+
                                 middle position (in %)
−
       --sout-x264-qpstep=<integer [0 .. 51]>
+
           Select in percent (50 is center) the position of the middle point
−
                                 Max QP step
+
          (Lagrange) of blended zone
−
           Max QP step between frames.
+
       --panoramix-bz-gamma-red=<float [0.000000 .. 5.000000]>  
−
       --sout-x264-ratetol=<float [0.000000 .. 100.000000]>
+
                                 Gamma (Red) correction
−
                                 Average bitrate tolerance
+
          Select the gamma for the correction of blended zone (Red or Y
−
           Allowed variance in average bitrate (in kbits/s).
+
           component)
−
       --sout-x264-vbv-maxrate=<integer>
+
       --panoramix-bz-gamma-green=<float [0.000000 .. 5.000000]>  
−
                                 Max local bitrate
+
                                 Gamma (Green) correction
−
           Sets a maximum local bitrate (in kbits/s).
+
           Select the gamma for the correction of blended zone (Green or U
−
       --sout-x264-vbv-bufsize=<integer>
+
          component)
−
                                 VBV buffer
+
       --panoramix-bz-gamma-blue=<float [0.000000 .. 5.000000]>  
−
           Averaging period for the maximum local bitrate (in kbits).
+
                                 Gamma (Blue) correction
−
       --sout-x264-vbv-init=<float [0.000000 .. 1.000000]>
+
           Select the gamma for the correction of blended zone (Blue or V
−
                                 Initial VBV buffer occupancy
+
          component)
−
           Sets the initial buffer occupancy as a fraction of the buffer size.
+
       --panoramix-bz-blackcrush-red=<integer [0 .. 255]>  
−
          Range 0.0 to 1.0.
+
                                 Black Crush for Red
−
       --sout-x264-ipratio=<float [1.000000 .. 2.000000]>
+
           Select the Black Crush of blended zone (Red or Y component)
−
                                 QP factor between I and P
+
       --panoramix-bz-blackcrush-green=<integer [0 .. 255]>  
−
           QP factor between I and P. Range 1.0 to 2.0.
+
                                 Black Crush for Green
−
       --sout-x264-pbratio=<float [1.000000 .. 2.000000]>
+
           Select the Black Crush of blended zone (Green or U component)
−
                                 QP factor between P and B
+
       --panoramix-bz-blackcrush-blue=<integer [0 .. 255]>  
−
           QP factor between P and B. Range 1.0 to 2.0.
+
                                 Black Crush for Blue
−
       --sout-x264-chroma-qp-offset=<integer>
+
           Select the Black Crush of blended zone (Blue or V component)
−
                                 QP difference between chroma and luma
+
       --panoramix-bz-whitecrush-red=<integer [0 .. 255]>  
−
           QP difference between chroma and luma.
+
                                 White Crush for Red
−
       --sout-x264-pass=<integer [0 .. 3]>
+
           Select the White Crush of blended zone (Red or Y component)
−
                                 Multipass ratecontrol
+
       --panoramix-bz-whitecrush-green=<integer [0 .. 255]>  
−
           Multipass ratecontrol:
+
                                 White Crush for Green
−
- 1: First pass, creates stats file
+
           Select the White Crush of blended zone (Green or U component)
−
- 2:
+
       --panoramix-bz-whitecrush-blue=<integer [0 .. 255]>  
−
          Last pass, does not overwrite stats file
+
                                 White Crush for Blue
−
- 3: Nth pass, overwrites
+
           Select the White Crush of blended zone (Blue or V component)
−
           stats file
+
      --panoramix-bz-blacklevel-red=<integer [0 .. 255]>
−
 
+
                                Black Level for Red
−
       --sout-x264-qcomp=<float [0.000000 .. 1.000000]>
+
           Select the Black Level of blended zone (Red or Y component)
−
                                 QP curve compression
+
       --panoramix-bz-blacklevel-green=<integer [0 .. 255]>  
−
           QP curve compression. Range 0.0 (CBR) to 1.0 (QCP).
+
                                 Black Level for Green
−
       --sout-x264-cplxblur=<float>
+
           Select the Black Level of blended zone (Green or U component)
−
                                 Reduce fluctuations in QP
+
       --panoramix-bz-blacklevel-blue=<integer [0 .. 255]>  
−
           This reduces the fluctuations in QP before curve compression.
+
                                 Black Level for Blue
−
          Temporally blurs complexity.
+
           Select the Black Level of blended zone (Blue or V component)
−
       --sout-x264-qblur=<float> Reduce fluctuations in QP
+
       --panoramix-bz-whitelevel-red=<integer [0 .. 255]>  
−
           This reduces the fluctations in QP after curve compression.
+
                                White Level for Red
−
          Temporally blurs quants.
+
           Select the White Level of blended zone (Red or Y component)
−
       --sout-x264-aq-mode=<integer [0 .. 2]>
+
       --panoramix-bz-whitelevel-green=<integer [0 .. 255]>  
−
                                 How AQ distributes bits
+
                                 White Level for Green
−
          Defines bitdistribution mode for AQ, default 1
+
           Select the White Level of blended zone (Green or U component)
−
- 0: Disabled
+
       --panoramix-bz-whitelevel-blue=<integer [0 .. 255]>
−
- 1:
+
                                White Level for Blue
−
           Current x264 default mode
+
           Select the White Level of blended zone (Blue or V component)
−
- 2: uses log(var)^2 instead of log(var)
+
       --panoramix-active=<string>
−
          and attempts to adapt strength per frame
+
                                 Active windows
−
       --sout-x264-aq-strength=<float>
+
           Comma-separated list of active windows, defaults to all
−
                                Strength of AQ
 
−
          Strength to reduce blocking and blurring in flat
 
−
and textured areas,
 
−
          default 1.0 recommented to be between 0..2
 
−
- 0.5: weak AQ
 
−
- 1.5:
 
−
           strong AQ
 
−
       --sout-x264-partitions={none,fast,normal,slow,all}
 
−
                                 Partitions to consider
 
−
           Partitions to consider in analyse mode:
 
−
- none  :
 
−
- fast  : i4x4
 
  
−
          - normal: i4x4,p8x8,(i8x8)
+
  Clone video filter (clone)
−
- slow : i4x4,p8x8,(i8x8),b8x8
+
  Duplicate your video to multiple windows and/or video output modules
−
  - all 
+
       --clone-count=<integer>    Number of clones
−
          : i4x4,p8x8,(i8x8),b8x8,p4x4
+
           Number of video windows in which to clone the video.
−
(p4x4 requires p8x8. i8x8 requires
+
       --clone-vout-list=<string> Video output modules
−
          8x8dct).
+
          You can use specific video output modules for the clones. Use a
−
       --sout-x264-direct={none,spatial,temporal,auto}
+
           comma-separated list of modules.
−
                                Direct MV prediction mode
 
−
           Direct MV prediction mode.
 
−
       --sout-x264-direct-8x8=<integer [-1 .. 1]>
 
−
                                Direct prediction size
 
−
           Direct prediction size:  - 0: 4x4
 
−
-  1: 8x8
 
−
- -1: smallest
 
−
          possible according to level
 
  
−
       --sout-x264-weightb, --no-sout-x264-weightb
+
YUV video output (yuv)
−
                                Weighted prediction for B-frames (default
+
       --yuv-file=<string>        device, fifo or filename
−
                                enabled)
+
           device, fifo or filename to write yuv frames too.
−
           Weighted prediction for B-frames. (default enabled)
+
       --yuv-chroma=<string>     Chroma used
−
       --sout-x264-weightp=<integer [0 .. 2]>
+
          Force use of a specific chroma for output.
−
                                Weighted prediction for P-frames
+
      --yuv-yuv4mpeg2, --no-yuv-yuv4mpeg2
−
          Weighted prediction for P-frames:  - 0: Disabled
+
                                Add a YUV4MPEG2 header
−
- 1: Blind offset
+
                                (default disabled)
 +
          The YUV4MPEG2 header is compatible with mplayer yuv video output and
 +
          requires YV12/I420 fourcc.
  
−
           - 2: Smart analysis
+
WGL extension for OpenGL (wgl)
 +
      --gpu-affinity=<integer>  GPU affinity
 +
           GPU affinity
  
−
       --sout-x264-me={dia,hex,umh,esa,tesa}
+
Video memory output (vmem)
−
                                 Integer pixel motion estimation method
+
      --vmem-width=<integer>    Width
−
           Selects the motion estimation algorithm: - dia: diamond search,
+
          Video memory buffer width.
−
           radius 1 (fast)
+
      --vmem-height=<integer>    Height
−
- hex: hexagonal search, radius 2
+
          Video memory buffer height.
−
- umh: uneven
+
       --vmem-pitch=<integer>    Pitch
−
           multi-hexagon search (better but slower)
+
          Video memory buffer pitch in bytes.
−
  - esa: exhaustive search
+
      --vmem-chroma=<string>    Chroma
−
           (extremely slow, primarily for testing)
+
          Output chroma for the memory image as a 4-character string, eg.
−
- tesa: hadamard exhaustive
+
          "RV32".
−
           search (extremely slow, primarily for testing)
+
 
 +
Dummy video output (vdummy)
 +
      --dummy-chroma=<string>    Dummy image chroma format
 +
          Force the dummy video output to create images using a specific chroma
 +
          format instead of trying to improve performances by using the most
 +
          efficient one.
 +
 
 +
OpenGL video output (gl)
 +
      --gl={any,wgl,none}        OpenGL extension
 +
          Extension through which to use the Open Graphics Library (OpenGL).
 +
      --glconv={any,direct3d9,none}  
 +
                                 Open GL/GLES hardware converter
 +
           Force a "glconv" module.
 +
  Colorspace conversion:
 +
      --rendering-intent={0 (Perceptual), 1 (Relative colorimetric), 2 (Absolute colorimetric), 3 (Saturation)}
 +
                                Rendering intent for color conversion
 +
           The algorithm used to convert between color spaces
 +
      --target-prim={0 (Unknown primaries), 1 (ITU-R Rec. BT.601 (525-line = NTSC, SMPTE-C)), 2 (ITU-R Rec. BT.601 (625-line = PAL, SECAM)), 3 (ITU-R Rec. BT.709 (HD), also sRGB), 4 (ITU-R Rec. BT.470 M), 5 (ITU-R Rec. BT.2020 (UltraHD)), 6 (Apple RGB), 7 (Adobe RGB (1998)), 8 (ProPhoto RGB (ROMM)), 9 (CIE 1931 RGB primaries), 10 (DCI-P3 (Digital Cinema)), 11 (Panasonic V-Gamut (VARICAM)), 12 (Sony S-Gamut)}
 +
                                Display primaries
 +
          The primaries associated with the output display
 +
      --target-trc={0 (Unknown gamma), 1 (ITU-R Rec. BT.1886 (CRT emulation + OOTF)), 2 (IEC 61966-2-4 sRGB (CRT emulation)), 3 (Linear light content), 4 (Pure power gamma 1.8), 5 (Pure power gamma 2.2), 6 (Pure power gamma 2.8), 7 (ProPhoto RGB (ROMM)), 8 (ITU-R BT.2100 PQ (perceptual quantizer), aka SMPTE ST2048), 9 (ITU-R BT.2100 HLG (hybrid log-gamma), aka ARIB STD-B67), 10 (Panasonic V-Log (VARICAM)), 11 (Sony S-Log1), 12 (Sony S-Log2)}
 +
                                Display gamma / transfer function
 +
          The gamma/transfer function associated with the output display
 +
  Tone mapping:
 +
      --tone-mapping={3 (Hable (filmic mapping, recommended)), 1 (Mobius (linear + knee)), 2 (Reinhard (simple non-linear)), 4 (Gamma-Power law), 5 (Linear stretch (peak to peak)), 0 (Hard clip out-of-gamut)}
 +
                                Tone-mapping algorithm
 +
          Algorithm to use when converting from wide gamut to standard gamut,
 +
          or from HDR to SDR
 +
      --tone-mapping-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Tone-mapping parameter
 +
          This parameter can be used to tune the tone-mapping curve. Specifics
 +
          depend on the curve used.
 +
      --tone-mapping-desat=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Tone-mapping desaturation coefficient
 +
          How strongly to desaturate overbright colors towards white. 0.0
 +
          disables this behavior.
 +
      --tone-mapping-warn, --no-tone-mapping-warn
 +
                                Highlight clipped pixels
 +
                                (default disabled)
 +
          Debugging tool to indicate which pixels were clipped as part of the
 +
          tone mapping process.
 +
  Dithering:
 +
      --dither-algo={-1 (Disabled), 0 (Blue noise), 3 (White noise), 1 (Bayer matrix (ordered dither))}
 +
                                Dithering algorithm
 +
          The algorithm to use when dithering to a lower bit depth (degrades
 +
           performance on some platforms).
 +
      --dither-depth=<integer [0 .. 16]>
 +
                                Dither depth override (0 = framebuffer depth)
 +
          Overrides the detected framebuffer depth. Useful to dither to lower
 +
          bit depths than otherwise required.
 +
 
 +
  OpenGL video output for Windows (glwin32)
 +
      --glconv={any,direct3d9,none}
 +
                                Open GL/GLES hardware converter
 +
          Force a "glconv" module.
 +
  Colorspace conversion:
 +
      --rendering-intent={0 (Perceptual), 1 (Relative colorimetric), 2 (Absolute colorimetric), 3 (Saturation)}
 +
                                Rendering intent for color conversion
 +
           The algorithm used to convert between color spaces
 +
      --target-prim={0 (Unknown primaries), 1 (ITU-R Rec. BT.601 (525-line = NTSC, SMPTE-C)), 2 (ITU-R Rec. BT.601 (625-line = PAL, SECAM)), 3 (ITU-R Rec. BT.709 (HD), also sRGB), 4 (ITU-R Rec. BT.470 M), 5 (ITU-R Rec. BT.2020 (UltraHD)), 6 (Apple RGB), 7 (Adobe RGB (1998)), 8 (ProPhoto RGB (ROMM)), 9 (CIE 1931 RGB primaries), 10 (DCI-P3 (Digital Cinema)), 11 (Panasonic V-Gamut (VARICAM)), 12 (Sony S-Gamut)}
 +
                                Display primaries
 +
          The primaries associated with the output display
 +
      --target-trc={0 (Unknown gamma), 1 (ITU-R Rec. BT.1886 (CRT emulation + OOTF)), 2 (IEC 61966-2-4 sRGB (CRT emulation)), 3 (Linear light content), 4 (Pure power gamma 1.8), 5 (Pure power gamma 2.2), 6 (Pure power gamma 2.8), 7 (ProPhoto RGB (ROMM)), 8 (ITU-R BT.2100 PQ (perceptual quantizer), aka SMPTE ST2048), 9 (ITU-R BT.2100 HLG (hybrid log-gamma), aka ARIB STD-B67), 10 (Panasonic V-Log (VARICAM)), 11 (Sony S-Log1), 12 (Sony S-Log2)}
 +
                                Display gamma / transfer function
 +
          The gamma/transfer function associated with the output display
 +
  Tone mapping:
 +
      --tone-mapping={3 (Hable (filmic mapping, recommended)), 1 (Mobius (linear + knee)), 2 (Reinhard (simple non-linear)), 4 (Gamma-Power law), 5 (Linear stretch (peak to peak)), 0 (Hard clip out-of-gamut)}
 +
                                Tone-mapping algorithm
 +
          Algorithm to use when converting from wide gamut to standard gamut,
 +
          or from HDR to SDR
 +
      --tone-mapping-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Tone-mapping parameter
 +
           This parameter can be used to tune the tone-mapping curve. Specifics
 +
          depend on the curve used.
 +
      --tone-mapping-desat=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Tone-mapping desaturation coefficient
 +
          How strongly to desaturate overbright colors towards white. 0.0
 +
          disables this behavior.
 +
      --tone-mapping-warn, --no-tone-mapping-warn
 +
                                Highlight clipped pixels
 +
                                (default disabled)
 +
          Debugging tool to indicate which pixels were clipped as part of the
 +
          tone mapping process.
 +
  Dithering:
 +
      --dither-algo={-1 (Disabled), 0 (Blue noise), 3 (White noise), 1 (Bayer matrix (ordered dither))}
 +
                                Dithering algorithm
 +
          The algorithm to use when dithering to a lower bit depth (degrades
 +
          performance on some platforms).
 +
      --dither-depth=<integer [0 .. 16]>
 +
                                Dither depth override (0 = framebuffer depth)
 +
          Overrides the detected framebuffer depth. Useful to dither to lower
 +
          bit depths than otherwise required.
 +
 
 +
Flaschen-Taschen video output (flaschen)
 +
      --flaschen-display=<string>
 +
                                Flaschen-Taschen display address
 +
          IP address or hostname of the Flaschen-Taschen display. Something
 +
          like ft.noise or ftkleine.noise
 +
      --flaschen-width=<integer> Width
 +
          Video width
 +
      --flaschen-height=<integer>
 +
                                Height
 +
          Video height
  
−
       --sout-x264-merange=<integer [1 .. 64]>
+
Embedded window video (drawable)
−
                                Maximum motion vector search range
+
       --drawable-hwnd=<integer> Window handle (HWND)
−
           Maximum distance to search for motion estimation, measured from
+
           Video will be embedded in this pre-existing window. If zero, a new
−
           predicted position(s). Default of 16 is good for most footage, high
+
           window will be created.
−
          motion sequences may benefit from settings between 24 and 32. Range 0
+
 
−
          to 64.
+
DirectX (DirectDraw) video output (directdraw)
−
       --sout-x264-mvrange=<integer>
+
Recommended video output for Windows XP. Incompatible with Vista's Aero interface
−
                                Maximum motion vector length
+
       --directx-hw-yuv, --no-directx-hw-yuv
−
          Maximum motion vector length in pixels. -1 is automatic, based on
+
                                 Use hardware YUV->RGB conversions
−
          level.
+
                                 (default enabled)
−
      --sout-x264-mvrange-thread=<integer>
+
           Try to use hardware acceleration for YUV->RGB conversions. This
−
                                 Minimum buffer space between threads
+
           option doesn't have any effect when using overlays.
−
          Minimum buffer space between threads. -1 is automatic, based on
+
       --directx-overlay, --no-directx-overlay
−
          number of threads.
+
                                 Overlay video output
−
      --sout-x264-subme=<integer>
 
−
                                 Subpixel motion estimation and partition
 
−
                                decision quality
 
−
           This parameter controls quality versus speed tradeoffs involved in
 
−
           the motion estimation decision process (lower = quicker and higher =
 
−
          better quality). Range 1 to 9.
 
−
       --sout-x264-mixed-refs, --no-sout-x264-mixed-refs
 
−
                                 Decide references on a per partition basis
 
 
                                 (default enabled)
 
                                 (default enabled)
−
           Allows each 8x8 or 16x8 partition to independently select a reference
+
           Overlay is the hardware acceleration capability of your video card
−
           frame, as opposed to only one ref per macroblock. (default enabled)
+
           (ability to render video directly). VLC will try to use it by
−
      --sout-x264-chroma-me, --no-sout-x264-chroma-me
+
           default.
−
                                Chroma in motion estimation (default enabled)
+
       --directx-use-sysmem, --no-directx-use-sysmem
−
          Chroma ME for subpel and mode decision in P-frames. (default enabled)
+
                                 Use video buffers in system memory
−
      --sout-x264-8x8dct, --no-sout-x264-8x8dct
 
−
                                Adaptive spatial transform size (default
 
−
                                enabled)
 
−
           SATD-based decision for 8x8 transform in inter-MBs. (default enabled)
 
−
      --sout-x264-trellis=<integer [0 .. 2]>
 
−
                                Trellis RD quantization
 
−
          Trellis RD quantization:
 
−
- 0: disabled
 
−
- 1: enabled only on the
 
−
          final encode of a MB
 
−
- 2: enabled on all mode decisions
 
−
This
 
−
          requires CABAC.
 
−
       --sout-x264-lookahead=<integer [0 .. 60]>
 
−
                                Framecount to use on frametype lookahead
 
−
          Framecount to use on frametype lookahead. Currently default is lower
 
−
          than x264 default because unmuxable outputdoesn't handle larger
 
−
          values that well yet
 
−
      --sout-x264-intra-refresh, --no-sout-x264-intra-refresh
 
−
                                 Use Periodic Intra Refresh (default disabled)
 
−
          Use Periodic Intra Refresh instead of IDR frames (default disabled)
 
−
      --sout-x264-mbtree, --no-sout-x264-mbtree
 
−
                                Use mb-tree ratecontrol (default enabled)
 
−
          You can disable use of Macroblock-tree on ratecontrol (default
 
−
          enabled)
 
−
      --sout-x264-fast-pskip, --no-sout-x264-fast-pskip
 
−
                                Early SKIP detection on P-frames (default
 
−
                                enabled)
 
−
          Early SKIP detection on P-frames. (default enabled)
 
−
      --sout-x264-dct-decimate, --no-sout-x264-dct-decimate
 
−
                                Coefficient thresholding on P-frames (default
 
−
                                enabled)
 
−
          Coefficient thresholding on P-frames.Eliminate dct blocks containing
 
−
          only a small single coefficient. (default enabled)
 
−
      --sout-x264-nr=<integer [0 .. 1000]>
 
−
                                Noise reduction
 
−
          Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000
 
−
          seems to be a useful range.
 
−
      --sout-x264-deadzone-inter=<integer [0 .. 32]>
 
−
                                Inter luma quantization deadzone
 
−
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
 
−
      --sout-x264-deadzone-intra=<integer [0 .. 32]>
 
−
                                Intra luma quantization deadzone
 
−
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
 
−
      --sout-x264-non-deterministic, --no-sout-x264-non-deterministic
 
−
                                Non-deterministic optimizations when threaded
 
 
                                 (default disabled)
 
                                 (default disabled)
−
           Slightly improve quality of SMP, at the cost of repeatability.
+
           Create video buffers in system memory instead of video memory. This
−
           (default disabled)
+
          isn't recommended as usually using video memory allows benefiting
−
      --sout-x264-asm, --no-sout-x264-asm
+
           from more hardware acceleration (like rescaling or YUV->RGB
−
                                CPU optimizations (default enabled)
+
          conversions). This option doesn't have any effect when using
−
           Use assembler CPU optimizations. (default enabled)
+
           overlays.
−
       --sout-x264-psnr, --no-sout-x264-psnr
+
       --directx-3buffering, --no-directx-3buffering
−
                                 PSNR computation (default disabled)
+
                                Use triple buffering for overlays
−
           Compute and print PSNR stats. This has no effect on the actual
+
                                 (default enabled)
−
           encoding quality. (default disabled)
+
           Try to use triple buffering when using YUV overlays. That results in
−
       --sout-x264-ssim, --no-sout-x264-ssim
+
           much better video quality (no flickering).
−
                                 SSIM computation (default disabled)
+
       --directx-device={,display,\\.\DISPLAY1}
−
           Compute and print SSIM stats. This has no effect on the actual
+
                                 Name of desired display device
−
           encoding quality. (default disabled)
+
           In a multiple monitor configuration, you can specify the Windows
−
      --sout-x264-quiet, --no-sout-x264-quiet
+
           device name of the display that you want the video window to open on.
−
                                Quiet mode (default disabled)
+
          For example, "\\.\DISPLAY1" or "\\.\DISPLAY2".
−
          Quiet mode. (default disabled)
+
 
−
      --sout-x264-sps-id=<integer>
+
Direct3D9 video output (direct3d9)
−
                                SPS and PPS id numbers
+
Recommended video output for Windows Vista and later versions
−
          Set SPS and PPS id numbers to allow concatenating streams with
+
       --direct3d9-hw-blending, --no-direct3d9-hw-blending
−
          different settings.
+
                                Use hardware blending support
−
       --sout-x264-aud, --no-sout-x264-aud
+
                                 (default enabled)
−
                                 Access unit delimiters (default disabled)
+
           Try to use hardware acceleration for subtitle/OSD blending.
−
           Generate access unit delimiter NAL units. (default disabled)
+
       --direct3d9-shader={Disabled,Invert,Grayscale,Convert601to709,GammaCorrection18,GammaCorrection22,GammaCorrectionBT709,WidenColorSpace,HLSL File}
−
       --sout-x264-verbose, --no-sout-x264-verbose
+
                                 Pixel Shader
−
                                 Statistics (default disabled)
+
           Choose a pixel shader to apply.
−
           Print stats for each frame. (default disabled)
+
       --direct3d9-shader-file=<string>  
−
       --sout-x264-stats=<string> Filename for 2 pass stats file
+
                                Path to HLSL file
−
           Filename for 2 pass stats file for multi-pass encoding.
+
           Path to an HLSL file containing a single pixel shader.
−
       --sout-x264-preset={ultrafast,superfast,veryfast,faster,fast,medium,slow,slower,veryslow,placebo}
+
 
−
                                Use preset as default settings. Overridden by
+
Direct3D11 video output (direct3d11)
−
                                user settings.
+
Recommended video output for Windows 8 and later versions
−
          Use preset as default settings. Overridden by user settings.
+
       --direct3d11-hw-blending, --no-direct3d11-hw-blending
−
      --sout-x264-tune={film,animation,grain,stillimage,psnr,ssim,fastdecode,zerolatency}
+
                                 Use hardware blending support
−
                                 Tune the settings for a particular type of
+
                                 (default enabled)
−
                                 source or situation. Overridden by user
+
           Try to use hardware acceleration for subtitle/OSD blending.
−
                                settings.
 
−
           Tune the settings for a particular type of source or situation.
 
−
          Overridden by user settings.
 
  
−
  Win32 waveOut extension output
+
  Video transformation filter (transform)
−
      --waveout-float32, --no-waveout-float32
+
Rotate or flip the video
−
                                Use float32 output (default enabled)
+
       --transform-type={90,180,270,hflip,vflip,transpose,antitranspose}  
−
          The option allows you to enable or disable the high-quality float32
+
                                 Transform type
−
          audio output mode (which is not well supported by some soundcards).
+
           Transform type
−
          (default enabled)
 
−
       --waveout-audio-device={wavemapper}
 
−
                                 Select Audio Device
 
−
          Select special Audio device, or let windows decide (default), change
 
−
           needs VLC restart to apply.
 
  
−
  Wall video filter
+
  Sharpen video filter (sharpen)
−
      --wall-cols=<integer>      Number of columns
+
Augment contrast between contours.
−
          Number of horizontal windows in which to split the video.
+
       --sharpen-sigma=<float [0.000000 .. 2.000000]>  
−
       --wall-rows=<integer>     Number of rows
+
                                Sharpen strength (0-2)
−
          Number of vertical windows in which to split the video.
+
           Set the Sharpen strength, between 0 and 2. Defaults to 0.05.
−
      --wall-active=<string>    Active windows
 
−
           Comma-separated list of active windows, defaults to all
 
−
      --wall-element-aspect=<string>
 
−
                                Element aspect ratio
 
−
          Aspect ratio of the individual displays building the wall.
 
  
−
  Simple DirectMedia Layer video output
+
  Sepia video filter (sepia)
−
       --sdl-chroma=<string>     SDL chroma format
+
Gives video a warmer tone by applying sepia effect
−
           Force the SDL renderer to use a specific chroma format instead of
+
       --sepia-intensity=<integer [0 .. 255]>  
−
          trying to improve performances by using the most efficient one.
+
                                Sepia intensity
 +
           Intensity of sepia effect
  
−
  Vorbis audio decoder
+
  Scene video filter (scene)
−
       --sout-vorbis-quality=<integer [0 .. 10]>
+
Send your video to picture files
−
                                Encoding quality
+
       --scene-format=<string>    Image format
−
           Enforce a quality between 1 (low) and 10 (high), instead of
+
          Format of the output images (png, jpeg, ...).
−
           specifying a particular bitrate. This will produce a VBR stream.
+
      --scene-width=<integer>    Image width
−
       --sout-vorbis-max-bitrate=<integer>
+
          You can enforce the image width. By default (-1) VLC will adapt to
−
                                 Maximum encoding bitrate
+
          the video characteristics.
−
           Maximum bitrate in kbps. This is useful for streaming applications.
+
      --scene-height=<integer>   Image height
−
       --sout-vorbis-min-bitrate=<integer>
+
           You can enforce the image height. By default (-1) VLC will adapt to
−
                                 Minimum encoding bitrate
+
          the video characteristics.
−
           Minimum bitrate in kbps. This is useful for encoding for a fixed-size
+
      --scene-prefix=<string>    Filename prefix
−
           channel.
+
          Prefix of the output images filenames. Output filenames will have the
−
       --sout-vorbis-cbr, --no-sout-vorbis-cbr
+
           "prefixNUMBER.format" form if replace is not true.
−
                                 CBR encoding (default disabled)
+
      --scene-path=<string>      Directory path prefix
−
           Force a constant bitrate encoding (CBR). (default disabled)
+
          Directory path where images files should be saved. If not set, then
 +
          images will be automatically saved in users homedir.
 +
       --scene-replace, --no-scene-replace
 +
                                Always write to the same file
 +
                                 (default disabled)
 +
           Always write to the same file instead of creating one file per image.
 +
          In this case, the number is not appended to the filename.
 +
       --scene-ratio=<integer [1 .. 2147483647]>  
 +
                                 Recording ratio
 +
           Ratio of images to record. 3 means that one image out of three is
 +
          recorded.
 +
 
 +
Rotate video filter (rotate)
 +
      --rotate-angle=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Angle in degrees
 +
           Angle in degrees (0 to 359)
 +
       --rotate-use-motion, --no-rotate-use-motion
 +
                                Use motion sensors
 +
                                 (default disabled)
 +
           Use HDAPS, AMS, APPLESMC or UNIMOTION motion sensors to rotate the
 +
          video
  
−
  RTSP VoD server
+
  Puzzle interactive game video filter (puzzle)
−
       --rtsp-host=<string>       RTSP host address
+
       --puzzle-rows=<integer [2 .. 42]>  
−
           This defines the address, port and path the RTSP VOD server will
+
                                Number of puzzle rows
−
          listen on.
+
           Number of puzzle rows
−
Syntax is address:port/path. The default is to listen on
+
      --puzzle-cols=<integer [2 .. 42]>
−
           all interfaces (address 0.0.0.0), on port 554, with no path.
+
                                Number of puzzle columns
−
To
+
           Number of puzzle columns
−
           listen only on the local interface, use "localhost" as address.
+
      --puzzle-border=<integer [0 .. 40]>
−
       --rtsp-raw-mux=<string>   MUX for RAW RTSP transport
+
                                Border
−
           MUX for RAW RTSP transport
+
          Unshuffled Border width.
−
       --rtsp-throttle-users=<integer>
+
      --puzzle-preview, --no-puzzle-preview
−
                                 Maximum number of connections
+
                                Small preview
−
           This limits the maximum number of clients that can connect to the
+
                                (default disabled)
−
          RTSP VOD. 0 means no limit.
+
           Show small preview.
−
       --rtsp-session-timeout=<integer>
+
       --puzzle-preview-size=<integer [0 .. 100]>  
−
                                 Sets the timeout option in the RTSP session
+
                                Small preview size
−
                                 string
+
           Show small preview size (percent of source).
−
           Defines what timeout option to add to the RTSP session ID string.
+
       --puzzle-shape-size=<integer [0 .. 100]>  
−
           Setting it to a negative number removes the timeout option entirely.
+
                                 Piece edge shape size
−
           This is needed by some IPTV STBs (such as those made by HansunTech)
+
           Size of the curve along the piece's edge
−
           which get confused by it. The default is 5.
+
      --puzzle-auto-shuffle=<integer [0 .. 30000]>
 +
                                Auto shuffle
 +
          Auto shuffle delay during game
 +
       --puzzle-auto-solve=<integer [0 .. 30000]>  
 +
                                 Auto solve
 +
          Auto solve delay during game
 +
      --puzzle-rotation={0 (0), 1 (0/180), 2 (0/90/180/270), 3 (0/90/180/270/mirror)}
 +
                                Rotation
 +
          Rotation parameter: none;180;90-270;mirror
 +
      --puzzle-mode={0 (jigsaw puzzle), 1 (sliding puzzle), 2 (swap puzzle), 3 (exchange puzzle)}
 +
                                 Game mode
 +
           Select game mode variation from jigsaw puzzle to sliding puzzle.
 +
 
 +
Video post processing filter (postproc)
 +
      --postproc-q=<integer [0 .. 6]>
 +
                                Post processing quality
 +
           Quality of post processing. Valid range is 0 (disabled) to 6
 +
           (highest) Higher levels require more CPU power, but produce higher
 +
           quality pictures. With default filter chain, the values map to the
 +
          following filters: 1: hb, 2-4: hb+vb, 5-6: hb+vb+dr
 +
      --postproc-name=<string>  FFmpeg post processing filter chains
 +
          FFmpeg post processing filter chains
 +
 
 +
Posterize video filter (posterize)
 +
Posterize video by lowering the number of colors
 +
      --posterize-level=<integer [2 .. 256]>
 +
                                Posterize level
 +
          Posterize level (number of colors is cube of this value)
  
−
  Video memory output
+
  Motion blur filter (motionblur)
−
       --vmem-width=<integer>    Width
+
       --blur-factor=<integer [1 .. 127]>  
−
          Video memory buffer width.
+
                                Blur factor (1-127)
−
      --vmem-height=<integer>    Height
+
           The degree of blurring from 1 to 127.
−
          Video memory buffer height.
 
−
      --vmem-pitch=<integer>     Pitch
 
−
          Video memory buffer pitch in bytes.
 
−
      --vmem-chroma=<string>    Chroma
 
−
          Output chroma for the memory image as a 4-character string, eg.
 
−
           "RV32".
 
  
−
  Visualizer filter
+
  Mirror video filter (mirror)
−
  General:
+
Splits video in two same parts, like in a mirror
−
      --effect-list=<string>    Effects list
+
       --mirror-split={0 (Vertical), 1 (Horizontal)}
−
          A list of visual effect, separated by commas.
+
                                 Mirror orientation
−
Current effects
+
           Defines orientation of the mirror splitting. Can be vertical or
−
          include: dummy, scope, spectrum, spectrometer and vuMeter.
+
           horizontal.
−
      --effect-width=<integer>  Video width
+
       --mirror-direction={0 (Left to right/Top to bottom), 1 (Right to left/Bottom to top)}
−
          The width of the effects video window, in pixels.
+
                                 Direction
−
       --effect-height=<integer>  Video height
+
           Direction of the mirroring.
−
          The height of the effects video window, in pixels.
 
−
  Spectrum analyser:
 
−
      --visual-80-bands, --no-visual-80-bands
 
−
                                More bands : 80 / 20 (default enabled)
 
−
          More bands for the spectrum analyzer : 80 if enabled else 20.
 
−
          (default enabled)
 
−
      --visual-peaks, --no-visual-peaks
 
−
                                Enable peaks (default enabled)
 
−
          Draw "peaks" in the spectrum analyzer. (default enabled)
 
−
  Spectrometer:
 
−
      --spect-show-original, --no-spect-show-original
 
−
                                Enable original graphic spectrum (default
 
−
                                disabled)
 
−
          Enable the "flat" spectrum analyzer in the spectrometer. (default
 
−
          disabled)
 
−
      --spect-show-base, --no-spect-show-base
 
−
                                 Enable base (default enabled)
 
−
           Defines whether to draw the base of the bands. (default enabled)
 
−
      --spect-radius=<integer>  Base pixel radius
 
−
           Defines radius size in pixels, of base of bands(beginning).
 
−
      --spect-sections=<integer> Spectral sections
 
−
          Determines how many sections of spectrum will exist.
 
−
       --spect-color=<integer>    V-plane color
 
−
          YUV-Color cube shifting across the V-plane ( 0 - 127 ).
 
−
      --spect-show-bands, --no-spect-show-bands
 
−
                                Enable bands (default enabled)
 
−
          Draw bands in the spectrometer. (default enabled)
 
−
      --spect-80-bands, --no-spect-80-bands
 
−
                                More bands : 80 / 20 (default enabled)
 
−
          More bands for the spectrometer : 80 if enabled else 20. (default
 
−
          enabled)
 
−
      --spect-separ=<integer>    Band separator
 
−
          Number of blank pixels between bands.
 
−
      --spect-amp=<integer>      Amplification
 
−
          This is a coefficient that modifies the height of the bands.
 
−
      --spect-show-peaks, --no-spect-show-peaks
 
−
                                Enable peaks (default enabled)
 
−
          Draw "peaks" in the spectrum analyzer. (default enabled)
 
−
      --spect-peak-width=<integer>
 
−
                                Peak extra width
 
−
          Additions or subtractions of pixels on the peak width.
 
−
      --spect-peak-height=<integer>
 
−
                                 Peak height
 
−
           Total pixel height of the peak items.
 
  
−
  VCD input
+
  High Quality 3D Denoiser filter (hqdn3d)
−
       --vcd-caching=<integer>   Caching value in ms
+
       --hqdn3d-luma-spat=<float [0.000000 .. 254.000000]>
−
           Caching value for VCDs. This value should be set in milliseconds.
+
                                Spatial luma strength (0-254)
 +
          Spatial luma strength (0-254)
 +
      --hqdn3d-chroma-spat=<float [0.000000 .. 254.000000]>
 +
                                Spatial chroma strength (0-254)
 +
          Spatial chroma strength (0-254)
 +
      --hqdn3d-luma-temp=<float [0.000000 .. 254.000000]>  
 +
                                Temporal luma strength (0-254)
 +
           Temporal luma strength (0-254)
 +
      --hqdn3d-chroma-temp=<float [0.000000 .. 254.000000]>
 +
                                Temporal chroma strength (0-254)
 +
          Temporal chroma strength (0-254)
  
−
  VC1 video demuxer
+
  Grain video filter (grain)
−
       --vc1-fps=<float>         Frames per Second
+
Adds filtered gaussian noise
−
           Desired frame rate for the VC-1 stream.
+
       --grain-variance=<float [0.000000 .. 10.000000]>  
 +
                                Variance
 +
           Variance of the gaussian noise
 +
      --grain-period-min=<integer [1 .. 64]>
 +
                                Minimal period
 +
          Minimal period of the noise grain in pixel
 +
      --grain-period-max=<integer [1 .. 64]>
 +
                                Maximal period
 +
          Maximal period of the noise grain in pixel
  
−
  Libtwolame audio encoder
+
  Gradient video filter (gradient)
−
       --sout-twolame-quality=<float>
+
Apply color gradient or edge detection effects
−
                                 Encoding quality
+
       --gradient-mode={gradient,edge,hough}
−
           Force a specific encoding quality between 0.0 (high) and 50.0 (low),
+
                                 Distort mode
−
          instead of specifying a particular bitrate. This will produce a VBR
+
           Distort mode, one of "gradient", "edge" and "hough".
−
          stream.
+
       --gradient-type=<integer [0 .. 1]>
−
       --sout-twolame-mode={0 (Stereo), 1 (Dual mono), 2 (Joint stereo)}
+
                                Gradient image type
−
                                Stereo mode
+
          Gradient image type (0 or 1). 0 will turn the image to white while 1
−
           Handling mode for stereo streams
+
           will keep colors.
−
       --sout-twolame-vbr, --no-sout-twolame-vbr
+
       --gradient-cartoon, --no-gradient-cartoon
−
                                 VBR mode (default disabled)
+
                                Apply cartoon effect
−
           Use Variable BitRate. Default is to use Constant BitRate (CBR).
+
                                 (default enabled)
−
          (default disabled)
+
           Apply cartoon effect. It is only used by "gradient" and "edge".
−
      --sout-twolame-psy=<integer>
 
−
                                Psycho-acoustic model
 
−
          Integer from -1 (no model) to 4.
 
  
−
  MPEG Transport Stream demuxer
+
  Gradfun video filter (gradfun)
−
       --ts-extra-pmt=<string>    Extra PMT
+
Debanding algorithm
−
          Allows a user to specify an extra pmt (pmt_pid=pid:stream_type[,...]).
+
       --gradfun-radius=<integer [4 .. 32]>
−
      --ts-es-id-pid, --no-ts-es-id-pid
+
                                 Radius
−
                                 Set id of ES to PID (default enabled)
+
           Radius in pixels
−
           Set the internal ID of each elementary stream handled by VLC to the
+
       --gradfun-strength=<float [0.510000 .. 255.000000]>  
−
          same value as the PID in the TS stream, instead of 1, 2, 3, etc.
+
                                Strength
−
          Useful to do '#duplicate{..., select="es=<pid>"}'. (default enabled)
+
           Strength used to modify the value of a pixel
−
       --ts-out=<string>          Fast udp streaming
 
−
          Sends TS to specific ip:port by udp (you must know what you are
 
−
          doing).
 
−
      --ts-out-mtu=<integer>    MTU for out mode
 
−
          MTU for out mode.
 
−
      --ts-csa-ck=<string>       CSA ck
 
−
          Control word for the CSA encryption algorithm
 
−
      --ts-csa2-ck=<string>      CSA ck
 
−
           Control word for the CSA encryption algorithm
 
−
      --ts-csa-pkt=<integer>    Packet size in bytes to decrypt
 
−
          Specify the size of the TS packet to decrypt. The decryption routines
 
−
          subtract the TS-header from the value before decrypting.
 
−
      --ts-silent, --no-ts-silent
 
−
                                Silent mode (default disabled)
 
−
          Do not complain on encrypted PES. (default disabled)
 
−
      --ts-dump-file=<string>    Filename of dump
 
−
          Specify a filename where to dump the TS in.
 
−
      --ts-dump-append, --no-ts-dump-append
 
−
                                Append (default disabled)
 
−
          If the file exists and this option is selected, the existing file
 
−
          will not be overwritten. (default disabled)
 
−
      --ts-dump-size=<integer>  Dump buffer size
 
−
          Tweak the buffer size for reading and writing an integer number of
 
−
          packets.Specify the size of the buffer here and not the number of
 
−
          packets.
 
−
      --ts-split-es, --no-ts-split-es
 
−
                                Separate sub-streams (default enabled)
 
−
          Separate teletex/dvbs pages into independent ES. It can be useful to
 
−
          turn off this option when using stream output. (default enabled)
 
  
−
  Video transformation filter
+
  Gaussian blur video filter (gaussianblur)
−
  Rotate or flip the video
+
  Add a blurring effect
−
       --transform-type={90,180,270,hflip,vflip}
+
       --gaussianblur-sigma=<float [0.010000 .. 4096.000000]>
−
                                 Transform type
+
                                 Gaussian's std deviation
−
           One of '90', '180', '270', 'hflip' and 'vflip'
+
           Gaussian's standard deviation. The blurring will take into account
 +
          pixels up to 3*sigma away in any direction.
  
−
  Theora video decoder
+
  FPS conversion video filter (fps)
−
       --sout-theora-quality=<integer>
+
       --fps-fps=<string>         Frame rate
−
                                Encoding quality
+
           Frame rate
−
          Enforce a quality between 1 (low) and 10 (high), instead of
 
−
           specifying a particular bitrate. This will produce a VBR stream.
 
  
−
  Video scaling filter
+
  Extract RGB component video filter (extract)
−
       --swscale-mode={0 (Fast bilinear), 1 (Bilinear), 2 (Bicubic (good quality)), 3 (Experimental), 4 (Nearest neighbour (bad quality)), 5 (Area), 6 (Luma bicubic / chroma bilinear), 7 (Gauss), 8 (SincR), 9 (Lanczos), 10 (Bicubic spline)}
+
       --extract-component={16711680 (Red), 65280 (Green), 255 (Blue)}  
−
                                 Scaling mode
+
                                 RGB component to extract
−
           Scaling mode to use.
+
           RGB component to extract. 0 for Red, 1 for Green and 2 for Blue.
  
−
  Philips OGT (SVCD subtitle) decoder
+
  Erase video filter (erase)
−
       --svcdsub-debug=<integer> Enable debug
+
Remove zones of the video using a picture as mask
−
           This integer when viewed in binary is a debugging mask
+
      --erase-mask=<string>      Image mask
−
calls       
+
          Image mask. Pixels with an alpha value greater than 50% will be
−
                1
+
          erased.
−
packet assembly info  2
+
       --erase-x=<integer>       X coordinate
 +
           X coordinate of the mask.
 +
      --erase-y=<integer>        Y coordinate
 +
          Y coordinate of the mask.
  
 +
Deinterlacing video filter (deinterlace)
 +
      --sout-deinterlace-mode={discard,blend,mean,bob,linear,x,yadif,yadif2x,phosphor,ivtc}
 +
                                Streaming deinterlace mode
 +
          Deinterlace method to use for streaming.
 +
      --sout-deinterlace-phosphor-chroma={1 (Latest), 2 (AltLine), 3 (Blend), 4 (Upconvert)}
 +
                                Phosphor chroma mode for 4:2:0 input
 +
          Choose handling for colours in those output frames that fall across
 +
          input frame boundaries.  Latest: take chroma from new (bright) field
 +
          only. Good for interlaced input, such as videos from a camcorder. 
 +
          AltLine: take chroma line 1 from top field, line 2 from bottom field,
 +
          etc.  Default, good for NTSC telecined input (anime DVDs, etc.). 
 +
          Blend: average input field chromas. May distort the colours of the
 +
          new (bright) field, too.  Upconvert: output in 4:2:2 format
 +
          (independent chroma for each field). Best simulation, but requires
 +
          more CPU and memory bandwidth.
 +
      --sout-deinterlace-phosphor-dimmer={1 (Off), 2 (Low), 3 (Medium), 4 (High)}
 +
                                Phosphor old field dimmer strength
 +
          This controls the strength of the darkening filter that simulates CRT
 +
          TV phosphor light decay for the old field in the Phosphor framerate
 +
          doubler. Default: Low.
  
−
  Text subtitles parser
+
  Video cropping filter (croppadd)
−
       --sub-fps=<float>         Frames per second
+
  Crop:
−
           Override the normal frames per second settings. This will only work
+
       --croppadd-croptop=<integer [0 .. 2147483647]>  
−
           with MicroDVD and SubRIP (SRT) subtitles.
+
                                Pixels to crop from top
−
       --sub-delay=<integer>     Subtitles delay
+
           Number of pixels to crop from the top of the image.
−
           Apply a delay to all subtitles (in 1/10s, eg 100 means 10s).
+
      --croppadd-cropbottom=<integer [0 .. 2147483647]>
−
       --sub-type={auto,microdvd,subrip,subviewer,ssa1,ssa2-4,ass,vplayer,sami,dvdsubtitle,mpl2,aqt,pjs,mpsub,jacosub,psb,realtext,dks,subviewer1}
+
                                Pixels to crop from bottom
−
                                 Subtitles format
+
           Number of pixels to crop from the bottom of the image.
−
           Force the subtiles format. Valid values are : "microdvd", "subrip",
+
       --croppadd-cropleft=<integer [0 .. 2147483647]>  
−
           "subviewer", "ssa1", "ssa2-4", "ass", "vplayer", "sami",
+
                                Pixels to crop from left
−
           "dvdsubtitle", "mpl2", "aqt", "pjs", "mpsub", "jacosub", "psb",
+
           Number of pixels to crop from the left of the image.
−
          "realtext", "dks", "subviewer1",  and "auto" (meaning autodetection,
+
       --croppadd-cropright=<integer [0 .. 2147483647]>
−
           this should always work).
+
                                 Pixels to crop from right
−
       --sub-description=<string> Subtitles description
+
           Number of pixels to crop from the right of the image.
−
           Override the default track description.
+
  Padd:
 +
      --croppadd-paddtop=<integer [0 .. 2147483647]>
 +
                                Pixels to padd to top
 +
           Number of pixels to padd to the top of the image after cropping.
 +
      --croppadd-paddbottom=<integer [0 .. 2147483647]>
 +
                                Pixels to padd to bottom
 +
           Number of pixels to padd to the bottom of the image after cropping.
 +
      --croppadd-paddleft=<integer [0 .. 2147483647]>
 +
                                Pixels to padd to left
 +
           Number of pixels to padd to the left of the image after cropping.
 +
       --croppadd-paddright=<integer [0 .. 2147483647]>  
 +
                                Pixels to padd to right
 +
           Number of pixels to padd to the right of the image after cropping.
  
−
  Text subtitles decoder
+
  Color threshold filter (colorthres)
−
       --subsdec-align={0 (Center), 1 (Left), 2 (Right)}
+
Select one color in the video
−
                                Subtitles justification
+
       --colorthres-color={16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 65280 (Lime), 255 (Blue), 65535 (Aqua)}  
−
          Set the justification of subtitles
+
                                 Color
−
      --subsdec-encoding={,UTF-8,UTF-16,UTF-16BE,UTF-16LE,GB18030,ISO-8859-15,Windows-1252,ISO-8859-2,Windows-1250,ISO-8859-3,ISO-8859-10,Windows-1251,KOI8-R,KOI8-U,ISO-8859-6,Windows-1256,ISO-8859-7,Windows-1253,ISO-8859-8,Windows-1255,ISO-8859-9,Windows-1254,ISO-8859-11,Windows-874,ISO-8859-13,Windows-1257,ISO-8859-14,ISO-8859-16,ISO-2022-CN-EXT,EUC-CN,ISO-2022-JP-2,EUC-JP,Shift_JIS,CP949,ISO-2022-KR,Big5,ISO-2022-TW,Big5-HKSCS,VISCII,Windows-1258}
+
           Colors similar to this will be kept, others will be grayscaled. This
−
                                 Subtitles text encoding
+
          must be an hexadecimal (like HTML colors). The first two chars are
−
           Set the encoding used in text subtitles
+
           for red, then green, then blue. #000000 = black, #FF0000 = red,
−
      --subsdec-autodetect-utf8, --no-subsdec-autodetect-utf8
+
           #00FF00 = green, #FFFF00 = yellow (red + green), #FFFFFF = white
−
                                UTF-8 subtitles autodetection (default
+
       --colorthres-saturationthres=<integer>
−
                                enabled)
+
                                Saturation threshold
−
           This enables automatic detection of UTF-8 encoding within subtitles
+
      --colorthres-similaritythres=<integer>
−
           files. (default enabled)
+
                                 Similarity threshold
−
       --subsdec-formatted, --no-subsdec-formatted
 
−
                                 Formatted Subtitles (default enabled)
 
−
          Some subtitle formats allow for text formatting. VLC partly
 
−
          implements this, but you can choose to disable all formatting.
 
−
          (default enabled)
 
  
−
  Transcode stream output
+
  Canvas video filter (canvas)
−
  Video:
+
Automatically resize and pad a video
−
      --sout-transcode-venc=<string>
+
       --canvas-width=<integer [0 .. 2147483647]>  
−
                                Video encoder
+
                                 Output width
−
          This is the video encoder module that will be used (and its
+
           Output (canvas) image width
−
          associated options).
+
       --canvas-height=<integer [0 .. 2147483647]>  
−
      --sout-transcode-vcodec=<string>
+
                                 Output height
−
                                Destination video codec
+
           Output (canvas) image height
−
          This is the video codec that will be used.
+
       --canvas-aspect=<string>   Output picture aspect ratio
−
       --sout-transcode-vb=<integer>
+
           Set the canvas' picture aspect ratio. If omitted, the canvas is
−
                                 Video bitrate
+
           assumed to have the same SAR as the input.
−
           Target bitrate of the transcoded video stream.
+
       --canvas-padd, --no-canvas-padd
−
       --sout-transcode-scale=<float>
+
                                 Pad video
−
                                 Video scaling
+
                                (default enabled)
−
           Scale factor to apply to the video while transcoding (eg: 0.25)
+
           If enabled, video will be padded to fit in canvas after scaling.
−
       --sout-transcode-fps=<float>
+
           Otherwise, video will be cropped to fix in canvas after scaling.
−
                                Video frame-rate
+
 
−
           Target output frame rate for the video stream.
+
Bluescreen video filter (bluescreen)
−
      --sout-transcode-hurry-up, --no-sout-transcode-hurry-up
+
This effect, also known as "greenscreen" or "chroma key" blends the "blue parts" of the foreground image of the mosaic on the background (like weather forecasts). You can choose the "key" color for blending (blue by default).
−
                                Hurry up (default enabled)
+
       --bluescreen-u=<integer [0 .. 255]>  
−
           The transcoder will drop frames if your CPU can't keep up with the
+
                                 Bluescreen U value
−
          encoding rate. (default enabled)
+
           "U" value for the bluescreen key color (in YUV values). From 0 to
−
       --sout-transcode-deinterlace, --no-sout-transcode-deinterlace
+
           255. Defaults to 120 for blue.
−
                                 Deinterlace video (default disabled)
+
       --bluescreen-v=<integer [0 .. 255]>  
−
           Deinterlace the video before encoding. (default disabled)
+
                                 Bluescreen V value
−
      --sout-transcode-deinterlace-module={deinterlace,ffmpeg-deinterlace}
+
           "V" value for the bluescreen key color (in YUV values). From 0 to
−
                                Deinterlace module
+
           255. Defaults to 90 for blue.
−
          Specify the deinterlace module to use.
+
       --bluescreen-ut=<integer [0 .. 255]>  
−
      --sout-transcode-width=<integer>
+
                                 Bluescreen U tolerance
−
                                Video width
+
           Tolerance of the bluescreen blender on color variations for the U
−
           Output video width.
+
          plane. A value between 10 and 20 seems sensible.
−
      --sout-transcode-height=<integer>
+
       --bluescreen-vt=<integer [0 .. 255]>  
−
                                Video height
+
                                 Bluescreen V tolerance
−
          Output video height.
+
           Tolerance of the bluescreen blender on color variations for the V
−
      --sout-transcode-maxwidth=<integer>
+
           plane. A value between 10 and 20 seems sensible.
−
                                Maximum video width
+
 
−
          Maximum output video width.
+
Blending benchmark filter (blendbench)
−
      --sout-transcode-maxheight=<integer>
+
  Benchmarking:
−
                                Maximum video height
+
       --blendbench-loops=<integer>  
−
          Maximum output video height.
+
                                 Number of time to blend
−
      --sout-transcode-vfilter=<string>
+
           The number of time the blend will be performed
−
                                Video filter
+
       --blendbench-alpha=<integer [0 .. 255]>  
−
          Video filters will be applied to the video streams (after overlays
+
                                 Alpha of the blended image
−
          are applied). You can enter a colon-separated list of filters.
+
           Alpha with which the blend image is blended
−
  Audio:
+
  Base image:
−
       --sout-transcode-aenc=<string>
+
       --blendbench-base-image=<string>  
−
                                 Audio encoder
+
                                 Image to be blended onto
−
           This is the audio encoder module that will be used (and its
+
           The image which will be used to blend onto
−
          associated options).
+
       --blendbench-base-chroma=<string>  
−
      --sout-transcode-acodec=<string>
+
                                 Chroma for the base image
−
                                Destination audio codec
+
           Chroma which the base image will be loaded in
−
           This is the audio codec that will be used.
+
   Blend image:
−
       --sout-transcode-ab=<integer>
+
       --blendbench-blend-image=<string>
−
                                 Audio bitrate
+
                                 Image which will be blended
−
           Target bitrate of the transcoded audio stream.
+
           The image blended onto the base image
−
      --sout-transcode-alang=<string>
+
       --blendbench-blend-chroma=<string>  
−
                                Audio Language
+
                                 Chroma for the blend image
−
           This is the language of the audio stream.
+
           Chroma which the blend image will be loaded in
−
       --sout-transcode-channels=<integer>
 
−
                                 Audio channels
 
−
           Number of audio channels in the transcoded streams.
 
−
       --sout-transcode-samplerate=<integer>
 
−
                                 Audio sample rate
 
−
           Sample rate of the transcoded audio stream (11250, 22500, 44100 or
 
−
           48000).
 
−
      --sout-transcode-audio-sync, --no-sout-transcode-audio-sync
 
−
                                Synchronise on audio track (default disabled)
 
−
          This option will drop/duplicate video frames to synchronise the video
 
−
          track on the audio track. (default disabled)
 
−
       --sout-transcode-afilter=<string>
 
−
                                 Audio filter
 
−
           Audio filters will be applied to the audio streams (after conversion
 
−
          filters are applied). You can enter a colon-separated list of filters.
 
−
  Overlays/Subtitles:
 
−
       --sout-transcode-senc=<string>
 
−
                                 Subtitles encoder
 
−
           This is the subtitles encoder module that will be used (and its
 
−
          associated options).
 
−
       --sout-transcode-scodec=<string>
 
−
                                 Destination subtitles codec
 
−
          This is the subtitles codec that will be used.
 
−
      --sout-transcode-soverlay, --no-sout-transcode-soverlay
 
−
                                Destination subtitles codec (default disabled)
 
−
           This is the subtitles codec that will be used. (default disabled)
 
−
       --sout-transcode-sfilter=<string>
 
−
                                 Overlays
 
−
          This allows you to add overlays (also known as "subpictures" on the
 
−
           transcoded video stream. The subpictures produced by the filters will
 
−
          be overlayed directly onto the video. You can specify a
 
−
          colon-separated list of subpicture modules
 
−
   On Screen Display:
 
−
       --sout-transcode-osd, --no-sout-transcode-osd
 
−
                                 OSD menu (default disabled)
 
−
           Stream the On Screen Display menu (using the osdmenu subpicture
 
−
          module). (default disabled)
 
−
  Miscellaneous:
 
−
       --sout-transcode-threads=<integer>
 
−
                                 Number of threads
 
−
          Number of threads used for the transcoding.
 
−
      --sout-transcode-high-priority, --no-sout-transcode-high-priority
 
−
                                High priority (default disabled)
 
−
           Runs the optional encoder thread at the OUTPUT priority instead of
 
−
          VIDEO. (default disabled)
 
  
−
  Standard stream output
+
  Ball video filter (ball)
−
       --sout-standard-access=<string>
+
Augmented reality ball game
−
                                 Output access method
+
       --ball-color={red,green,blue,white}
−
           Output method to use for the stream.
+
                                 Ball color
−
       --sout-standard-mux=<string>
+
           Ball color
−
                                 Output muxer
+
       --ball-speed=<integer [1 .. 15]>  
−
           Muxer to use for the stream.
+
                                 Ball speed
−
       --sout-standard-dst=<string>
+
           Set ball speed, the displacement value                             
−
                                 Output destination
+
          in number of pixels by frame.
−
           Destination (URL) to use for the stream. Overrides path and bind
+
       --ball-size=<integer [5 .. 30]>  
−
          parameters
+
                                 Ball size
−
       --sout-standard-bind=<string>
+
           Set ball size giving its radius in number                           
−
                                 address to bind to (helper setting for dst)
+
              of pixels
−
          address:port to bind vlc to listening incoming streams helper setting
+
       --ball-gradient-threshold=<integer [1 .. 200]>  
−
           for dst,dst=bind+'/'+path. dst-parameter overrides this
+
                                 Gradient threshold
−
      --sout-standard-path=<string>
+
           Set gradient threshold for edge computation.
−
                                filename for stream (helper setting for dst)
+
       --ball-edge-visible, --no-ball-edge-visible
−
          Filename for stream helper setting for dst, dst=bind+'/'+path,
+
                                Edge visible
−
          dst-parameter overrides this
+
                                 (default enabled)
−
       --sout-standard-sap, --no-sout-standard-sap
+
           Set edge visibility.
−
                                 SAP announcing (default disabled)
+
 
−
           Announce this session with SAP. (default disabled)
+
Antiflicker video filter (antiflicker)
−
      --sout-standard-name=<string>
+
       --antiflicker-window-size=<integer [0 .. 100]>  
−
                                Session name
+
                                 Window size
−
          This is the name of the session that will be announced in the SDP
+
           Number of frames (0 to 100)
−
          (Session Descriptor).
+
       --antiflicker-softening-size=<integer [0 .. 31]>  
−
       --sout-standard-group=<string>
+
                                 Softening value
−
                                Session groupname
+
           Number of frames consider for smoothening (0 to 30)
−
          This allows you to specify a group for the session, that will be
 
−
          announced if you choose to use SAP.
 
−
      --sout-standard-description=<string>
 
−
                                Session description
 
−
          This allows you to give a short description with details about the
 
−
          stream, that will be announced in the SDP (Session Descriptor).
 
−
      --sout-standard-url=<string>
 
−
                                 Session URL
 
−
          This allows you to give an URL with more details about the stream
 
−
           (often the website of the streaming organization), that will be
 
−
          announced in the SDP (Session Descriptor).
 
−
       --sout-standard-email=<string>
 
−
                                 Session email
 
−
           This allows you to give a contact mail address for the stream, that
 
−
          will be announced in the SDP (Session Descriptor).
 
−
      --sout-standard-phone=<string>
 
−
                                Session phone number
 
−
          This allows you to give a contact telephone number for the stream,
 
−
          that will be announced in the SDP (Session Descriptor).
 
  
−
  Stream output to memory buffer
+
  Convert 3D picture to anaglyph image video filter (anaglyph)
−
      --sout-smem-video-prerender-callback=<string>
+
       --anaglyph-scheme={red-green,red-blue,red-cyan,trioscopic,magenta-cyan}
−
                                Video prerender callback
+
                                 Color scheme
−
          Address of the video prerender callback functionthis function will
+
           Define the glasses' color scheme
−
          set the buffer where render will be done
 
−
       --sout-smem-audio-prerender-callback=<string>
 
−
                                Audio prerender callback
 
−
          Address of the audio prerender callback function.this function will
 
−
          set the buffer where render will be done
 
−
      --sout-smem-video-postrender-callback=<string>
 
−
                                Video postrender callback
 
−
          Address of the video postrender callback function.this function will
 
−
          be called when the render is into the buffer
 
−
      --sout-smem-audio-postrender-callback=<string>
 
−
                                 Audio postrender callback
 
−
           Address of the audio postrender callback function.this function will
 
−
          be called when the render is into the buffer
 
−
      --sout-smem-video-data=<string>
 
−
                                Video Callback data
 
−
          Data for the video callback function.
 
−
      --sout-smem-audio-data=<string>
 
−
                                Audio callback data
 
−
          Data for the video callback function.
 
−
      --sout-smem-time-sync, --no-sout-smem-time-sync
 
−
                                Time Synchronized output (default enabled)
 
−
          Time Synchronisation option for output. If true, stream will render
 
−
          as usual, else it will be rendered as fast as possible. (default
 
−
          enabled)
 
  
−
  RTP stream output
+
  Alpha mask video filter (alphamask)
−
      --sout-rtp-dst=<string>    Destination
+
Use an image's alpha channel as a transparency mask.
−
          This is the output URL that will be used.
+
       --alphamask-mask=<string> Transparency mask
−
      --sout-rtp-sdp=<string>    SDP
+
           Alpha blending transparency mask. Uses a png alpha channel.
−
          This allows you to specify how the SDP (Session Descriptor) for this
+
 
−
          RTP session will be made available. You must use an url:
+
Image properties filter (adjust)
−
          http://location to access the SDP via HTTP, rtsp://location for RTSP
+
       --contrast=<float [0.000000 .. 2.000000]>  
−
          access, and sap:// for the SDP to be announced via SAP.
+
                                Image contrast (0-2)
−
       --sout-rtp-mux=<string>   Muxer
+
           Set the image contrast, between 0 and 2. Defaults to 1.
−
           This allows you to specify the muxer used for the streaming output.
+
       --brightness=<float [0.000000 .. 2.000000]>  
−
          Default is to use no muxer (standard RTP stream).
+
                                Image brightness (0-2)
−
      --sout-rtp-sap, --no-sout-rtp-sap
+
           Set the image brightness, between 0 and 2. Defaults to 1.
−
                                SAP announcing (default disabled)
+
       --hue=<float [-180.000000 .. 180.000000]>  
−
          Announce this session with SAP. (default disabled)
+
                                Image hue (-180..180)
−
       --sout-rtp-name=<string>   Session name
+
           Set the image hue, between -180 and 180. Defaults to 0.
−
          This is the name of the session that will be announced in the SDP
+
       --saturation=<float [0.000000 .. 3.000000]>  
−
          (Session Descriptor).
+
                                 Image saturation (0-3)
−
      --sout-rtp-description=<string>
+
           Set the image saturation, between 0 and 3. Defaults to 1.
−
                                Session description
+
       --gamma=<float [0.010000 .. 10.000000]>  
−
           This allows you to give a short description with details about the
+
                                Image gamma (0-10)
−
          stream, that will be announced in the SDP (Session Descriptor).
+
           Set the image gamma, between 0.01 and 10. Defaults to 1.
−
       --sout-rtp-url=<string>   Session URL
+
       --brightness-threshold, --no-brightness-threshold
−
          This allows you to give an URL with more details about the stream
+
                                Brightness threshold
−
          (often the website of the streaming organization), that will be
+
                                 (default disabled)
−
           announced in the SDP (Session Descriptor).
+
           When this mode is enabled, pixels will be shown as black or white.
−
       --sout-rtp-email=<string> Session email
+
           The threshold value will be the brightness defined below.
−
          This allows you to give a contact mail address for the stream, that
+
 
−
          will be announced in the SDP (Session Descriptor).
+
Video scaling filter (swscale)
−
      --sout-rtp-phone=<string>  Session phone number
+
       --swscale-mode={0 (Fast bilinear), 1 (Bilinear), 2 (Bicubic (good quality)), 3 (Experimental), 4 (Nearest neighbour (bad quality)), 5 (Area), 6 (Luma bicubic / chroma bilinear), 7 (Gauss), 8 (SincR), 9 (Lanczos), 10 (Bicubic spline)}
−
           This allows you to give a contact telephone number for the stream,
+
                                 Scaling mode
−
          that will be announced in the SDP (Session Descriptor).
+
           Scaling mode to use.
−
      --sout-rtp-proto={dccp,sctp,tcp,udp,udplite}
+
 
−
                                Transport protocol
+
Speech synthesis for Windows (sapi)
−
          This selects which transport protocol to use for RTP.
+
       --sapi-voice=<integer>     Voice Index
−
       --sout-rtp-port=<integer>  Port
+
           Voice index
−
          This allows you to specify the base port for the RTP streaming.
 
−
      --sout-rtp-port-audio=<integer>
 
−
                                 Audio port
 
−
           This allows you to specify the default audio port for the RTP
 
−
          streaming.
 
−
      --sout-rtp-port-video=<integer>
 
−
                                Video port
 
−
          This allows you to specify the default video port for the RTP
 
−
          streaming.
 
−
       --sout-rtp-ttl=<integer>   Hop limit (TTL)
 
−
          This is the hop limit (also known as "Time-To-Live" or TTL) of the
 
−
           multicast packets sent by the stream output (-1 = use operating
 
−
          system built-in default).
 
−
       --sout-rtp-rtcp-mux, --no-sout-rtp-rtcp-mux
 
−
                                 RTP/RTCP multiplexing (default disabled)
 
−
           This sends and receives RTCP packet multiplexed over the same port as
 
−
           RTP packets. (default disabled)
 
−
       --sout-rtp-caching=<integer>
 
−
                                 Caching value (ms)
 
−
           Default caching value for outbound RTP streams. This value should be
 
−
          set in milliseconds.
 
−
      --sout-rtp-key=<string>    SRTP key (hexadecimal)
 
−
          RTP packets will be integrity-protected and ciphered with this Secure
 
−
          RTP master shared secret key.
 
−
       --sout-rtp-salt=<string>   SRTP salt (hexadecimal)
 
−
           Secure RTP requires a (non-secret) master salt value.
 
−
      --sout-rtp-mp4a-latm, --no-sout-rtp-mp4a-latm
 
−
                                MP4A LATM (default disabled)
 
−
          This allows you to stream MPEG4 LATM audio streams (see RFC3016).
 
−
          (default disabled)
 
  
−
  Record stream output
+
  Freetype2 font renderer (freetype)
−
       --sout-record-dst-prefix=<string>
+
       --freetype-font=<string>  Font
−
                                 Destination prefix
+
          Font family for the font you want to use
−
           Prefix of the destination file automatically generated
+
      --freetype-monofont=<string>  
−
 
+
                                 Monospace Font
−
Remote Audio Output Protocol stream output
+
           Font family for the font you want to use
−
       --sout-raop-host=<string> Host
+
       --freetype-opacity=<integer [0 .. 255]>  
−
           Hostname or IP address of target device
+
                                Text opacity
−
       --sout-raop-password=<string>
+
           The opacity (inverse of transparency) of the text that will be
−
                                 Password
+
          rendered on the video. 0 = transparent, 255 = totally opaque.
−
           Password for target device.
+
       --freetype-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
−
       --sout-raop-password-file=<string>
+
                                 Text default color
−
                                 Password file
+
           The color of the text that will be rendered on the video. This must
−
          Read password for target device from file.
+
          be an hexadecimal (like HTML colors). The first two chars are for
−
       --sout-raop-volume=<integer [0 .. 255]>
+
          red, then green, then blue. #000000 = black, #FF0000 = red, #00FF00 =
−
                                 Volume
+
          green, #FFFF00 = yellow (red + green), #FFFFFF = white
−
          Output volume for analog output: 0 for silence, 1..255 from almost
+
       --freetype-bold, --no-freetype-bold
−
           silent to very loud.
+
                                Force bold
−
 
+
                                (default disabled)
−
  Mosaic bridge stream output
+
      --freetype-background-opacity=<integer [0 .. 255]>  
−
       --sout-mosaic-bridge-id=<string>
+
                                 Background opacity
−
                                 ID
+
      --freetype-background-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
−
           Specify an identifier string for this subpicture
+
                                Background color
−
       --sout-mosaic-bridge-width=<integer>
+
      --freetype-outline-opacity=<integer [0 .. 255]>
 +
                                Outline opacity
 +
       --freetype-outline-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
 +
                                Outline color
 +
      --freetype-outline-thickness={0 (None), 2 (Thin), 4 (Normal), 6 (Thick)}
 +
                                Outline thickness
 +
      --freetype-shadow-opacity=<integer [0 .. 255]>  
 +
                                 Shadow opacity
 +
      --freetype-shadow-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
 +
                                Shadow color
 +
      --freetype-shadow-angle=<float [-360.000000 .. 360.000000]>
 +
                                Shadow angle
 +
      --freetype-shadow-distance=<float [0.000000 .. 1.000000]>
 +
                                Shadow distance
 +
      --freetype-yuvp, --no-freetype-yuvp
 +
                                Use YUVP renderer
 +
                                (default disabled)
 +
          This renders the font using "paletized YUV". This option is only
 +
           needed if you want to encode into DVB subtitles
 +
      --freetype-text-direction={0 (Left to right), 1 (Right to left), 2 (Auto)}
 +
                                Text direction
 +
          Paragraph base direction for the Unicode bi-directional algorithm.
 +
 
 +
  Transcode stream output (stream_out_transcode)
 +
  Video:
 +
       --sout-transcode-venc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none}
 +
                                Video encoder
 +
          This is the video encoder module that will be used (and its
 +
          associated options).
 +
      --sout-transcode-vcodec=<string>  
 +
                                 Destination video codec
 +
           This is the video codec that will be used.
 +
      --sout-transcode-vb=<integer>
 +
                                Video bitrate
 +
          Target bitrate of the transcoded video stream.
 +
      --sout-transcode-scale=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Video scaling
 +
          Scale factor to apply to the video while transcoding (eg: 0.25)
 +
      --sout-transcode-fps=<string>
 +
                                Video frame-rate
 +
          Target output frame rate for the video stream.
 +
      --sout-transcode-deinterlace, --no-sout-transcode-deinterlace
 +
                                Deinterlace video
 +
                                (default disabled)
 +
          Deinterlace the video before encoding.
 +
       --sout-transcode-deinterlace-module={deinterlace,ffmpeg-deinterlace}
 +
                                Deinterlace module
 +
          Specify the deinterlace module to use.
 +
      --sout-transcode-width=<integer>  
 
                                 Video width
 
                                 Video width
 
           Output video width.
 
           Output video width.
−
       --sout-mosaic-bridge-height=<integer>
+
       --sout-transcode-height=<integer>  
 
                                 Video height
 
                                 Video height
 
           Output video height.
 
           Output video height.
−
       --sout-mosaic-bridge-sar=<string>
+
       --sout-transcode-maxwidth=<integer>  
−
                                 Sample aspect ratio
+
                                 Maximum video width
−
           Sample aspect ratio of the destination (1:1, 3:4, 2:3).
+
           Maximum output video width.
−
       --sout-mosaic-bridge-chroma=<string>
+
       --sout-transcode-maxheight=<integer>  
−
                                 Image chroma
+
                                 Maximum video height
−
           Force the use of a specific chroma. Use YUVA if you're planning to
+
           Maximum output video height.
−
          use the Alphamask or Bluescreen video filter.
+
       --sout-transcode-vfilter=<string>  
−
       --sout-mosaic-bridge-vfilter=<string>
 
 
                                 Video filter
 
                                 Video filter
−
           Video filters will be applied to the video stream.
+
           Video filters will be applied to the video streams (after overlays
−
      --sout-mosaic-bridge-alpha=<integer [0 .. 255]>
+
           are applied). You can enter a colon-separated list of filters.
−
                                Transparency
 
−
           Transparency of the mosaic picture.
 
−
      --sout-mosaic-bridge-x=<integer>
 
−
                                X offset
 
−
          X coordinate of the upper left corner in the mosaic if non negative.
 
−
      --sout-mosaic-bridge-y=<integer>
 
−
                                Y offset
 
−
          Y coordinate of the upper left corner in the mosaic if non negative.
 
−
 
 
−
Elementary stream output
 
−
  Generic:
 
−
      --sout-es-access=<string>  Output access method
 
−
          This is the default output access method that will be used.
 
−
      --sout-es-mux=<string>    Output muxer
 
−
          This is the default muxer method that will be used.
 
−
      --sout-es-dst=<string>    Output URL
 
−
          This is the default output URI.
 
 
   Audio:
 
   Audio:
−
       --sout-es-access-audio=<string>
+
       --sout-transcode-aenc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none}
−
                                 Audio output access method
+
                                Audio encoder
−
           This is the output access method that will be used for audio.
+
          This is the audio encoder module that will be used (and its
−
       --sout-es-mux-audio=<string>
+
          associated options).
−
                                 Audio output muxer
+
      --sout-transcode-acodec=<string>  
−
           This is the muxer that will be used for audio.
+
                                 Destination audio codec
−
       --sout-es-dst-audio=<string>
+
           This is the audio codec that will be used.
−
                                 Audio output URL
+
      --sout-transcode-ab=<integer>
−
           This is the output URI that will be used for audio.
+
                                Audio bitrate
−
  Video:
+
          Target bitrate of the transcoded audio stream.
−
       --sout-es-access-video=<string>
+
       --sout-transcode-alang=<string>  
−
                                 Video output access method
+
                                 Audio language
−
           This is the output access method that will be used for video.
+
           This is the language of the audio stream.
−
       --sout-es-mux-video=<string>
+
       --sout-transcode-channels=<integer [0 .. 9]>
−
                                 Video output muxer
+
                                Audio channels
−
           This is the muxer that will be used for video.
+
          Number of audio channels in the transcoded streams.
−
       --sout-es-dst-video=<string>
+
      --sout-transcode-samplerate=<integer [0 .. 48000]>
−
                                 Video output URL
+
                                Audio sample rate
−
           This is the output URI that will be used for video.
+
          Sample rate of the transcoded audio stream (11250, 22500, 44100 or
 +
          48000).
 +
      --sout-transcode-afilter=<string>  
 +
                                 Audio filter
 +
          Audio filters will be applied to the audio streams (after conversion
 +
          filters are applied). You can enter a colon-separated list of
 +
          filters.
 +
  Overlays/Subtitles:
 +
      --sout-transcode-senc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none}
 +
                                Subtitle encoder
 +
           This is the subtitle encoder module that will be used (and its
 +
          associated options).
 +
       --sout-transcode-scodec=<string>  
 +
                                 Destination subtitle codec
 +
           This is the subtitle codec that will be used.
 +
       --sout-transcode-soverlay, --no-sout-transcode-soverlay
 +
                                Destination subtitle codec
 +
                                 (default disabled)
 +
           This is the subtitle codec that will be used.
 +
       --sout-transcode-sfilter=<string>  
 +
                                 Overlays
 +
           This allows you to add overlays (also known as "subpictures") on the
 +
          transcoded video stream. The subpictures produced by the filters will
 +
          be overlayed directly onto the video. You can specify a
 +
          colon-separated list of subpicture modules.
 +
  Miscellaneous:
 +
      --sout-transcode-threads=<integer>
 +
                                Number of threads
 +
          Number of threads used for the transcoding.
 +
      --sout-transcode-pool-size=<integer [1 .. 1000]>
 +
                                Picture pool size
 +
          Defines how many pictures we allow to be in pool between
 +
          decoder/encoder threads when threads > 0
 +
      --sout-transcode-high-priority, --no-sout-transcode-high-priority
 +
                                High priority
 +
                                (default disabled)
 +
          Runs the optional encoder thread at the OUTPUT priority instead of
 +
          VIDEO.
  
−
  Display stream output
+
  Writes statistic info about stream (stats)
−
      --sout-display-audio, --no-sout-display-audio
+
       --sout-stats-output=<string>
−
                                Enable audio (default enabled)
+
                                 Output file
−
          Enable/disable audio rendering. (default enabled)
+
           Writes stats to file instead of stdout
−
       --sout-display-video, --no-sout-display-video
+
       --sout-stats-prefix=<string>  
−
                                 Enable video (default enabled)
+
                                 Prefix to show on output line
−
           Enable/disable video rendering. (default enabled)
+
           Prefix to show on output line
−
       --sout-display-delay=<integer>
 
−
                                 Delay
 
−
           Introduces a delay in the display of the stream.
 
  
−
  Bridge stream output
+
  Standard stream output (stream_out_standard)
−
  Bridge out:
+
      --sout-standard-access=<string>
−
       --sout-bridge-out-id=<integer>
+
                                Output access method
−
                                 ID
+
          Output method to use for the stream.
−
           Integer identifier for this elementary stream. This will be used to
+
       --sout-standard-mux=<string>
−
           "find" this stream later.
+
                                Output muxer
−
       --sout-bridge-out-in-name=<string>
+
          Muxer to use for the stream.
−
                                 Destination bridge-in name
+
      --sout-standard-dst=<string>  
−
           Name of the destination bridge-in. If you do not need more than one
+
                                 Output destination
−
          bridge-in at a time, you can discard this option.
+
           Destination (URL) to use for the stream. Overrides path and bind
−
  Bridge in:
+
          parameters
−
       --sout-bridge-in-delay=<integer>
+
      --sout-standard-bind=<string>
−
                                 Delay
+
                                Address to bind to (helper setting for dst)
−
           Pictures coming from the picture video outputs will be delayed
+
           address:port to bind vlc to listening incoming streams. Helper
−
           according to this value (in milliseconds, should be >= 100 ms). For
+
          setting for dst, dst=bind+'/'+path. dst-parameter overrides this.
−
           high values, you will need to raise caching values.
+
       --sout-standard-path=<string>  
−
       --sout-bridge-in-id-offset=<integer>
+
                                 Filename for stream (helper setting for dst)
−
                                 ID Offset
+
          Filename for stream. Helper setting for dst, dst=bind+'/'+path.
−
           Offset to add to the stream IDs specified in bridge_out to obtain the
+
           dst-parameter overrides this.
−
           stream IDs bridge_in will register.
+
      --sout-standard-sap, --no-sout-standard-sap
−
       --sout-bridge-in-name=<string>
+
                                SAP announcing
−
                                 Name of current instance
+
                                (default disabled)
−
           Name of this bridge-in instance. If you do not need more than one
+
          Announce this session with SAP.
−
           bridge-in at a time, you can discard this option.
+
       --sout-standard-name=<string>  
−
       --sout-bridge-in-placeholder, --no-sout-bridge-in-placeholder
+
                                 Session name
−
                                 Fallback to placeholder stream when out of
+
           This is the name of the session that will be announced in the SDP
−
                                data (default disabled)
+
           (Session Descriptor).
−
           If set to true, the bridge will discard all input elementary streams
+
      --sout-standard-description=<string>
−
           except if it doesn't receive data from another bridge-in. This can be
+
                                Session description
−
           used to configure a place holder stream when the real source breaks.
+
           This allows you to give a short description with details about the
−
           Source and placeholder streams should have the same format. (default
+
          stream, that will be announced in the SDP (Session Descriptor).
−
           disabled)
+
       --sout-standard-url=<string>  
−
       --sout-bridge-in-placeholder-delay=<integer>
+
                                 Session URL
−
                                 Placeholder delay
+
           This allows you to give a URL with more details about the stream
−
           Delay (in ms) before the placeholder kicks in.
+
          (often the website of the streaming organization), that will be
−
       --sout-bridge-in-placeholder-switch-on-iframe, --no-sout-bridge-in-placeholder-switch-on-iframe
+
           announced in the SDP (Session Descriptor).
−
                                 Wait for I frame before toggling placholder
+
       --sout-standard-email=<string>  
 +
                                 Session email
 +
           This allows you to give a contact mail address for the stream, that
 +
           will be announced in the SDP (Session Descriptor).
 +
 
 +
Stream output to memory buffer (smem)
 +
       --sout-smem-video-prerender-callback=<string>
 +
                                Video prerender callback
 +
          Address of the video prerender callback function. This function will
 +
          set the buffer where render will be done.
 +
      --sout-smem-audio-prerender-callback=<string>
 +
                                 Audio prerender callback
 +
          Address of the audio prerender callback function. This function will
 +
           set the buffer where render will be done.
 +
      --sout-smem-video-postrender-callback=<string>
 +
                                Video postrender callback
 +
           Address of the video postrender callback function. This function will
 +
           be called when the render is into the buffer.
 +
      --sout-smem-audio-postrender-callback=<string>
 +
                                Audio postrender callback
 +
           Address of the audio postrender callback function. This function will
 +
           be called when the render is into the buffer.
 +
       --sout-smem-video-data=<string>  
 +
                                 Video Callback data
 +
           Data for the video callback function.
 +
       --sout-smem-audio-data=<string>
 +
                                Audio callback data
 +
          Data for the video callback function.
 +
      --sout-smem-time-sync, --no-sout-smem-time-sync
 +
                                 Time Synchronized output
 
                                 (default enabled)
 
                                 (default enabled)
−
           If enabled, switching between the placeholder and the normal stream
+
           Time Synchronisation option for output. If true, stream will render
−
          will only occur on I frames. This will remove artifacts on stream
+
           as usual, else it will be rendered as fast as possible.
−
           switching at the expense of a slightly longer delay, depending on the
 
−
          frequence of I frames in the streams. (default enabled)
 
  
−
  DVD subtitles decoder
+
  Change the id of an elementary stream (setid)
−
       --dvdsub-transparency, --no-dvdsub-transparency
+
  Set ES id:
−
                                 Disable DVD subtitle transparency (default
+
       --sout-setid-id=<integer>  Elementary Stream ID
−
                                 disabled)
+
          Specify an identifier integer for this elementary stream
−
           Removes all transparency effects used in DVD subtitles. (default
+
      --sout-setid-new-id=<integer>
−
           disabled)
+
                                 New ES ID
 +
          Specify an new identifier integer for this elementary stream
 +
  Set ES Lang:
 +
      --sout-setlang-id=<integer>
 +
                                 Elementary Stream ID
 +
           Specify an identifier integer for this elementary stream
 +
      --sout-setlang-lang=<string>
 +
                                Language
 +
           Specify an ISO-639 code (three characters) for this elementary stream
  
−
  Speex audio decoder
+
  RTP stream output (stream_out_rtp)
−
       --sout-speex-mode={0 (Narrow-band (8kHz)), 1 (Wide-band (16kHz)), 2 (Ultra-wideband (32kHz))}
+
       --sout-rtp-dst=<string>    Destination
−
                                Mode
+
          This is the output URL that will be used.
−
           Enforce the mode of the encoder.
+
      --sout-rtp-sdp=<string>    SDP
−
       --sout-speex-complexity=<integer [1 .. 10]>
+
          This allows you to specify how the SDP (Session Descriptor) for this
−
                                Encoding complexity
+
          RTP session will be made available. You must use a url:
−
           Enforce the complexity of the encoder.
+
           http://location to access the SDP via HTTP, rtsp://location for RTSP
−
       --sout-speex-cbr, --no-sout-speex-cbr
+
          access, and sap:// for the SDP to be announced via SAP.
−
                                 CBR encoding (default disabled)
+
       --sout-rtp-mux=<string>   Muxer
−
           Enforce a constant bitrate encoding (CBR) instead of default variable
+
           This allows you to specify the muxer used for the streaming output.
−
          bitrate encoding (VBR). (default disabled)
+
          Default is to use no muxer (standard RTP stream).
−
       --sout-speex-quality=<float [0.000000 .. 10.000000]>
+
       --sout-rtp-sap, --no-sout-rtp-sap
−
                                Encoding quality
+
                                SAP announcing
−
           Enforce a quality between 0 (low) and 10 (high).
+
                                 (default disabled)
−
       --sout-speex-max-bitrate=<integer>
+
           Announce this session with SAP.
−
                                Maximal bitrate
+
       --sout-rtp-name=<string>   Session name
−
           Enforce the maximal VBR bitrate
+
          This is the name of the session that will be announced in the SDP
−
       --sout-speex-vad, --no-sout-speex-vad
+
           (Session Descriptor).
−
                                 Voice activity detection (default enabled)
+
       --sout-rtp-cat=<string>   Session category
−
           Enable voice activity detection (VAD). It is automatically activated
+
          This allows you to specify a category for the session, that will be
−
           in VBR mode. (default enabled)
+
           announced if you choose to use SAP.
−
       --sout-speex-dtx, --no-sout-speex-dtx
+
       --sout-rtp-description=<string>
−
                                Discontinuous Transmission (default disabled)
+
                                 Session description
−
           Enable discontinuous transmission (DTX). (default disabled)
+
           This allows you to give a short description with details about the
−
 
+
           stream, that will be announced in the SDP (Session Descriptor).
−
Audio Spatializer
+
       --sout-rtp-url=<string>    Session URL
−
       --spatializer-roomsize=<float>
+
          This allows you to give a URL with more details about the stream
−
                                Room size
+
          (often the website of the streaming organization), that will be
−
           Defines the virtual surface of the room emulated by the filter.
+
           announced in the SDP (Session Descriptor).
−
       --spatializer-width=<float>
+
       --sout-rtp-email=<string> Session email
−
                                 Room width
+
          This allows you to give a contact mail address for the stream, that
−
           Width of the virtual room
+
           will be announced in the SDP (Session Descriptor).
−
       --spatializer-wet=<float>  Wet
+
       --sout-rtp-proto={dccp,sctp,tcp,udp,udplite}
−
       --spatializer-dry=<float>  Dry
+
                                 Transport protocol
−
      --spatializer-damp=<float> Damp
+
           This selects which transport protocol to use for RTP.
−
 
+
       --sout-rtp-port=<integer>  Port
−
Skinnable Interface
+
          This allows you to specify the base port for the RTP streaming.
−
       --skins2-last=<string>     Skin to use
+
       --sout-rtp-port-audio=<integer>  
−
           Path to the skin to use.
+
                                Audio port
−
       --skins2-config=<string>  Config of last used skin
+
          This allows you to specify the default audio port for the RTP
−
           Windows configuration of the last skin used. This option is updated
+
          streaming.
−
           automatically, do not touch it.
+
       --sout-rtp-port-video=<integer>  
−
       --skins2-systray, --no-skins2-systray
+
                                Video port
−
                                 Systray icon (default disabled)
+
           This allows you to specify the default video port for the RTP
−
           Show a systray icon for VLC (default disabled)
+
          streaming.
−
       --skins2-taskbar, --no-skins2-taskbar
+
       --sout-rtp-ttl=<integer>  Hop limit (TTL)
−
                                 Show VLC on the taskbar (default enabled)
+
          This is the hop limit (also known as "Time-To-Live" or TTL) of the
−
           Show VLC on the taskbar (default enabled)
+
           multicast packets sent by the stream output (-1 = use operating
−
       --skins2-transparency, --no-skins2-transparency
+
           system built-in default).
−
                                Enable transparency effects (default disabled)
+
       --sout-rtp-rtcp-mux, --no-sout-rtp-rtcp-mux
−
           You can disable all transparency effects if you want. This is mainly
+
                                RTP/RTCP multiplexing
−
           useful when moving windows does not behave correctly. (default
+
                                 (default disabled)
−
          disabled)
+
           This sends and receives RTCP packet multiplexed over the same port as
−
       --skinned-playlist, --no-skinned-playlist
+
          RTP packets.
−
                                Use a skinned playlist (default enabled)
+
       --sout-rtp-caching=<integer>
−
           Use a skinned playlist (default enabled)
+
                                 Caching value (ms)
−
       --skinned-video, --no-skinned-video
+
           Default caching value for outbound RTP streams. This value should be
−
                                 Display video in a skinned window if any
+
          set in milliseconds.
−
                                 (default enabled)
+
       --sout-rtp-key=<string>    SRTP key (hexadecimal)
−
           When set to 'no', this parameter is intended to give old skins a
+
           RTP packets will be integrity-protected and ciphered with this Secure
−
           chance to play back video even though no video tag is implemented
+
          RTP master shared secret key. This must be a 32-character-long
−
           (default enabled)
+
           hexadecimal string.
 +
       --sout-rtp-salt=<string>  SRTP salt (hexadecimal)
 +
           Secure RTP requires a (non-secret) master salt value. This must be a
 +
          28-character-long hexadecimal string.
 +
       --sout-rtp-mp4a-latm, --no-sout-rtp-mp4a-latm
 +
                                 MP4A LATM
 +
                                 (default disabled)
 +
           This allows you to stream MPEG4 LATM audio streams (see RFC3016).
 +
      --rtsp-timeout=<integer>  RTSP session timeout (s)
 +
          RTSP sessions will be closed after not receiving any RTSP request for
 +
          this long. Setting it to a negative value or zero disables timeouts.
 +
           The default is 60 (one minute).
 +
      --sout-rtsp-user=<string>  Username
 +
          Username that will be requested to access the stream.
 +
      --sout-rtsp-pwd=<string>  Password
 +
           Password that will be requested to access the stream.
  
−
  Sharpen video filter
+
  Record stream output (record)
−
Augment contrast between contours.
+
       --sout-record-dst-prefix=<string>  
−
       --sharpen-sigma=<float [0.000000 .. 2.000000]>
+
                                 Destination prefix
−
                                 Sharpen strength (0-2)
+
           Prefix of the destination file automatically generated
−
           Set the Sharpen strength, between 0 and 2. Defaults to 0.05.
 
  
−
  Screen Input
+
  Mosaic bridge stream output (mosaic_bridge)
−
       --screen-caching=<integer> Caching value in ms
+
       --sout-mosaic-bridge-id=<string>  
−
           Caching value for screen capture. This value should be set in
+
                                ID
−
          milliseconds.
+
           Specify an identifier string for this subpicture
−
       --screen-fps=<float>       Frame rate
+
       --sout-mosaic-bridge-width=<integer>  
−
           Desired frame rate for the capture.
+
                                Video width
−
       --screen-top=<integer>     Subscreen top left corner
+
           Output video width.
−
           Top coordinate of the subscreen top left corner.
+
       --sout-mosaic-bridge-height=<integer>  
−
       --screen-left=<integer>   Subscreen top left corner
+
                                Video height
−
           Left coordinate of the subscreen top left corner.
+
           Output video height.
−
       --screen-width=<integer>   Subscreen width
+
       --sout-mosaic-bridge-sar=<string>  
−
           Subscreen width
+
                                Sample aspect ratio
−
       --screen-height=<integer> Subscreen height
+
           Sample aspect ratio of the destination (1:1, 3:4, 2:3).
−
           Subscreen height
+
       --sout-mosaic-bridge-chroma=<string>  
−
       --screen-follow-mouse, --no-screen-follow-mouse
+
                                Image chroma
−
                                 Follow the mouse (default disabled)
+
          Force the use of a specific chroma. Use YUVA if you're planning to
−
           Follow the mouse when capturing a subscreen. (default disabled)
+
           use the Alphamask or Bluescreen video filter.
−
       --screen-mouse-image=<string>
+
       --sout-mosaic-bridge-vfilter=<string>  
−
                                 Mouse pointer image
+
                                Video filter
−
           If specified, will use the image to draw the mouse pointer on the
+
           Video filters will be applied to the video stream.
−
          capture.
+
       --sout-mosaic-bridge-alpha=<integer [0 .. 255]>
−
       --screen-fragment-size=<integer>
+
                                 Transparency
−
                                 Capture fragment size
+
           Transparency of the mosaic picture.
−
           Optimize the capture by fragmenting the screen in chunks of
+
       --sout-mosaic-bridge-x=<integer>  
−
          predefined height (16 might be a good value, and 0 means disabled).
+
                                 X offset
 +
           X coordinate of the upper left corner in the mosaic if non negative.
 +
       --sout-mosaic-bridge-y=<integer>  
 +
                                 Y offset
 +
           Y coordinate of the upper left corner in the mosaic if non negative.
  
−
  Schroedinger video decoder
+
  Elementary stream output (es)
−
      --sout-schro-rate_control={constant_noise_threshold,constant_bitrate,low_delay,lossless,constant_lambda,constant_error,constant_quality}
+
  Generic:
−
                                rate_control
+
       --sout-es-access=<string> Output access method
−
          rate_control
+
           This is the default output access method that will be used.
−
      --sout-schro-bitrate=<integer [0 .. 2147483647]>
+
       --sout-es-mux=<string>     Output muxer
−
                                bitrate
+
           This is the default muxer method that will be used.
−
          bitrate
+
       --sout-es-dst=<string>     Output URL
−
      --sout-schro-max_bitrate=<integer [0 .. 2147483647]>
+
           This is the default output URI.
−
                                max_bitrate
+
  Audio:
−
          max_bitrate
+
       --sout-es-access-audio=<string>  
−
      --sout-schro-min_bitrate=<integer [0 .. 2147483647]>
+
                                 Audio output access method
−
                                min_bitrate
+
           This is the output access method that will be used for audio.
−
          min_bitrate
+
       --sout-es-mux-audio=<string>  
−
      --sout-schro-buffer_size=<integer [0 .. 2147483647]>
+
                                 Audio output muxer
−
                                buffer_size
+
           This is the muxer that will be used for audio.
−
          buffer_size
+
       --sout-es-dst-audio=<string>  
−
      --sout-schro-buffer_level=<integer [0 .. 2147483647]>
+
                                 Audio output URL
−
                                buffer_level
+
           This is the output URI that will be used for audio.
−
          buffer_level
+
  Video:
−
      --sout-schro-quality=<float [0.000000 .. 10.000000]>
+
       --sout-es-access-video=<string>  
−
                                quality
+
                                 Video output access method
−
          quality
+
           This is the output access method that will be used for video.
−
      --sout-schro-noise_threshold=<float [0.000000 .. 100.000000]>
+
       --sout-es-mux-video=<string>  
−
                                noise_threshold
+
                                Video output muxer
−
          noise_threshold
+
           This is the muxer that will be used for video.
−
      --sout-schro-gop_structure={adaptive,intra_only,backref,chained_backref,biref,chained_biref}
+
       --sout-es-dst-video=<string>  
−
                                gop_structure
+
                                Video output URL
−
          gop_structure
+
           This is the output URI that will be used for video.
−
      --sout-schro-queue_depth=<integer [1 .. 40]>
 
−
                                queue_depth
 
−
          queue_depth
 
−
      --sout-schro-perceptual_weighting={none,ccir959,moo,manos_sakrison}
 
−
                                perceptual_weighting
 
−
          perceptual_weighting
 
−
      --sout-schro-perceptual_distance=<float [0.000000 .. 100.000000]>
 
−
                                perceptual_distance
 
−
          perceptual_distance
 
−
      --sout-schro-filtering={none,center_weighted_median,gaussian,add_noise,adaptive_gaussian,lowpass}
 
−
                                filtering
 
−
          filtering
 
−
      --sout-schro-filter_value=<float [0.000000 .. 100.000000]>
 
−
                                filter_value
 
−
          filter_value
 
−
      --sout-schro-profile=<integer>
 
−
                                profile
 
−
          profile
 
−
      --sout-schro-force_profile={auto,vc2_low_delay,vc2_simple,vc2_main,main}
 
−
                                force_profile
 
−
          force_profile
 
−
      --sout-schro-level=<integer>
 
−
                                level
 
−
          level
 
−
      --sout-schro-max_refs=<integer [1 .. 4]>
 
−
                                max_refs
 
−
          max_refs
 
−
      --sout-schro-open_gop, --no-sout-schro-open_gop
 
−
                                open_gop (default enabled)
 
−
          open_gop (default enabled)
 
−
       --sout-schro-au_distance=<integer [1 .. 2147483647]>
 
−
                                au_distance
 
−
           au_distance
 
−
      --sout-schro-enable_psnr, --no-sout-schro-enable_psnr
 
−
                                enable_psnr (default disabled)
 
−
          enable_psnr (default disabled)
 
−
      --sout-schro-enable_ssim, --no-sout-schro-enable_ssim
 
−
                                enable_ssim (default disabled)
 
−
          enable_ssim (default disabled)
 
−
      --sout-schro-transform_depth=<integer [0 .. 6]>
 
−
                                transform_depth
 
−
          transform_depth
 
−
      --sout-schro-intra_wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7}
 
−
                                intra_wavelet
 
−
          intra_wavelet
 
−
      --sout-schro-inter_wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7}
 
−
                                inter_wavelet
 
−
          inter_wavelet
 
−
       --sout-schro-mv_precision=<integer [0 .. 3]>
 
−
                                mv_precision
 
−
           mv_precision
 
−
      --sout-schro-downsample_levels=<integer [2 .. 8]>
 
−
                                downsample_levels
 
−
          downsample_levels
 
−
      --sout-schro-motion_block_size={automatic,small,medium,large}
 
−
                                motion_block_size
 
−
          motion_block_size
 
−
      --sout-schro-motion_block_overlap={automatic,none,partial,full}
 
−
                                motion_block_overlap
 
−
          motion_block_overlap
 
−
      --sout-schro-interlaced_coding, --no-sout-schro-interlaced_coding
 
−
                                interlaced_coding (default disabled)
 
−
          interlaced_coding (default disabled)
 
−
      --sout-schro-enable_internal_testing, --no-sout-schro-enable_internal_testing
 
−
                                enable_internal_testing (default disabled)
 
−
          enable_internal_testing (default disabled)
 
−
      --sout-schro-enable_noarith, --no-sout-schro-enable_noarith
 
−
                                enable_noarith (default disabled)
 
−
          enable_noarith (default disabled)
 
−
      --sout-schro-enable_md5, --no-sout-schro-enable_md5
 
−
                                enable_md5 (default disabled)
 
−
          enable_md5 (default disabled)
 
−
      --sout-schro-enable_fullscan_estimation, --no-sout-schro-enable_fullscan_estimation
 
−
                                enable_fullscan_estimation (default disabled)
 
−
          enable_fullscan_estimation (default disabled)
 
−
      --sout-schro-enable_hierarchical_estimation, --no-sout-schro-enable_hierarchical_estimation
 
−
                                enable_hierarchical_estimation (default
 
−
                                enabled)
 
−
          enable_hierarchical_estimation (default enabled)
 
−
      --sout-schro-enable_zero_estimation, --no-sout-schro-enable_zero_estimation
 
−
                                enable_zero_estimation (default disabled)
 
−
          enable_zero_estimation (default disabled)
 
−
      --sout-schro-enable_phasecorr_estimation, --no-sout-schro-enable_phasecorr_estimation
 
−
                                enable_phasecorr_estimation (default disabled)
 
−
          enable_phasecorr_estimation (default disabled)
 
−
      --sout-schro-enable_bigblock_estimation, --no-sout-schro-enable_bigblock_estimation
 
−
                                enable_bigblock_estimation (default enabled)
 
−
          enable_bigblock_estimation (default enabled)
 
−
      --sout-schro-enable_multiquant, --no-sout-schro-enable_multiquant
 
−
                                enable_multiquant (default disabled)
 
−
          enable_multiquant (default disabled)
 
−
      --sout-schro-enable_dc_multiquant, --no-sout-schro-enable_dc_multiquant
 
−
                                enable_dc_multiquant (default disabled)
 
−
          enable_dc_multiquant (default disabled)
 
−
      --sout-schro-enable_global_motion, --no-sout-schro-enable_global_motion
 
−
                                enable_global_motion (default disabled)
 
−
          enable_global_motion (default disabled)
 
−
      --sout-schro-enable_scene_change_detection, --no-sout-schro-enable_scene_change_detection
 
−
                                enable_scene_change_detection (default
 
−
                                enabled)
 
−
          enable_scene_change_detection (default enabled)
 
−
      --sout-schro-enable_deep_estimation, --no-sout-schro-enable_deep_estimation
 
−
                                enable_deep_estimation (default enabled)
 
−
          enable_deep_estimation (default enabled)
 
−
      --sout-schro-enable_rdo_cbr, --no-sout-schro-enable_rdo_cbr
 
−
                                enable_rdo_cbr (default enabled)
 
−
          enable_rdo_cbr (default enabled)
 
−
      --sout-schro-enable_chroma_me, --no-sout-schro-enable_chroma_me
 
−
                                enable_chroma_me (default disabled)
 
−
          enable_chroma_me (default disabled)
 
−
      --sout-schro-horiz_slices=<integer [0 .. 2147483647]>
 
−
                                horiz_slices
 
−
          horiz_slices
 
−
       --sout-schro-vert_slices=<integer [0 .. 2147483647]>
 
−
                                vert_slices
 
−
           vert_slices
 
−
      --sout-schro-codeblock_size={automatic,small,medium,large,full}
 
−
                                codeblock_size
 
−
          codeblock_size
 
−
      --sout-schro-magic_dc_metric_offset=<float [0.000000 .. 1000.000000]>
 
−
                                magic_dc_metric_offset
 
−
          magic_dc_metric_offset
 
−
      --sout-schro-magic_subband0_lambda_scale=<float [0.000000 .. 1000.000000]>
 
−
                                magic_subband0_lambda_scale
 
−
          magic_subband0_lambda_scale
 
−
       --sout-schro-magic_chroma_lambda_scale=<float [0.000000 .. 1000.000000]>
 
−
                                magic_chroma_lambda_scale
 
−
          magic_chroma_lambda_scale
 
−
      --sout-schro-magic_nonref_lambda_scale=<float [0.000000 .. 1000.000000]>
 
−
                                 magic_nonref_lambda_scale
 
−
           magic_nonref_lambda_scale
 
−
      --sout-schro-magic_me_lambda_scale=<float [0.000000 .. 100.000000]>
 
−
                                magic_me_lambda_scale
 
−
          magic_me_lambda_scale
 
−
       --sout-schro-magic_I_lambda_scale=<float [0.000000 .. 100.000000]>
 
−
                                magic_I_lambda_scale
 
−
          magic_I_lambda_scale
 
−
      --sout-schro-magic_P_lambda_scale=<float [0.000000 .. 10.000000]>
 
−
                                 magic_P_lambda_scale
 
−
           magic_P_lambda_scale
 
−
      --sout-schro-magic_B_lambda_scale=<float [0.000000 .. 10.000000]>
 
−
                                magic_B_lambda_scale
 
−
          magic_B_lambda_scale
 
−
       --sout-schro-magic_allocation_scale=<float [0.000000 .. 1000.000000]>
 
−
                                magic_allocation_scale
 
−
          magic_allocation_scale
 
−
      --sout-schro-magic_inter_cpd_scale=<float [0.000000 .. 1.000000]>
 
−
                                 magic_inter_cpd_scale
 
−
           magic_inter_cpd_scale
 
−
      --sout-schro-magic_keyframe_weight=<float [0.000000 .. 1000.000000]>
 
−
                                magic_keyframe_weight
 
−
          magic_keyframe_weight
 
−
       --sout-schro-magic_scene_change_threshold=<float [0.000000 .. 1000.000000]>
 
−
                                magic_scene_change_threshold
 
−
          magic_scene_change_threshold
 
−
      --sout-schro-magic_inter_p_weight=<float [0.000000 .. 1000.000000]>
 
−
                                 magic_inter_p_weight
 
−
           magic_inter_p_weight
 
−
      --sout-schro-magic_inter_b_weight=<float [0.000000 .. 1000.000000]>
 
−
                                magic_inter_b_weight
 
−
          magic_inter_b_weight
 
−
      --sout-schro-magic_me_bailout_limit=<float [0.000000 .. 1000.000000]>
 
−
                                magic_me_bailout_limit
 
−
          magic_me_bailout_limit
 
−
      --sout-schro-magic_bailout_weight=<float [0.000000 .. 1000.000000]>
 
−
                                magic_bailout_weight
 
−
          magic_bailout_weight
 
−
      --sout-schro-magic_error_power=<float [0.000000 .. 1000.000000]>
 
−
                                magic_error_power
 
−
          magic_error_power
 
−
      --sout-schro-magic_subgroup_length=<float [1.000000 .. 10.000000]>
 
−
                                magic_subgroup_length
 
−
          magic_subgroup_length
 
−
      --sout-schro-magic_badblock_multiplier_nonref=<float [0.000000 .. 1000.000000]>
 
−
                                magic_badblock_multiplier_nonref
 
−
          magic_badblock_multiplier_nonref
 
−
      --sout-schro-magic_badblock_multiplier_ref=<float [0.000000 .. 1000.000000]>
 
−
                                magic_badblock_multiplier_ref
 
−
          magic_badblock_multiplier_ref
 
−
      --sout-schro-magic_block_search_threshold=<float [0.000000 .. 1000.000000]>
 
−
                                magic_block_search_threshold
 
−
          magic_block_search_threshold
 
−
      --sout-schro-magic_scan_distance=<float [0.000000 .. 1000.000000]>
 
−
                                magic_scan_distance
 
−
          magic_scan_distance
 
−
      --sout-schro-magic_diagonal_lambda_scale=<float [0.000000 .. 1000.000000]>
 
−
                                magic_diagonal_lambda_scale
 
−
          magic_diagonal_lambda_scale
 
−
      --sout-schro-chroma_fmt={420,422,444}
 
−
                                Chroma format
 
−
          Picking chroma format will force a conversion of the video into that
 
−
          format
 
−
       --sout-schro-auto_coding_mode, --no-sout-schro-auto_coding_mode
 
−
                                Automate picture coding mode (default enabled)
 
−
          Use the input picture to determine how to code it - interlaced or
 
−
          progressive (default enabled)
 
−
 
 
−
Scene video filter
 
−
Send your video to picture files
 
−
      --scene-format=<string>   Image format
 
−
          Format of the output images (png, jpeg, ...).
 
−
      --scene-width=<integer>    Image width
 
−
           You can enforce the image width. By default (-1) VLC will adapt to
 
−
          the video characteristics.
 
−
       --scene-height=<integer>  Image height
 
−
          You can enforce the image height. By default (-1) VLC will adapt to
 
−
          the video characteristics.
 
−
      --scene-prefix=<string>   Filename prefix
 
−
          Prefix of the output images filenames. Output filenames will have the
 
−
           "prefixNUMBER.format" form if replace is not true.
 
−
      --scene-path=<string>      Directory path prefix
 
−
          Directory path where images files should be saved.If not set, then
 
−
          images will be automatically saved in users homedir.
 
−
      --scene-replace, --no-scene-replace
 
−
                                Always write to the same file (default
 
−
                                disabled)
 
−
          Always write to the same file instead of creating one file per image.
 
−
          In this case, the number is not appended to the filename. (default
 
−
          disabled)
 
−
      --scene-ratio=<integer>    Recording ratio
 
−
          Ratio of images to record. 3 means that one image out of three is
 
−
          recorded.
 
  
−
  Audio tempo scaler synched with rate
+
  Display stream output (display)
−
       --scaletempo-stride=<integer [1 .. 2000]>
+
      --sout-display-audio, --no-sout-display-audio
−
                                 Stride Length
+
                                Enable audio
−
           Length in milliseconds to output each stride
+
                                (default enabled)
−
       --scaletempo-overlap=<float [0.000000 .. 1.000000]>
+
          Enable/disable audio rendering.
−
                                 Overlap Length
+
      --sout-display-video, --no-sout-display-video
−
           Percentage of stride to overlap
+
                                Enable video
−
       --scaletempo-search=<integer [0 .. 200]>
+
                                (default enabled)
−
                                 Search Length
+
          Enable/disable video rendering.
−
           Length in milliseconds to search for best overlap position
+
       --sout-display-delay=<integer>
 +
                                Delay (ms)
 +
          Introduces a delay in the display of the stream.
 +
 
 +
Delay a stream (delay)
 +
      --sout-delay-id=<integer>  Elementary Stream ID
 +
          Specify an identifier integer for this elementary stream
 +
      --sout-delay-delay=<integer>  
 +
                                 Delay of the ES (ms)
 +
           Specify a delay (in ms) for this elementary stream. Positive means
 +
          delay and negative means advance.
 +
 
 +
Chromecast stream output (stream_out_chromecast)
 +
       --sout-chromecast-ip=<string>
 +
                               
 +
      --sout-chromecast-port=<integer>
 +
                               
 +
      --sout-chromecast-video, --no-sout-chromecast-video
 +
                               
 +
                                (default enabled)
 +
      --sout-chromecast-http-port=<integer>  
 +
                                 HTTP port
 +
           This sets the HTTP port of the local server used to stream the media
 +
          to the Chromecast.
 +
       --sout-chromecast-show-perf-warning=<integer>
 +
                                Performance warning
 +
          Display a performance warning when transcoding
 +
      --sout-chromecast-audio-passthrough, --no-sout-chromecast-audio-passthrough
 +
                                Enable Audio passthrough
 +
                                (default disabled)
 +
          Disable if your receiver does not support Dolby®.
 +
      --sout-chromecast-conversion-quality={0 (High (high quality and high bandwidth)), 1 (Medium (medium quality and medium bandwidth)), 2 (Low (low quality and low bandwidth)), 3 (Low CPU (low quality but high bandwidth))}
 +
                                 Conversion quality
 +
           Change this option to increase conversion speed or quality.
  
−
  Network streams (SAP)
+
  Chromaprint stream output (stream_out_chromaprint)
−
       --sap-addr=<string>        SAP multicast address
+
       --duration=<integer>      Duration of the fingerprinting
−
          The SAP module normally chooses itself the right addresses to listen
+
           Default: 90sec
−
          to. However, you can specify a specific address.
 
−
      --sap-ipv4, --no-sap-ipv4  IPv4 SAP (default enabled)
 
−
          Listen to IPv4 announcements on the standard addresses. (default
 
−
          enabled)
 
−
      --sap-ipv6, --no-sap-ipv6  IPv6 SAP (default enabled)
 
−
          Listen to IPv6 announcements on the standard addresses. (default
 
−
          enabled)
 
−
      --sap-timeout=<integer>   SAP timeout (seconds)
 
−
          Delay after which SAP items get deleted if no new announcement is
 
−
          received.
 
−
       --sap-parse, --no-sap-parse
 
−
                                Try to parse the announce (default enabled)
 
−
          This enables actual parsing of the announces by the SAP module.
 
−
           Otherwise, all announcements are parsed by the "live555" (RTP/RTSP)
 
−
          module. (default enabled)
 
−
      --sap-strict, --no-sap-strict
 
−
                                SAP Strict mode (default disabled)
 
−
          When this is set, the SAP parser will discard some non-compliant
 
−
          announcements. (default disabled)
 
  
−
  Real-Time Protocol (RTP) input
+
  Bridge stream output (bridge)
−
       --rtp-caching=<integer [0 .. 65535]>
+
  Bridge out:
−
                                 RTP de-jitter buffer length (msec)
+
       --sout-bridge-out-id=<integer>  
−
           How long to wait for late RTP packets (and delay the performance).
+
                                 ID
−
       --rtcp-port=<integer [0 .. 65535]>
+
           Integer identifier for this elementary stream. This will be used to
−
                                 RTCP (local) port
+
          "find" this stream later.
−
           RTCP packets will be received on this transport protocol port. If
+
       --sout-bridge-out-in-name=<string>  
−
           zero, multiplexed RTP/RTCP is used.
+
                                 Destination bridge-in name
−
       --srtp-key=<string>       SRTP key (hexadecimal)
+
           Name of the destination bridge-in. If you do not need more than one
−
           RTP packets will be authenticated and deciphered with this Secure RTP
+
           bridge-in at a time, you can discard this option.
−
           master shared secret key.
+
  Bridge in:
−
       --srtp-salt=<string>       SRTP salt (hexadecimal)
+
       --sout-bridge-in-delay=<integer>  
−
           Secure RTP requires a (non-secret) master salt value.
+
                                Delay
−
       --rtp-max-src=<integer [1 .. 255]>
+
           Pictures coming from the picture video outputs will be delayed
−
                                 Maximum RTP sources
+
          according to this value (in milliseconds, should be >= 100 ms). For
−
           How many distinct active RTP sources are allowed at a time.
+
           high values, you will need to raise caching values.
−
       --rtp-timeout=<integer>    RTP source timeout (sec)
+
       --sout-bridge-in-id-offset=<integer>  
−
           How long to wait for any packet before a source is expired.
+
                                ID Offset
−
       --rtp-max-dropout=<integer [0 .. 32767]>
+
          Offset to add to the stream IDs specified in bridge_out to obtain the
−
                                 Maximum RTP sequence number dropout
+
           stream IDs bridge_in will register.
−
           RTP packets will be discarded if they are too much ahead (i.e. in the
+
       --sout-bridge-in-name=<string>  
−
          future) by this many packets from the last received packet.
+
                                 Name of current instance
−
       --rtp-max-misorder=<integer [0 .. 32767]>
+
           Name of this bridge-in instance. If you do not need more than one
−
                                 Maximum RTP sequence number misordering
+
          bridge-in at a time, you can discard this option.
−
           RTP packets will be discarded if they are too far behind (i.e. in the
+
       --sout-bridge-in-placeholder, --no-sout-bridge-in-placeholder
−
           past) by this many packets from the last received packet.
+
                                Fallback to placeholder stream when out of
 +
                                data
 +
                                (default disabled)
 +
           If set to true, the bridge will discard all input elementary streams
 +
          except if it doesn't receive data from another bridge-in. This can be
 +
          used to configure a place holder stream when the real source breaks.
 +
          Source and placeholder streams should have the same format.
 +
       --sout-bridge-in-placeholder-delay=<integer>  
 +
                                 Placeholder delay
 +
           Delay (in ms) before the placeholder kicks in.
 +
       --sout-bridge-in-placeholder-switch-on-iframe, --no-sout-bridge-in-placeholder-switch-on-iframe
 +
                                Wait for I frame before toggling placeholder
 +
                                 (default enabled)
 +
          If enabled, switching between the placeholder and the normal stream
 +
           will only occur on I frames. This will remove artifacts on stream
 +
          switching at the expense of a slightly longer delay, depending on the
 +
           frequence of I frames in the streams.
  
−
  RSS and Atom feed display
+
Stream prefetch filter (prefetch)
 +
      --prefetch-buffer-size=<integer [4 .. 1048576]>
 +
                                Buffer size
 +
          Prefetch buffer size (KiB)
 +
      --prefetch-read-size=<integer [1 .. 536870912]>
 +
                                Read size
 +
          Prefetch background read size (bytes)
 +
      --prefetch-seek-threshold=<integer [0 .. 1152921504606846976]>
 +
                                Seek threshold
 +
          Prefetch forward seek threshold (bytes)
 +
 
 +
Subtitle delay (subsdelay)
 +
Change subtitle delay
 +
      --subsdelay-mode={0 (Absolute delay), 1 (Relative to source delay), 2 (Relative to source content)}
 +
                                Delay calculation mode
 +
          Absolute delay - add absolute delay to each subtitle. Relative to
 +
          source delay - multiply subtitle delay. Relative to source content -
 +
          determine subtitle delay from its content (text).
 +
      --subsdelay-factor=<float [0.000000 .. 20.000000]>
 +
                                Calculation factor
 +
          Calculation factor. In Absolute delay mode the factor represents
 +
          seconds.
 +
      --subsdelay-overlap=<integer [1 .. 4]>
 +
                                Maximum overlapping subtitles
 +
          Maximum number of subtitles allowed at the same time.
 +
      --subsdelay-min-alpha=<integer [0 .. 255]>
 +
                                Minimum alpha value
 +
          Alpha value of the earliest subtitle, where 0 is fully transparent
 +
          and 255 is fully opaque.
 +
  Overlap fix:
 +
      --subsdelay-min-stops=<integer>
 +
                                Interval between two disappearances
 +
          Minimum time (in milliseconds) that subtitle should stay after its
 +
          predecessor has disappeared (subtitle delay will be extended to meet
 +
          this requirement).
 +
      --subsdelay-min-start-stop=<integer>
 +
                                Interval between appearance and disappearance
 +
          Minimum time (in milliseconds) that subtitle should stay after newer
 +
          subtitle has appeared (earlier subtitle delay will be shortened to
 +
          avoid the overlap).
 +
      --subsdelay-min-stop-start=<integer>
 +
                                Interval between disappearance and appearance
 +
          Minimum time (in milliseconds) between subtitle disappearance and
 +
          newer subtitle appearance (earlier subtitle delay will be extended to
 +
          fill the gap).
 +
 
 +
  RSS and Atom feed display (rss)
 
  Display a RSS or ATOM Feed on your video
 
  Display a RSS or ATOM Feed on your video
 
       --rss-urls=<string>        Feed URLs
 
       --rss-urls=<string>        Feed URLs
Line 1,461: Line 1,367:
 
       --rss-y=<integer>          Y offset
 
       --rss-y=<integer>          Y offset
 
           Y offset, down from the top.
 
           Y offset, down from the top.
−
       --rss-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
       --rss-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}  
 
                                 Text position
 
                                 Text position
 
           You can enforce the text position on the video (0=center, 1=left,
 
           You can enforce the text position on the video (0=center, 1=left,
Line 1,467: Line 1,373:
 
           values, eg 6 = top-right).
 
           values, eg 6 = top-right).
 
   Font:
 
   Font:
−
       --rss-opacity=<integer [0 .. 255]>
+
       --rss-opacity=<integer [0 .. 255]>  
 
                                 Opacity
 
                                 Opacity
 
           Opacity (inverse of transparency) of overlay text. 0 = transparent,
 
           Opacity (inverse of transparency) of overlay text. 0 = transparent,
 
           255 = totally opaque.
 
           255 = totally opaque.
−
       --rss-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
+
       --rss-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}  
 
                                 Color
 
                                 Color
 
           Color of the text that will be rendered on the video. This must be an
 
           Color of the text that will be rendered on the video. This must be an
Line 1,477: Line 1,383:
 
           green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
 
           green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
 
           #FFFF00 = yellow (red + green), #FFFFFF = white
 
           #FFFF00 = yellow (red + green), #FFFFFF = white
−
       --rss-size=<integer>       Font size, pixels
+
       --rss-size=<integer [0 .. 4096]>  
−
           Font size, in pixels. Default is -1 (use default font size).
+
                                Font size, pixels
 +
           Font size, in pixels. Default is 0 (use default font size).
 
   Misc:
 
   Misc:
 
       --rss-speed=<integer>      Speed of feeds
 
       --rss-speed=<integer>      Speed of feeds
Line 1,487: Line 1,394:
 
           Number of seconds between each forced refresh of the feeds. 0 means
 
           Number of seconds between each forced refresh of the feeds. 0 means
 
           that the feeds are never updated.
 
           that the feeds are never updated.
−
       --rss-images, --no-rss-images
+
       --rss-images, --no-rss-images  
−
                                 Feed images (default enabled)
+
                                 Feed images
−
           Display feed images if available. (default enabled)
+
                                (default enabled)
−
       --rss-title={-1 (Default), 0 (Don't show), 1 (Always visible), 2 (Scroll with feed)}
+
           Display feed images if available.
 +
       --rss-title={-1 (Default), 0 (Don't show), 1 (Always visible), 2 (Scroll with feed)}  
 
                                 Title display mode
 
                                 Title display mode
 
           Title display mode. Default is 0 (hidden) if the feed has an image
 
           Title display mode. Default is 0 (hidden) if the feed has an image
 
           and feed images are enabled, 1 otherwise.
 
           and feed images are enabled, 1 otherwise.
  
−
Rotate video filter
+
  Remote-OSD over VNC (remoteosd)
−
      --rotate-angle=<integer [0 .. 359]>
 
−
                                Angle in degrees
 
−
          Angle in degrees (0 to 359)
 
−
 
 
−
  Remote-OSD over VNC
 
 
       --rmtosd-host=<string>    VNC Host
 
       --rmtosd-host=<string>    VNC Host
 
           VNC hostname or IP address.
 
           VNC hostname or IP address.
−
       --rmtosd-port=<integer [1 .. 65535]>
+
       --rmtosd-port=<integer [1 .. 65535]>  
 
                                 VNC Port
 
                                 VNC Port
−
           VNC portnumber.
+
           VNC port number.
 
       --rmtosd-password=<string> VNC Password
 
       --rmtosd-password=<string> VNC Password
 
           VNC password.
 
           VNC password.
−
       --rmtosd-update=<integer [200 .. 300]>
+
       --rmtosd-update=<integer [200 .. 300]>  
 
                                 VNC poll interval
 
                                 VNC poll interval
 
           In this interval an update from VNC is requested, default every 300
 
           In this interval an update from VNC is requested, default every 300
−
           ms.  
+
           ms.
−
       --rmtosd-vnc-polling, --no-rmtosd-vnc-polling
+
       --rmtosd-vnc-polling, --no-rmtosd-vnc-polling  
−
                                 VNC polling (default disabled)
+
                                 VNC polling
 +
                                (default disabled)
 
           Activate VNC polling. Do NOT activate for use as VDR ffnetdev client.
 
           Activate VNC polling. Do NOT activate for use as VDR ffnetdev client.
−
          (default disabled)
+
       --rmtosd-mouse-events, --no-rmtosd-mouse-events  
−
       --rmtosd-mouse-events, --no-rmtosd-mouse-events
+
                                 Mouse events
−
                                 Mouse events (default disabled)
+
                                (default disabled)
 
           Send mouse events to VNC host. Not needed for use as VDR ffnetdev
 
           Send mouse events to VNC host. Not needed for use as VDR ffnetdev
−
           client. (default disabled)
+
           client.
−
       --rmtosd-key-events, --no-rmtosd-key-events
+
       --rmtosd-key-events, --no-rmtosd-key-events  
−
                                 Key events (default disabled)
+
                                 Key events
−
           Send key events to VNC host. (default disabled)
+
                                (default disabled)
−
       --rmtosd-alpha=<integer [0 .. 255]>
+
           Send key events to VNC host.
 +
       --rmtosd-alpha=<integer [0 .. 255]>  
 
                                 Alpha transparency value (default 255)
 
                                 Alpha transparency value (default 255)
 
           The transparency of the OSD VNC can be changed by giving a value
 
           The transparency of the OSD VNC can be changed by giving a value
Line 1,530: Line 1,435:
 
           255) the minimum is fully transparent (value 0).
 
           255) the minimum is fully transparent (value 0).
  
−
  Raw video demuxer
+
  Mosaic video sub source (mosaic)
−
       --rawvid-fps=<string>     Frames per Second
+
       --mosaic-alpha=<integer [0 .. 255]>  
−
           This is the desired frame rate when playing raw video streams. In
+
                                Transparency
−
           the form 30000/1001 or 29.97
+
           Transparency of the mosaic foreground pictures. 0 means transparent,
−
       --rawvid-width=<integer>   Width
+
           255 opaque (default).
−
           This specifies the width in pixels of the raw video stream.
+
       --mosaic-height=<integer> Height
−
       --rawvid-height=<integer> Height
+
           Total height of the mosaic, in pixels.
−
           This specifies the height in pixels of the raw video stream.
+
       --mosaic-width=<integer>   Width
−
       --rawvid-chroma=<string>  Force chroma (Use carefully)
+
           Total width of the mosaic, in pixels.
−
          Force chroma. This is a four character string.
+
       --mosaic-align={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
−
      --rawvid-aspect-ratio=<string>
+
                                 Mosaic alignment
−
                                 Aspect ratio
+
           You can enforce the mosaic alignment on the video (0=center, 1=left,
−
           Aspect ratio (4:3, 16:9). Default assumes square pixels.
+
          2=right, 4=top, 8=bottom, you can also use combinations of these
−
 
+
          values, eg 6 = top-right).
−
DV (Digital Video) demuxer
+
       --mosaic-xoffset=<integer> Top left corner X coordinate
−
       --rawdv-hurry-up, --no-rawdv-hurry-up
+
          X Coordinate of the top-left corner of the mosaic.
−
                                Hurry up (default disabled)
+
      --mosaic-yoffset=<integer> Top left corner Y coordinate
−
           The demuxer will advance timestamps if the input can't keep up with
+
           Y Coordinate of the top-left corner of the mosaic.
−
          the rate. (default disabled)
+
       --mosaic-borderw=<integer> Border width
−
 
+
           Width in pixels of the border between miniatures.
−
Raw audio demuxer
+
       --mosaic-borderh=<integer> Border height
−
       --rawaud-channels=<integer>
+
          Height in pixels of the border between miniatures.
−
                                Audio channels
+
      --mosaic-position={0 (auto), 1 (fixed), 2 (offsets)}
−
           Audio channels in input stream. Numeric value >0. Default is 2.
+
                                Positioning method
−
       --rawaud-samplerate=<integer>
+
          Positioning method for the mosaic. auto: automatically choose the
−
                                Audio samplerate (Hz)
+
           best number of rows and columns. fixed: use the user-defined number
−
           Audio sample rate in Hertz. Default is 48000 Hz.
+
          of rows and columns. offsets: use the user-defined offsets for each
−
       --rawaud-fourcc=<string>   FOURCC code of raw input format
+
          image.
−
           FOURCC code of the raw input format. This is a four character string.
+
       --mosaic-rows=<integer>   Number of rows
−
       --rawaud-lang=<string>     Forces the audio language
+
           Number of image rows in the mosaic (only used if positioning method
−
           Forces the audio language for the output mux. Three letter ISO639
+
          is set to "fixed").
−
           code. Default is 'eng'.  
+
       --mosaic-cols=<integer>   Number of columns
−
 
+
           Number of image columns in the mosaic (only used if positioning
−
Qt interface
+
           method is set to "fixed").
−
       --qt-minimal-view, --no-qt-minimal-view
+
      --mosaic-keep-aspect-ratio, --no-mosaic-keep-aspect-ratio
−
                                 Start in minimal view (without menus)
+
                                Keep aspect ratio
 +
                                (default disabled)
 +
          Keep the original aspect ratio when resizing mosaic elements.
 +
       --mosaic-keep-picture, --no-mosaic-keep-picture
 +
                                 Keep original size
 
                                 (default disabled)
 
                                 (default disabled)
−
           Start in minimal view (without menus) (default disabled)
+
           Keep the original size of mosaic elements.
−
       --qt-notification, --no-qt-notification
+
       --mosaic-order=<string>    Elements order
−
                                Show notification popup on track change
+
          You can enforce the order of the elements on the mosaic. You must
−
                                (default enabled)
+
          give a comma-separated list of picture ID(s). These IDs are assigned
−
           Show a notification popup with the artist and track name when the
+
           in the "mosaic-bridge" module.
−
          current playlist item changes, when VLC is minimized or hidden.
+
       --mosaic-offsets=<string> Offsets in order
−
          (default enabled)
+
           You can enforce the (x,y) offsets of the elements on the mosaic (only
−
       --qt-opacity=<float [0.100000 .. 1.000000]>
+
           used if positioning method is set to "offsets"). You must give a
−
                                Windows opacity between 0.1 and 1
+
           comma-separated list of coordinates (eg: 10,10,150,10).
−
           Sets the windows opacity between 0.1 and 1 for main interface,
+
       --mosaic-delay=<integer>   Delay
−
           playlist and extended panel. This option only works with Windows and
+
           Pictures coming from the mosaic elements will be delayed according to
−
           X11 with composite extensions.
+
           this value (in milliseconds). For high values you will need to raise
−
       --qt-fs-opacity=<float [0.100000 .. 1.000000]>
+
           caching at input.
−
                                Fullscreen controller opacity between 0.1 and
+
 
−
                                1
+
Marquee display (marq)
−
           Sets the fullscreen controller opacity between 0.1 and 1 for main
+
Display text above the video
−
           interface, playlist and extended panel. This option only works with
+
       --marq-marquee=<string>    Text
−
           Windows and X11 with composite extensions.
+
          Marquee text to display. (Available format strings: %Y = year, %m =
−
      --qt-system-tray, --no-qt-system-tray
+
           month, %d = day, %H = hour, %M = minute, %S = second, ...)
−
                                Systray icon (default enabled)
+
       --marq-file=<string>      Text file
−
          Show an icon in the systray allowing you to control VLC media player
+
          File to read the marquee text from.
−
          for basic actions. (default enabled)
+
  Position:
−
       --qt-start-minimized, --no-qt-start-minimized
+
      --marq-x=<integer>        X offset
−
                                Start VLC with only a systray icon (default
+
           X offset, from the left screen edge.
−
                                disabled)
+
       --marq-y=<integer>        Y offset
−
           VLC will start with just an icon in your taskbar (default disabled)
+
           Y offset, down from the top.
−
       --qt-video-autoresize, --no-qt-video-autoresize
+
       --marq-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
−
                                Resize interface to the native video size
+
                                 Marquee position
−
                                (default enabled)
+
           You can enforce the marquee position on the video (0=center, 1=left,
−
          You have two choices:
+
           2=right, 4=top, 8=bottom, you can also use combinations of these
−
- The interface will resize to the native
+
           values, eg 6 = top-right).
−
           video size
+
  Font:
−
- The video will fit to the interface size
+
       --marq-opacity=<integer [0 .. 255]>
−
By default,
+
                                 Opacity
−
          interface resize to the native video size. (default enabled)
+
          Opacity (inverse of transparency) of overlayed text. 0 = transparent,
−
       --qt-name-in-title, --no-qt-name-in-title
+
           255 = totally opaque.
−
                                Show playing item name in window title
+
       --marq-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
−
                                (default enabled)
+
                                 Color
−
           Show the name of the song or video in the controler window title.
+
           Color of the text that will be rendered on the video. This must be an
−
          (default enabled)
+
           hexadecimal (like HTML colors). The first two chars are for red, then
−
       --qt-fs-controller, --no-qt-fs-controller
+
          green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
−
                                Show a controller in fullscreen mode (default
+
           #FFFF00 = yellow (red + green), #FFFFFF = white
−
                                enabled)
+
       --marq-size=<integer [0 .. 4096]>  
−
          Show a controller in fullscreen mode (default enabled)
+
                                 Font size, pixels
−
      --qt-volume-complete, --no-qt-volume-complete
+
           Font size, in pixels. Default is 0 (use default font size).
−
                                 Allow the volume to be set to 400% (default
+
  Misc:
−
                                disabled)
+
       --marq-timeout=<integer>   Timeout
−
           Allow the volume to have range from 0% to 400%, instead of 0% to
+
           Number of milliseconds the marquee must remain displayed. Default
−
           200%. This option can distort the audio, since it uses software
+
           value is 0 (remains forever).
−
           amplification. (default disabled)
+
       --marq-refresh=<integer>  Refresh period in ms
−
       --qt-autosave-volume, --no-qt-autosave-volume
+
           Number of milliseconds between string updates. This is mainly useful
−
                                 Automatically save the volume on exit
+
           when using meta data or time format string sequences.
−
                                (default disabled)
 
−
           Automatically save the volume on exit (default disabled)
 
−
       --qt-embedded-open, --no-qt-embedded-open
 
−
                                Embed the file browser in open dialog
 
−
                                (default disabled)
 
−
          Embed the file browser in open dialog (default disabled)
 
−
      --qt-recentplay, --no-qt-recentplay
 
−
                                Save the recently played items in the menu
 
−
                                (default enabled)
 
−
          Save the recently played items in the menu (default enabled)
 
−
      --qt-recentplay-filter=<string>
 
−
                                List of words separated by | to filter
 
−
          Regular expression used to filter the recent items played in the
 
−
          player
 
−
      --qt-adv-options, --no-qt-adv-options
 
−
                                Advanced options (default disabled)
 
−
          Show all the advanced options in the dialogs. (default disabled)
 
−
      --qt-advanced-pref, --no-qt-advanced-pref
 
−
                                Show advanced preferences over simple ones
 
−
                                (default disabled)
 
−
          Show advanced preferences and not simple preferences when opening the
 
−
          preferences dialog. (default disabled)
 
−
      --qt-error-dialogs, --no-qt-error-dialogs
 
−
                                Show unimportant error and warnings dialogs
 
−
                                (default enabled)
 
−
          Show unimportant error and warnings dialogs (default enabled)
 
−
      --qt-updates-notif, --no-qt-updates-notif
 
−
                                Activate the updates availability
 
−
                                 notification (default enabled)
 
−
           Activate the automatic notification of new versions of the software.
 
−
           It runs once every two weeks. (default enabled)
 
−
      --qt-updates-days=<integer>
 
−
                                Number of days between two update checks
 
−
           Number of days between two update checks
 
−
       --qt-slider-colours=<string>
 
−
                                 Define the colors of the volume slider
 
−
           Define the colors of the volume slider
 
−
By specifying the 12 numbers
 
−
          separated by a ';'
 
−
Default is '255;255;255;20;226;20;255;176;15;235;30
 
−
          ;20'
 
−
An alternative can be '30;30;50;40;40;100;50;50;160;150;150;255'
 
−
      --qt-privacy-ask, --no-qt-privacy-ask
 
−
                                Ask for network policy at start (default
 
−
                                enabled)
 
−
          Ask for network policy at start (default enabled)
 
−
       --qt-fullscreen-screennumber=<integer>
 
−
                                Define which screen fullscreen goes
 
−
           Screennumber of fullscreen, instead ofsame screen where interface is
 
−
      --qt-autoload-extensions, --no-qt-autoload-extensions
 
−
                                Load extensions on startup (default enabled)
 
−
           Automatically load the extensions module on startup (default enabled)
 
−
       --qt-disable-volume-keys, --no-qt-disable-volume-keys
 
−
                                Ignore keyboard volume buttons. (default
 
−
                                enabled)
 
−
           With this option checked, the volume up, volume down and mute buttons
 
−
          on your keyboard will always change your system volume. With this
 
−
           option unchecked, the volume buttons will change VLC's volume when
 
−
          VLC is selected and change the system volume when VLC is not
 
−
          selected. (default enabled)
 
  
−
  Puzzle interactive game video filter
+
  Logo sub source (logo)
−
       --puzzle-rows=<integer [2 .. 16]>
+
Use a local picture as logo on the video
−
                                Number of puzzle rows
+
       --logo-file=<string>      Logo filenames
−
           Number of puzzle rows
+
          Full path of the image files to use. Format is <image>[,<delay in
−
       --puzzle-cols=<integer [2 .. 16]>
+
          ms>[,<alpha>]][;<image>[,<delay>[,<alpha>]]][;...]. If you only have
−
                                 Number of puzzle columns
+
          one file, simply enter its filename.
−
           Number of puzzle columns
+
      --logo-x=<integer>         X coordinate
−
       --puzzle-black-slot, --no-puzzle-black-slot
+
          X coordinate of the logo. You can move the logo by left-clicking it.
−
                                 Make one tile a black slot (default disabled)
+
      --logo-y=<integer>        Y coordinate
−
           Make one slot black. Other tiles can only be swapped with the black
+
          Y coordinate of the logo. You can move the logo by left-clicking it.
−
           slot. (default disabled)
+
      --logo-delay=<integer>    Logo individual image time in ms
 +
          Individual image display time of 0 - 60000 ms.
 +
      --logo-repeat=<integer>    Logo animation # of loops
 +
           Number of loops for the logo animation. -1 = continuous, 0 = disabled
 +
       --logo-opacity=<integer [0 .. 255]>  
 +
                                 Opacity of the logo
 +
          Logo opacity value (from 0 for full transparency to 255 for full
 +
           opacity).
 +
       --logo-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
 +
                                 Logo position
 +
          Enforce the logo position on the video (0=center, 1=left, 2=right,
 +
           4=top, 8=bottom, you can also use combinations of these values, eg 6
 +
           = top-right).
  
−
  MPEG-PS demuxer
+
  Audio Bar Graph Video sub source (audiobargraph_v)
−
       --ps-trust-timestamps, --no-ps-trust-timestamps
+
      --audiobargraph_v-x=<integer>
−
                                 Trust MPEG timestamps (default enabled)
+
                                X coordinate
−
           Normally we use the timestamps of the MPEG files to calculate
+
          X coordinate of the bargraph.
−
           position and duration. However sometimes this might not be usable.
+
       --audiobargraph_v-y=<integer>
−
           Disable this option to calculate from the bitrate instead. (default
+
                                Y coordinate
−
          enabled)
+
          Y coordinate of the bargraph.
 +
      --audiobargraph_v-transparency=<integer [0 .. 255]>
 +
                                Transparency of the bargraph
 +
          Bargraph transparency value (from 0 for full transparency to 255 for
 +
          full opacity).
 +
      --audiobargraph_v-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
 +
                                 Bargraph position
 +
          Enforce the bargraph position on the video (0=center, 1=left,
 +
           2=right, 4=top, 8=bottom, you can also use combinations of these
 +
           values, eg 6 = top-right).
 +
      --audiobargraph_v-barWidth=<integer>
 +
                                Bar width in pixel
 +
          Width in pixel of each bar in the BarGraph to be displayed.
 +
      --audiobargraph_v-barHeight=<integer>
 +
                                Bar Height in pixel
 +
           Height in pixel of BarGraph to be displayed.
  
−
  libprojectM effect
+
  Universal Plug'n'Play (upnp)
−
       --projectm-preset-path=<string>
+
       --satip-channelist={ASTRA_19_2E,ASTRA_28_2E,ASTRA_23_5E,MasterList,ServerList,CustomList}
−
                                 projectM preset path
+
                                 SAT>IP channel list
−
           Path to the projectM preset directory
+
           SAT>IP channel list
−
      --projectm-title-font=<string>
+
       --satip-channellist-url=<string>  
−
                                Title font
+
                                 Custom SAT>IP channel list URL
−
          Font used for the titles
+
           Custom SAT>IP channel list URL
−
       --projectm-menu-font=<string>
 
−
                                 Font menu
 
−
          Font used for the menus
 
−
      --projectm-width=<integer> Video width
 
−
           The width of the video window, in pixels.
 
−
      --projectm-height=<integer>
 
−
                                Video height
 
−
          The height of the video window, in pixels.
 
−
      --projectm-meshx=<integer> Mesh width
 
−
          The width of the mesh, in pixels.
 
−
      --projectm-meshy=<integer> Mesh height
 
−
          The height of the mesh, in pixels.
 
−
      --projectm-texture-size=<integer>
 
−
                                Texture size
 
−
          The size of the texture, in pixels.
 
  
−
  Video post processing filter
+
  Network streams (SAP) (sap)
−
       --postproc-q=<integer [0 .. 6]>
+
       --sap-addr=<string>       SAP multicast address
−
                                Post processing quality
+
          The SAP module normally chooses itself the right addresses to listen
−
           Quality of post processing. Valid range is 0 to 6
+
           to. However, you can specify a specific address.
−
Higher levels
+
      --sap-timeout=<integer>    SAP timeout (seconds)
−
           require considerable more CPU power, but produce better looking
+
           Delay after which SAP items get deleted if no new announcement is
−
           pictures.
+
           received.
−
       --postproc-name=<string>  FFmpeg post processing filter chains
+
       --sap-parse, --no-sap-parse
−
           FFmpeg post processing filter chains
+
                                Try to parse the announce
−
 
+
                                (default enabled)
−
PORTAUDIO audio output
+
           This enables actual parsing of the announces by the SAP module.
−
       --portaudio-audio-device=<integer>
+
          Otherwise, all announcements are parsed by the "live555" (RTP/RTSP)
−
                                 Output device
+
          module.
−
           Portaudio identifier for the output device
+
       --sap-strict, --no-sap-strict
 +
                                SAP Strict mode
 +
                                 (default disabled)
 +
           When this is set, the SAP parser will discard some non-compliant
 +
          announcements.
  
−
  Podcasts
+
  Podcasts (podcast)
 
       --podcast-urls=<string>    Podcast URLs list
 
       --podcast-urls=<string>    Podcast URLs list
 
           Enter the list of podcasts to retrieve, separated by '|' (pipe).
 
           Enter the list of podcasts to retrieve, separated by '|' (pipe).
  
−
  Playlist
+
  MPEG-I/II video packetizer (mpegvideo)
−
      --playlist-autostart, --no-playlist-autostart
+
       --packetizer-mpegvideo-sync-iframe, --no-packetizer-mpegvideo-sync-iframe
−
                                Auto start (default enabled)
+
                                 Sync on Intra Frame
−
          Automatically start playing the playlist content once it's loaded.
+
                                 (default disabled)
−
          (default enabled)
+
           Normally the packetizer would sync on the next full frame. This flags
−
       --playlist-skip-ads, --no-playlist-skip-ads
+
           instructs the packetizer to sync on the first Intra Frame found.
−
                                 Skip ads (default enabled)
 
−
          Use playlist options usually used to prevent ads skipping to detect
 
−
          ads and prevent adding them to the playlist. (default enabled)
 
−
      --shoutcast-show-adult, --no-shoutcast-show-adult
 
−
                                 Show shoutcast adult content (default
 
−
                                disabled)
 
−
           Show NC17 rated video streams when using shoutcast video playlists.
 
−
           (default disabled)
 
  
−
  Parametric Equalizer
+
  TS muxer (libdvbpsi) (mux_ts)
−
       --param-eq-lowf=<float>    Low freq (Hz)
+
       --sout-ts-standard={dvb,atsc}
−
       --param-eq-lowgain=<float [-20.000000 .. 20.000000]>
+
                                Digital TV Standard
−
                                 Low freq gain (dB)
+
       --sout-ts-pid-video=<integer [32 .. 8190]>  
−
       --param-eq-highf=<float>  High freq (Hz)
+
                                 Video PID
−
      --param-eq-highgain=<float [-20.000000 .. 20.000000]>
+
          Assign a fixed PID to the video stream. The PCR PID will
−
                                 High freq gain (dB)
+
          automatically be the video.
−
       --param-eq-f1=<float>      Freq 1 (Hz)
+
       --sout-ts-pid-audio=<integer [32 .. 8190]>  
−
      --param-eq-gain1=<float [-20.000000 .. 20.000000]>
+
                                 Audio PID
−
                                 Freq 1 gain (dB)
+
          Assign a fixed PID to the audio stream.
−
       --param-eq-q1=<float [0.100000 .. 100.000000]>
+
       --sout-ts-pid-spu=<integer [32 .. 8190]>  
−
                                 Freq 1 Q
+
                                 SPU PID
−
       --param-eq-f2=<float>     Freq 2 (Hz)
+
          Assign a fixed PID to the SPU.
−
       --param-eq-gain2=<float [-20.000000 .. 20.000000]>
+
       --sout-ts-pid-pmt=<integer [32 .. 8190]>  
−
                                Freq 2 gain (dB)
+
                                 PMT PID
−
       --param-eq-q2=<float [0.100000 .. 100.000000]>
+
          Assign a fixed PID to the PMT
−
                                 Freq 2 Q
+
       --sout-ts-tsid=<integer>   TS ID
−
       --param-eq-f3=<float>      Freq 3 (Hz)
+
          Assign a fixed Transport Stream ID.
−
      --param-eq-gain3=<float [-20.000000 .. 20.000000]>
+
       --sout-ts-netid=<integer> NET ID
−
                                Freq 3 gain (dB)
+
          Assign a fixed Network ID (for SDT table)
−
      --param-eq-q3=<float [0.100000 .. 100.000000]>
+
       --sout-ts-program-pmt=<string>  
−
                                 Freq 3 Q
+
                                 PMT Program numbers
−
 
+
          Assign a program number to each PMT. This requires "Set PID to ID of
−
Panoramix: wall with overlap video filter
+
          ES" to be enabled.
−
Split the video in multiple windows to display on a wall of screens
+
       --sout-ts-es-id-pid, --no-sout-ts-es-id-pid
−
      --panoramix-cols=<integer> Number of columns
+
                                 Set PID to ID of ES
−
           Select the number of horizontal video windows in which to split the
+
                                (default disabled)
−
           video
+
           Sets PID to the ID if the incoming ES. This is for use with
−
      --panoramix-rows=<integer> Number of rows
+
           --ts-es-id-pid, and allows having the same PIDs in the input and
−
          Select the number of vertical video windows in which to split the
+
           output streams.
−
           video
+
       --sout-ts-muxpmt=<string> Mux PMT (requires --sout-ts-es-id-pid)
−
       --panoramix-bz-length=<integer [0 .. 100]>
+
           Define the pids to add to each pmt. This requires "Set PID to ID of
−
                                length of the overlapping area (in %)
+
          ES" to be enabled.
−
           Select in percent the length of the blended zone
+
       --sout-ts-sdtdesc=<string> SDT Descriptors (requires --sout-ts-es-id-pid)
−
       --panoramix-bz-height=<integer [0 .. 100]>
+
           Defines the descriptors of each SDT. This requires "Set PID to ID of
−
                                height of the overlapping area (in %)
+
          ES" to be enabled.
−
           Select in percent the height of the blended zone (case of 2x2 wall)
+
       --sout-ts-alignment, --no-sout-ts-alignment
−
       --panoramix-attenuate, --no-panoramix-attenuate
+
                                Data alignment
−
                                 Attenuation (default enabled)
+
                                 (default enabled)
−
           Check this option if you want attenuate blended zone by this plug-in
+
           Enforces alignment of all access units on PES boundaries. Disabling
−
           (if option is unchecked, attenuate is made by opengl) (default
+
           this might save some bandwidth but introduce incompatibilities.
−
          enabled)
+
       --sout-ts-shaping=<integer>  
−
       --panoramix-bz-begin=<integer [0 .. 100]>
+
                                 Shaping delay (ms)
−
                                 Attenuation, begin (in %)
+
           Cut the stream in slices of the given duration, and ensure a constant
−
           Select in percent the Lagrange coeff of the beginning blended zone
+
          bitrate between the two boundaries. This avoids having huge bitrate
−
       --panoramix-bz-middle=<integer [0 .. 100]>
+
          peaks, especially for reference frames.
−
                                 Attenuation, middle (in %)
+
       --sout-ts-use-key-frames, --no-sout-ts-use-key-frames
−
           Select in percent the Lagrange coeff of the middle of blended zone
+
                                Use keyframes
−
      --panoramix-bz-end=<integer [0 .. 100]>
+
                                 (default disabled)
−
                                Attenuation, end (in %)
+
           If enabled, and shaping is specified, the TS muxer will place the
−
           Select in percent the Lagrange coeff of the end of blended zone
+
          boundaries at the end of I pictures. In that case, the shaping
−
       --panoramix-bz-middle-pos=<integer [1 .. 99]>
+
          duration given by the user is a worse case used when no reference
−
                                middle position (in %)
+
          frame is available. This enhances the efficiency of the shaping
−
           Select in percent (50 is center) the position of the middle point
+
          algorithm, since I frames are usually the biggest frames in the
−
           (Lagrange) of blended zone
+
           stream.
−
       --panoramix-bz-gamma-red=<float [0.000000 .. 5.000000]>
+
       --sout-ts-pcr=<integer>   PCR interval (ms)
−
                                Gamma (Red) correction
+
           Set at which interval PCRs (Program Clock Reference) will be sent (in
−
           Select the gamma for the correction of blended zone (Red or Y
+
           milliseconds). This value should be below 100ms. (default is 70ms).
−
          component)
+
       --sout-ts-bmin=<integer>   Minimum B (deprecated)
−
       --panoramix-bz-gamma-green=<float [0.000000 .. 5.000000]>
+
           This setting is deprecated and not used anymore
−
                                Gamma (Green) correction
+
       --sout-ts-bmax=<integer>   Maximum B (deprecated)
−
           Select the gamma for the correction of blended zone (Green or U
+
           This setting is deprecated and not used anymore
−
          component)
+
       --sout-ts-dts-delay=<integer>  
−
       --panoramix-bz-gamma-blue=<float [0.000000 .. 5.000000]>
+
                                 DTS delay (ms)
−
                                 Gamma (Blue) correction
+
           Delay the DTS (decoding time stamps) and PTS (presentation
−
           Select the gamma for the correction of blended zone (Blue or V
+
           timestamps) of the data in the stream, compared to the PCRs. This
−
           component)
+
          allows for some buffering inside the client decoder.
−
       --panoramix-bz-blackcrush-red=<integer [0 .. 255]>
+
       --sout-ts-crypt-audio, --no-sout-ts-crypt-audio
−
                                Black Crush for Red
+
                                 Crypt audio
−
          Select the Black Crush of blended zone (Red or Y component)
+
                                (default enabled)
−
      --panoramix-bz-blackcrush-green=<integer [0 .. 255]>
+
          Crypt audio using CSA
−
                                 Black Crush for Green
+
       --sout-ts-crypt-video, --no-sout-ts-crypt-video
−
          Select the Black Crush of blended zone (Green or U component)
+
                                 Crypt video
−
       --panoramix-bz-blackcrush-blue=<integer [0 .. 255]>
+
                                (default enabled)
−
                                Black Crush for Blue
+
          Crypt video using CSA
−
          Select the Black Crush of blended zone (Blue or V component)
+
       --sout-ts-csa-ck=<string> CSA Key
−
      --panoramix-bz-whitecrush-red=<integer [0 .. 255]>
+
          CSA encryption key. This must be a 16 char string (8 hexadecimal
−
                                 White Crush for Red
+
           bytes).
−
          Select the White Crush of blended zone (Red or Y component)
+
       --sout-ts-csa2-ck=<string> Second CSA Key
−
       --panoramix-bz-whitecrush-green=<integer [0 .. 255]>
+
          The even CSA encryption key. This must be a 16 char string (8
−
                                White Crush for Green
+
           hexadecimal bytes).
−
           Select the White Crush of blended zone (Green or U component)
+
       --sout-ts-csa-use=<string> CSA Key in use
−
       --panoramix-bz-whitecrush-blue=<integer [0 .. 255]>
+
           CSA encryption key used. It can be the odd/first/1 (default) or the
−
                                White Crush for Blue
+
          even/second/2 one.
−
           Select the White Crush of blended zone (Blue or V component)
+
       --sout-ts-csa-pkt=<integer>  
−
       --panoramix-bz-blacklevel-red=<integer [0 .. 255]>
+
                                 Packet size in bytes to encrypt
−
                                Black Level for Red
+
           Size of the TS packet to encrypt. The encryption routines subtract
−
           Select the Black Level of blended zone (Red or Y component)
+
          the TS-header from the value before encrypting.
−
       --panoramix-bz-blacklevel-green=<integer [0 .. 255]>
+
 
−
                                 Black Level for Green
+
PS muxer (ps)
−
           Select the Black Level of blended zone (Green or U component)
+
       --sout-ps-dts-delay=<integer>  
−
      --panoramix-bz-blacklevel-blue=<integer [0 .. 255]>
+
                                 DTS delay (ms)
−
                                Black Level for Blue
+
           Delay the DTS (decoding time stamps) and PTS (presentation
−
          Select the Black Level of blended zone (Blue or V component)
+
          timestamps) of the data in the stream, compared to the SCRs. This
−
       --panoramix-bz-whitelevel-red=<integer [0 .. 255]>
+
          allows for some buffering inside the client decoder.
−
                                 White Level for Red
+
       --sout-ps-pes-max-size=<integer>  
−
           Select the White Level of blended zone (Red or Y component)
+
                                 PES maximum size
−
      --panoramix-bz-whitelevel-green=<integer [0 .. 255]>
+
           Set the maximum allowed PES size when producing the MPEG PS streams.
−
                                White Level for Green
 
−
          Select the White Level of blended zone (Green or U component)
 
−
       --panoramix-bz-whitelevel-blue=<integer [0 .. 255]>
 
−
                                 White Level for Blue
 
−
           Select the White Level of blended zone (Blue or V component)
 
−
      --panoramix-active=<string>
 
−
                                Active windows
 
−
          Comma separated list of active windows, defaults to all
 
  
−
  MPEG-I/II video packetizer
+
  Ogg/OGM muxer (mux_ogg)
−
       --packetizer-mpegvideo-sync-iframe, --no-packetizer-mpegvideo-sync-iframe
+
       --sout-ogg-indexintvl=<integer [0 .. 2147483647]>
−
                                 Sync on Intra Frame (default disabled)
+
                                Index interval
−
           Normally the packetizer would sync on the next full frame. This flags
+
          Minimal index interval, in microseconds. Set to 0 to disable index
−
           instructs the packetizer to sync on the first Intra Frame found.
+
          creation.
−
          (default disabled)
+
      --sout-ogg-indexratio=<float [1.000000 .. 1000.000000]>
 +
                                 Index size ratio
 +
           Set index size ratio. Alters default (60min content) or estimated
 +
           size.
  
−
  On Screen Display menu
+
  MP4/MOV muxer (mp4)
−
      --osdmenu-x=<integer>      X coordinate
+
       --sout-mp4-faststart, --no-sout-mp4-faststart
−
          You can move the OSD menu by left-clicking on it.
+
                                 Create "Fast Start" files
−
      --osdmenu-y=<integer>      Y coordinate
+
                                 (default enabled)
−
          You can move the OSD menu by left-clicking on it.
+
           Create "Fast Start" files. "Fast Start" files are optimized for
−
       --osdmenu-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
           downloads and allow the user to start previewing the file while it is
−
                                Menu position
+
           downloading.
−
          You can enforce the OSD menu position on the video (0=center, 1=left,
 
−
          2=right, 4=top, 8=bottom, you can also use combinations of these
 
−
          values, eg. 6 = top-right).
 
−
      --osdmenu-file=<string>    Configuration file
 
−
          Configuration file for the OSD Menu.
 
−
      --osdmenu-file-path=<string>
 
−
                                 Path to OSD menu images
 
−
          Path to the OSD menu images. This will override the path defined in
 
−
          the OSD configuration file.
 
−
      --osdmenu-timeout=<integer>
 
−
                                 Menu timeout
 
−
          OSD menu pictures get a default timeout of 15 seconds added to their
 
−
           remaining time. This will ensure that they are at least the specified
 
−
           time visible.
 
−
      --osdmenu-update=<integer [0 .. 1000]>
 
−
                                Menu update interval
 
−
          The default is to update the OSD menu picture every 200 ms. Shorten
 
−
          the update time for environments that experience transmissions
 
−
          errors. Be careful with this option as encoding OSD menu pictures is
 
−
           very computing intensive. The range is 0 - 1000 ms.
 
−
      --osdmenu-alpha=<integer [0 .. 255]>
 
−
                                Alpha transparency value (default 255)
 
−
          The transparency of the OSD menu can be changed by giving a value
 
−
          between 0 and 255. A lower value specifies more transparency a higher
 
−
          means less transparency. The default is being not transparent (value
 
−
          255) the minimum is fully transparent (value 0).
 
  
−
  VLM remote control interface
+
  AVI muxer (avi)
−
       --telnet-host=<string>     Host
+
       --sout-avi-artist=<string> Artist
−
          This is the host on which the interface will listen. It defaults to
+
      --sout-avi-date=<string>  Date
−
          all network interfaces (0.0.0.0). If you want this interface to be
+
      --sout-avi-genre=<string>  Genre
−
          available only on the local machine, enter "127.0.0.1".
+
      --sout-avi-copyright=<string>  
−
       --telnet-port=<integer>   Port
+
                                Copyright
−
          This is the TCP port on which this interface will listen. It defaults
+
      --sout-avi-comment=<string>
−
          to 4212.
+
                                Comment
−
       --telnet-password=<string> Password
+
       --sout-avi-name=<string>   Name
−
          A single administration password is used to protect this interface.
+
      --sout-avi-subject=<string>
−
          The default value is "admin".
+
                                Subject
 +
       --sout-avi-encoder=<string>  
 +
                                Encoder
 +
      --sout-avi-keywords=<string>
 +
                                Keywords
  
−
  Remote control interface
+
  ASF muxer (asf)
−
       --rc-show-pos, --no-rc-show-pos
+
       --sout-asf-title=<string>  Title
−
                                 Show stream position (default disabled)
+
          Title to put in ASF comments.
−
           Show the current position in seconds within the stream from time to
+
      --sout-asf-author=<string> Author
−
          time. (default disabled)
+
          Author to put in ASF comments.
−
       --rc-quiet, --no-rc-quiet  Do not open a DOS command box interface
+
      --sout-asf-copyright=<string>
−
                                 (default disabled)
+
                                 Copyright
−
           By default the rc interface plugin will start a DOS command box.
+
           Copyright string to put in ASF comments.
−
          Enabling the quiet mode will not bring this command box but can also
+
       --sout-asf-comment=<string>
−
           be pretty annoying when you want to stop VLC and no video window is
+
                                 Comment
−
           open. (default disabled)
+
           Comment to put in ASF comments.
−
       --rc-host=<string>         TCP command input
+
      --sout-asf-rating=<string> Rating
−
           Accept commands over a socket rather than stdin. You can set the
+
           "Rating" to put in ASF comments.
−
           address and port the interface will bind to.
+
      --sout-asf-packet-size=<integer>
 +
                                Packet Size
 +
           ASF packet size -- default is 4096 bytes
 +
       --sout-asf-bitrate-override=<integer>  
 +
                                Bitrate override
 +
           Do not try to guess ASF bitrate. Setting this, allows you to control
 +
           how Windows Media Player will cache streamed content. Set to
 +
          audio+video bitrate in bytes
  
−
  HTTP remote control interface
+
  Legacy RTSP VoD server (rtsp)
−
      --http-host=<string>      Host address
+
       --rtsp-raw-mux=<string>   MUX for RAW RTSP transport
−
          Address and port the HTTP interface will listen on. It defaults to
+
           MUX for RAW RTSP transport
−
          all network interfaces (0.0.0.0). If you want the HTTP interface to
+
       --rtsp-throttle-users=<integer>  
−
          be available only on the local machine, enter 127.0.0.1
+
                                Maximum number of connections
−
       --http-src=<string>        Source directory
+
           This limits the maximum number of clients that can connect to the
−
          Source directory
+
           RTSP VOD. 0 means no limit.
−
      --http-handlers=<string>   Handlers
+
       --rtsp-session-timeout=<integer>  
−
           List of handler extensions and executable paths (for instance:
+
                                 Sets the timeout option in the RTSP session
−
          php=/usr/bin/php,pl=/usr/bin/perl).
+
                                 string
−
       --http-album-art, --no-http-album-art
+
           Defines what timeout option to add to the RTSP session ID string.
−
                                Export album art as /art (default disabled)
+
           Setting it to a negative number removes the timeout option entirely.
−
          Allow exporting album art for current playlist items at the /art and
+
           This is needed by some IPTV STBs (such as those made by HansunTech)
−
          /art?id=<id> URLs. (default disabled)
+
           which get confused by it. The default is 5.
−
  HTTP SSL:
 
−
      --http-intf-cert=<string>  Certificate file
 
−
           HTTP interface x509 PEM certificate file (enables SSL).
 
−
      --http-intf-key=<string>  Private key file
 
−
           HTTP interface x509 PEM private key file.
 
−
      --http-intf-ca=<string>    Root CA file
 
−
          HTTP interface x509 PEM trusted root CA certificates file.
 
−
       --http-intf-crl=<string>   CRL file
 
−
          HTTP interace Certificates Revocation List file.
 
−
 
 
−
Windows Service interface
 
−
      --ntservice-install, --no-ntservice-install
 
−
                                 Install Windows Service (default disabled)
 
−
          Install the Service and exit. (default disabled)
 
−
      --ntservice-uninstall, --no-ntservice-uninstall
 
−
                                 Uninstall Windows Service (default disabled)
 
−
           Uninstall the Service and exit. (default disabled)
 
−
      --ntservice-name=<string>  Display name of the Service
 
−
           Change the display name of the Service.
 
−
      --ntservice-options=<string>
 
−
                                Configuration options
 
−
           Configuration options that will be used by the Service (eg. --foo=bar
 
−
          --no-foobar). It should be specified at install time so the Service
 
−
          is properly configured.
 
−
      --ntservice-extraintf=<string>
 
−
                                Extra interface modules
 
−
           Additional interfaces spawned by the Service. It should be specified
 
−
          at install time so the Service is properly configured. Use a comma
 
−
          separated list of interface modules. (common values are: logger, sap,
 
−
          rc, http)
 
  
−
  Volume normalizer
+
  GNU TLS transport layer security (gnutls)
−
       --norm-buff-size=<integer> Number of audio buffers
+
       --gnutls-system-trust, --no-gnutls-system-trust
−
           This is the number of audio buffers on which the power measurement is
+
                                Use system trust database
−
           made. A higher number of buffers will increase the response time of
+
                                (default enabled)
−
          the filter to a spike but will make it less sensitive to short
+
           Trust the root certificates of Certificate Authorities stored in the
−
          variations.
+
           operating system trust database to authenticate TLS sessions.
−
       --norm-max-level=<float>   Maximal volume level
+
       --gnutls-dir-trust=<string>  
−
           If the average power over the last N buffers is higher than this
+
                                Trust directory
−
           value, the volume will be normalized. This value is a positive
+
           Trust directory
−
           floating point number. A value between 0.5 and 10 seems sensible.
+
      --gnutls-priorities={PERFORMANCE,NORMAL,SECURE128,SECURE256,EXPORT}
 +
                                TLS cipher priorities
 +
           Ciphers, key exchange methods, hash functions and compression methods
 +
           can be selected. Refer to GNU TLS documentation for detailed syntax.
  
−
  Network synchronisation
+
  Submission of played songs to last.fm (audioscrobbler)
−
       --netsync-master, --no-netsync-master
+
       --lastfm-username=<string> Username
−
                                Network master clock (default disabled)
+
           The username of your last.fm account
−
           When set then this vlc instance shall dictate its clock for
+
       --lastfm-password=<string> Password
−
          synchronisationover clients listening on the masters network ip
+
           The password of your last.fm account
−
          address (default disabled)
+
       --scrobbler-url=<string>   Scrobbler URL
−
       --netsync-master-ip=<string>
+
           The URL set for an alternative scrobbler engine
−
                                Master server ip address
 
−
           The IP address of the network master clock to use for clock
 
−
          synchronisation.
 
−
       --netsync-timeout=<integer>
 
−
                                UDP timeout (in ms)
 
−
           Amount of time (in ms) to wait before aborting network reception of
 
−
          data.
 
  
−
  TS muxer (libdvbpsi)
+
  Folder meta data (folder)
−
       --sout-ts-pid-video=<integer>
+
       --album-art-filename=<string>  
−
                                 Video PID
+
                                 Album art filename
−
           Assign a fixed PID to the video stream. The PCR PID will
+
           Filename to look for album art in current directory
−
          automatically be the video.
+
 
−
       --sout-ts-pid-audio=<integer>
+
Lua interpreter (lua)
−
                                Audio PID
+
       --lua-intf=<string>        Lua interface
−
           Assign a fixed PID to the audio stream.
+
          Lua interface module to load
−
       --sout-ts-pid-spu=<integer>
+
      --lua-config=<string>     Lua interface configuration
−
                                SPU PID
+
          Lua interface configuration string. Format is: '["<interface module
−
           Assign a fixed PID to the SPU.
+
           name>"] = { <option> = <value>, ...}, ...'.
−
       --sout-ts-pid-pmt=<integer>
+
  Lua HTTP:
−
                                 PMT PID
+
       --http-password=<string>   Password
−
           Assign a fixed PID to the PMT
+
           A single password restricts access to this interface.
−
       --sout-ts-tsid=<integer>   TS ID
+
       --http-src=<string>       Source directory
−
           Assign a fixed Transport Stream ID.
+
          Source directory
−
       --sout-ts-netid=<integer> NET ID
+
      --http-index, --no-http-index
−
           Assign a fixed Network ID (for SDT table)
+
                                Directory index
−
       --sout-ts-program-pmt=<string>
+
                                 (default disabled)
−
                                 PMT Program numbers
+
           Allow to build directory index
−
           Assign a program number to each PMT. This requires "Set PID to ID of
+
  Lua CLI:
−
           ES" to be enabled.
+
       --rc-host=<string>         TCP command input
−
       --sout-ts-es-id-pid, --no-sout-ts-es-id-pid
+
           Accept commands over a socket rather than stdin. You can set the
−
                                 Set PID to ID of ES (default disabled)
+
          address and port the interface will bind to.
−
           Sets PID to the ID if the incoming ES. This is for use with
+
       --cli-host=<string>       CLI input
−
          --ts-es-id-pid, and allows to have the same PIDs in the input and
+
          Accept commands from this source. The CLI defaults to stdin
−
           output streams. (default disabled)
+
           ("*console"), but can also bind to a plain TCP socket
−
       --sout-ts-muxpmt=<string>  Mux PMT (requires --sout-ts-es-id-pid)
+
          ("localhost:4212") or use the telnet protocol
−
           Define the pids to add to each pmt. This requires "Set PID to ID of
+
          ("telnet://0.0.0.0:4212")
−
           ES" to be enabled.
+
  Lua Telnet:
−
       --sout-ts-sdtdesc=<string> SDT Descriptors (requires --sout-ts-es-id-pid)
+
       --telnet-host=<string>    Host
−
           Defines the descriptors of each SDT. Thisrequires "Set PID to ID of
+
          This is the host on which the interface will listen. It defaults to
−
          ES" to be enabled.
+
          all network interfaces (0.0.0.0). If you want this interface to be
−
       --sout-ts-alignment, --no-sout-ts-alignment
+
          available only on the local machine, enter "127.0.0.1".
−
                                 Data alignment (default enabled)
+
      --telnet-port=<integer [1 .. 65535]>  
−
           Enforces alignment of all access units on PES boundaries. Disabling
+
                                 Port
−
           this might save some bandwidth but introduce incompatibilities.
+
          This is the TCP port on which this interface will listen. It defaults
−
          (default enabled)
+
           to 4212.
−
       --sout-ts-shaping=<integer>
+
      --telnet-password=<string> Password
−
                                 Shaping delay (ms)
+
           A single password restricts access to this interface.
−
           Cut the stream in slices of the given duration, and ensure a constant
+
       --lua-sd=<string>         
−
           bitrate between the two boundaries. This avoids having huge bitrate
+
 
−
          peaks, especially for reference frames.
+
File logger (file)
−
       --sout-ts-use-key-frames, --no-sout-ts-use-key-frames
+
      --file-logging, --no-file-logging
−
                                 Use keyframes (default disabled)
+
                                 Log to file
−
           If enabled, and shaping is specified, the TS muxer will place the
+
                                (default disabled)
−
           boundaries at the end of I pictures. In that case, the shaping
+
           Log all VLC messages to a text file.
−
           duration given by the user is a worse case used when no reference
+
      --logfile=<string>        Log filename
−
           frame is available. This enhances the efficiency of the shaping
+
          Specify the log filename.
−
          algorithm, since I frames are usually the biggest frames in the
+
      --logmode={text,html}      Log format
−
          stream. (default disabled)
+
          Specify the logging format.
−
       --sout-ts-pcr=<integer>    PCR interval (ms)
+
      --log-verbose={-1 (Default), 0 (Info), 1 (Error), 2 (Warning), 3 (Debug)}
−
           Set at which interval PCRs (Program Clock Reference) will be sent (in
+
                                Verbosity
−
           milliseconds). This value should be below 100ms. (default is 70ms).
+
          Select the logging verbosity or default to use the same verbosity
−
       --sout-ts-bmin=<integer>   Minimum B (deprecated)
+
           given by --verbose.
−
           This setting is deprecated and not used anymore
+
 
−
       --sout-ts-bmax=<integer>   Maximum B (deprecated)
+
Console logger (console)
−
           This setting is deprecated and not used anymore
+
  -q, --quiet, --no-quiet        Be quiet
−
       --sout-ts-dts-delay=<integer>
+
                                (default disabled)
−
                                 DTS delay (ms)
+
          Turn off all messages on the console.
−
           Delay the DTS (decoding time stamps) and PTS (presentation
+
 
−
           timestamps) of the data in the stream, compared to the PCRs. This
+
Secrets are stored on a file without any encryption (file)
−
           allows for some buffering inside the client decoder.
+
       --keystore-file=<string>  
−
       --sout-ts-crypt-audio, --no-sout-ts-crypt-audio
+
 
−
                                 Crypt audio (default enabled)
+
  Skinnable Interface (skins2)
−
           Crypt audio using CSA (default enabled)
+
      --skins2-last=<string>    Skin to use
−
       --sout-ts-crypt-video, --no-sout-ts-crypt-video
+
          Path to the skin to use.
−
                                 Crypt video (default enabled)
+
      --skins2-config=<string>  Config of last used skin
−
           Crypt video using CSA (default enabled)
+
           Windows configuration of the last skin used. This option is updated
−
       --sout-ts-csa-ck=<string> CSA Key
+
           automatically, do not touch it.
−
           CSA encryption key. This must be a 16 char string (8 hexadecimal
+
       --skins2-systray, --no-skins2-systray
−
           bytes).
+
                                Systray icon
−
       --sout-ts-csa2-ck=<string> Second CSA Key
+
                                (default enabled)
−
           The even CSA encryption key. This must be a 16 char string (8
+
          Show a systray icon for VLC
−
           hexadecimal bytes).
+
      --skins2-taskbar, --no-skins2-taskbar
−
       --sout-ts-csa-use=<string> CSA Key in use
+
                                Show VLC on the taskbar
−
           CSA encryption key used. It can be the odd/first/1 (default) or the
+
                                (default enabled)
−
           even/second/2 one.
+
           Show VLC on the taskbar
−
       --sout-ts-csa-pkt=<integer>
+
       --skins2-transparency, --no-skins2-transparency
−
                                 Packet size in bytes to encrypt
+
                                Enable transparency effects
−
           Size of the TS packet to encrypt. The encryption routines subtract
+
                                 (default disabled)
−
           the TS-header from the value before encrypting.
+
           You can disable all transparency effects if you want. This is mainly
−
 
+
           useful when moving windows does not behave correctly.
−
PS muxer
+
      --skinned-playlist, --no-skinned-playlist
−
       --sout-ps-dts-delay=<integer>
+
                                Use a skinned playlist
−
                                 DTS delay (ms)
+
                                (default enabled)
−
           Delay the DTS (decoding time stamps) and PTS (presentation
+
          Use a skinned playlist
−
           timestamps) of the data in the stream, compared to the SCRs. This
+
       --skinned-video, --no-skinned-video
−
           allows for some buffering inside the client decoder.
+
                                Display video in a skinned window if any
−
       --sout-ps-pes-max-size=<integer>
+
                                 (default enabled)
−
                                 PES maximum size
+
           When set to 'no', this parameter is intended to give old skins a
−
           Set the maximum allowed PES size when producing the MPEG PS streams.
+
           chance to play back video even though no video tag is implemented
−
 
+
 
−
Multipart JPEG muxer
+
Qt interface (qt)
 +
       --qt-minimal-view, --no-qt-minimal-view
 +
                                Start in minimal view (without menus)
 +
                                (default disabled)
 +
          Start in minimal view (without menus)
 +
      --qt-system-tray, --no-qt-system-tray
 +
                                Systray icon
 +
                                 (default enabled)
 +
           Show an icon in the systray allowing you to control VLC media player
 +
           for basic actions.
 +
      --qt-notification={0 (Never), 1 (When minimized), 2 (Always)}
 +
                                Show notification popup on track change
 +
           Show a notification popup with the artist and track name when the
 +
           current playlist item changes, when VLC is minimized or hidden.
 +
      --qt-start-minimized, --no-qt-start-minimized
 +
                                Start VLC with only a systray icon
 +
                                (default disabled)
 +
          VLC will start with just an icon in your taskbar.
 +
       --qt-pause-minimized, --no-qt-pause-minimized
 +
                                Pause the video playback when minimized
 +
                                (default disabled)
 +
           With this option enabled, the playback will be automatically paused
 +
           when minimizing the window.
 +
       --qt-opacity=<float [0.100000 .. 1.000000]>  
 +
                                Windows opacity between 0.1 and 1
 +
          Sets the windows opacity between 0.1 and 1 for main interface,
 +
           playlist and extended panel. This option only works with Windows and
 +
          X11 with composite extensions.
 +
       --qt-fs-opacity=<float [0.100000 .. 1.000000]>  
 +
                                Fullscreen controller opacity between 0.1 and
 +
                                1
 +
          Sets the fullscreen controller opacity between 0.1 and 1 for main
 +
           interface, playlist and extended panel. This option only works with
 +
          Windows and X11 with composite extensions.
 +
       --qt-video-autoresize, --no-qt-video-autoresize
 +
                                Resize interface to the native video size
 +
                                 (default enabled)
 +
           You have two choices:  - The interface will resize to the native
 +
           video size  - The video will fit to the interface size  By default,
 +
           interface resize to the native video size.
 +
       --qt-name-in-title, --no-qt-name-in-title
 +
                                Show playing item name in window title
 +
                                 (default enabled)
 +
           Show the name of the song or video in the controller window title.
 +
       --qt-fs-controller, --no-qt-fs-controller
 +
                                Show a controller in fullscreen mode
 +
                                 (default enabled)
 +
           Show a controller in fullscreen mode
 +
      --qt-recentplay, --no-qt-recentplay
 +
                                Save the recently played items in the menu
 +
                                (default enabled)
 +
          Save the recently played items in the menu
 +
       --qt-recentplay-filter=<string>  
 +
                                List of words separated by | to filter
 +
          Regular expression used to filter the recent items played in the
 +
           player.
 +
      --qt-continue={0 (Never), 1 (Ask), 2 (Always)}
 +
                                Continue playback?
 +
           Continue playback?
 +
      --qt-updates-notif, --no-qt-updates-notif
 +
                                Activate the updates availability notification
 +
                                (default enabled)
 +
          Activate the automatic notification of new versions of the software.
 +
          It runs once every two weeks.
 +
       --qt-updates-days=<integer [0 .. 180]>  
 +
                                Number of days between two update checks
 +
           Number of days between two update checks
 +
      --qt-disable-volume-keys, --no-qt-disable-volume-keys
 +
                                Ignore keyboard volume buttons.
 +
                                (default enabled)
 +
          With this option checked, the volume up, volume down and mute buttons
 +
           on your keyboard will always change your system volume. With this
 +
          option unchecked, the volume buttons will change VLC's volume when
 +
          VLC is selected and change the system volume when VLC is not
 +
          selected.
 +
       --qt-embedded-open, --no-qt-embedded-open
 +
                                Embed the file browser in open dialog
 +
                                (default disabled)
 +
           Embed the file browser in open dialog
 +
      --qt-advanced-pref, --no-qt-advanced-pref
 +
                                Show advanced preferences over simple ones
 +
                                (default disabled)
 +
          Show advanced preferences and not simple preferences when opening the
 +
           preferences dialog.
 +
       --qt-error-dialogs, --no-qt-error-dialogs
 +
                                Show unimportant error and warnings dialogs
 +
                                (default enabled)
 +
          Show unimportant error and warnings dialogs
 +
      --qt-slider-colours=<string>  
 +
                                 Define the colors of the volume slider
 +
           Define the colors of the volume slider By specifying the 12 numbers
 +
          separated by a ';' Default is
 +
          '255;255;255;20;226;20;255;176;15;235;30;20' An alternative can be
 +
           '30;30;50;40;40;100;50;50;160;150;150;255'
 +
      --qt-privacy-ask, --no-qt-privacy-ask
 +
                                Ask for network policy at start
 +
                                (default disabled)
 +
          Ask for network policy at start
 +
       --qt-fullscreen-screennumber=<integer>  
 +
                                 Define which screen fullscreen goes
 +
          Screennumber of fullscreen, instead of same screen where interface
 +
          is.
 +
      --qt-autoload-extensions, --no-qt-autoload-extensions
 +
                                Load extensions on startup
 +
                                (default enabled)
 +
           Automatically load the extensions module on startup.
 +
      --qt-bgcone, --no-qt-bgcone
 +
                                Display background cone or art
 +
                                (default enabled)
 +
          Display background cone or current album art when not playing. Can be
 +
          disabled to prevent burning screen.
 +
      --qt-bgcone-expands, --no-qt-bgcone-expands
 +
                                Expanding background cone or art
 +
                                (default disabled)
 +
           Background art fits window's size.
 +
      --qt-icon-change, --no-qt-icon-change
 +
                                Allow automatic icon changes
 +
                                (default enabled)
 +
          This option allows the interface to change its icon on various
 +
           occasions.
 +
       --qt-max-volume=<integer [60 .. 300]>
 +
                                Maximum Volume displayed
 +
          Maximum Volume displayed
 +
      --qt-fs-sensitivity=<integer [0 .. 4000]>  
 +
                                 Fullscreen controller mouse sensitivity
 +
          Fullscreen controller mouse sensitivity
 +
      --qt-auto-raise={0 (Never), 1 (Video), 2 (Audio), 3 (Audio/Video)}
 +
                                When to raise the interface
 +
           This option allows the interface to be raised automatically when a
 +
          video/audio playback starts, or never.
  
−
  MP4/MOV muxer
+
  VC1 video demuxer (vc1)
−
       --sout-mp4-faststart, --no-sout-mp4-faststart
+
       --vc1-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
                                 Create "Fast Start" files (default enabled)
+
                                 Frames per Second
−
           Create "Fast Start" files. "Fast Start" files are optimized for
+
           Desired frame rate for the VC-1 stream.
−
          downloads and allow the user to start previewing the file while it is
 
−
          downloading. (default enabled)
 
  
−
  ASF muxer
+
  MPEG Transport Stream demuxer (ts)
−
       --sout-asf-title=<string>  Title
+
       --ts-standard={auto,mpeg,dvb,arib,atsc,tdmb}
−
           Title to put in ASF comments.
+
                                Digital TV Standard
−
       --sout-asf-author=<string> Author
+
          Selects mode for digital TV standard. This feature affects EPG
−
           Author to put in ASF comments.
+
           information and subtitles.
−
       --sout-asf-copyright=<string>
+
       --ts-extra-pmt=<string>   Extra PMT
−
                                 Copyright
+
           Allows a user to specify an extra pmt
−
           Copyright string to put in ASF comments.
+
          (pmt_pid=pid:stream_type[,...]).
−
       --sout-asf-comment=<string>
+
      --ts-trust-pcr, --no-ts-trust-pcr
−
                                Comment
+
                                Trust in-stream PCR
−
           Comment to put in ASF comments.
+
                                (default enabled)
−
       --sout-asf-rating=<string> Rating
+
          Use the stream PCR as a reference.
−
           "Rating" to put in ASF comments.
+
       --ts-es-id-pid, --no-ts-es-id-pid
−
       --sout-asf-packet-size=<integer>
+
                                Set id of ES to PID
−
                                Packet Size
+
                                 (default enabled)
−
           ASF packet size -- default is 4096 bytes
+
           Set the internal ID of each elementary stream handled by VLC to the
−
       --sout-asf-bitrate-override=<integer>
+
          same value as the PID in the TS stream, instead of 1, 2, 3, etc.
−
                                 Bitrate override
+
          Useful to do '#duplicate{..., select="es=<pid>"}'.
−
           Do not try to guess ASF bitrate. Setting this, allows you to control
+
       --ts-csa-ck=<string>       CSA Key
−
           how Windows Media Player will cache streamed content. Set to
+
          CSA encryption key. This must be a 16 char string (8 hexadecimal
−
           audio+video bitrate in bytes
+
           bytes).
 +
       --ts-csa2-ck=<string>     Second CSA Key
 +
           The even CSA encryption key. This must be a 16 char string (8
 +
          hexadecimal bytes).
 +
       --ts-csa-pkt=<integer>     Packet size in bytes to decrypt
 +
           Specify the size of the TS packet to decrypt. The decryption routines
 +
          subtract the TS-header from the value before decrypting.
 +
      --ts-split-es, --no-ts-split-es
 +
                                Separate sub-streams
 +
                                (default enabled)
 +
          Separate teletex/dvbs pages into independent ES. It can be useful to
 +
          turn off this option when using stream output.
 +
       --ts-seek-percent, --no-ts-seek-percent
 +
                                Seek based on percent not time
 +
                                 (default disabled)
 +
           Seek and position based on a percent byte position, not a PCR
 +
          generated time position. If seeking doesn't work property, turn on
 +
          this option.
 +
      --ts-cc-check, --no-ts-cc-check
 +
                                Check packets continuity counter
 +
                                (default enabled)
 +
           Detect discontinuities and drop packet duplicates. (bluRay sources
 +
           are known broken and have false positives).
  
−
  MSN Now-Playing
+
  Text subtitle parser (subtitle)
−
       --msn-format=<string>      Title format string
+
      --sub-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
           Format of the string to send to MSN {0} Artist, {1} Title, {2} Album.
+
                                Frames per Second
−
           Defaults to "Artist - Title" ({0} - {1}).
+
          Override the normal frames per second settings. This will only work
 +
          with MicroDVD and SubRIP (SRT) subtitles.
 +
       --sub-delay=<integer>      Subtitle delay
 +
           Apply a delay to all subtitles (in 1/10s, eg 100 means 10s).
 +
      --sub-type={auto,microdvd,subrip,subviewer,ssa1,ssa2-4,ass,vplayer,sami,dvdsubtitle,mpl2,aqt,pjs,mpsub,jacosub,psb,realtext,dks,subviewer1,sbv}  
 +
                                Subtitle format
 +
          Force the subtiles format. Selecting "auto" means autodetection and
 +
           should always work.
 +
      --sub-description=<string> Subtitle description
 +
          Override the default track description.
  
−
  Motion blur filter
+
  Raw video demuxer (rawvid)
−
       --blur-factor=<integer [1 .. 127]>
+
       --rawvid-fps=<string>      Frames per Second
−
                                 Blur factor (1-127)
+
          This is the desired frame rate when playing raw video streams. In the
−
           The degree of blurring from 1 to 127.
+
          form 30000/1001 or 29.97
 +
      --rawvid-width=<integer>  Width
 +
          This specifies the width in pixels of the raw video stream.
 +
      --rawvid-height=<integer>  Height
 +
          This specifies the height in pixels of the raw video stream.
 +
      --rawvid-chroma=<string>  Force chroma (Use carefully)
 +
          Force chroma. This is a four character string.
 +
      --rawvid-aspect-ratio=<string>  
 +
                                 Aspect ratio
 +
          Aspect ratio (4:3, 16:9). Default assumes square pixels.
 +
 
 +
DV (Digital Video) demuxer (rawdv)
 +
      --rawdv-hurry-up, --no-rawdv-hurry-up
 +
                                Hurry up
 +
                                (default disabled)
 +
           The demuxer will advance timestamps if the input can't keep up with
 +
          the rate.
  
−
  Mosaic video sub filter
+
  Raw audio demuxer (rawaud)
−
      --mosaic-alpha=<integer [0 .. 255]>
+
       --rawaud-channels=<integer>  
−
                                Transparency
+
                                 Audio channels
−
          Transparency of the mosaic foreground pictures. 0 means transparent,
+
           Audio channels in input stream. Numeric value >0. Default is 2.
−
          255 opaque (default).
+
       --rawaud-samplerate=<integer>  
−
       --mosaic-height=<integer> Height
+
                                 Audio samplerate (Hz)
−
          Total height of the mosaic, in pixels.
+
           Audio sample rate in Hertz. Default is 48000 Hz.
−
      --mosaic-width=<integer>  Width
+
       --rawaud-fourcc=<string>   FOURCC code of raw input format
−
          Total width of the mosaic, in pixels.
+
           FOURCC code of the raw input format. This is a four character string.
−
      --mosaic-align={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
       --rawaud-lang=<string>     Forces the audio language
−
                                 Mosaic alignment
+
           Forces the audio language for the output mux. Three letter ISO639
−
           You can enforce the mosaic alignment on the video (0=center, 1=left,
+
           code. Default is 'eng'.
−
          2=right, 4=top, 8=bottom, you can also use combinations of these
 
−
          values, eg 6 = top-right).
 
−
      --mosaic-xoffset=<integer> Top left corner X coordinate
 
−
          X Coordinate of the top-left corner of the mosaic.
 
−
      --mosaic-yoffset=<integer> Top left corner Y coordinate
 
−
          Y Coordinate of the top-left corner of the mosaic.
 
−
      --mosaic-borderw=<integer> Border width
 
−
          Width in pixels of the border between miniatures.
 
−
      --mosaic-borderh=<integer> Border height
 
−
          Height in pixels of the border between miniatures.
 
−
      --mosaic-position={0 (auto), 1 (fixed), 2 (offsets)}
 
−
                                Positioning method
 
−
          Positioning method for the mosaic. auto: automatically choose the
 
−
          best number of rows and columns. fixed: use the user-defined number
 
−
          of rows and columns. offsets: use the user-defined offsets for each
 
−
          image.
 
−
      --mosaic-rows=<integer>    Number of rows
 
−
          Number of image rows in the mosaic (only used if positionning method
 
−
          is set to "fixed").
 
−
       --mosaic-cols=<integer>   Number of columns
 
−
          Number of image columns in the mosaic (only used if positionning
 
−
          method is set to "fixed".
 
−
      --mosaic-keep-aspect-ratio, --no-mosaic-keep-aspect-ratio
 
−
                                 Keep aspect ratio (default disabled)
 
−
           Keep the original aspect ratio when resizing mosaic elements.
 
−
          (default disabled)
 
−
      --mosaic-keep-picture, --no-mosaic-keep-picture
 
−
                                Keep original size (default disabled)
 
−
          Keep the original size of mosaic elements. (default disabled)
 
−
       --mosaic-order=<string>   Elements order
 
−
           You can enforce the order of the elements on the mosaic. You must
 
−
          give a comma-separated list of picture ID(s).These IDs are assigned
 
−
          in the "mosaic-bridge" module.
 
−
       --mosaic-offsets=<string> Offsets in order
 
−
          You can enforce the (x,y) offsets of the elements on the mosaic (only
 
−
          used if positioning method is set to "offsets"). You must give a
 
−
          comma-separated list of coordinates (eg: 10,10,150,10).
 
−
      --mosaic-delay=<integer>  Delay
 
−
           Pictures coming from the mosaic elements will be delayed according to
 
−
          this value (in milliseconds). For high values you will need to raise
 
−
          caching at input.
 
−
</nowiki>
 
−
Part 2/2
 
−
<nowiki>
 
−
Audio filter for stereo to mono conversion
 
−
      --sout-mono-downmix, --no-sout-mono-downmix
 
−
                                Use downmix algorithm (default enabled)
 
−
          This option selects a stereo to mono downmix algorithm that is used
 
−
          in the headphone channel mixer. It gives the effect of standing in a
 
−
           room full of speakers. (default enabled)
 
−
      --sout-mono-channel={0 (Left), 1 (Right), 2 (Left rear), 4 (Right rear), 8 (Center), 5 (Left front)}
 
−
                                Select channel to keep
 
−
          This option silences all other channels except the selected channel.
 
−
          Choose one from (0=left, 1=right, 2=rear left, 3=rear right,
 
−
          4=center, 5=left front)
 
  
−
  MOD demuxer (libmodplug)
+
MPEG-PS demuxer (ps)
−
       --mod-noisereduction, --no-mod-noisereduction
+
      --ps-trust-timestamps, --no-ps-trust-timestamps
−
                                 Noise reduction (default enabled)
+
                                Trust MPEG timestamps
−
           Enable noise reduction algorithm. (default enabled)
+
                                (default enabled)
−
       --mod-reverb, --no-mod-reverb
+
          Normally we use the timestamps of the MPEG files to calculate
−
                                 Reverb (default disabled)
+
          position and duration. However sometimes this might not be usable.
−
           Enable reverberation (default disabled)
+
          Disable this option to calculate from the bitrate instead.
−
       --mod-reverb-level=<integer [0 .. 100]>
+
 
 +
Playlist (playlist)
 +
      --playlist-skip-ads, --no-playlist-skip-ads
 +
                                Skip ads
 +
                                (default enabled)
 +
          Use playlist options usually used to prevent ads skipping to detect
 +
          ads and prevent adding them to the playlist.
 +
      --shoutcast-show-adult, --no-shoutcast-show-adult
 +
                                Show shoutcast adult content
 +
                                (default disabled)
 +
          Show NC17 rated video streams when using shoutcast video playlists.
 +
 
 +
MP4 stream demuxer (mp4)
 +
 
 +
Hacks
 +
      --mp4-m4a-audioonly, --no-mp4-m4a-audioonly
 +
                                M4A audio only
 +
                                (default disabled)
 +
          Ignore non audio tracks from iTunes audio files
 +
 
 +
  MOD demuxer (libmodplug) (mod)
 +
       --mod-noisereduction, --no-mod-noisereduction  
 +
                                 Noise reduction
 +
                                (default enabled)
 +
           Enable noise reduction algorithm.
 +
       --mod-reverb, --no-mod-reverb  
 +
                                 Reverb
 +
                                (default disabled)
 +
           Enable reverberation
 +
       --mod-reverb-level=<integer [0 .. 100]>  
 
                                 Reverberation level
 
                                 Reverberation level
 
           Reverberation level (from 0 to 100, default value is 0).
 
           Reverberation level (from 0 to 100, default value is 0).
−
       --mod-reverb-delay=<integer [0 .. 1000]>
+
       --mod-reverb-delay=<integer [0 .. 1000]>  
 
                                 Reverberation delay
 
                                 Reverberation delay
−
           Reverberation delay, in ms. Usual values are from to 40 to 200ms.
+
           Reverberation delay, in ms. Usual values are from 40 to 200ms.
−
       --mod-megabass, --no-mod-megabass
+
       --mod-megabass, --no-mod-megabass  
−
                                 Mega bass (default disabled)
+
                                 Mega bass
−
           Enable megabass mode (default disabled)
+
                                (default disabled)
−
       --mod-megabass-level=<integer [0 .. 100]>
+
           Enable megabass mode
 +
       --mod-megabass-level=<integer [0 .. 100]>  
 
                                 Mega bass level
 
                                 Mega bass level
 
           Megabass mode level (from 0 to 100, default value is 0).
 
           Megabass mode level (from 0 to 100, default value is 0).
−
       --mod-megabass-range=<integer [10 .. 100]>
+
       --mod-megabass-range=<integer [10 .. 100]>  
 
                                 Mega bass cutoff
 
                                 Mega bass cutoff
 
           Megabass mode cutoff frequency, in Hz. This is the maximum frequency
 
           Megabass mode cutoff frequency, in Hz. This is the maximum frequency
 
           for which the megabass effect applies. Valid values are from 10 to
 
           for which the megabass effect applies. Valid values are from 10 to
 
           100 Hz.
 
           100 Hz.
−
       --mod-surround, --no-mod-surround
+
       --mod-surround, --no-mod-surround  
−
                                 Surround (default disabled)
+
                                 Surround
−
           Surround (default disabled)
+
                                (default disabled)
−
       --mod-surround-level=<integer [0 .. 100]>
+
           Surround
 +
       --mod-surround-level=<integer [0 .. 100]>  
 
                                 Surround level
 
                                 Surround level
 
           Surround effect level (from 0 to 100, default value is 0).
 
           Surround effect level (from 0 to 100, default value is 0).
−
       --mod-surround-delay=<integer [0 .. 1000]>
+
       --mod-surround-delay=<integer [0 .. 1000]>  
 
                                 Surround delay (ms)
 
                                 Surround delay (ms)
 
           Surround delay, in ms. Usual values are from 5 to 40 ms.
 
           Surround delay, in ms. Usual values are from 5 to 40 ms.
  
−
  Matroska stream demuxer
+
  Matroska stream demuxer (mkv)
−
       --mkv-use-ordered-chapters, --no-mkv-use-ordered-chapters
+
       --mkv-use-ordered-chapters, --no-mkv-use-ordered-chapters  
−
                                 Ordered chapters (default enabled)
+
                                 Respect ordered chapters
−
           Play ordered chapters as specified in the segment. (default enabled)
+
                                (default enabled)
−
       --mkv-use-chapter-codec, --no-mkv-use-chapter-codec
+
           Play chapters in the order specified in the segment.
−
                                 Chapter codecs (default enabled)
+
       --mkv-use-chapter-codec, --no-mkv-use-chapter-codec  
−
           Use chapter codecs found in the segment. (default enabled)
+
                                 Chapter codecs
−
       --mkv-preload-local-dir, --no-mkv-preload-local-dir
+
                                (default enabled)
−
                                 Preload Directory (default disabled)
+
           Use chapter codecs found in the segment.
−
           Preload matroska files from the same family in the same directory
+
       --mkv-preload-local-dir, --no-mkv-preload-local-dir  
−
           (not good for broken files). (default disabled)
+
                                 Preload MKV files in the same directory
−
       --mkv-seek-percent, --no-mkv-seek-percent
+
                                (default enabled)
−
                                 Seek based on percent not time (default
+
           Preload matroska files in the same directory to find linked segments
−
                                disabled)
+
           (not good for broken files).
−
           Seek based on percent not time. (default disabled)
+
       --mkv-seek-percent, --no-mkv-seek-percent  
−
       --mkv-use-dummy, --no-mkv-use-dummy
+
                                 Seek based on percent not time
−
                                 Dummy Elements (default disabled)
+
                                (default disabled)
 +
           Seek based on percent not time.
 +
       --mkv-use-dummy, --no-mkv-use-dummy  
 +
                                 Dummy Elements
 +
                                (default disabled)
 
           Read and discard unknown EBML elements (not good for broken files).
 
           Read and discard unknown EBML elements (not good for broken files).
−
          (default disabled)
+
      --mkv-preload-clusters, --no-mkv-preload-clusters
 +
                                Preload clusters
 +
                                (default disabled)
 +
          Find all cluster positions by jumping cluster-to-cluster before
 +
          playback
  
−
  M-JPEG camera demuxer
+
  M-JPEG camera demuxer (mjpeg)
−
       --mjpeg-fps=<float>       Frames per Second
+
       --mjpeg-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 +
                                Frames per Second
 
           This is the desired frame rate when playing MJPEG from a file. Use 0
 
           This is the desired frame rate when playing MJPEG from a file. Use 0
 
           (this is the default value) for a live stream (from a camera).
 
           (this is the default value) for a live stream (from a camera).
  
−
  Mirror video filter
+
  Image demuxer (image)
−
Splits video in two same parts, like in a mirror
+
      --image-id=<integer>      ES ID
−
       --mirror-split={0 (Vertical), 1 (Horizontal)}
+
          Set the ID of the elementary stream
−
                                 Mirror orientation
+
       --image-group=<integer>    Group
−
           Defines orientation of the mirror splitting.     Can be vertical or
+
          Set the group of the elementary stream
−
           horizontal
+
      --image-decode, --no-image-decode
−
       --mirror-direction={0 (Left to right/Top to bottom), 1 (Right to left/Bottom to top)}
+
                                Decode
−
                                 Direction
+
                                (default enabled)
−
           Direction of the mirroring
+
          Decode at the demuxer stage
 +
      --image-chroma=<string>    Forced chroma
 +
          If non empty and image-decode is true, the image will be converted to
 +
          the specified chroma.
 +
      --image-duration=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                 Duration in seconds
 +
           Duration in seconds before simulating an end of file. A negative
 +
           value means an unlimited play time.
 +
       --image-fps=<string>      Frame rate
 +
          Frame rate of the elementary stream produced.
 +
      --image-realtime, --no-image-realtime
 +
                                Real-time
 +
                                (default disabled)
 +
          Use real-time mode suitable for being used as a master input and
 +
          real-time input slaves.
 +
 
 +
H264 video demuxer (h26x)
 +
      --h264-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Frames per Second
 +
          Desired frame rate for the stream.
 +
      --hevc-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                 Frames per Second
 +
           Desired frame rate for the stream.
  
−
  Marquee display
+
  MPEG-I/II/4 / A52 / DTS / MLP audio (es)
−
Display text above the video
+
       --es-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
       --marq-marquee=<string>    Text
+
                                Frames per Second
−
          Marquee text to display. (Available format strings: Time related: %Y
+
           This is the frame rate used as a fallback when playing MPEG video
−
          = year, %m = month, %d = day, %H = hour, %M = minute, %S = second,
+
           elementary streams.
−
          ... Meta data related: $a = artist, $b = album, $c = copyright, $d =
+
 
−
          description, $e = encoded by, $g = genre, $l = language, $n = track
+
File dumper (demuxdump)
−
           num, $p = now playing, $r = rating, $s = subtitles language, $t =
+
       --demuxdump-access={any,file,dummy,ftp,http,access_output_livehttp,access_output_shout,udp,stream_out_chromecast,avcodec,none}  
−
           title, $u = url, $A = date, $B = audio bitrate (in kb/s), $C =
+
                                 Dump module
−
          chapter,$D = duration, $F = full name with path, $I = title, $L =
+
           Dump module
−
          time left, $N = name, $O = audio language, $P = position (in %), $R =
+
       --demuxdump-file=<string> Dump filename
−
          rate, $S = audio sample rate (in kHz), $T = time, $U = publisher, $V
+
           Name of the file to which the raw stream will be dumped.
−
          = volume, $_ = new line)
+
       --demuxdump-append, --no-demuxdump-append
−
  Position:
+
                                Append to existing file
−
       --marq-x=<integer>        X offset
+
                                (default disabled)
−
          X offset, from the left screen edge.
+
           If the file already exists, it will not be overwritten.
−
      --marq-y=<integer>        Y offset
 
−
          Y offset, down from the top.
 
−
      --marq-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
 
−
                                 Marquee position
 
−
          You can enforce the marquee position on the video (0=center, 1=left,
 
−
           2=right, 4=top, 8=bottom, you can also use combinations of these
 
−
          values, eg 6 = top-right).
 
−
  Font:
 
−
       --marq-opacity=<integer [0 .. 255]>
 
−
                                Opacity
 
−
           Opacity (inverse of transparency) of overlayed text. 0 = transparent,
 
−
          255 = totally opaque.
 
−
      --marq-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
 
−
                                Color
 
−
          Color of the text that will be rendered on the video. This must be an
 
−
          hexadecimal (like HTML colors). The first two chars are for red, then
 
−
          green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
 
−
          #FFFF00 = yellow (red + green), #FFFFFF = white
 
−
       --marq-size=<integer>      Font size, pixels
 
−
          Font size, in pixels. Default is -1 (use default font size).
 
−
  Misc:
 
−
      --marq-timeout=<integer>  Timeout
 
−
          Number of milliseconds the marquee must remain displayed. Default
 
−
          value is 0 (remains forever).
 
−
      --marq-refresh=<integer>  Refresh period in ms
 
−
           Number of milliseconds between string updates. This is mainly useful
 
−
          when using meta data or time format string sequences.
 
  
−
  Interfaces implemented using lua scripts
+
  AVI demuxer (avi)
−
       --lua-intf=<string>        Lua interface
+
       --avi-interleaved, --no-avi-interleaved
−
           Lua interface module to load
+
                                Force interleaved method
−
       --lua-config=<string>      Lua interface configuration
+
                                (default disabled)
−
          Lua interface configuration string. Format is: '["<interface module
+
           Force interleaved method
−
          name>"] = { <option> = <value>, ...}, ...'.
+
       --avi-index={0 (Ask for action), 1 (Always fix), 2 (Never fix), 3 (Fix when necessary)}  
−
  Lua HTTP:
+
                                Force index creation
−
      --http-host=<string>      Host address
+
           Recreate a index for the AVI file. Use this if your AVI file is
−
           Address and port the HTTP interface will listen on. It defaults to
+
           damaged or incomplete (not seekable).
−
           all network interfaces (0.0.0.0). If you want the HTTP interface to
+
 
−
          be available only on the local machine, enter 127.0.0.1
+
Unified adaptive streaming for DASH/HLS (adaptive)
−
       --http-src=<string>        Source directory
+
       --adaptive-logic={,predictive,nearoptimal,rate,fixedrate,lowest,highest}
−
          Source directory
+
                                 Adaptive Logic
−
      --http-index, --no-http-index
+
       --adaptive-maxwidth=<integer>  
−
                                 Directory index (default disabled)
+
                                Maximum device width
−
          Allow to build directory index (default disabled)
+
           Maximum device width
−
  Lua RC:
+
       --adaptive-maxheight=<integer>  
−
       --rc-host=<string>         TCP command input
+
                                Maximum device height
−
          Accept commands over a socket rather than stdin. You can set the
+
           Maximum device height
−
           address and port the interface will bind to.
+
       --adaptive-bw=<integer>    Fixed Bandwidth in KiB/s
−
  Lua Telnet:
+
           Preferred bandwidth for non adaptive streams
−
       --telnet-host=<string>     Host
+
       --adaptive-use-access, --no-adaptive-use-access
−
          This is the host on which the interface will listen. It defaults to
+
                                Use regular HTTP modules
−
           all network interfaces (0.0.0.0). If you want this interface to be
+
                                (default disabled)
−
          available only on the local machine, enter "127.0.0.1".
+
          Connect using HTTP access instead of custom HTTP code
−
       --telnet-port=<integer>    Port
 
−
           This is the TCP port on which this interface will listen. It defaults
 
−
          to 4212.
 
−
       --telnet-password=<string> Password
 
−
          A single administration password is used to protect this interface.
 
−
          The default value is "admin".
 
−
      --lua-sd=<string>          (null)
 
−
      --lua-longname=<string>    (null)
 
  
−
  Logo sub filter
+
  Direct3D9 adjust filter (d3d9_filters)
−
Use a local picture as logo on the video
+
       --contrast=<float [0.000000 .. 2.000000]>  
−
       --logo-file=<string>       Logo filenames
+
                                Image contrast (0-2)
−
           Full path of the image files to use. Format is <image>[,<delay in
+
           Set the image contrast, between 0 and 2. Defaults to 1.
−
          ms>[,<alpha>]][;<image>[,<delay>[,<alpha>]]][;...]. If you only have
+
      --brightness=<float [0.000000 .. 2.000000]>
−
           one file, simply enter its filename.
+
                                Image brightness (0-2)
−
       --logo-x=<integer>        X coordinate
+
           Set the image brightness, between 0 and 2. Defaults to 1.
−
          X coordinate of the logo. You can move the logo by left-clicking it.
+
       --hue=<float [-180.000000 .. 180.000000]>
−
      --logo-y=<integer>        Y coordinate
+
                                Image hue (0-360)
−
           Y coordinate of the logo. You can move the logo by left-clicking it.
+
           Set the image hue, between 0 and 360. Defaults to 0.
−
       --logo-delay=<integer>     Logo individual image time in ms
+
       --saturation=<float [0.000000 .. 3.000000]>  
−
          Individual image display time of 0 - 60000 ms.
+
                                Image saturation (0-3)
−
      --logo-repeat=<integer>    Logo animation # of loops
+
           Set the image saturation, between 0 and 3. Defaults to 1.
−
           Number of loops for the logo animation.-1 = continuous, 0 = disabled
+
       --gamma=<float [0.010000 .. 10.000000]>  
−
       --logo-opacity=<integer [0 .. 255]>
+
                                 Image gamma (0-10)
−
                                 Opacity of the logo
+
           Set the image gamma, between 0.01 and 10. Defaults to 1.
−
           Logo opacity value (from 0 for full transparency to 255 for full
+
       --brightness-threshold, --no-brightness-threshold
−
          opacity).
+
                                 Brightness threshold
−
       --logo-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
                                (default disabled)
−
                                 Logo position
+
           When this mode is enabled, pixels will be shown as black or white.
−
          Enforce the logo position on the video (0=center, 1=left, 2=right,
+
           The threshold value will be the brightness defined below.
−
           4=top, 8=bottom, you can also use combinations of these values, eg 6
 
−
           = top-right).
 
  
−
  File logging
+
  Direct3D11 adjust filter (d3d11_filters)
−
       --logfile=<string>         Log filename
+
       --contrast=<float [0.000000 .. 2.000000]>  
−
           Specify the log filename.
+
                                Image contrast (0-2)
−
       --logmode={text,html}      Log format
+
           Set the image contrast, between 0 and 2. Defaults to 1.
−
           Specify the log format. Available choices are "text" (default) and
+
       --brightness=<float [0.000000 .. 2.000000]>
−
           "html".
+
                                Image brightness (0-2)
−
       --log-verbose=<integer>   Verbosity
+
          Set the image brightness, between 0 and 2. Defaults to 1.
−
           Select the verbosity to use for log or -1 to use the same verbosity
+
      --hue=<float [-180.000000 .. 180.000000]>
−
          given by --verbose.
+
                                Image hue (0-360)
 +
           Set the image hue, between 0 and 360. Defaults to 0.
 +
      --saturation=<float [0.000000 .. 3.000000]>
 +
                                Image saturation (0-3)
 +
           Set the image saturation, between 0 and 3. Defaults to 1.
 +
       --gamma=<float [0.010000 .. 10.000000]>  
 +
                                Image gamma (0-10)
 +
           Set the image gamma, between 0.01 and 10. Defaults to 1.
 +
      --brightness-threshold, --no-brightness-threshold
 +
                                Brightness threshold
 +
                                (default disabled)
 +
          When this mode is enabled, pixels will be shown as black or white.
 +
          The threshold value will be the brightness defined below.
  
−
  RTP/RTSP/SDP demuxer (using Live555)
+
  Remote control interface (oldrc)
−
       --rtsp-tcp, --no-rtsp-tcp  Use RTP over RTSP (TCP) (default disabled)
+
       --rc-show-pos, --no-rc-show-pos
−
          Use RTP over RTSP (TCP) (default disabled)
+
                                 Show stream position
−
      --rtp-client-port=<integer>
+
                                 (default disabled)
−
                                Client port
+
           Show the current position in seconds within the stream from time to
−
          Port to use for the RTP source of the session
+
           time.
−
      --rtsp-mcast, --no-rtsp-mcast
+
       --rc-quiet, --no-rc-quiet  Do not open a DOS command box interface
−
                                Force multicast RTP via RTSP (default
+
                                 (default disabled)
−
                                disabled)
+
           By default the rc interface plugin will start a DOS command box.
−
          Force multicast RTP via RTSP (default disabled)
+
           Enabling the quiet mode will not bring this command box but can also
−
      --rtsp-http, --no-rtsp-http
+
           be pretty annoying when you want to stop VLC and no video window is
−
                                 Tunnel RTSP and RTP over HTTP (default
+
           open.
−
                                 disabled)
+
       --rc-host=<string>         TCP command input
−
          Tunnel RTSP and RTP over HTTP (default disabled)
+
           Accept commands over a socket rather than stdin. You can set the
−
      --rtsp-http-port=<integer> HTTP tunnel port
+
           address and port the interface will bind to.
−
           Port to use for tunneling the RTSP/RTP over HTTP.
 
−
      --rtsp-caching=<integer>  Caching value (ms)
 
−
          Allows you to modify the default caching value for RTSP streams. This
 
−
           value should be set in millisecond units.
 
−
       --rtsp-kasenna, --no-rtsp-kasenna
 
−
                                 Kasenna RTSP dialect (default disabled)
 
−
           Kasenna servers use an old and nonstandard dialect of RTSP. With this
 
−
           parameter VLC will try this dialect, but then it cannot connect to
 
−
           normal RTSP servers. (default disabled)
 
−
      --rtsp-wmserver, --no-rtsp-wmserver
 
−
                                WMServer RTSP dialect (default disabled)
 
−
           WMServer uses an unstandard dialect of RTSP. Selecting this parameter
 
−
          will tell VLC to assume some options contrary to RFC 2326 guidelines.
 
−
          (default disabled)
 
−
       --rtsp-user=<string>       RTSP user name
 
−
          Sets the username for the connection, if no username or password are
 
−
           set in the url.
 
−
      --rtsp-pwd=<string>        RTSP password
 
−
          Sets the password for the connection, if no username or password are
 
−
           set in the url.
 
  
−
  Kate overlay decoder
+
  Windows Service interface (ntservice)
−
Kate is a codec for text and image based overlays.
+
       --ntservice-install, --no-ntservice-install
−
The Tiger rendering library is needed to render complex Kate streams, but VLC can still render static text and image based subtitles if it is not available.
+
                                Install Windows Service
−
Note that changing settings below will not take effect until a new stream is played. This will hopefully be fixed soon.
+
                                 (default disabled)
−
       --kate-formatted, --no-kate-formatted
+
           Install the Service and exit.
−
                                 Formatted Subtitles (default enabled)
+
      --ntservice-uninstall, --no-ntservice-uninstall
−
           Kate streams allow for text formatting. VLC partly implements this,
+
                                Uninstall Windows Service
−
          but you can choose to disable all formatting.Note that this has no
+
                                (default disabled)
−
          effect is rendering via Tiger is enabled. (default enabled)
+
           Uninstall the Service and exit.
−
 
+
       --ntservice-name=<string>  Display name of the Service
−
Memory video decoder
+
           Change the display name of the Service.
−
      --invmem-width=<integer>  Width
+
       --ntservice-options=<string>  
−
           Video memory buffer width.
+
                                Configuration options
−
       --invmem-height=<integer>  Height
+
           Configuration options that will be used by the Service (eg. --foo=bar
−
           Video memory buffer height.
+
           --no-foobar). It should be specified at install time so the Service
−
       --invmem-lock=<string>     Lock function
+
           is properly configured.
−
          Address of the locking callback function. This function must return a
+
       --ntservice-extraintf=<string>  
−
           valid memory address for use by the video renderer.
+
                                Extra interface modules
−
      --invmem-unlock=<string>  Unlock function
+
          Additional interfaces spawned by the Service. It should be specified
−
           Address of the unlocking callback function
+
           at install time so the Service is properly configured. Use a comma
−
      --invmem-data=<string>    Callback data
+
          separated list of interface modules. (common values are: logger, sap,
−
           Data for the locking and unlocking functions
+
           rc, http)
−
       --invmem-chroma=<string>   Chroma
 
−
           Output chroma for the memory image as a 4-character string, eg.
 
−
           "RV32".
 
  
−
  Hotkeys management interface
+
  Network synchronization (netsync)
−
       --hotkeys-mousewheel-mode={0 (Volume Control), 1 (Position Control), 2 (Ignore)}
+
       --netsync-master, --no-netsync-master
−
                                 MouseWheel x-axis Control
+
                                Network master clock
−
           MouseWheel x-axis can control volume, position or mousewheel event
+
                                (default disabled)
−
           can be ignored
+
          When set, this VLC instance will act as the master clock for
 +
          synchronization for clients listening
 +
      --netsync-master-ip=<string>
 +
                                 Master server IP address
 +
          The IP address of the network master clock to use for clock
 +
           synchronization.
 +
      --netsync-timeout=<integer>
 +
                                UDP timeout (in ms)
 +
           Length of time (in ms) until aborting data reception.
  
−
  Headphone virtual spatialization effect
+
  Mouse gestures control interface (gestures)
−
This effect gives you the feeling that you are standing in a room with a complete 7.1 speaker set when using only a headphone, providing a more realistic sound experience. It should also be more comfortable and less tiring when listening to music for long periods of time.
+
       --gestures-threshold=<integer>  
−
It works with any source format from mono to 7.1.
+
                                 Motion threshold (10-100)
−
       --headphone-dim=<integer> Characteristic dimension
+
           Amount of movement required for a mouse gesture to be recorded.
−
          Distance between front left speaker and listener in meters.
+
       --gestures-button={left,middle,right}
−
      --headphone-compensate, --no-headphone-compensate
+
                                 Trigger button
−
                                 Compensate delay (default disabled)
+
           Trigger button for mouse gestures.
−
           The delay which is introduced by the physical algorithm may sometimes
 
−
          be disturbing for the synchronization between lips-movement and
 
−
          speech. In case, turn this on to compensate. (default disabled)
 
−
       --headphone-dolby, --no-headphone-dolby
 
−
                                 No decoding of Dolby Surround (default
 
−
                                disabled)
 
−
           Dolby Surround encoded streams won't be decoded before being
 
−
          processed by this filter. Enabling this setting is not recommended.
 
−
          (default disabled)
 
  
−
  H264 video demuxer
+
  Dummy interface (dummy)
−
       --h264-fps=<float>        Frames per Second
+
       --dummy-quiet, --no-dummy-quiet
−
           Desired frame rate for the H264 stream.
+
                                Do not open a DOS command box interface
 +
                                (default disabled)
 +
           By default the dummy interface plugin will start a DOS command box.
 +
          Enabling the quiet mode will not bring this command box but can also
 +
          be pretty annoying when you want to stop VLC and no video window is
 +
          open.
  
−
  Gradient video filter
+
  VBI and Teletext decoder (zvbi)
−
Apply color gradient or edge detection effects
+
      --vbi-page=<integer [0 .. 7995392]>
−
       --gradient-mode={gradient,edge,hough}
+
                                Teletext page
−
                                 Distort mode
+
          Open the indicated Teletext page. Default page is index 100.
−
           Distort mode, one of "gradient", "edge" and "hough".
+
       --vbi-opaque, --no-vbi-opaque
−
       --gradient-type=<integer [0 .. 1]>
+
                                 Opacity
−
                                 Gradient image type
+
                                (default disabled)
−
           Gradient image type (0 or 1). 0 will turn the image to white while 1
+
           Setting to true makes the text to be boxed and maybe easier to read.
−
           will keep colors.
+
       --vbi-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
−
       --gradient-cartoon, --no-gradient-cartoon
+
                                 Teletext alignment
−
                                 Apply cartoon effect (default enabled)
+
           You can enforce the teletext position on the video (0=center, 1=left,
−
           Apply cartoon effect. It is only used by "gradient" and "edge".
+
          2=right, 4=top, 8=bottom, you can also use combinations of these
−
          (default enabled)
+
           values, eg. 6 = top-right).
 +
       --vbi-text, --no-vbi-text  Teletext text subtitles
 +
                                 (default disabled)
 +
           Output teletext subtitles as text instead of as RGBA.
 +
      --vbi-level={0 (1), 1 (1.5), 2 (2.5), 3 (3.5)}
 +
                                Presentation Level
  
−
  Goom effect
+
  H.264/MPEG-4 Part 10/AVC encoder (x264) (x264)
−
       --goom-width=<integer>     Goom display width
+
       --sout-x264-keyint=<integer>  
−
           This allows you to set the resolution of the Goom display (bigger
+
                                Maximum GOP size
−
           resolution will be prettier but more CPU intensive).
+
           Sets maximum interval between IDR-frames. Larger values save bits,
−
       --goom-height=<integer>   Goom display height
+
           thus improving quality for a given bitrate at the cost of seeking
−
          This allows you to set the resolution of the Goom display (bigger
+
          precision. Use -1 for infinite.
−
           resolution will be prettier but more CPU intensive).
+
       --sout-x264-min-keyint=<integer>  
−
      --goom-speed=<integer>    Goom animation speed
+
                                Minimum GOP size
−
           This allows you to set the animation speed (between 1 and 10,
+
           Sets minimum interval between IDR-frames. In H.264, I-frames do not
−
           defaults to 6).
+
          necessarily bound a closed GOP because it is allowable for a P-frame
−
 
+
           to be predicted from more frames than just the one frame before it
−
GnuTLS transport layer security
+
          (also see reference frame option). Therefore, I-frames are not
−
      --gnutls-cache-timeout=<integer>
+
           necessarily seekable. IDR-frames restrict subsequent P-frames from
−
                                Expiration time for resumed TLS sessions
+
          referring to any frame prior to the IDR-frame. If scenecuts appear
−
          It is possible to cache the resumed TLS sessions. This is the
+
           within this interval, they are still encoded as I-frames, but do not
−
           expiration time of the sessions stored in this cache, in seconds.
+
           start a new GOP.
−
      --gnutls-cache-size=<integer>
+
       --sout-x264-opengop, --no-sout-x264-opengop
−
                                Number of resumed TLS sessions
+
                                Use recovery points to close GOPs
−
           This is the maximum number of resumed TLS sessions that the cache
+
                                 (default disabled)
−
          will hold.
+
           use open GOP, for bluray compatibility use also bluray-compat option
−
 
+
       --sout-x264-bluray-compat, --no-sout-x264-bluray-compat
−
Mouse gestures control interface
+
                                Enable compatibility hacks for Blu-ray support
−
       --gestures-threshold=<integer>
+
                                 (default disabled)
−
                                 Motion threshold (10-100)
+
           Enable hacks for Blu-ray support, this doesn't enforce every aspect
−
           Amount of movement required for a mouse gesture to be recorded.
+
          of Blu-ray compatibility e.g. resolution, framerate, level
−
       --gestures-button={left,middle,right}
+
       --sout-x264-scenecut=<integer [-1 .. 100]>  
−
                                 Trigger button
+
                                 Extra I-frames aggressivity
−
           Trigger button for mouse gestures.
+
           Scene-cut detection. Controls how aggressively to insert extra
−
 
+
           I-frames. With small values of scenecut, the codec often has to force
−
Gaussian blur video filter
+
          an I-frame when it would exceed keyint. Good values of scenecut may
−
Add a blurring effect
+
           find a better location for the I-frame. Large values use more
−
       --gaussianblur-sigma=<float>
+
          I-frames than necessary, thus wasting bits. -1 disables scene-cut
−
                                 Gaussian's std deviation
+
          detection, so I-frames are inserted only every other keyint frames,
−
           Gaussian's standard deviation. The bluring will take into account
+
           which probably leads to ugly encoding artifacts. Range 1 to 100.
−
           pixels up to 3*sigma away in any direction.
+
      --sout-x264-bframes=<integer [0 .. 16]>  
−
 
+
                                 B-frames between I and P
−
Freetype2 font renderer
+
           Number of consecutive B-frames between I and P-frames. Range 1 to 16.
−
      --freetype-font=<string>  Font
+
       --sout-x264-b-adapt=<integer [0 .. 2]>
−
           Fontfile for the font you want to use
+
                                Adaptive B-frame decision
−
      --freetype-fontsize=<integer>
+
          Force the specified number of consecutive B-frames to be used, except
−
                                Font size in pixels
+
          possibly before an I-frame. Range 0 to 2.
−
           This is the default size of the fonts that will be rendered on the
+
      --sout-x264-b-bias=<integer [-100 .. 100]>
−
          video. If set to something different than 0 this option will override
+
                                Influence (bias) B-frames usage
−
          the relative font size.
+
          Bias the choice to use B-frames. Positive values cause more B-frames,
−
      --freetype-opacity=<integer [0 .. 255]>
+
          negative values cause less B-frames.
−
                                 Opacity
+
      --sout-x264-bpyramid={none,strict,normal}  
−
           The opacity (inverse of transparency) of the text that will be
+
                                 Keep some B-frames as references
−
          rendered on the video. 0 = transparent, 255 = totally opaque.  
+
           Allows B-frames to be used as references for predicting other frames.
−
       --freetype-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
+
           Keeps the middle of 2+ consecutive B-frames as a reference, and
−
                                 Text default color
+
           reorders frame appropriately. - none: Disabled  - strict: Strictly
−
           The color of the text that will be rendered on the video. This must
+
           hierarchical pyramid  - normal: Non-strict (not Blu-ray compatible)  
−
           be an hexadecimal (like HTML colors). The first two chars are for
+
       --sout-x264-cabac, --no-sout-x264-cabac
−
           red, then green, then blue. #000000 = black, #FF0000 = red, #00FF00 =
+
                                CABAC
−
           green, #FFFF00 = yellow (red + green), #FFFFFF = white
+
                                (default enabled)
−
       --freetype-rel-fontsize={20 (Smaller), 18 (Small), 16 (Normal), 12 (Large), 6 (Larger)}
+
          CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows
−
                                Relative font size
+
           down encoding and decoding, but should save 10 to 15% bitrate.
−
           This is the relative default size of the fonts that will be rendered
+
       --sout-x264-fullrange, --no-sout-x264-fullrange
−
          on the video. If absolute font size is set, relative size will be
+
                                Use fullrange instead of TV colorrange
−
          overridden.
+
                                (default disabled)
−
       --freetype-effect={1 (Background), 2 (Outline), 3 (Fat Outline)}
+
           TV-range is usually used colorrange, defining this to true will
−
                                Font Effect
+
           enable libx264 to use full colorrange on encoding
−
           It is possible to apply effects to the rendered text to improve its
+
       --sout-x264-ref=<integer [1 .. 16]>
−
           readability.
+
                                 Number of reference frames
−
       --freetype-yuvp, --no-freetype-yuvp
+
           Number of previous frames used as predictors. This is effective in
−
                                 Use YUVP renderer (default disabled)
+
           Anime, but seems to make little difference in live-action source
−
           This renders the font using "paletized YUV". This option is only
+
          material. Some decoders are unable to deal with large frameref
−
           needed if you want to encode into DVB subtitles (default disabled)
+
          values. Range 1 to 16.
−
 
+
      --sout-x264-nf, --no-sout-x264-nf
−
Folder meta data
+
                                Skip loop filter
−
      --album-art-filename=<string>
+
                                 (default disabled)
−
                                 Album art filename
+
           Deactivate the deblocking loop filter (decreases quality).
−
           Filename to look for album art in current directory
+
       --sout-x264-deblock=<string>  
−
 
+
                                Loop filter AlphaC0 and Beta parameters
−
FluidSynth MIDI synthetizer
+
                                alpha:beta
−
       --soundfont=<string>       Sound fonts (required)
+
           Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha
−
           A sound fonts file is required for software synthesis.
+
          and beta parameters. -6 means light filter, 6 means strong.
−
 
+
       --sout-x264-psy-rd=<string>  
−
File input
+
                                 Strength of psychovisual optimization, default
−
      --file-caching=<integer>  Caching value (ms)
+
                                is "1.0:0.0"
−
          Caching value for files, in milliseconds.
+
          First parameter controls if RD is on (subme>=6) or off. Second
−
       --network-caching=<integer>
+
           parameter controls if Trellis is used on psychovisual optimization,
−
                                 Extra network caching value (ms)
+
          default off
−
           Supplementary caching value for remote files, in milliseconds.
+
       --sout-x264-psy, --no-sout-x264-psy
−
       --recursive={none,collapse,expand}
+
                                 Use Psy-optimizations
−
                                 Subdirectory behavior
+
                                (default enabled)
−
          Select whether subdirectories must be expanded.
+
           Use all visual optimizations that can worsen both PSNR and SSIM
−
none: subdirectories
+
       --sout-x264-level=<string> H.264 level
−
           do not appear in the playlist.
+
           Specify H.264 level (as defined by Annex A of the standard). Levels
−
collapse: subdirectories appear but
+
           are not enforced; it's up to the user to select a level compatible
−
          are expanded on first play.
+
           with the rest of the encoding options. Range 1 to 5.1 (10 to 51 is
−
expand: all subdirectories are expanded.
+
           also allowed). Set to 0 for letting x264 set level.
−
 
+
       --sout-x264-profile={baseline,main,high,high10,high422,high444}
−
       --ignore-filetypes=<string>
+
                                 H.264 profile
−
                                Ignored extensions
+
           Specify H.264 profile which limits are enforced over other settings
−
           Files with these extensions will not be added to playlist when
+
       --sout-x264-interlaced, --no-sout-x264-interlaced
−
          opening a directory.
+
                                Interlaced mode
−
This is useful if you add directories that
+
                                 (default disabled)
−
           contain playlist files for instance. Use a comma-separated list of
+
           Pure-interlaced mode.
−
           extensions.
+
       --sout-x264-frame-packing={-1 (), 0 (checkerboard), 1 (column alternation), 2 (row alternation), 3 (side by side), 4 (top bottom), 5 (frame alternation), 6 (2D)}  
−
 
+
                                 Frame packing
−
Fake video decoder
+
           For stereoscopic videos define frame arrangement:  0: checkerboard -
−
      --fake-file=<string>      Image file
+
           pixels are alternatively from L and R  1: column alternation - L and
−
           Path of the image file for fake input.
+
          R are interlaced by column 2: row alternation - L and R are
−
       --fake-file-reload=<integer>
+
          interlaced by row  3: side by side - L is on the left, R on the right
−
                                 Reload image file
+
          4: top bottom - L is on top, R on bottom 5: frame alternation - one
−
           Reload image file every n seconds.
+
          view per frame
−
       --fake-width=<integer>    Video width
+
       --sout-x264-slices=<integer>  
−
          Output video width.
+
                                Force number of slices per frame
−
      --fake-height=<integer>    Video height
+
           Force rectangular slices and is overridden by other slicing options
−
          Output video height.
+
      --sout-x264-slice-max-size=<integer>
−
      --fake-keep-ar, --no-fake-keep-ar
+
                                Limit the size of each slice in bytes
−
                                 Keep aspect ratio (default disabled)
+
          Sets a maximum slice size in bytes, Includes NAL overhead in size
−
           Consider width and height as maximum values. (default disabled)
+
       --sout-x264-slice-max-mbs=<integer>  
−
       --fake-aspect-ratio=<string>
+
                                Limit the size of each slice in macroblocks
−
                                Background aspect ratio
+
           Sets a maximum number of macroblocks per slice
−
          Aspect ratio of the image file (4:3, 16:9). Default is square pixels.
+
       --sout-x264-hrd={none,vbr,cbr}
−
      --fake-deinterlace, --no-fake-deinterlace
+
                                HRD-timing information
−
                                Deinterlace video (default disabled)
+
           HRD-timing information
−
          Deinterlace the image after loading it. (default disabled)
+
       --sout-x264-qp=<integer [-1 .. 51]>  
−
      --fake-deinterlace-module={deinterlace,ffmpeg-deinterlace}
+
                                Set QP
−
                                 Deinterlace module
+
           This selects the quantizer to use. Lower values result in better
−
           Deinterlace module to use.
+
          fidelity, but higher bitrates. 26 is a good default value. Range 0
−
      --fake-chroma=<string>    Chroma used
+
          (lossless) to 51.
−
           Force use of a specific chroma for output. Default is I420.
+
      --sout-x264-crf=<integer [0 .. 51]>
−
 
+
                                Quality-based VBR
−
  Extract RGB component video filter
+
           1-pass Quality-based VBR. Range 0 to 51.
−
      --extract-component={16711680 (Red), 65280 (Green), 255 (Blue)}
+
       --sout-x264-qpmin=<integer [0 .. 51]>  
−
                                RGB component to extract
+
                                Min QP
−
          RGB component to extract. 0 for Red, 1 for Green and 2 for Blue.
+
           Minimum quantizer parameter. 15 to 35 seems to be a useful range.
−
 
+
      --sout-x264-qpmax=<integer [0 .. 51]>
−
  MPEG-I/II/4 / A52 / DTS / MLP audio
+
                                Max QP
−
       --es-fps=<float>           Frames per Second
+
           Maximum quantizer parameter.
−
           This is the frame rate used as a fallback when playing MPEG video
+
      --sout-x264-qpstep=<integer [0 .. 51]>
−
          elementary streams.
+
                                Max QP step
−
 
+
          Max QP step between frames.
−
Erase video filter
+
       --sout-x264-ratetol=<float [0.000000 .. 100.000000]>
−
Remove zones of the video using a picture as mask
+
                                 Average bitrate tolerance
−
       --erase-mask=<string>     Image mask
+
          Allowed variance in average bitrate (in kbits/s).
−
          Image mask. Pixels with an alpha value greater than 50% will be
+
      --sout-x264-vbv-maxrate=<integer>
−
           erased.
+
                                Max local bitrate
−
       --erase-x=<integer>        X coordinate
+
          Sets a maximum local bitrate (in kbits/s).
−
           X coordinate of the mask.
+
       --sout-x264-vbv-bufsize=<integer>  
−
       --erase-y=<integer>       Y coordinate
+
                                VBV buffer
−
           Y coordinate of the mask.
+
           Averaging period for the maximum local bitrate (in kbits).
−
 
+
       --sout-x264-vbv-init=<float [0.000000 .. 1.000000]>  
−
Equalizer with 10 bands
+
                                Initial VBV buffer occupancy
−
      --equalizer-preset={flat,classical,club,dance,fullbass,fullbasstreble,fulltreble,headphones,largehall,live,party,pop,reggae,rock,ska,soft,softrock,techno}
+
           Sets the initial buffer occupancy as a fraction of the buffer size.
−
                                Equalizer preset
+
          Range 0.0 to 1.0.
−
           Preset to use for the equalizer.
+
       --sout-x264-ipratio=<float [1.000000 .. 2.000000]>  
−
       --equalizer-bands=<string> Bands gain
+
                                 QP factor between I and P
−
           Don't use presets, but manually specified bands. You need to provide
+
           QP factor between I and P. Range 1.0 to 2.0.
−
          10 values between -20dB and 20dB, separated by spaces, e.g. "0 2 4 2
+
       --sout-x264-pbratio=<float [1.000000 .. 2.000000]>
−
           0 -2 -4 -2 0 2".
+
                                QP factor between P and B
−
       --equalizer-2pass, --no-equalizer-2pass
+
          QP factor between P and B. Range 1.0 to 2.0.
−
                                 Two pass (default disabled)
+
       --sout-x264-chroma-qp-offset=<integer>  
−
          Filter the audio twice. This provides a more intense effect. (default
+
                                QP difference between chroma and luma
−
          disabled)
+
          QP difference between chroma and luma.
−
       --equalizer-preamp=<float> Global gain
+
       --sout-x264-pass=<integer [0 .. 3]>
−
           Set the global gain in dB (-20 ... 20).
+
                                 Multipass ratecontrol
−
 
+
           Multipass ratecontrol: - 1: First pass, creates stats file  - 2:
−
DVDRead Input (no menu support)
+
          Last pass, does not overwrite stats file  - 3: Nth pass, overwrites
−
       --dvdread-angle=<integer> DVD angle
+
          stats file
−
           Default DVD angle.
+
      --sout-x264-qcomp=<float [0.000000 .. 1.000000]>
−
       --dvdread-caching=<integer>
+
                                 QP curve compression
−
                                 Caching value in ms
+
           QP curve compression. Range 0.0 (CBR) to 1.0 (QCP).
−
           Caching value for DVDs. This value should be set in milliseconds.
+
      --sout-x264-cplxblur=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
 
+
                                Reduce fluctuations in QP
−
DVDnav Input
+
           This reduces the fluctuations in QP before curve compression.
−
       --dvdnav-angle=<integer>  DVD angle
+
           Temporally blurs complexity.
−
          Default DVD angle.
+
       --sout-x264-qblur=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
       --dvdnav-caching=<integer> Caching value in ms
+
                                Reduce fluctuations in QP
−
          Caching value for DVDs. This value should be set in milliseconds.
+
           This reduces the fluctuations in QP after curve compression.
−
       --dvdnav-menu, --no-dvdnav-menu
+
          Temporally blurs quants.
−
                                 Start directly in menu (default enabled)
+
       --sout-x264-aq-mode=<integer [0 .. 2]>  
−
           Start the DVD directly in the main menu. This will try to skip all
+
                                How AQ distributes bits
−
          the useless warning introductions. (default enabled)
+
          Defines bitdistribution mode for AQ, default 1  - 0: Disabled - 1:
−
 
+
          Current x264 default mode  - 2: uses log(var)^2 instead of log(var)
−
  DVB subtitles decoder
+
           and attempts to adapt strength per frame
−
      --dvbsub-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
      --sout-x264-aq-strength=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
                                 Subpicture position
+
                                Strength of AQ
−
           You can enforce the subpicture position on the video (0=center,
+
           Strength to reduce blocking and blurring in flat and textured areas,
−
          1=left, 2=right, 4=top, 8=bottom, you can also use combinations of
+
           default 1.0 recommended to be between 0..2  - 0.5: weak AQ  - 1.5:
−
          these values, e.g. 6=top-right).
+
          strong AQ
−
      --dvbsub-x=<integer>      Decoding X coordinate
+
       --sout-x264-partitions={none,fast,normal,slow,all}
−
           X coordinate of the rendered subtitle
+
                                 Partitions to consider
−
      --dvbsub-y=<integer>      Decoding Y coordinate
+
           Partitions to consider in analyse mode:  - none  :  - fast  : i4x4
−
           Y coordinate of the rendered subtitle
+
          - normal: i4x4,p8x8,(i8x8)  - slow  : i4x4,p8x8,(i8x8),b8x8  - all 
−
       --sout-dvbsub-x=<integer>  Encoding X coordinate
+
          : i4x4,p8x8,(i8x8),b8x8,p4x4 (p4x4 requires p8x8. i8x8 requires
−
           X coordinate of the encoded subtitle
+
           8x8dct).
−
       --sout-dvbsub-y=<integer> Encoding Y coordinate
+
       --sout-x264-direct={none,spatial,temporal,auto}
−
          Y coordinate of the encoded subtitle
+
                                Direct MV prediction mode
−
 
+
          Direct MV prediction mode
−
  Dummy interface function
+
      --sout-x264-direct-8x8=<integer [-1 .. 1]>
−
  Dummy Interface:
+
                                 Direct prediction size
−
      --dummy-quiet, --no-dummy-quiet
+
          Direct prediction size:  -  0: 4x4  -  1: 8x8  - -1: smallest
−
                                Do not open a DOS command box interface
+
           possible according to level
−
                                (default disabled)
+
      --sout-x264-weightb, --no-sout-x264-weightb
−
           By default the dummy interface plugin will start a DOS command box.
+
                                Weighted prediction for B-frames
−
          Enabling the quiet mode will not bring this command box but can also
+
                                (default enabled)
−
           be pretty annoying when you want to stop VLC and no video window is
+
           Weighted prediction for B-frames.
−
           open. (default disabled)
+
       --sout-x264-weightp=<integer [0 .. 2]>  
−
  Dummy decoder:
+
                                Weighted prediction for P-frames
−
       --dummy-save-es, --no-dummy-save-es
+
           Weighted prediction for P-frames:  - 0: Disabled  - 1: Blind offset
−
                                 Save raw codec data (default disabled)
+
           - 2: Smart analysis
−
          Save the raw codec data if you have selected/forced the dummy decoder
+
       --sout-x264-me={dia,hex,umh,esa,tesa}  
−
           in the main options. (default disabled)
+
                                Integer pixel motion estimation method
−
  Dummy Video output:
+
           Selects the motion estimation algorithm:  - dia: diamond search,
−
      --dummy-chroma=<string>    Dummy image chroma format
+
           radius 1 (fast)  - hex: hexagonal search, radius 2  - umh: uneven
−
           Force the dummy video output to create images using a specific chroma
+
           multi-hexagon search (better but slower)  - esa: exhaustive search
−
          format instead of trying to improve performances by using the most
+
           (extremely slow, primarily for testing)  - tesa: hadamard exhaustive
−
          efficient one.
+
           search (extremely slow, primarily for testing)
−
 
+
       --sout-x264-merange=<integer [1 .. 64]>
−
DTS Coherent Acoustics audio decoder
+
                                 Maximum motion vector search range
−
       --dts-dynrng, --no-dts-dynrng
+
           Maximum distance to search for motion estimation, measured from
−
                                 DTS dynamic range compression (default
+
          predicted position(s). Default of 16 is good for most footage, high
−
                                enabled)
+
          motion sequences may benefit from settings between 24 and 32. Range 0
−
           Dynamic range compression makes the loud sounds softer, and the soft
+
           to 64.
−
          sounds louder, so you can more easily listen to the stream in a noisy
+
       --sout-x264-mvrange=<integer>  
−
           environment without disturbing anyone. If you disable the dynamic
+
                                Maximum motion vector length
−
          range compression the playback will be more adapted to a movie
+
           Maximum motion vector length in pixels. -1 is automatic, based on
−
          theater or a listening room. (default enabled)
+
           level.
−
 
+
       --sout-x264-mvrange-thread=<integer>
−
DirectShow input
+
                                 Minimum buffer space between threads
−
       --dshow-caching=<integer> Caching value in ms
+
           Minimum buffer space between threads. -1 is automatic, based on
−
           Caching value for DirectShow streams. This value should be set in
+
           number of threads.
−
           milliseconds.
+
       --sout-x264-subme=<integer>
−
       --dshow-vdev={,none}       Video device name
+
                                 Subpixel motion estimation and partition
−
          Name of the video device that will be used by the DirectShow plugin.
+
                                decision quality
−
           If you don't specify anything, the default device will be used.
+
          This parameter controls quality versus speed tradeoffs involved in
−
      --dshow-adev={,none}      Audio device name
+
           the motion estimation decision process (lower = quicker and higher =
−
           Name of the audio device that will be used by the DirectShow plugin.
+
          better quality). Range 1 to 9.
−
           If you don't specify anything, the default device will be used.
+
       --sout-x264-mixed-refs, --no-sout-x264-mixed-refs
−
      --dshow-size=<string>      Video size
+
                                 Decide references on a per partition basis
−
           Size of the video that will be displayed by the DirectShow plugin. If
+
                                (default enabled)
−
           you don't specify anything the default size for your device will be
+
          Allows each 8x8 or 16x8 partition to independently select a reference
−
          used. You can specify a standard size (cif, d1, ...) or
+
           frame, as opposed to only one ref per macroblock.
−
          <width>x<height>.
+
       --sout-x264-chroma-me, --no-sout-x264-chroma-me
−
       --dshow-aspect-ratio=<string>
+
                                 Chroma in motion estimation
−
                                 Picture aspect-ratio n:m
+
                                (default enabled)
−
           Define input picture aspect-ratio to use. Default is 4:3
+
          Chroma ME for subpel and mode decision in P-frames.
−
      --dshow-chroma=<string>    Video input chroma format
+
       --sout-x264-8x8dct, --no-sout-x264-8x8dct
−
           Force the DirectShow video input to use a specific chroma format (eg.
+
                                Adaptive spatial transform size
−
          I420 (default), RV24, etc.)
+
                                 (default enabled)
−
       --dshow-fps=<float>       Video input frame rate
+
           SATD-based decision for 8x8 transform in inter-MBs.
−
           Force the DirectShow video input to use a specific frame rate(eg. 0
+
      --sout-x264-trellis=<integer [0 .. 2]>  
−
           means default, 25, 29.97, 50, 59.94, etc.)
+
                                 Trellis RD quantization
−
       --dshow-config, --no-dshow-config
+
           Trellis RD quantization:  - 0: disabled  - 1: enabled only on the
−
                                 Device properties (default disabled)
+
          final encode of a MB  - 2: enabled on all mode decisions This
−
           Show the properties dialog of the selected device before starting the
+
          requires CABAC.
−
           stream. (default disabled)
+
       --sout-x264-lookahead=<integer [0 .. 60]>  
−
       --dshow-tuner, --no-dshow-tuner
+
                                 Framecount to use on frametype lookahead
−
                                 Tuner properties (default disabled)
+
          Framecount to use on frametype lookahead. Currently default can cause
−
           Show the tuner properties [channel selection] page. (default disabled)
+
           sync-issues on unmuxable output, like rtsp-output without ts-mux
−
       --dshow-tuner-channel=<integer>
+
       --sout-x264-intra-refresh, --no-sout-x264-intra-refresh
−
                                 Tuner TV Channel
+
                                Use Periodic Intra Refresh
−
          Set the TV channel the tuner will set to (0 means default).
+
                                (default disabled)
−
      --dshow-tuner-country=<integer>
+
          Use Periodic Intra Refresh instead of IDR frames
−
                                Tuner country code
+
       --sout-x264-mbtree, --no-sout-x264-mbtree
−
           Set the tuner country code that establishes the current
+
                                 Use mb-tree ratecontrol
−
          channel-to-frequency mapping (0 means default).
+
                                (default enabled)
−
       --dshow-tuner-input={0 (Default), 1 (Cable), 2 (Antenna)}
+
          You can disable use of Macroblock-tree on ratecontrol
−
                                 Tuner input type
+
       --sout-x264-fast-pskip, --no-sout-x264-fast-pskip
−
          Select the tuner input type (Cable/Antenna).
+
                                 Early SKIP detection on P-frames
−
       --dshow-video-input=<integer>
+
                                (default enabled)
−
                                 Video input pin
+
          Early SKIP detection on P-frames.
−
           Select the video input source, such as composite, s-video, or tuner.
+
      --sout-x264-dct-decimate, --no-sout-x264-dct-decimate
−
          Since these settings are hardware-specific, you should find good
+
                                Coefficient thresholding on P-frames
−
          settings in the "Device config" area, and use those numbers here. -1
+
                                (default enabled)
−
          means that settings will not be changed.
+
          Coefficient thresholding on P-frames. Eliminate dct blocks containing
−
      --dshow-video-output=<integer>
+
          only a small single coefficient.
−
                                Video output pin
+
      --sout-x264-nr=<integer [0 .. 1000]>
−
          Select the video output type. See the "video input" option.
+
                                Noise reduction
−
      --dshow-audio-input=<integer>
+
          Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000
−
                                 Audio input pin
+
          seems to be a useful range.
−
           Select the audio input source. See the "video input" option.
+
      --sout-x264-deadzone-inter=<integer [0 .. 32]>
−
       --dshow-audio-output=<integer>
+
                                Inter luma quantization deadzone
−
                                 Audio output pin
+
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
−
           Select the audio output type. See the "video input" option.
+
      --sout-x264-deadzone-intra=<integer [0 .. 32]>
−
       --dshow-amtuner-mode={0 (Default), 1 (TV), 2 (FM radio), 4 (AM radio), 8 (DSS)}
+
                                Intra luma quantization deadzone
−
                                AM Tuner mode
+
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
−
          AM Tuner mode. Can be one of Default (0), TV (1),AM Radio (2), FM
+
      --sout-x264-non-deterministic, --no-sout-x264-non-deterministic
−
          Radio (3) or DSS (4).
+
                                Non-deterministic optimizations when threaded
−
       --dshow-audio-channels=<integer>
+
                                (default disabled)
−
                                Number of audio channels
+
          Slightly improve quality of SMP, at the cost of repeatability.
−
          Select audio input format with the given number of audio channels (if
+
      --sout-x264-asm, --no-sout-x264-asm
−
          non 0)
+
                                CPU optimizations
−
      --dshow-audio-samplerate=<integer>
+
                                (default enabled)
−
                                 Audio sample rate
+
          Use assembler CPU optimizations.
−
          Select audio input format with the given sample rate (if non 0)
+
      --sout-x264-psnr, --no-sout-x264-psnr
−
       --dshow-audio-bitspersample=<integer>
+
                                PSNR computation
−
                                 Audio bits per sample
+
                                (default disabled)
−
          Select audio input format with the given bits/sample (if non 0)
+
          Compute and print PSNR stats. This has no effect on the actual
 +
          encoding quality.
 +
      --sout-x264-ssim, --no-sout-x264-ssim
 +
                                SSIM computation
 +
                                (default disabled)
 +
          Compute and print SSIM stats. This has no effect on the actual
 +
          encoding quality.
 +
      --sout-x264-quiet, --no-sout-x264-quiet
 +
                                Quiet mode
 +
                                (default disabled)
 +
          Quiet mode
 +
      --sout-x264-sps-id=<integer>
 +
                                SPS and PPS id numbers
 +
          Set SPS and PPS id numbers to allow concatenating streams with
 +
          different settings.
 +
      --sout-x264-aud, --no-sout-x264-aud
 +
                                Access unit delimiters
 +
                                (default disabled)
 +
          Generate access unit delimiter NAL units.
 +
      --sout-x264-verbose, --no-sout-x264-verbose
 +
                                Statistics
 +
                                (default disabled)
 +
          Print stats for each frame.
 +
      --sout-x264-stats=<string> Filename for 2 pass stats file
 +
          Filename for 2 pass stats file for multi-pass encoding.
 +
      --sout-x264-preset={ultrafast,superfast,veryfast,faster,fast,medium,slow,slower,veryslow,placebo}
 +
                                Default preset setting used
 +
          Default preset setting used
 +
      --sout-x264-tune={film,animation,grain,stillimage,psnr,ssim,fastdecode,zerolatency}
 +
                                Default tune setting used
 +
          Default tune setting used
 +
      --sout-x264-options=<string>
 +
                                x264 advanced options
 +
          x264 advanced options, in the form {opt=val,op2=val2}.
  
−
  DirectX (DirectDraw) video output
+
  WebM video decoder (vpx)
−
Recommended video output for Windows XP. Incompatible with Vista's Aero interface
+
       --sout-vpx-quality-mode=<integer [0 .. 2]>
−
       --directx-hw-yuv, --no-directx-hw-yuv
+
                                 Quality mode
−
                                Use hardware YUV->RGB conversions (default
+
           Quality setting which will determine max encoding time  - 0: Good
−
                                enabled)
+
           quality  - 1: Realtime  - 2: Best quality
−
          Try to use hardware acceleration for YUV->RGB conversions. This
 
−
          option doesn't have any effect when using overlays. (default enabled)
 
−
      --directx-use-sysmem, --no-directx-use-sysmem
 
−
                                 Use video buffers in system memory (default
 
−
                                disabled)
 
−
           Create video buffers in system memory instead of video memory. This
 
−
          isn't recommended as usually using video memory allows to benefit
 
−
          from more hardware acceleration (like rescaling or YUV->RGB
 
−
           conversions). This option doesn't have any effect when using
 
−
          overlays. (default disabled)
 
−
      --directx-3buffering, --no-directx-3buffering
 
−
                                Use triple buffering for overlays (default
 
−
                                enabled)
 
−
          Try to use triple buffering when using YUV overlays. That results in
 
−
          much better video quality (no flickering). (default enabled)
 
−
      --directx-device={}        Name of desired display device
 
−
          In a multiple monitor configuration, you can specify the Windows
 
−
          device name of the display that you want the video window to open on.
 
−
          For example, "\\.\DISPLAY1" or "\\.\DISPLAY2".
 
  
−
  Direct3D video output
+
  Vorbis audio decoder (vorbis)
−
Recommended video output for Windows Vista and later versions
+
       --sout-vorbis-quality=<integer [0 .. 10]>  
−
      --direct3d-desktop, --no-direct3d-desktop
+
                                 Encoding quality
−
                                Enable desktop mode  (default disabled)
+
           Enforce a quality between 1 (low) and 10 (high), instead of
−
          The desktop mode allows you to display the video on the desktop.
+
           specifying a particular bitrate. This will produce a VBR stream.
−
          (default disabled)
+
       --sout-vorbis-max-bitrate=<integer>  
−
 
+
                                 Maximum encoding bitrate
−
Dirac video encoder using dirac-research library
+
           Maximum bitrate in kbps. This is useful for streaming applications.
−
       --sout-dirac-quality=<float [0.000000 .. 10.000000]>
+
       --sout-vorbis-min-bitrate=<integer>  
−
                                 Constant quality factor
+
                                 Minimum encoding bitrate
−
           If bitrate=0, use this value for constant quality
+
          Minimum bitrate in kbps. This is useful for encoding for a fixed-size
−
      --sout-dirac-bitrate=<integer [-1 .. 2147483647]>
+
           channel.
−
                                CBR bitrate (kbps)
+
       --sout-vorbis-cbr, --no-sout-vorbis-cbr
−
          A value > 0 enables constant bitrate mode
+
                                 CBR encoding
−
      --sout-dirac-lossless, --no-sout-dirac-lossless
+
                                 (default disabled)
−
                                Enable lossless coding (default disabled)
+
           Force a constant bitrate encoding (CBR).
−
          Lossless coding ignores bitrate and quality settings, allowing for
 
−
          perfect reproduction of the original (default disabled)
 
−
      --sout-dirac-prefilter={none,cwm,rectlp,diaglp}
 
−
                                Prefilter
 
−
           Enable adaptive prefiltering
 
−
      --sout-dirac-prefilter-strength=<integer [0 .. 10]>
 
−
                                Amount of prefiltering
 
−
          Higher value implies more prefiltering
 
−
      --sout-dirac-chroma-fmt={420,422,444}
 
−
                                Chroma format
 
−
          Picking chroma format will force a conversion of the video into that
 
−
          format
 
−
      --sout-dirac-l1-sep=<integer [-1 .. 2147483647]>
 
−
                                Distance between 'P' frames
 
−
          Distance between 'P' frames
 
−
       --sout-dirac-num-l1=<integer [-1 .. 2147483647]>
 
−
                                 Number of 'P' frames per GOP
 
−
           Number of 'P' frames per GOP
 
−
      --sout-dirac-coding-mode={auto,progressive,field}
 
−
                                Picture coding mode
 
−
          Field coding is where interlaced fields are coded separately as
 
−
          opposed to a pseudo-progressive frame
 
−
      --sout-dirac-mv-prec={1,1/2,1/4,1/8}
 
−
                                Motion vector precision
 
−
          Motion vector precision in pels.
 
−
      --sout-dirac-mc-blk-width=<integer [-1 .. 2147483647]>
 
−
                                Width of motion compensation blocks
 
−
       --sout-dirac-mc-blk-height=<integer [-1 .. 2147483647]>
 
−
                                 mc-blk-height
 
−
      --sout-dirac-mc-blk-overlap=<integer [-1 .. 100]>
 
−
                                Block overlap (%)
 
−
          Amount that each motion block should be overlapped by its neighbours
 
−
      --sout-dirac-mc-blk-xblen=<integer [-1 .. 2147483647]>
 
−
                                xblen
 
−
           Total horizontal block length including overlaps
 
−
      --sout-dirac-mc-blk-yblen=<integer [-1 .. 2147483647]>
 
−
                                yblen
 
−
          Total vertical block length including overlaps
 
−
      --sout-dirac-me-simple-search=<string>
 
−
                                Simple ME search area x:y
 
−
          (Not recommended) Perform a simple (non hierarchical block matching
 
−
          motion vector search with search range of +/-x, +/-y
 
−
       --sout-dirac-me-combined, --no-sout-dirac-me-combined
 
−
                                 Three component motion estimation (default
 
−
                                 enabled)
 
−
          Use chroma as part of the motion estimation process (default enabled)
 
−
      --sout-dirac-dwt-intra=<integer [-1 .. 6]>
 
−
                                Intra picture DWT filter
 
−
           Intra picture DWT filter
 
−
      --sout-dirac-dwt-inter=<integer [-1 .. 6]>
 
−
                                Inter picture DWT filter
 
−
          Inter picture DWT filter
 
−
      --sout-dirac-dwt-depth=<integer [-1 .. 4]>
 
−
                                Number of DWT iterations
 
−
          Also known as DWT levels
 
−
      --sout-dirac-multi-quant=<integer [-1 .. 1]>
 
−
                                Enable multiple quantizers
 
−
          Enable multiple quantizers per subband (one per codeblock)
 
−
      --sout-dirac-spartition=<integer [-1 .. 1]>
 
−
                                Enable spatial partitioning
 
−
          Enable spatial partitioning
 
−
      --sout-dirac-noac, --no-sout-dirac-noac
 
−
                                Disable arithmetic coding (default disabled)
 
−
          Use variable length codes instead, useful for very high bitrates
 
−
          (default disabled)
 
−
      --sout-dirac-cpd=<float>  cycles per degree
 
−
          cycles per degree
 
  
−
  File dumper
+
  Libtwolame audio encoder (twolame)
−
       --demuxdump-file=<string> Dump filename
+
       --sout-twolame-quality=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
           Name of the file to which the raw stream will be dumped.
+
                                Encoding quality
−
       --demuxdump-append, --no-demuxdump-append
+
           Force a specific encoding quality between 0.0 (high) and 50.0 (low),
−
                                Append to existing file (default disabled)
+
          instead of specifying a particular bitrate. This will produce a VBR
−
          If the file already exists, it will not be overwritten. (default
+
          stream.
−
          disabled)
+
       --sout-twolame-mode={0 (Stereo), 1 (Dual mono), 2 (Joint stereo)}
−
 
+
                                Stereo mode
−
Deinterlacing video filter
+
          Handling mode for stereo streams
−
  Display:
+
       --sout-twolame-vbr, --no-sout-twolame-vbr
−
       --filter-deinterlace-mode={discard,blend,mean,bob,linear,x,yadif,yadif2x}
+
                                 VBR mode
−
                                 Deinterlace mode
+
                                (default disabled)
−
           Deinterlace method to use for local playback.
+
           Use Variable BitRate. Default is to use Constant BitRate (CBR).
−
  Streaming:
+
       --sout-twolame-psy=<integer>
−
       --sout-deinterlace-mode={discard,blend,mean,bob,linear,x,yadif,yadif2x}
+
                                 Psycho-acoustic model
−
                                 Streaming deinterlace mode
+
           Integer from -1 (no model) to 4.
−
           Deinterlace method to use for streaming.
 
  
−
  Crop video filter
+
  TTML subtitles decoder (ttml)
−
Remove borders of the video and replace them by black borders
+
       --ttml-align=<integer>     Subtitle justification
−
      --crop-geometry=<string>  Crop geometry (pixels)
+
           Set the justification of subtitles
−
          Set the geometry of the zone to crop. This is set as <width> x
 
−
          <height> + <left offset> + <top offset>.
 
−
      --autocrop, --no-autocrop  Automatic cropping (default disabled)
 
−
          Automatically detect black borders and crop them. (default disabled)
 
−
       --autocrop-ratio-max=<integer [0 .. 15000]>
 
−
                                Ratio max (x 1000)
 
−
           Maximum image ratio. The crop plugin will never automatically crop to
 
−
          a higher ratio (ie, to a more "flat" image). The value is x1000: 1333
 
−
          means 4/3.
 
−
      --crop-ratio=<integer [0 .. 15000]>
 
−
                                Manual ratio
 
−
          Force a ratio (0 for automatic). Value is x1000: 1333 means 4/3.
 
−
      --autocrop-time=<integer>  Number of images for change
 
−
          The number of consecutive images with the same detected ratio
 
−
          (different from the previously detected ratio) to consider that ratio
 
−
          chnged and trigger recrop.
 
−
      --autocrop-diff=<integer>  Number of lines for change
 
−
          The minimum difference in the number of detected black lines to
 
−
          consider that ratio changed and trigger recrop.
 
−
      --autocrop-non-black-pixels=<integer>
 
−
                                Number of non black pixels
 
−
          The maximum of non-black pixels in a line to consider that the line
 
−
          is black.
 
−
      --autocrop-skip-percent=<integer [0 .. 100]>
 
−
                                Skip percentage (%)
 
−
          Percentage of the line to consider while checking for black lines.
 
−
          This allows to skip logos in black borders and crop them anyway.
 
−
      --autocrop-luminance-threshold=<integer [0 .. 128]>
 
−
                                Luminance threshold
 
−
          Maximum luminance to consider a pixel as black (0-255).
 
  
−
  Video scaling filter
+
  Theora video decoder (theora)
−
  Crop:
+
       --theora-postproc=<integer>  
−
      --croppadd-croptop=<integer [0 .. 2147483647]>
+
                                 Post processing quality
−
                                Pixels to crop from top
+
       --sout-theora-quality=<integer>  
−
          Number of pixels to crop from the top of the image.
+
                                 Encoding quality
−
      --croppadd-cropbottom=<integer [0 .. 2147483647]>
+
           Enforce a quality between 1 (low) and 10 (high), instead of
−
                                Pixels to crop from bottom
+
           specifying a particular bitrate. This will produce a VBR stream.
−
          Number of pixels to crop from the bottom of the image.
 
−
       --croppadd-cropleft=<integer [0 .. 2147483647]>
 
−
                                 Pixels to crop from left
 
−
          Number of pixels to crop from the left of the image.
 
−
      --croppadd-cropright=<integer [0 .. 2147483647]>
 
−
                                Pixels to crop from right
 
−
          Number of pixels to crop from the right of the image.
 
−
  Padd:
 
−
       --croppadd-paddtop=<integer [0 .. 2147483647]>
 
−
                                Pixels to padd to top
 
−
          Number of pixels to padd to the top of the image after cropping.
 
−
      --croppadd-paddbottom=<integer [0 .. 2147483647]>
 
−
                                 Pixels to padd to bottom
 
−
           Number of pixels to padd to the bottom of the image after cropping.
 
−
      --croppadd-paddleft=<integer [0 .. 2147483647]>
 
−
                                Pixels to padd to left
 
−
           Number of pixels to padd to the left of the image after cropping.
 
−
      --croppadd-paddright=<integer [0 .. 2147483647]>
 
−
                                Pixels to padd to right
 
−
          Number of pixels to padd to the right of the image after cropping.
 
  
−
  Color threshold filter
+
  USF subtitles decoder (subsusf)
−
Select one color in the video
+
       --subsdec-formatted, --no-subsdec-formatted
−
       --colorthres-color={16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 65280 (Lime), 255 (Blue), 65535 (Aqua)}
+
                                 Formatted Subtitles
−
                                 Color
+
                                (default enabled)
−
          Colors similar to this will be kept, others will be grayscaled. This
+
           Some subtitle formats allow for text formatting. VLC partly
−
          must be an hexadecimal (like HTML colors). The first two chars are
+
           implements this, but you can choose to disable all formatting.
−
           for red, then green, then blue. #000000 = black, #FF0000 = red,
 
−
           #00FF00 = green, #FFFF00 = yellow (red + green), #FFFFFF = white
 
−
      --colorthres-saturationthres=<integer>
 
−
                                Saturaton threshold
 
−
      --colorthres-similaritythres=<integer>
 
−
                                Similarity threshold
 
  
−
  Clone video filter
+
  Text subtitle decoder (subsdec)
−
Duplicate your video to multiple windows and/or video output modules
+
       --subsdec-align={0 (Center), 1 (Left), 2 (Right)}
−
       --clone-count=<integer>    Number of clones
+
                                Subtitle justification
−
           Number of video windows in which to clone the video.
+
           Set the justification of subtitles
−
       --clone-vout-list=<string> Video output modules
+
       --subsdec-encoding={,system,UTF-8,UTF-16,UTF-16BE,UTF-16LE,GB18030,ISO-8859-15,Windows-1252,IBM850,ISO-8859-2,Windows-1250,ISO-8859-3,ISO-8859-10,Windows-1251,KOI8-R,KOI8-U,ISO-8859-6,Windows-1256,ISO-8859-7,Windows-1253,ISO-8859-8,Windows-1255,ISO-8859-9,Windows-1254,ISO-8859-11,Windows-874,ISO-8859-13,Windows-1257,ISO-8859-14,ISO-8859-16,ISO-2022-CN-EXT,EUC-CN,ISO-2022-JP-2,EUC-JP,Shift_JIS,CP949,ISO-2022-KR,Big5,ISO-2022-TW,Big5-HKSCS,VISCII,Windows-1258}
−
           You can use specific video output modules for the clones. Use a
+
                                Subtitle text encoding
−
           comma-separated list of modules.
+
           Set the encoding used in text subtitles
 +
      --subsdec-autodetect-utf8, --no-subsdec-autodetect-utf8
 +
                                UTF-8 subtitle autodetection
 +
                                (default enabled)
 +
           This enables automatic detection of UTF-8 encoding within subtitle
 +
          files.
  
−
  Sound Delay
+
  DVD subtitles decoder (spudec)
−
Add a delay effect to the sound
+
       --dvdsub-transparency, --no-dvdsub-transparency
−
      --delay-time=<float>      Delay time
+
                                 Disable DVD subtitle transparency
−
          Time in milliseconds of the average delay. Note average
+
                                 (default disabled)
−
       --sweep-depth=<float>      Sweep Depth
+
           Removes all transparency effects used in DVD subtitles.
−
          Time in milliseconds of the maximum sweep depth. Thus, the sweep
 
−
          range will be delay-time +/- sweep-depth.
 
−
      --sweep-rate=<float>      Sweep Rate
 
−
          Rate of change of sweep depth in milliseconds shift per second of play
 
−
      --feedback-gain=<float [-0.900000 .. 0.900000]>
 
−
                                 Feedback Gain
 
−
          Gain on Feedback loop
 
−
      --wet-mix=<float [-0.999000 .. 0.999000]>
 
−
                                 Wet mix
 
−
           Level of delayed signal
 
−
      --dry-mix=<float [-0.999000 .. 0.999000]>
 
−
                                Dry Mix
 
−
          Level of input signal
 
  
−
  Audio CD input
+
  Speex audio decoder (speex)
−
       --cdda-caching=<integer>  Caching value in ms
+
       --sout-speex-mode={0 (Narrow-band (8kHz)), 1 (Wide-band (16kHz)), 2 (Ultra-wideband (32kHz))}
−
          Default caching value for Audio CDs. This value should be set in
+
                                Mode
−
           milliseconds.
+
           Enforce the mode of the encoder.
−
       --cdda-track=<integer>     (null)
+
       --sout-speex-complexity=<integer [1 .. 10]>  
−
       --cdda-first-sector=<integer>
+
                                Encoding complexity
−
                                 (null)
+
          Enforce the complexity of the encoder.
−
       --cdda-last-sector=<integer>
+
      --sout-speex-cbr, --no-sout-speex-cbr
−
                                 (null)
+
                                CBR encoding
−
       --cddb-server=<string>    CDDB Server
+
                                (default disabled)
−
           Address of the CDDB server to use.
+
          Enforce a constant bitrate encoding (CBR) instead of default variable
−
       --cddb-port=<integer>      CDDB port
+
          bitrate encoding (VBR).
−
           CDDB Server port to use.
+
       --sout-speex-quality=<float [0.000000 .. 10.000000]>  
 +
                                 Encoding quality
 +
          Enforce a quality between 0 (low) and 10 (high).
 +
       --sout-speex-max-bitrate=<integer>  
 +
                                 Maximal bitrate
 +
          Enforce the maximal VBR bitrate
 +
       --sout-speex-vad, --no-sout-speex-vad
 +
                                Voice activity detection
 +
                                (default enabled)
 +
          Enable voice activity detection (VAD). It is automatically activated
 +
           in VBR mode.
 +
       --sout-speex-dtx, --no-sout-speex-dtx
 +
                                Discontinuous Transmission
 +
                                (default disabled)
 +
           Enable discontinuous transmission (DTX).
  
−
  Canvas video filter
+
  Dirac video decoder using libschroedinger (schroedinger)
−
Automatically resize and pad a video
+
  Encoding:
−
       --canvas-width=<integer [0 .. 2147483647]>
+
      --sout-schro-rate-control={constant_noise_threshold,constant_bitrate,low_delay,lossless,constant_lambda,constant_error,constant_quality}
−
                                 Output width
+
                                Rate control method
−
           Output (canvas) image width
+
          Method used to encode the video sequence
−
       --canvas-height=<integer [0 .. 2147483647]>
+
      --sout-schro-quality=<float [-1.000000 .. 10.000000]>
−
                                 Output height
+
                                Constant quality factor
−
           Output (canvas) image height
+
          Quality factor to use in constant quality mode
−
       --canvas-aspect=<string>   Output picture aspect ratio
+
      --sout-schro-noise-threshold=<float [-1.000000 .. 100.000000]>
−
           Set the canvas' picture aspect ratio. If omitted, the canvas is
+
                                Noise Threshold
−
           assumed to have the same SAR as the input.
+
          Noise threshold to use in constant noise threshold mode
−
       --canvas-padd, --no-canvas-padd
+
       --sout-schro-bitrate=<integer [-1 .. 2147483647]>  
−
                                 Pad video (default enabled)
+
                                 CBR bitrate (kbps)
−
           If enabled, video will be padded to fit in canvas after scaling.
+
           Target bitrate in kbps when encoding in constant bitrate mode
−
           Otherwise, video will be cropped to fix in canvas after scaling.
+
      --sout-schro-max-bitrate=<integer [-1 .. 2147483647]>
−
           (default enabled)
+
                                Maximum bitrate (kbps)
−
 
+
          Maximum bitrate in kbps when encoding in constant bitrate mode
−
Bluescreen video filter
+
       --sout-schro-min-bitrate=<integer [-1 .. 2147483647]>  
−
This effect, also known as "greenscreen" or "chroma key" blends the "blue parts" of the foreground image of the mosaic on the background (like weather forecasts). You can choose the "key" color for blending (blue by default).
+
                                 Minimum bitrate (kbps)
−
       --bluescreen-u=<integer [0 .. 255]>
+
          Minimum bitrate in kbps when encoding in constant bitrate mode
−
                                 Bluescreen U value
+
      --sout-schro-gop-structure={adaptive,intra_only,backref,chained_backref,biref,chained_biref}
−
           "U" value for the bluescreen key color (in YUV values). From 0 to
+
                                GOP structure
−
           255. Defaults to 120 for blue.
+
           GOP structure used to encode the video sequence
−
       --bluescreen-v=<integer [0 .. 255]>
+
       --sout-schro-gop-length=<integer [-1 .. 2147483647]>  
−
                                 Bluescreen V value
+
                                GOP length
−
           "V" value for the bluescreen key color (in YUV values). From 0 to
+
          Number of pictures between successive sequence headers i.e. length of
−
           255. Defaults to 90 for blue.
+
           the group of pictures
−
       --bluescreen-ut=<integer [0 .. 255]>
+
      --sout-schro-chroma-fmt={420,422,444}
−
                                 Bluescreen U tolerance
+
                                Chroma format
−
           Tolerance of the bluescreen blender on color variations for the U
+
          Picking chroma format will force a conversion of the video into that
−
           plane. A value between 10 and 20 seems sensible.
+
          format
−
       --bluescreen-vt=<integer [0 .. 255]>
+
      --sout-schro-coding-mode={auto,progressive,field}
−
                                 Bluescreen V tolerance
+
                                Picture coding mode
−
           Tolerance of the bluescreen blender on color variations for the V
+
          Field coding is where interlaced fields are coded separately as
−
           plane. A value between 10 and 20 seems sensible.
+
           opposed to a pseudo-progressive frame
 +
      --sout-schro-mv-precision={1,1/2,1/4,1/8}
 +
                                Motion Vector precision
 +
          Motion Vector precision in pels
 +
      --sout-schro-motion-block-size={automatic,small,medium,large}
 +
                                Size of motion compensation blocks
 +
          Size of motion compensation blocks
 +
      --sout-schro-motion-block-overlap={automatic,none,partial,full}
 +
                                Overlap of motion compensation blocks
 +
          Overlap of motion compensation blocks
 +
      --sout-schro-me-combined=<integer [-1 .. 1]>
 +
                                Three component motion estimation
 +
          Use chroma as part of the motion estimation process
 +
      --sout-schro-enable-hierarchical-me=<integer [-1 .. 1]>
 +
                                Enable hierarchical Motion Estimation
 +
          Enable hierarchical Motion Estimation
 +
      --sout-schro-downsample-levels=<integer [-1 .. 8]>
 +
                                Number of levels of downsampling
 +
          Number of levels of downsampling in hierarchical motion estimation
 +
          mode
 +
      --sout-schro-enable-global-me=<integer [-1 .. 1]>
 +
                                Enable Global Motion Estimation
 +
          Enable Global Motion Estimation
 +
      --sout-schro-enable-phasecorr-me=<integer [-1 .. 1]>
 +
                                Enable Phase Correlation Estimation
 +
          Enable Phase Correlation Estimation
 +
      --sout-schro-intra-wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7}
 +
                                Intra picture DWT filter
 +
          Intra picture DWT filter
 +
      --sout-schro-inter-wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7}
 +
                                Inter picture DWT filter
 +
          Inter picture DWT filter
 +
      --sout-schro-transform-depth=<integer [-1 .. 6]>
 +
                                Number of DWT iterations
 +
          Also known as DWT levels
 +
      --sout-schro-enable-multiquant=<integer [-1 .. 1]>
 +
                                Enable multiple quantizers
 +
          Enable multiple quantizers per subband (one per codeblock)
 +
      --sout-schro-codeblock-size={automatic,small,medium,large,full}
 +
                                Size of code blocks in each subband
 +
          Size of code blocks in each subband
 +
      --sout-schro-filtering={none,center_weighted_median,gaussian,add_noise,adaptive_gaussian,lowpass}
 +
                                Prefilter
 +
          Enable adaptive prefiltering
 +
      --sout-schro-filter-value=<float [-1.000000 .. 100.000000]>
 +
                                Amount of prefiltering
 +
          Higher value implies more prefiltering
 +
      --sout-schro-enable-scd=<integer [-1 .. 1]>
 +
                                Enable Scene Change Detection
 +
          Enable Scene Change Detection
 +
      --sout-schro-perceptual-weighting={none,ccir959,moo,manos_sakrison}
 +
                                perceptual weighting method
 +
          perceptual weighting method
 +
      --sout-schro-perceptual-distance=<float [-1.000000 .. 100.000000]>
 +
                                perceptual distance
 +
          perceptual distance to calculate perceptual weight
 +
      --sout-schro-enable-noarith=<integer [-1 .. 1]>
 +
                                Disable arithmetic coding
 +
          Use variable length codes instead, useful for very high bitrates
 +
      --sout-schro-horiz-slices=<integer [-1 .. 2147483647]>
 +
                                Horizontal slices per frame
 +
          Number of horizontal slices per frame in low delay mode
 +
      --sout-schro-vert-slices=<integer [-1 .. 2147483647]>
 +
                                Vertical slices per frame
 +
          Number of vertical slices per frame in low delay mode
 +
      --sout-schro-force-profile={auto,vc2_low_delay,vc2_simple,vc2_main,main}
 +
                                Force Profile
 +
          Force Profile
 +
 
 +
Intel QuickSync Video encoder for MPEG4-Part10/MPEG2 (aka H.264/H.262) (qsv)
 +
       --sout-qsv-software, --no-sout-qsv-software
 +
                                Enable software mode
 +
                                 (default disabled)
 +
           Allow the use of the Intel Media SDK software implementation of the
 +
          codecs if no QuickSync Video hardware acceleration is present on the
 +
          system.
 +
      --sout-qsv-h264-profile={decide,baseline,main,extended,high}
 +
                                Codec Profile
 +
          Specify the codec profile explicitly. If you don't, the codec will
 +
          determine the correct profile from other sources, such as resolution
 +
          and bitrate. E.g. 'high'
 +
      --sout-qsv-h264-level={decide,1,1.1b,1.2,1.3,2,2.1,2.2,3,3.1,3.2,4,4.1,4.2,5,5.1,5.2}
 +
                                Codec Level
 +
           Specify the codec level explicitly. If you don't, the codec will
 +
          determine the correct profile from other sources, such as resolution
 +
          and bitrate. E.g. '4.2' for mpeg4-part10 or 'low' for mpeg2
 +
      --sout-qsv-mpeg2-profile={decide,simple,main,high}
 +
                                Codec Profile
 +
          Specify the codec profile explicitly. If you don't, the codec will
 +
           determine the correct profile from other sources, such as resolution
 +
          and bitrate. E.g. 'high'
 +
      --sout-qsv-mpeg2-level={decide,low,main,high,high1440}
 +
                                Codec Level
 +
          Specify the codec level explicitly. If you don't, the codec will
 +
          determine the correct profile from other sources, such as resolution
 +
          and bitrate. E.g. '4.2' for mpeg4-part10 or 'low' for mpeg2
 +
      --sout-qsv-gop-size=<integer>
 +
                                Group of Picture size
 +
          Number of pictures within the current GOP (Group of Pictures); if
 +
          GopPicSize=0, then the GOP size is unspecified. If GopPicSize=1, only
 +
          I-frames are used.
 +
      --sout-qsv-gop-refdist=<integer>
 +
                                Group of Picture Reference Distance
 +
          Distance between I- or P- key frames; if it is zero, the GOP
 +
          structure is unspecified. Note: If GopRefDist = 1, there are no
 +
          B-frames used.
 +
      --sout-qsv-idr-interval=<integer>
 +
                                IDR interval
 +
          For H.264, IdrInterval specifies IDR-frame interval in terms of
 +
          I-frames; if IdrInterval=0, then every I-frame is an IDR-frame. If
 +
          IdrInterval=1, then every other I-frame is an IDR-frame, etc. For
 +
          MPEG2, IdrInterval defines sequence header interval in terms of
 +
          I-frames. If IdrInterval=N, SDK inserts the sequence header before
 +
          every Nth I-frame. If IdrInterval=0 (default), SDK inserts the
 +
          sequence header once at the beginning of the stream.
 +
      --sout-qsv-target-usage={decide,quality,balanced,speed}
 +
                                Target Usage
 +
          The target usage allow to choose between different trade-offs between
 +
          quality and speed. Allowed values are: 'speed', 'balanced' and
 +
          'quality'.
 +
      --sout-qsv-rc-method={cbr,vbr,qp,avbr}
 +
                                Rate Control Method
 +
          The rate control method to use when encoding. Can be one of 'cbr',
 +
          'vbr', 'qp', 'avbr'. 'qp' mode isn't supported for mpeg2.
 +
       --sout-qsv-qp=<integer [0 .. 51]>  
 +
                                 Quantization parameter
 +
           Quantization parameter for all types of frames. This parameters sets
 +
          qpi, qpp and qpb. It has less precedence than the forementionned
 +
          parameters. Used only if rc_method is 'qp'.
 +
      --sout-qsv-qpi=<integer [0 .. 51]>
 +
                                Quantization parameter for I-frames
 +
          Quantization parameter for I-frames. This parameter overrides any qp
 +
           set globally. Used only if rc_method is 'qp'.
 +
      --sout-qsv-qpp=<integer [0 .. 51]>
 +
                                Quantization parameter for P-frames
 +
          Quantization parameter for P-frames. This parameter overrides any qp
 +
          set globally. Used only if rc_method is 'qp'.
 +
       --sout-qsv-qpb=<integer [0 .. 51]>  
 +
                                 Quantization parameter for B-frames
 +
           Quantization parameter for B-frames. This parameter overrides any qp
 +
          set globally. Used only if rc_method is 'qp'.
 +
      --sout-qsv-bitrate-max=<integer>
 +
                                Maximum Bitrate
 +
          Defines the maximum bitrate in kbps (1000 bits/s) for VBR rate
 +
          control method. If not set, this parameter is computed from other
 +
           sources such as bitrate, profile, level, etc.
 +
       --sout-qsv-accuracy=<integer [0 .. 100]>  
 +
                                 Accuracy of RateControl
 +
           Tolerance in percentage of the 'avbr'  (Average Variable BitRate)
 +
           method. (e.g. 10 with a bitrate of 800  kbps means the encoder tries
 +
          not to  go above 880 kbps and under  730 kbps. The targeted accuracy
 +
          is only reached after a certained  convergence period. See the
 +
          convergence parameter
 +
       --sout-qsv-convergence=<integer>
 +
                                Convergence time of 'avbr' RateControl
 +
          Number of 100 frames before the 'avbr' rate control method reaches
 +
          the requested bitrate with the requested accuracy. See the accuracy
 +
          parameter.
 +
      --sout-qsv-num-slice=<integer>
 +
                                Number of slices per frame
 +
          Number of slices in each video frame; each slice contains one or more
 +
          macro-block rows. If numslice is not set, the encoder may choose any
 +
          slice partitioning allowed by the codec standard.
 +
      --sout-qsv-num-ref-frame=<integer>
 +
                                Number of reference frames
 +
          Number of reference frames
 +
      --sout-qsv-async-depth=<integer [1 .. 32]>  
 +
                                 Number of parallel operations
 +
           Defines the number of parallel encoding operations before we
 +
          synchronise the result. Higher numbers may result on better
 +
           throughput depending on hardware. MPEG2 needs at least 1 here.
  
−
  Blending benchmark filter
+
  Kate overlay decoder (kate)
−
  Benchmarking:
+
Kate is a codec for text and image based overlays.
−
      --blendbench-loops=<integer>
+
The Tiger rendering library is needed to render complex Kate streams, but VLC can still render static text and image based subtitles if it is not available.
−
                                Number of time to blend
+
Note that changing settings below will not take effect until a new stream is played. This will hopefully be fixed soon.
−
          The number of time the blend will be performed
+
       --kate-formatted, --no-kate-formatted
−
       --blendbench-alpha=<integer [0 .. 255]>
+
                                 Formatted Subtitles
−
                                Alpha of the blended image
+
                                 (default enabled)
−
          Alpha with which the blend image is blended
+
           Kate streams allow for text formatting. VLC partly implements this,
−
  Base image:
+
           but you can choose to disable all formatting. Note that this has no
−
      --blendbench-base-image=<string>
+
           effect is rendering via Tiger is enabled.
−
                                 Image to be blended onto
 
−
          The image which will be used to blend onto
 
−
      --blendbench-base-chroma=<string>
 
−
                                 Chroma for the base image
 
−
           Chroma which the base image will be loaded in
 
−
  Blend image:
 
−
      --blendbench-blend-image=<string>
 
−
                                Image which will be blended
 
−
           The image blended onto the base image
 
−
      --blendbench-blend-chroma=<string>
 
−
                                Chroma for the blend image
 
−
           Chroma which the blend image will be loadedin
 
  
−
  DirectShow DVB input
+
  JPEG image decoder (jpeg)
−
      --dvb-caching=<integer>   Caching value in ms
+
   Encoding:
−
          Caching value for DVB streams. This value should be set in
+
       --sout-jpeg-quality=<integer [0 .. 100]>
−
          milliseconds.
+
                                 Quality level
−
       --dvb-frequency=<integer>  Transponder/multiplex frequency
+
           Quality level for encoding (this can enlarge or reduce output image
−
          In kHz for DVB-S or Hz for DVB-C/T
+
           size).
−
      --dvb-network-name=<string>
 
−
                                Network Name
 
−
          Unique network name in the System Tuning Spaces
 
−
      --dvb-create-name=<string> Network Name to Create
 
−
          Create Unique name in the System Tuning Spaces
 
−
      --dvb-adapter=<integer>    Adapter card to tune
 
−
          Adapter cards have a device file in directory named
 
−
          /dev/dvb/adapter[n] with n>=0.
 
−
      --dvb-inversion={-1 (Undefined), 0 (Off), 1 (On), 2 (Auto)}
 
−
                                Inversion mode
 
−
          Inversion mode [0=off, 1=on, 2=auto]
 
−
      --dvb-polarisation={H,V,L,R}
 
−
                                 Satellite Polarisation
 
−
           Satellite Polarisation [H/V/L/R]
 
−
      --dvb-network-id=<integer> Network Identifier
 
−
      --dvb-azimuth=<integer>    Satellite Azimuth
 
−
          Satellite Azimuth in tenths of degree
 
−
      --dvb-elevation=<integer>  Satellite Elevation
 
−
          Satellite Elevation in tenths of degree
 
−
      --dvb-longitude=<integer>  Satellite Longitude
 
−
          Satellite Longitude in 10ths of degree, -ve=West
 
−
      --dvb-range=<string>      Satellite Range Code
 
−
          Satellite Range Code as defined by manufacturer e.g. DISEqC switch
 
−
          code
 
−
      --dvb-lnb-lof1=<integer>  Antenna lnb_lof1 (kHz)
 
−
          Low Band Local Osc Freq in kHz (usually 9.75GHz)
 
−
      --dvb-lnb-lof2=<integer>  Antenna lnb_lof2 (kHz)
 
−
           High Band Local Osc Freq in kHz (usually 10.6GHz)
 
−
      --dvb-lnb-slof=<integer>  Antenna lnb_slof (kHz)
 
−
          Low Noise Block switch freq in kHz (usually 11.7GHz)
 
−
      --dvb-srate=<integer>      Transponder symbol rate in kHz
 
−
      --dvb-modulation={-1 (Undefined), 16 (QAM16), 32 (QAM32), 64 (QAM64), 128 (QAM128), 256 (QAM256), 10002 (BPSK), 10004 (QPSK), 20008 (8VSB), 20016 (16VSB)}
 
−
                                Modulation type
 
−
          QAM, PSK or VSB modulation method
 
−
      --dvb-major-channel=<integer>
 
−
                                ATSC Major Channel
 
−
          ATSC Major Channel
 
−
      --dvb-minor-channel=<integer>
 
−
                                ATSC Minor Channel
 
−
          ATSC Minor Channel
 
−
      --dvb-physical-channel=<integer>
 
−
                                ATSC Physical Channel
 
−
          ATSC Physical Channel
 
−
      --dvb-code-rate-hp={-1 (Undefined), 1 (1/2), 2 (2/3), 3 (3/4), 4 (5/6), 5 (7/8)}
 
−
                                FEC rate
 
−
          FEC rate includes DVB-T high priority stream FEC Rate
 
−
      --dvb-code-rate-lp={-1 (Undefined), 1 (1/2), 2 (2/3), 3 (3/4), 4 (5/6), 5 (7/8)}
 
−
                                Terrestrial low priority stream code rate
 
−
                                (FEC)
 
−
          Low Priority FEC Rate [Undefined,1/2,2/3,3/4,5/6,7/8]
 
−
      --dvb-bandwidth={-1 (Undefined), 6 (6 MHz), 7 (7 MHz), 8 (8 MHz)}
 
−
                                Terrestrial bandwidth
 
−
          Terrestrial bandwidth [0=auto,6,7,8 in MHz]
 
−
      --dvb-guard={-1 (Undefined), 4 (1/4), 8 (1/8), 16 (1/16), 32 (1/32)}
 
−
                                Terrestrial guard interval
 
−
          Guard interval [Undefined,1/4,1/8,1/16,1/32]
 
−
      --dvb-transmission={-1 (Undefined), 2 (2k), 8 (8k)}
 
−
                                Terrestrial transmission mode
 
−
          Transmission mode [Undefined,2k,8k]
 
−
      --dvb-hierarchy={-1 (Undefined), 1 (1), 2 (2), 4 (4)}
 
−
                                Terrestrial hierarchy mode
 
−
          Hierarchy alpha value [Undefined,1,2,4]
 
  
−
  Ball video filter
+
  FluidSynth MIDI synthesizer (fluidsynth)
−
Augmented reality ball game
+
       --soundfont=<string>      SoundFont file
−
       --ball-color={red,green,blue,white}
+
           SoundFont file to use for software synthesis.
−
                                Ball color
+
       --synth-chorus, --no-synth-chorus
−
           Ball color, one of "red", "blue" and "green".
+
                                Chorus
−
       --ball-speed=<integer [1 .. 15]>
+
                                 (default enabled)
−
                                 Ball speed
+
           Chorus
−
           Set ball speed, the displacement value                             
+
       --synth-gain=<float [0.000000 .. 10.000000]>  
−
          in number of pixels by frame.
+
                                 Synthesis gain
−
       --ball-size=<integer [5 .. 30]>
+
           This gain is applied to synthesis output. High values may cause
−
                                 Ball size
+
          saturation when many notes are played at a time.
−
           Set ball size giving its radius in number                           
+
       --synth-polyphony=<integer [1 .. 65535]>  
−
              of pixels
+
                                 Polyphony
−
       --ball-gradient-threshold=<integer [1 .. 200]>
+
           The polyphony defines how many voices can be played at a time. Larger
−
                                 Gradient threshold
+
          values require more processing power.
−
           Set gradient threshold for edge computation.
+
       --synth-reverb, --no-synth-reverb
−
       --ball-edge-visible, --no-ball-edge-visible
+
                                Reverb
−
                                 Edge visible (default enabled)
+
                                 (default enabled)
−
           Set edge visibility. (default enabled)
+
           Reverb
 +
      --synth-sample-rate=<integer [22050 .. 96000]>
 +
                                Sample rate
 +
          Sample rate
  
−
  AVI demuxer
+
  DVB subtitles decoder (dvbsub)
−
       --avi-interleaved, --no-avi-interleaved
+
       --dvbsub-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
−
                                 Force interleaved method (default disabled)
+
                                 Subpicture position
−
           Force interleaved method. (default disabled)
+
          You can enforce the subpicture position on the video (0=center,
−
       --avi-index={0 (Ask for action), 1 (Always fix), 2 (Never fix)}
+
          1=left, 2=right, 4=top, 8=bottom, you can also use combinations of
−
                                Force index creation
+
           these values, e.g. 6=top-right).
−
           Recreate a index for the AVI file. Use this if your AVI file is
+
      --dvbsub-x=<integer>      Decoding X coordinate
−
           damaged or incomplete (not seekable).
+
          X coordinate of the rendered subtitle
 +
      --dvbsub-y=<integer>      Decoding Y coordinate
 +
          Y coordinate of the rendered subtitle
 +
      --sout-dvbsub-x=<integer>  Encoding X coordinate
 +
          X coordinate of the encoded subtitle
 +
       --sout-dvbsub-y=<integer>  Encoding Y coordinate
 +
          Y coordinate of the encoded subtitle
 +
 
 +
Dummy decoder (ddummy)
 +
      --dummy-save-es, --no-dummy-save-es
 +
                                Save raw codec data
 +
                                (default disabled)
 +
          Save the raw codec data if you have selected/forced the dummy decoder
 +
          in the main options.
 +
 
 +
DTS Coherent Acoustics audio decoder (dca)
 +
      --dts-dynrng, --no-dts-dynrng
 +
                                DTS dynamic range compression
 +
                                (default enabled)
 +
          Dynamic range compression makes the loud sounds softer, and the soft
 +
           sounds louder, so you can more easily listen to the stream in a noisy
 +
          environment without disturbing anyone. If you disable the dynamic
 +
          range compression the playback will be more adapted to a movie
 +
           theater or a listening room.
 +
 
 +
Closed Captions decoder (cc)
 +
      --cc-opaque, --no-cc-opaque
 +
                                Opacity
 +
                                (default enabled)
 +
          Setting to true makes the text to be boxed and maybe easier to read.
  
−
  FFmpeg audio/video decoder
+
  FFmpeg audio/video decoder (avcodec)
 
  Various audio and video decoders/encoders delivered by the FFmpeg library. This includes (MS)MPEG4, DivX, SV1,H261, H263, H264, WMV, WMA, AAC, AMR, DV, MJPEG and other codecs
 
  Various audio and video decoders/encoders delivered by the FFmpeg library. This includes (MS)MPEG4, DivX, SV1,H261, H263, H264, WMV, WMA, AAC, AMR, DV, MJPEG and other codecs
 
   Decoding:
 
   Decoding:
−
       --ffmpeg-dr, --no-ffmpeg-dr
+
       --avcodec-dr, --no-avcodec-dr  
−
                                 Direct rendering (default enabled)
+
                                 Direct rendering
−
           Direct rendering (default enabled)
+
                                (default enabled)
−
       --ffmpeg-error-resilience=<integer>
+
           Direct rendering
 +
      --avcodec-corrupted, --no-avcodec-corrupted
 +
                                Show corrupted frames
 +
                                (default enabled)
 +
          Prefer visual artifacts instead of missing frames
 +
       --avcodec-error-resilience=<integer>  
 
                                 Error resilience
 
                                 Error resilience
−
           FFmpeg can do error resilience.
+
           libavcodec can do error resilience. However, with a buggy encoder
−
However, with a buggy encoder (such
+
          (such as the ISO MPEG-4 encoder from M$) this can produce a lot of
−
          as the ISO MPEG-4 encoder from M$) this can produce a lot of
+
           errors. Valid values range from 0 to 4 (0 disables all errors
−
           errors.
 
−
Valid values range from 0 to 4 (0 disables all errors
 
 
           resilience).
 
           resilience).
−
       --ffmpeg-workaround-bugs=<integer>
+
       --avcodec-workaround-bugs=<integer>  
 
                                 Workaround bugs
 
                                 Workaround bugs
−
           Try to fix some bugs:
+
           Try to fix some bugs: 1  autodetect 2  old msmpeg4 4  xvid interlaced
−
1  autodetect
+
           8  ump4 16 no padding 32 ac vlc 64 Qpel chroma. This must be the sum
−
2  old msmpeg4
+
          of the values. For example, to fix "ac vlc" and "ump4", enter 40.
−
4  xvid
+
       --avcodec-hurry-up, --no-avcodec-hurry-up  
−
           interlaced
+
                                 Hurry up
−
8  ump4  
+
                                (default enabled)
−
16 no padding
 
−
32 ac vlc
 
−
64 Qpel chroma.
 
−
This must
 
−
          be the sum of the values. For example, to fix "ac vlc" and "ump4",
 
−
          enter 40.
 
−
       --ffmpeg-hurry-up, --no-ffmpeg-hurry-up
 
−
                                 Hurry up (default enabled)
 
 
           The decoder can partially decode or skip frame(s) when there is not
 
           The decoder can partially decode or skip frame(s) when there is not
 
           enough time. It's useful with low CPU power but it can produce
 
           enough time. It's useful with low CPU power but it can produce
−
           distorted pictures. (default enabled)
+
           distorted pictures.
−
       --ffmpeg-skip-frame=<integer [-1 .. 4]>
+
       --avcodec-skip-frame={-1 (None), 0 (Default), 1 (Non-ref), 2 (Bidir), 3 (Non-key), 4 (All)}
 
                                 Skip frame (default=0)
 
                                 Skip frame (default=0)
 
           Force skipping of frames to speed up decoding (-1=None, 0=Default,
 
           Force skipping of frames to speed up decoding (-1=None, 0=Default,
 
           1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
 
           1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
−
       --ffmpeg-skip-idct=<integer [-1 .. 4]>
+
       --avcodec-skip-idct=<integer [-1 .. 4]>  
 
                                 Skip idct (default=0)
 
                                 Skip idct (default=0)
−
           Force skipping of idct to speed up decoding for frame types(-1=None,
+
           Force skipping of idct to speed up decoding for frame types (-1=None,
 
           0=Default, 1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
 
           0=Default, 1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
−
       --ffmpeg-vismv=<integer>  Visualize motion vectors
+
       --avcodec-fast, --no-avcodec-fast  
−
          You can overlay the motion vectors (arrows showing how the images
+
                                 Allow speed tricks
−
          move) on the image. This value is a mask, based on these values:
+
                                (default disabled)
−
1 -
 
−
          visualize forward predicted MVs of P frames
 
−
2 - visualize forward
 
−
          predicted MVs of B frames
 
−
4 - visualize backward predicted MVs of B
 
−
          frames
 
−
To visualize all vectors, the value should be 7.
 
−
      --ffmpeg-lowres=<integer [0 .. 2]>
 
−
                                Low resolution decoding
 
−
          Only decode a low resolution version of the video. This requires less
 
−
          processing power
 
−
      --ffmpeg-fast, --no-ffmpeg-fast
 
−
                                 Allow speed tricks (default disabled)
 
 
           Allow non specification compliant speedup tricks. Faster but
 
           Allow non specification compliant speedup tricks. Faster but
−
           error-prone. (default disabled)
+
           error-prone.
−
       --ffmpeg-skiploopfilter={0 (None), 1 (Non-ref), 2 (Bidir), 3 (Non-key), 4 (All)}
+
       --avcodec-skiploopfilter={0 (None), 1 (Non-ref), 2 (Bidir), 3 (Non-key), 4 (All)}  
 
                                 Skip the loop filter for H.264 decoding
 
                                 Skip the loop filter for H.264 decoding
 
           Skipping the loop filter (aka deblocking) usually has a detrimental
 
           Skipping the loop filter (aka deblocking) usually has a detrimental
 
           effect on quality. However it provides a big speedup for high
 
           effect on quality. However it provides a big speedup for high
 
           definition streams.
 
           definition streams.
−
       --ffmpeg-debug=<integer>   Debug mask
+
       --avcodec-debug=<integer> Debug mask
 
           Set FFmpeg debug mask
 
           Set FFmpeg debug mask
−
       --ffmpeg-hw, --no-ffmpeg-hw
+
       --avcodec-codec=<string>  Codec name
−
                                 Hardware decoding (default disabled)
+
          Internal libavcodec codec name
−
           This allows hardware decoding when available. (default disabled)
+
      --avcodec-hw={any,d3d11va,dxva2,none}
 +
                                 Hardware decoding
 +
           This allows hardware decoding when available.
 +
      --avcodec-threads=<integer>
 +
                                Threads
 +
          Number of threads used for decoding, 0 meaning auto
 +
      --avcodec-options=<string> Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
 
   Encoding:
 
   Encoding:
−
       --sout-ffmpeg-hq={rd,bits,simple}
+
       --sout-avcodec-codec=<string>
 +
                                Codec name
 +
          Internal libavcodec codec name
 +
      --sout-avcodec-hq={rd,bits,simple}  
 
                                 Quality level
 
                                 Quality level
 
           Quality level for the encoding of motions vectors (this can slow down
 
           Quality level for the encoding of motions vectors (this can slow down
 
           the encoding very much).
 
           the encoding very much).
−
       --sout-ffmpeg-keyint=<integer>
+
       --sout-avcodec-keyint=<integer>  
 
                                 Ratio of key frames
 
                                 Ratio of key frames
 
           Number of frames that will be coded for one key frame.
 
           Number of frames that will be coded for one key frame.
−
       --sout-ffmpeg-bframes=<integer>
+
       --sout-avcodec-bframes=<integer>  
 
                                 Ratio of B frames
 
                                 Ratio of B frames
 
           Number of B frames that will be coded between two reference frames.
 
           Number of B frames that will be coded between two reference frames.
−
       --sout-ffmpeg-hurry-up, --no-sout-ffmpeg-hurry-up
+
       --sout-avcodec-hurry-up, --no-sout-avcodec-hurry-up  
−
                                 Hurry up (default disabled)
+
                                 Hurry up
 +
                                (default disabled)
 
           The encoder can make on-the-fly quality tradeoffs if your CPU can't
 
           The encoder can make on-the-fly quality tradeoffs if your CPU can't
 
           keep up with the encoding rate. It will disable trellis quantization,
 
           keep up with the encoding rate. It will disable trellis quantization,
 
           then the rate distortion of motion vectors (hq), and raise the noise
 
           then the rate distortion of motion vectors (hq), and raise the noise
−
           reduction threshold to ease the encoder's task. (default disabled)
+
           reduction threshold to ease the encoder's task.
−
       --sout-ffmpeg-interlace, --no-sout-ffmpeg-interlace
+
       --sout-avcodec-interlace, --no-sout-avcodec-interlace  
−
                                 Interlaced encoding (default disabled)
+
                                 Interlaced encoding
−
           Enable dedicated algorithms for interlaced frames. (default disabled)
+
                                (default disabled)
−
       --sout-ffmpeg-interlace-me, --no-sout-ffmpeg-interlace-me
+
           Enable dedicated algorithms for interlaced frames.
−
                                 Interlaced motion estimation (default enabled)
+
       --sout-avcodec-interlace-me, --no-sout-avcodec-interlace-me  
 +
                                 Interlaced motion estimation
 +
                                (default enabled)
 
           Enable interlaced motion estimation algorithms. This requires more
 
           Enable interlaced motion estimation algorithms. This requires more
−
           CPU. (default enabled)
+
           CPU.
−
       --sout-ffmpeg-vt=<integer> Video bitrate tolerance
+
       --sout-avcodec-vt=<integer>  
 +
                                Video bitrate tolerance
 
           Video bitrate tolerance in kbit/s.
 
           Video bitrate tolerance in kbit/s.
−
       --sout-ffmpeg-pre-me, --no-sout-ffmpeg-pre-me
+
       --sout-avcodec-pre-me, --no-sout-avcodec-pre-me  
−
                                 Pre-motion estimation (default disabled)
+
                                 Pre-motion estimation
−
           Enable the pre-motion estimation algorithm. (default disabled)
+
                                (default disabled)
−
       --sout-ffmpeg-rc-buffer-size=<integer>
+
           Enable the pre-motion estimation algorithm.
 +
       --sout-avcodec-rc-buffer-size=<integer>  
 
                                 Rate control buffer size
 
                                 Rate control buffer size
 
           Rate control buffer size (in kbytes). A bigger buffer will allow for
 
           Rate control buffer size (in kbytes). A bigger buffer will allow for
 
           better rate control, but will cause a delay in the stream.
 
           better rate control, but will cause a delay in the stream.
−
       --sout-ffmpeg-rc-buffer-aggressivity=<float>
+
       --sout-avcodec-rc-buffer-aggressivity=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 Rate control buffer aggressiveness
 
                                 Rate control buffer aggressiveness
 
           Rate control buffer aggressiveness.
 
           Rate control buffer aggressiveness.
−
       --sout-ffmpeg-i-quant-factor=<float>
+
       --sout-avcodec-i-quant-factor=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 I quantization factor
 
                                 I quantization factor
 
           Quantization factor of I frames, compared with P frames (for instance
 
           Quantization factor of I frames, compared with P frames (for instance
 
           1.0 => same qscale for I and P frames).
 
           1.0 => same qscale for I and P frames).
−
       --sout-ffmpeg-noise-reduction=<integer>
+
       --sout-avcodec-noise-reduction=<integer>  
 
                                 Noise reduction
 
                                 Noise reduction
 
           Enable a simple noise reduction algorithm to lower the encoding
 
           Enable a simple noise reduction algorithm to lower the encoding
 
           length and bitrate, at the expense of lower quality frames.
 
           length and bitrate, at the expense of lower quality frames.
−
       --sout-ffmpeg-mpeg4-matrix, --no-sout-ffmpeg-mpeg4-matrix
+
       --sout-avcodec-mpeg4-matrix, --no-sout-avcodec-mpeg4-matrix  
−
                                 MPEG4 quantization matrix (default disabled)
+
                                 MPEG4 quantization matrix
 +
                                (default disabled)
 
           Use the MPEG4 quantization matrix for MPEG2 encoding. This generally
 
           Use the MPEG4 quantization matrix for MPEG2 encoding. This generally
 
           yields a better looking picture, while still retaining the
 
           yields a better looking picture, while still retaining the
−
           compatibility with standard MPEG2 decoders. (default disabled)
+
           compatibility with standard MPEG2 decoders.
−
       --sout-ffmpeg-qmin=<integer>
+
       --sout-avcodec-qmin=<integer>  
 
                                 Minimum video quantizer scale
 
                                 Minimum video quantizer scale
 
           Minimum video quantizer scale.
 
           Minimum video quantizer scale.
−
       --sout-ffmpeg-qmax=<integer>
+
       --sout-avcodec-qmax=<integer>  
 
                                 Maximum video quantizer scale
 
                                 Maximum video quantizer scale
 
           Maximum video quantizer scale.
 
           Maximum video quantizer scale.
−
       --sout-ffmpeg-trellis, --no-sout-ffmpeg-trellis
+
       --sout-avcodec-trellis, --no-sout-avcodec-trellis  
−
                                 Trellis quantization (default disabled)
+
                                 Trellis quantization
 +
                                (default disabled)
 
           Enable trellis quantization (rate distortion for block coefficients).
 
           Enable trellis quantization (rate distortion for block coefficients).
−
          (default disabled)
+
       --sout-avcodec-qscale=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
       --sout-ffmpeg-qscale=<float>
 
 
                                 Fixed quantizer scale
 
                                 Fixed quantizer scale
 
           A fixed video quantizer scale for VBR encoding (accepted values: 0.01
 
           A fixed video quantizer scale for VBR encoding (accepted values: 0.01
 
           to 255.0).
 
           to 255.0).
−
       --sout-ffmpeg-strict=<integer>
+
       --sout-avcodec-strict=<integer [-2 .. 2]>  
 
                                 Strict standard compliance
 
                                 Strict standard compliance
−
           Force a strict standard compliance when encoding (accepted values:
+
           Force a strict standard compliance when encoding (accepted values: -2
−
           -1, 0, 1).
+
           to 2).
−
       --sout-ffmpeg-lumi-masking=<float>
+
       --sout-avcodec-lumi-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 Luminance masking
 
                                 Luminance masking
 
           Raise the quantizer for very bright macroblocks (default: 0.0).
 
           Raise the quantizer for very bright macroblocks (default: 0.0).
−
       --sout-ffmpeg-dark-masking=<float>
+
       --sout-avcodec-dark-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 Darkness masking
 
                                 Darkness masking
 
           Raise the quantizer for very dark macroblocks (default: 0.0).
 
           Raise the quantizer for very dark macroblocks (default: 0.0).
−
       --sout-ffmpeg-p-masking=<float>
+
       --sout-avcodec-p-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 Motion masking
 
                                 Motion masking
 
           Raise the quantizer for macroblocks with a high temporal complexity
 
           Raise the quantizer for macroblocks with a high temporal complexity
 
           (default: 0.0).
 
           (default: 0.0).
−
       --sout-ffmpeg-border-masking=<float>
+
       --sout-avcodec-border-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 
                                 Border masking
 
                                 Border masking
 
           Raise the quantizer for macroblocks at the border of the frame
 
           Raise the quantizer for macroblocks at the border of the frame
 
           (default: 0.0).
 
           (default: 0.0).
−
       --sout-ffmpeg-luma-elim-threshold=<integer>
+
       --sout-avcodec-luma-elim-threshold=<integer>  
 
                                 Luminance elimination
 
                                 Luminance elimination
 
           Eliminates luminance blocks when the PSNR isn't much changed
 
           Eliminates luminance blocks when the PSNR isn't much changed
 
           (default: 0.0). The H264 specification recommends -4.
 
           (default: 0.0). The H264 specification recommends -4.
−
       --sout-ffmpeg-chroma-elim-threshold=<integer>
+
       --sout-avcodec-chroma-elim-threshold=<integer>  
 
                                 Chrominance elimination
 
                                 Chrominance elimination
 
           Eliminates chrominance blocks when the PSNR isn't much changed
 
           Eliminates chrominance blocks when the PSNR isn't much changed
 
           (default: 0.0). The H264 specification recommends 7.
 
           (default: 0.0). The H264 specification recommends 7.
−
       --sout-ffmpeg-aac-profile=<string>
+
       --sout-avcodec-aac-profile=<string>  
 
                                 Specify AAC audio profile to use
 
                                 Specify AAC audio profile to use
 
           Specify the AAC audio profile to use for encoding the audio
 
           Specify the AAC audio profile to use for encoding the audio
 
           bitstream. It takes the following options: main, low, ssr (not
 
           bitstream. It takes the following options: main, low, ssr (not
−
           supported) and ltp (default: main)
+
           supported),ltp, hev1, hev2 (default: low). hev1 and hev2 are
−
       --ffmpeg-mux=<string>     Ffmpeg mux
+
          currently supported only with libfdk-aac enabled libavcodec
−
           Force use of ffmpeg muxer.
+
      --sout-avcodec-options=<string>
 +
                                Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
 +
  Demuxer:
 +
      --avformat-format=<string> Format name
 +
          Internal libavcodec format name
 +
      --avformat-options=<string>
 +
                                Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
 +
  Muxer:
 +
       --sout-avformat-mux=<string>  
 +
                                Avformat mux
 +
           Force use of a specific avformat muxer.
 +
      --sout-avformat-options=<string>
 +
                                Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
 +
  Input:
 +
      --avio-options=<string>    Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
 +
  Stream output:
 +
      --sout-avio-options=<string>
 +
                                Advanced options
 +
          Advanced options, in the form {opt=val,opt2=val2}.
  
−
  Submission of played songs to last.fm
+
  ARIB subtitles decoder (aribsub)
−
       --lastfm-username=<string> Username
+
       --aribsub-ignore-ruby, --no-aribsub-ignore-ruby
−
           The username of your last.fm account
+
                                Ignore ruby (furigana)
−
       --lastfm-password=<string> Password
+
                                (default disabled)
−
          The password of your last.fm account
+
           Ignore ruby (furigana) in the subtitle.
−
      --scrobbler-url=<string>  Scrobbler URL
+
       --aribsub-use-coretext, --no-aribsub-use-coretext
−
           The URL set for an alternative scrobbler engine
+
                                Use Core Text renderer
 +
                                (default disabled)
 +
           Use Core Text renderer in the subtitle.
  
−
  Audio Bar Graph Video sub filter
+
  ATSC A/52 (AC-3) audio decoder (a52)
−
      --audiobargraph_v-i_values=<string>
+
       --a52-dynrng, --no-a52-dynrng
−
                                Value of the audio channels levels
+
                                 A/52 dynamic range compression
−
          Value of the audio level of each channels between 0 and 1Each level
+
                                 (default enabled)
−
          should be separated with ':'.
+
           Dynamic range compression makes the loud sounds softer, and the soft
−
       --audiobargraph_v-x=<integer>
+
           sounds louder, so you can more easily listen to the stream in a noisy
−
                                X coordinate
+
           environment without disturbing anyone. If you disable the dynamic
−
          X coordinate of the bargraph.
+
           range compression the playback will be more adapted to a movie
−
      --audiobargraph_v-y=<integer>
+
           theater or a listening room.
−
                                 Y coordinate
 
−
          Y coordinate of the bargraph.
 
−
      --audiobargraph_v-transparency=<integer [0 .. 255]>
 
−
                                 Transparency of the bargraph
 
−
          Bargraph transparency value (from 0 for full transparency to 255 for
 
−
          full opacity).
 
−
      --audiobargraph_v-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
 
−
                                Bargraph position
 
−
           Enforce the bargraph position on the video (0=center, 1=left,
 
−
           2=right, 4=top, 8=bottom, you can also use combinations of these
 
−
           values, eg 6 = top-right).
 
−
      --audiobargraph_v-alarm=<integer>
 
−
                                Alarm
 
−
           Signals a silence and displays and alert (0=no alarm, 1=alarm).
 
−
      --audiobargraph_v-barWidth=<integer>
 
−
                                Bar width in pixel (default : 10)
 
−
          Width in pixel of each bar in the BarGraph to be displayed (default :
 
−
           10).
 
  
−
  Audio part of the BarGraph function
+
  WaveOut audio output (waveout)
−
       --audiobargraph_a-address=<string>
+
       --waveout-audio-device={wavemapper,Speakers (ASUS Xonar DG Audio D ($1,$64),S/PDIF Pass-through Device (ASU ($1,$64),CABLE Input (VB-Audio Virtual C ($1,$64)}
−
                                TCP address to use (default localhost)
+
                                Select Audio Device
−
          TCP address to use to communicate with the video part of the Bar
+
           Select special Audio device, or let windows decide (default), change
−
          Graph (default localhost).In the case of bargraph incrustation, use
+
          needs VLC restart to apply.
−
          localhost.
+
       --waveout-volume=<float [0.000000 .. 2.000000]>  
−
      --audiobargraph_a-port=<integer>
+
                                 Audio volume
−
                                TCP port to use (default 12345)
+
       --waveout-float32, --no-waveout-float32
−
          TCP port to use to communicate with the video part of the Bar Graph
+
                                 Use float32 output
−
          (default 12345).Use the same port as the one used in the rc interface.
+
                                 (default enabled)
−
      --audiobargraph_a-bargraph=<integer>
+
           The option allows you to enable or disable the high-quality float32
−
                                Defines if BarGraph information should be
+
           audio output mode (which is not well supported by some soundcards).
−
                                sent (default 1)
+
       --waveout-audio-channels=<integer [1 .. 9]>  
−
          Defines if BarGraph information should be sent. 1 if the information
+
                                 Audio output channels
−
           should be sent, 0 otherwise (default 1).
+
           Channels available for audio output. If the input has more channels
−
       --audiobargraph_a-bargraph_repetition=<integer>
+
           than the output, it will be down-mixed. This parameter is ignored
−
                                 Sends the barGraph information every n audio
+
           when digital pass-through is active.
−
                                packets (default 4)
 
−
          Defines how often the barGraph information should be sent. Sends the
 
−
          barGraph information every n audio packets (default 4).
 
−
       --audiobargraph_a-silence=<integer>
 
−
                                 Defines if silence alarm information should
 
−
                                 be sent (default 1)
 
−
           Defines if silence alarm information should be sent. 1 if the
 
−
           information should be sent, 0 otherwise (default 1).
 
−
       --audiobargraph_a-time_window=<integer>
 
−
                                Time window to use in ms (default 5000)
 
−
          Time Window during when the audio level is measured in ms for silence
 
−
          detection. If the audio level is under the threshold during this
 
−
          time, an alarm is sent (default 5000).
 
−
      --audiobargraph_a-alarm_threshold=<float>
 
−
                                 Minimum Audio level to raise the alarm
 
−
                                (default 0.1)
 
−
           Threshold to be attained to raise an alarm. If the audio level is
 
−
           under the threshold during this time, an alarm is sent (default 0.1).
 
−
      --audiobargraph_a-repetition_time=<integer>
 
−
                                Time between two alarm messages in ms
 
−
                                (default 2000)
 
−
          Time between two alarm messages in ms. This value is used to avoid
 
−
           alarm saturation (default 2000).
 
−
      --audiobargraph_a-connection_reset=<integer>
 
−
                                Force connection reset regularly (default 1)
 
−
          Defines if the TCP connection should be reset. This is to be used
 
−
          when using with audiobargraph_v (default 1).
 
  
−
  AtmoLight Filter
+
  Windows Multimedia Device output (mmdevice)
−
This module allows to control an so called AtmoLight device connected to your computer.
+
      --mmdevice-backend={any,wasapi,directsound,none}
−
AtmoLight is the homegrown version of what Philips calls AmbiLight.
+
                                Output back-end
−
If you need further information feel free to visit us at
+
          Audio output back-end interface.
−
 
+
       --mmdevice-passthrough={0 (Disabled), 1 (Enabled (without HD codecs)), 2 (Enabled)}  
−
http://www.vdr-wiki.de/wiki/index.php/Atmo-plugin
+
                                 HDMI/SPDIF audio passthrough
−
http://www.vdr-wiki.de/wiki/index.php/AtmoWin
+
           Change this value if you have issue with HD codecs when using a HDMI
−
 
+
           receiver.
−
You can find there detailed descriptions on how to build it for yourself and where to get the required parts.
+
       --mmdevice-audio-device={,{0.0.0.00000000}.{435351ed-7f2a-4588-83d5-d460b7fa5fa7},{0.0.0.00000000}.{4b187877-fc84-4130-b74c-87ece9e3eb5f},{0.0.0.00000000}.{ecb415c9-9835-4a9d-b618-104e7179b206}}
−
You can also have a look at pictures and some movies showing such a device in live action.
+
                                 Output device
−
  Choose Devicetype and Connection:
+
           Select your audio output device
−
       --atmo-device={0 (AtmoWin Software), 1 (Classic AtmoLight), 2 (Quattro AtmoLight), 3 (DMX), 4 (MoMoLight), 5 (fnordlicht)}
+
       --mmdevice-volume=<float [0.000000 .. 1.250000]>  
−
                                 Device type
+
                                 Audio volume
−
          Choose your preferred hardware from the list, or choose AtmoWin
+
           Audio volume in hundredths of decibels (dB).
−
          Software to delegate processing to the external process - with more
 
−
          options
 
−
      --atmo-serialdev=<string>  Serial Port/Device
 
−
          Name of the serial port where the AtmoLight controller is attached
 
−
          to.
 
−
On Windows usually something like COM1 or COM2. On Linux
 
−
          /dev/ttyS01 f.e.
 
−
      --atmo-atmowinexe=<string> Filename of AtmoWin*.exe
 
−
           if you want the AtmoLight control software to be launched by VLC,
 
−
          enter the complete path of AtmoWinA.exe here.
 
−
  Illuminate the room with this color on pause:
 
−
      --atmo-usepausecolor, --no-atmo-usepausecolor
 
−
                                Color when paused (default disabled)
 
−
          Set the color to show if the user pauses the video. (Have light to
 
−
          get another beer?) (default disabled)
 
−
      --atmo-pcolor-red=<integer [0 .. 255]>
 
−
                                Pause-Red
 
−
          Red component of the pause color
 
−
      --atmo-pcolor-green=<integer [0 .. 255]>
 
−
                                Pause-Green
 
−
          Green component of the pause color
 
−
      --atmo-pcolor-blue=<integer [0 .. 255]>
 
−
                                Pause-Blue
 
−
          Blue component of the pause color
 
−
      --atmo-fadesteps=<integer [1 .. 250]>
 
−
                                Pause-Fadesteps
 
−
          Number of steps to change current color to pause color (each step
 
−
           takes 40ms)
 
−
  Illuminate the room with this color on shutdown:
 
−
      --atmo-ecolor-red=<integer [0 .. 255]>
 
−
                                End-Red
 
−
          Red component of the shutdown color
 
−
       --atmo-ecolor-green=<integer [0 .. 255]>
 
−
                                End-Green
 
−
          Green component of the shutdown color
 
−
      --atmo-ecolor-blue=<integer [0 .. 255]>
 
−
                                End-Blue
 
−
          Blue component of the shutdown color
 
−
      --atmo-efadesteps=<integer [1 .. 250]>
 
−
                                End-Fadesteps
 
−
          Number of steps to change current color to end color for dimming up
 
−
          the light in cinema style... (each step takes 40ms)
 
−
  DMX options:
 
−
      --atmo-dmx-channels=<integer [1 .. 64]>
 
−
                                Count of AtmoLight channels
 
−
          How many AtmoLight channels, should be emulated with that DMX device
 
−
      --atmo-dmx-chbase=<string> DMX address for each channel
 
−
          Define here the DMX base address for each channel use , or ; to
 
−
          separate the values
 
−
  MoMoLight options:
 
−
      --atmo-momo-channels=<integer [3 .. 4]>
 
−
                                Count of channels
 
−
          Depending on your MoMoLight hardware choose 3 or 4 channels
 
−
  fnordlicht options:
 
−
      --atmo-fnordlicht-amount=<integer [1 .. 4]>
 
−
                                Count of fnordlicht's
 
−
          Depending on the amount your fnordlicht hardware choose 1 to 4
 
−
          channels
 
−
  Zone Layout for the build-in Atmo:
 
−
      --atmo-zones-top=<integer [0 .. 16]>
 
−
                                Number of zones on top
 
−
          Number of zones on the top of the screen
 
−
      --atmo-zones-bottom=<integer [0 .. 16]>
 
−
                                Number of zones on bottom
 
−
          Number of zones on the bottom of the screen
 
−
      --atmo-zones-lr=<integer [0 .. 16]>
 
−
                                Zones on left / right side
 
−
          left and right side having allways the same number of zones
 
−
      --atmo-zone-summary, --no-atmo-zone-summary
 
−
                                Calculate a average zone (default disabled)
 
−
          it contains the average of all pixels in the sample image (only
 
−
          useful for single channel AtmoLight) (default disabled)
 
−
  Settings for the built-in Live Video Processor only:
 
−
      --atmo-edgeweightning=<integer [1 .. 30]>
 
−
                                Edge Weightning
 
−
          Increasing this value will result in color more depending on the
 
−
          border of the frame.
 
−
      --atmo-brightness=<integer [50 .. 300]>
 
−
                                Brightness
 
−
          Overall brightness of your LED stripes
 
−
      --atmo-darknesslimit=<integer [0 .. 10]>
 
−
                                Darkness Limit
 
−
          Pixels with a saturation lower than this will be ignored. Should be
 
−
          greater than one for letterboxed videos.
 
−
      --atmo-huewinsize=<integer [0 .. 5]>
 
−
                                Hue windowing
 
−
          Used for statistics.
 
−
      --atmo-satwinsize=<integer [0 .. 5]>
 
−
                                Sat windowing
 
−
          Used for statistics.
 
−
      --atmo-filtermode={0 (No Filtering), 1 (Combined), 2 (Percent)}
 
−
                                Output Color filter mode
 
−
          defines the how the output color should be calculated based on
 
−
          previous color
 
−
      --atmo-meanlength=<integer [300 .. 5000]>
 
−
                                Filter length (ms)
 
−
          Time it takes until a color is completely changed. This prevents
 
−
          flickering.
 
−
      --atmo-meanthreshold=<integer [1 .. 100]>
 
−
                                Filter threshold
 
−
          How much a color has to be changed for an immediate color change.
 
−
      --atmo-percentnew=<integer [1 .. 100]>
 
−
                                Filter Smoothness (in %)
 
−
          Filter Smoothness
 
−
      --atmo-framedelay=<integer [0 .. 200]>
 
−
                                Frame delay (ms)
 
−
          Helps to get the video output and the light effects in sync. Values
 
−
          around 20ms should do the trick.
 
−
  Change channel assignment (fixes wrong wiring):
 
−
      --atmo-channel_0={-1 (disabled), 4 (Zone 4:summary), 3 (Zone 3:left), 1 (Zone 1:right), 0 (Zone 0:top), 2 (Zone 2:bottom)}
 
−
                                Channel 0: summary
 
−
          Maps the hardware channel X to logical zone Y to fix wrong wiring :-)
 
−
      --atmo-channel_1={-1 (disabled), 4 (Zone 4:summary), 3 (Zone 3:left), 1 (Zone 1:right), 0 (Zone 0:top), 2 (Zone 2:bottom)}
 
−
                                Channel 1: left
 
−
          Maps the hardware channel X to logical zone Y to fix wrong wiring :-)
 
−
      --atmo-channel_2={-1 (disabled), 4 (Zone 4:summary), 3 (Zone 3:left), 1 (Zone 1:right), 0 (Zone 0:top), 2 (Zone 2:bottom)}
 
−
                                Channel 2: right
 
−
          Maps the hardware channel X to logical zone Y to fix wrong wiring :-)
 
−
      --atmo-channel_3={-1 (disabled), 4 (Zone 4:summary), 3 (Zone 3:left), 1 (Zone 1:right), 0 (Zone 0:top), 2 (Zone 2:bottom)}
 
−
                                Channel 3: top
 
−
          Maps the hardware channel X to logical zone Y to fix wrong wiring :-)
 
−
      --atmo-channel_4={-1 (disabled), 4 (Zone 4:summary), 3 (Zone 3:left), 1 (Zone 1:right), 0 (Zone 0:top), 2 (Zone 2:bottom)}
 
−
                                Channel 4: bottom
 
−
          Maps the hardware channel X to logical zone Y to fix wrong wiring :-)
 
−
      --atmo-channels=<string>  Channel / Zone Assignment
 
−
          for devices with more than five channels / zones write down here for
 
−
          each channel the zone number to show and separate the values with ,
 
−
          or ; and use -1 to not use some channels. For the classic AtmoLight
 
−
          the sequence 4,3,1,0,2 would set the default channel/zone mapping.
 
−
          Having only two zones on top, and one zone on left and right and no
 
−
          summary zone the mapping for classic AtmoLight would be -1,3,2,1,0
 
−
  Adjust the white light to your LED stripes:
 
−
      --atmo-whiteadj, --no-atmo-whiteadj
 
−
                                Use Software White adjust (default enabled)
 
−
          Should the buildin driver do a white adjust or your LED stripes?
 
−
          recommend. (default enabled)
 
−
      --atmo-white-red=<integer [0 .. 255]>
 
−
                                White Red
 
−
          Red value of a pure white on your LED stripes.
 
−
      --atmo-white-green=<integer [0 .. 255]>
 
−
                                 White Green
 
−
           Green value of a pure white on your LED stripes.
 
−
       --atmo-white-blue=<integer [0 .. 255]>
 
−
                                White Blue
 
−
          Blue value of a pure white on your LED stripes.
 
−
  Change gradients:
 
−
      --atmo-gradient_zone_0=<string>
 
−
                                Zone 0: Top gradient
 
−
          Defines a small bitmap with 64x48 pixels, containing a grayscale
 
−
          gradient
 
−
      --atmo-gradient_zone_1=<string>
 
−
                                Zone 1: Right gradient
 
−
          Defines a small bitmap with 64x48 pixels, containing a grayscale
 
−
          gradient
 
−
      --atmo-gradient_zone_2=<string>
 
−
                                Zone 2: Bottom gradient
 
−
          Defines a small bitmap with 64x48 pixels, containing a grayscale
 
−
          gradient
 
−
      --atmo-gradient_zone_3=<string>
 
−
                                Zone 3: Left gradient
 
−
          Defines a small bitmap with 64x48 pixels, containing a grayscale
 
−
          gradient
 
−
      --atmo-gradient_zone_4=<string>
 
−
                                Zone 4: Summary gradient
 
−
          Defines a small bitmap with 64x48 pixels, containing a grayscale
 
−
          gradient
 
−
      --atmo-gradient_path=<string>
 
−
                                Gradient bitmap searchpath
 
−
          Now preferred option to assign gradient bitmaps, put them as
 
−
          zone_0.bmp, zone_1.bmp etc. into one folder and set the foldername
 
−
          here
 
−
      --atmo-width=<integer [64 .. 512]>
 
−
                                 Extracted Image Width
 
−
           The width of the mini image for further processing (64 is default)
 
−
      --atmo-height=<integer [48 .. 384]>
 
−
                                Extracted Image Height
 
−
          The height of the mini image for further processing (48 is default)
 
−
      --atmo-showdots, --no-atmo-showdots
 
−
                                Mark analyzed pixels (default disabled)
 
−
          makes the sample grid visible on screen as white pixels (default
 
−
          disabled)
 
  
−
  File audio output
+
  DirectX audio output (directsound)
−
       --audiofile-format={u8,s8,u16,s16,u16_le,s16_le,u16_be,s16_be,fixed32,float32,spdif}
+
       --directx-audio-device={,{ECB415C9-9835-4A9D-B618-104E7179B206},{435351ED-7F2A-4588-83D5-D460B7FA5FA7},{4B187877-FC84-4130-B74C-87ECE9E3EB5F}}  
−
                                Output format
 
−
          One of "u8", "s8", "u16", "s16", "u16_le", "s16_le", "u16_be",
 
−
          "s16_be", "fixed32", "float32" or "spdif"
 
−
      --audiofile-channels=<integer>
 
−
                                Number of output channels
 
−
          By default, all the channels of the incoming will be saved but you
 
−
          can restrict the number of channels here.
 
−
      --audiofile-file=<string>  Output file
 
−
          File to which the audio samples will be written to. ("-" for stdout
 
−
      --audiofile-wav, --no-audiofile-wav
 
−
                                Add WAVE header (default enabled)
 
−
          Instead of writing a raw file, you can add a WAV header to the file.
 
−
          (default enabled)
 
−
 
 
−
DirectX audio output
 
−
      --directx-audio-device-name={default}
 
 
                                 Output device
 
                                 Output device
 
           Select your audio output device
 
           Select your audio output device
−
       --directx-audio-float32, --no-directx-audio-float32
+
       --directx-audio-float32, --no-directx-audio-float32  
−
                                 Use float32 output (default disabled)
+
                                 Use float32 output
 +
                                (default enabled)
 
           The option allows you to enable or disable the high-quality float32
 
           The option allows you to enable or disable the high-quality float32
 
           audio output mode (which is not well supported by some soundcards).
 
           audio output mode (which is not well supported by some soundcards).
−
          (default disabled)
+
       --directx-audio-speaker={Windows default,Mono,Stereo,Quad,5.1,7.1}  
−
       --directx-audio-speaker={Windows default,Mono,Stereo,Quad,5.1,7.1}
 
 
                                 Speaker configuration
 
                                 Speaker configuration
 
           Select speaker configuration you want to use. This option doesn't
 
           Select speaker configuration you want to use. This option doesn't
 
           upmix! So NO e.g. Stereo -> 5.1 conversion.
 
           upmix! So NO e.g. Stereo -> 5.1 conversion.
 +
      --directx-volume=<float [0.000000 .. 2.000000]>
 +
                                Audio volume
 +
          Audio volume in hundredths of decibels (dB).
  
−
  Alpha mask video filter
+
  Audio memory output (amem)
−
Use an image's alpha channel as a transparency mask.
+
      --amem-format=<string>    Sample format
−
       --alphamask-mask=<string> Transparency mask
+
          Sample format
−
           Alpha blending transparency mask. Uses a png alpha channel.
+
       --amem-rate=<integer [1 .. 352800]>  
 +
                                Sample rate
 +
           Sample rate
 +
      --amem-channels=<integer [1 .. 9]>
 +
                                Channels count
 +
          Channels count
  
−
  Image properties filter
+
  File audio output (afile)
−
      --contrast=<float [0.000000 .. 2.000000]>
+
       --audiofile-file=<string> Output file
−
                                Image contrast (0-2)
+
           File to which the audio samples will be written to ("-" for stdout).
−
          Set the image contrast, between 0 and 2. Defaults to 1.
+
       --audiofile-format={u8,s16,float32,spdif}
−
       --brightness=<float [0.000000 .. 2.000000]>
+
                                 Output format
−
                                Image brightness (0-2)
+
           Output format
−
           Set the image brightness, between 0 and 2. Defaults to 1.
+
       --audiofile-channels=<integer [0 .. 6]>  
−
      --hue=<integer [0 .. 360]> Image hue (0-360)
+
                                 Number of output channels
−
          Set the image hue, between 0 and 360. Defaults to 0.
+
          By default (0), all the channels of the incoming will be saved but
−
       --saturation=<float [0.000000 .. 3.000000]>
+
           you can restrict the number of channels here.
−
                                 Image saturation (0-3)
+
       --audiofile-wav, --no-audiofile-wav
−
           Set the image saturation, between 0 and 3. Defaults to 1.
+
                                Add WAVE header
−
       --gamma=<float [0.010000 .. 10.000000]>
+
                                 (default enabled)
−
                                 Image gamma (0-10)
+
           Instead of writing a raw file, you can add a WAV header to the file.
−
           Set the image gamma, between 0.01 and 10. Defaults to 1.
 
−
       --brightness-threshold, --no-brightness-threshold
 
−
                                 Brightness threshold (default disabled)
 
−
           When this mode is enabled, pixels will be shown as black or white.
 
−
          The threshold value will be the brighness defined below. (default
 
−
          disabled)
 
  
−
  UDP input
+
  Simple stereo widening effect (stereo_widen)
−
       --udp-caching=<integer>   Caching value in ms
+
This filter enhances the stereo effect by suppressing mono (signal common to both channels) and by delaying the signal of left into right and vice versa, thereby widening the stereo effect.
−
           Caching value for UDP streams. This value should be set in
+
       --stereowiden-delay=<float [1.000000 .. 100.000000]>  
−
           milliseconds.
+
                                Delay time
 +
          Time in ms of the delay of left signal into right and vice versa.
 +
      --stereowiden-feedback=<float [0.000000 .. 0.900000]>
 +
                                Feedback gain
 +
          Amount of gain in delayed left signal into right and vice versa.
 +
           Gives a delay effect of left signal in right output and vice versa
 +
          which gives widening effect.
 +
      --stereowiden-crossfeed=<float [0.000000 .. 0.800000]>
 +
                                Crossfeed
 +
          Cross feed of left into right with inverted phase. This helps in
 +
          suppressing the mono. If the value is 1 it will cancel all the signal
 +
          common to both channels.
 +
      --stereowiden-dry-mix=<float [0.000000 .. 1.000000]>
 +
                                Dry mix
 +
           Level of input signal of original channel.
  
−
  TCP input
+
  Speex resampler (speex_resampler)
−
       --tcp-caching=<integer>   Caching value in ms
+
       --speex-resampler-quality=<integer [0 .. 10]>  
−
          Caching value for TCP streams. This value should be set in
+
                                Resampling quality
−
           milliseconds.
+
           Resampling quality, from worst to best
  
−
  SMB input
+
  Audio Spatializer (spatializer)
−
Samba (Windows network shares) input
+
       --spatializer-roomsize=<float [0.000000 .. 1.100000]>  
−
       --smb-caching=<integer>   Caching value in ms
+
                                Room size
−
          Caching value for SMB streams. This value should be set in
+
           Defines the virtual surface of the room emulated by the filter.
−
           milliseconds.
+
       --spatializer-width=<float [0.000000 .. 1.000000]>  
−
       --smb-user=<string>       SMB user name
+
                                Room width
−
           User name that will be used for the connection.
+
           Width of the virtual room
−
       --smb-pwd=<string>         SMB password
+
      --spatializer-wet=<float [0.000000 .. 1.000000]>
−
          Password that will be used for the connection.
+
                                Wet
−
       --smb-domain=<string>     SMB domain
+
       --spatializer-dry=<float [0.000000 .. 1.000000]>  
−
          Domain/Workgroup that will be used for the connection.
+
                                Dry
 +
       --spatializer-damp=<float [0.000000 .. 1.000000]>  
 +
                                Damp
  
−
  Real RTSP
+
  Ambisonics renderer and binauralizer (spatialaudio)
−
       --realrtsp-caching=<integer>
+
       --spatialaudio-headphones, --no-spatialaudio-headphones
−
                                 Caching value (ms)
+
                                Headphones mode (binaural)
−
           Caching value for RTSP streams. This value should be set in
+
                                 (default disabled)
−
           milliseconds.
+
           If the output is stereo, render ambisonics with the binaural decoder.
 +
      --hrtf-file=<string>      HRTF file for the binauralization
 +
           Custom HRTF (Head-related transfer function) file in the SOFA format.
  
−
  UDP stream output
+
  Audio tempo scaler synched with rate (scaletempo)
−
       --sout-udp-caching=<integer>
+
       --scaletempo-stride=<integer [1 .. 2000]>  
−
                                 Caching value (ms)
+
                                 Stride Length
−
          Default caching value for outbound UDP streams. This value should be
+
           Length in milliseconds to output each stride
−
           set in milliseconds.
+
       --scaletempo-overlap=<float [0.000000 .. 1.000000]>  
−
       --sout-udp-group=<integer> Group packets
+
                                Overlap Length
−
          Packets can be sent one by one at the right time or by groups. You
+
           Percentage of stride to overlap
−
           can choose the number of packets that will be sent at a time. It
+
      --scaletempo-search=<integer [0 .. 200]>
−
           helps reducing the scheduling load on heavily-loaded systems.
+
                                Search Length
 +
           Length in milliseconds to search for best overlap position
  
−
  IceCAST output
+
  Pitch Shifter (scaletempo_pitch)
−
       --sout-shout-name=<string> Stream name
+
       --scaletempo-stride=<integer [1 .. 2000]>  
−
           Name to give to this stream/channel on the shoutcast/icecast server.
+
                                Stride Length
−
       --sout-shout-description=<string>
+
           Length in milliseconds to output each stride
−
                                Stream description
+
       --scaletempo-overlap=<float [0.000000 .. 1.000000]>  
−
          Description of the stream content or information about your channel.
+
                                 Overlap Length
−
      --sout-shout-mp3, --no-sout-shout-mp3
+
           Percentage of stride to overlap
−
                                Stream MP3 (default disabled)
+
       --scaletempo-search=<integer [0 .. 200]>  
−
          You normally have to feed the shoutcast module with Ogg streams. It
+
                                 Search Length
−
          is also possible to stream MP3 instead, so you can forward MP3
+
           Length in milliseconds to search for best overlap position
−
          streams to the shoutcast/icecast server. (default disabled)
+
       --pitch-shift=<float [-12.000000 .. 12.000000]>  
−
      --sout-shout-genre=<string>
+
                                 Pitch Shift
−
                                 Genre description
+
           Pitch shift in semitones.
−
           Genre of the content.
 
−
       --sout-shout-url=<string>  URL description
 
−
          URL with information about the stream or your channel.  
 
−
      --sout-shout-bitrate=<string>
 
−
                                 Bitrate
 
−
           Bitrate information of the transcoded stream.
 
−
       --sout-shout-samplerate=<string>
 
−
                                Samplerate
 
−
          Samplerate information of the transcoded stream.  
 
−
      --sout-shout-channels=<string>
 
−
                                Number of channels
 
−
          Number of channels information of the transcoded stream.  
 
−
      --sout-shout-quality=<string>
 
−
                                 Ogg Vorbis Quality
 
−
           Ogg Vorbis Quality information of the transcoded stream.  
 
−
      --sout-shout-public, --no-sout-shout-public
 
−
                                Stream public (default disabled)
 
−
          Make the server publicly available on the 'Yellow Pages' (directory
 
−
          listing of streams) on the icecast/shoutcast website. Requires the
 
−
          bitrate information specified for shoutcast. Requires Ogg streaming
 
−
          for icecast. (default disabled)
 
  
−
  HTTP stream output
+
  Secret Rabbit Code (libsamplerate) resampler (samplerate)
−
       --sout-http-user=<string>  Username
+
       --src-converter-type={0 (Sinc function (best quality)), 1 (Sinc function (medium quality)), 2 (Sinc function (fast)), 3 (Zero Order Hold (fastest)), 4 (Linear (fastest))}
−
          User name that will be requested to access the stream.
+
                                Sample rate converter type
−
      --sout-http-pwd=<string>  Password
+
           Different resampling algorithms are supported. The best one is
−
          Password that will be requested to access the stream.
+
           slower, while the fast one exhibits low quality.
−
      --sout-http-mime=<string>  Mime
 
−
          MIME returned by the server (autodetected if not specified).
 
−
      --sout-http-cert=<string>  Certificate file
 
−
          Path to the x509 PEM certificate file that will be used for HTTPS.
 
−
      --sout-http-key=<string>  Private key file
 
−
           Path to the x509 PEM private key file that will be used for HTTPS.
 
−
          Leave empty if you don't have one.
 
−
      --sout-http-ca=<string>    Root CA file
 
−
          Path to the x509 PEM trusted root CA certificates (certificate
 
−
          authority) file that will be used for HTTPS. Leave empty if you don't
 
−
          have one.
 
−
      --sout-http-crl=<string>  CRL file
 
−
           Path to the x509 PEM Certificates Revocation List file that will be
 
−
          used for SSL. Leave empty if you don't have one.
 
  
−
  File stream output
+
  Audio channel remapper (remap)
−
       --sout-file-append, --no-sout-file-append
+
      --aout-remap-channel-left={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
−
                                 Append to file (default disabled)
+
                                Left
−
           Append to file if it exists instead of replacing it. (default
+
          Left
−
           disabled)
+
      --aout-remap-channel-center={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Center
 +
          Center
 +
      --aout-remap-channel-right={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Right
 +
          Right
 +
      --aout-remap-channel-rearleft={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Rear left
 +
          Rear left
 +
      --aout-remap-channel-rearcenter={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Rear center
 +
          Rear center
 +
      --aout-remap-channel-rearright={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Rear right
 +
          Rear right
 +
      --aout-remap-channel-middleleft={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Side left
 +
          Side left
 +
      --aout-remap-channel-middleright={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Side right
 +
          Side right
 +
      --aout-remap-channel-lfe={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)}
 +
                                Low-frequency effects
 +
          Low-frequency effects
 +
       --aout-remap-normalize, --no-aout-remap-normalize
 +
                                Normalize channels
 +
                                 (default enabled)
 +
           When mapping more than one channel to a single output channel,
 +
           normalize the output accordingly.
  
−
  Microsoft Media Server (MMS) input
+
  Parametric Equalizer (param_eq)
−
       --mms-caching=<integer>   Caching value in ms
+
       --param-eq-lowf=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
          Caching value for MMS streams. This value should be set in
+
                                Low freq (Hz)
−
          milliseconds.
+
      --param-eq-lowgain=<float [-20.000000 .. 20.000000]>
−
       --mms-timeout=<integer>   TCP/UDP timeout (ms)
+
                                Low freq gain (dB)
−
          Amount of time (in ms) to wait before aborting network reception of
+
      --param-eq-highf=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
          data. Note that there will be 10 retries before completely giving up.
+
                                High freq (Hz)
−
       --mms-all, --no-mms-all    Force selection of all streams (default
+
       --param-eq-highgain=<float [-20.000000 .. 20.000000]>
−
                                 disabled)
+
                                High freq gain (dB)
−
          MMS streams can contain several elementary streams, with different
+
      --param-eq-f1=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
          bitrates. You can choose to select all of them. (default disabled)
+
                                Freq 1 (Hz)
−
       --mms-maxbitrate=<integer> Maximum bitrate
+
      --param-eq-gain1=<float [-20.000000 .. 20.000000]>
−
           Select the stream with the maximum bitrate under that limit.
+
                                Freq 1 gain (dB)
−
       --mmsh-proxy=<string>     HTTP proxy
+
      --param-eq-q1=<float [0.100000 .. 100.000000]>
−
           HTTP proxy to be used It must be of the form http://[user[:pass]@]mypr
+
                                Freq 1 Q
−
           oxy.mydomain:myport/ ; if empty, the http_proxy environment variable
+
       --param-eq-f2=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
           will be tried.
+
                                Freq 2 (Hz)
 +
      --param-eq-gain2=<float [-20.000000 .. 20.000000]>
 +
                                Freq 2 gain (dB)
 +
      --param-eq-q2=<float [0.100000 .. 100.000000]>
 +
                                 Freq 2 Q
 +
      --param-eq-f3=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Freq 3 (Hz)
 +
      --param-eq-gain3=<float [-20.000000 .. 20.000000]>
 +
                                Freq 3 gain (dB)
 +
      --param-eq-q3=<float [0.100000 .. 100.000000]>
 +
                                Freq 3 Q
 +
 
 +
Volume normalizer (normvol)
 +
       --norm-buff-size=<integer> Number of audio buffers
 +
           This is the number of audio buffers on which the power measurement is
 +
          made. A higher number of buffers will increase the response time of
 +
          the filter to a spike but will make it less sensitive to short
 +
          variations.
 +
       --norm-max-level=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 +
                                Maximal volume level
 +
           If the average power over the last N buffers is higher than this
 +
           value, the volume will be normalized. This value is a positive
 +
           floating point number. A value between 0.5 and 10 seems sensible.
  
−
  Memory input
+
  Stereo to mono downmixer (mono)
−
       --imem-caching=<integer>  Caching value in ms
+
       --sout-mono-downmix, --no-sout-mono-downmix
−
          Caching value for imem streams. This value should be set in
+
                                Use downmix algorithm
−
          milliseconds.
+
                                (default enabled)
−
      --imem-get=<string>        Get function
+
           This option selects a stereo to mono downmix algorithm that is used
−
          Address of the get callback function
+
           in the headphone channel mixer. It gives the effect of standing in a
−
      --imem-release=<string>    Release function
+
           room full of speakers.
−
          Address of the release callback function
+
       --sout-mono-channel={0 (Left), 1 (Right), 4 (Rear left), 5 (Rear right), 7 (Center), 8 (Low-frequency effects), 2 (Side left), 3 (Side right), 6 (Rear center)}  
−
      --imem-cookie=<string>    Callback cookie string
+
                                 Select channel to keep
−
           Text identifier for the callback functions
+
           This option silences all other channels except the selected channel.
−
      --imem-data=<string>      Callback data
+
 
−
           Data for the get and release functions
+
Headphone virtual spatialization effect (headphone)
−
      --imem-id=<integer>        ID
+
This effect gives you the feeling that you are standing in a room with a complete 7.1 speaker set when using only a headphone, providing a more realistic sound experience. It should also be more comfortable and less tiring when listening to music for long periods of time.
−
          Set the ID of the elementary stream
+
It works with any source format from mono to 7.1.
−
      --imem-group=<integer>    Group
+
       --headphone-dim=<integer> Characteristic dimension
−
           Set the group of the elementary stream
+
           Distance between front left speaker and listener in meters.
−
       --imem-cat={0 (Unknown), 1 (Audio), 2 (Video), 3 (Subtitle), 4 (Data)}
+
       --headphone-compensate, --no-headphone-compensate
−
                                 Category
+
                                Compensate delay
−
           Set the category of the elementary stream
+
                                 (default disabled)
−
       --imem-codec=<string>     Codec
+
           The delay which is introduced by the physical algorithm may sometimes
−
           Set the codec of the elementary stream
+
          be disturbing for the synchronization between lips-movement and
−
       --imem-language=<string>  Language
+
           speech. In case, turn this on to compensate.
−
          Language of the elementary stream as described by ISO639
+
       --headphone-dolby, --no-headphone-dolby
−
      --imem-samplerate=<integer>
+
                                No decoding of Dolby Surround
−
                                 Sample rate
+
                                (default disabled)
−
           Sample rate of an audio elementary stream
+
           Dolby Surround encoded streams won't be decoded before being
−
      --imem-channels=<integer>  Channels count
+
           processed by this filter. Enabling this setting is not recommended.
−
           Channels count of an audio elementary stream
 
−
       --imem-width=<integer>    Width
 
−
          Width of video or subtitle elementary streams
 
−
      --imem-height=<integer>    Height
 
−
          Height of video or subtitle elementary streams
 
−
      --imem-dar=<string>        Display aspect ratio
 
−
          Display aspect ratio of a video elementary stream
 
−
      --imem-fps=<string>        Frame rate
 
−
           Frame rate of a video elementary stream
 
−
      --imem-size=<integer>      Size
 
−
           Size of stream in bytes
 
  
−
  HTTP input
+
  Gain control filter (gain)
−
       --http-proxy=<string>      HTTP proxy
+
       --gain-value=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
          HTTP proxy to be used It must be of the form http://[user@]myproxy.myd
+
                                 Gain multiplier
−
          omain:myport/ ; if empty, the http_proxy environment variable will be
+
           Increase or decrease the gain (default 1.0)
−
          tried.
 
−
      --http-proxy-pwd=<string>  HTTP proxy password
 
−
          If your HTTP proxy requires a password, set it here.
 
−
      --http-caching=<integer>  Caching value in ms
 
−
          Caching value for HTTP streams. This value should be set in
 
−
          milliseconds.
 
−
      --http-user-agent=<string> HTTP user agent
 
−
          User agent that will be used for the connection.
 
−
      --http-reconnect, --no-http-reconnect
 
−
                                Auto re-connect (default disabled)
 
−
          Automatically try to reconnect to the stream in case of a sudden
 
−
          disconnect. (default disabled)
 
−
      --http-continuous, --no-http-continuous
 
−
                                Continuous stream (default disabled)
 
−
          Read a file that is being constantly updated (for example, a JPG file
 
−
          on a server). You should not globally enable this option as it will
 
−
          break all other types of HTTP streams. (default disabled)
 
−
      --http-forward-cookies, --no-http-forward-cookies
 
−
                                Forward Cookies (default enabled)
 
−
          Forward Cookies across http redirections. (default enabled)
 
−
      --http-max-redirect=<integer>
 
−
                                 Max number of redirection
 
−
           Limit the number of redirection to follow.
 
−
      --http-use-IE-proxy, --no-http-use-IE-proxy
 
−
                                Use Internet Explorer entered HTTP proxy
 
−
                                server (default disabled)
 
−
          Use Internet Explorer entered HTTP proxy server for all URL. Don't
 
−
          take into account bypasses settings and auto configuration scripts.
 
−
          (default disabled)
 
  
−
  FTP input
+
  Equalizer with 10 bands (equalizer)
−
       --ftp-caching=<integer>   Caching value in ms
+
       --equalizer-preset={flat,classical,club,dance,fullbass,fullbasstreble,fulltreble,headphones,largehall,live,party,pop,reggae,rock,ska,soft,softrock,techno}
−
           Caching value for FTP streams. This value should be set in
+
                                Equalizer preset
−
           milliseconds.
+
          Preset to use for the equalizer.
−
       --ftp-user=<string>        FTP user name
+
      --equalizer-bands=<string> Bands gain
−
           User name that will be used for the connection.
+
          Don't use presets, but manually specified bands. You need to provide
−
       --ftp-pwd=<string>        FTP password
+
           10 values between -20dB and 20dB, separated by spaces, e.g. "0 2 4 2
−
           Password that will be used for the connection.
+
           0 -2 -4 -2 0 2".
−
       --ftp-account=<string>     FTP account
+
       --equalizer-2pass, --no-equalizer-2pass
−
           Account that will be used for the connection.
+
                                Two pass
 +
                                (default disabled)
 +
           Filter the audio twice. This provides a more intense effect.
 +
       --equalizer-vlcfreqs, --no-equalizer-vlcfreqs
 +
                                Use VLC frequency bands
 +
                                (default enabled)
 +
           Use the VLC frequency bands. Otherwise, use the ISO Standard
 +
          frequency bands.
 +
       --equalizer-preamp=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 +
                                Global gain
 +
           Set the global gain in dB (-20 ... 20).
  
−
  Fake video input
+
  Dynamic range compressor (compressor)
−
       --fake-caching=<integer>   Caching value in ms
+
       --compressor-rms-peak=<float [0.000000 .. 1.000000]>  
−
           Caching value for fake streams. This value should be set in
+
                                RMS/peak
−
           milliseconds.
+
           Set the RMS/peak.
−
       --fake-fps=<float>         Framerate
+
      --compressor-attack=<float [1.500000 .. 400.000000]>
−
           Number of frames per second (eg. 24, 25, 29.97, 30).
+
                                Attack time
−
       --fake-id=<integer>       ID
+
           Set the attack time in milliseconds.
−
           Set the ID of the fake elementary stream for use in #duplicate{}
+
       --compressor-release=<float [2.000000 .. 800.000000]>  
−
           constructs (default 0).
+
                                Release time
−
       --fake-duration=<integer> Duration in ms
+
           Set the release time in milliseconds.
−
           Duration of the fake streaming before faking an end-of-file (default
+
       --compressor-threshold=<float [-30.000000 .. 0.000000]>  
−
           is -1 meaning that the stream is unlimited when fake is forced, or
+
                                Threshold level
−
          lasts for 10 seconds otherwise. 0, means that the stream is
+
           Set the threshold level in dB.
−
          unlimited).
+
      --compressor-ratio=<float [1.000000 .. 20.000000]>
 +
                                Ratio
 +
           Set the ratio (n:1).
 +
       --compressor-knee=<float [1.000000 .. 10.000000]>  
 +
                                Knee radius
 +
           Set the knee radius in dB.
 +
      --compressor-makeup-gain=<float [0.000000 .. 24.000000]>
 +
                                Makeup gain
 +
           Set the makeup gain in dB (0 ... 24).
  
−
  Blu-Ray Disc Input
+
  Sound Delay (chorus_flanger)
−
       --bd-caching=<integer>     Caching value in ms
+
Add a delay effect to the sound
−
           Caching value for BDs. This value should be set in milliseconds.
+
      --delay-time=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Delay time
 +
          Time in milliseconds of the average delay. Note average
 +
       --sweep-depth=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
 +
                                Sweep Depth
 +
          Time in milliseconds of the maximum sweep depth. Thus, the sweep
 +
           range will be delay-time +/- sweep-depth.
 +
      --sweep-rate=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Sweep Rate
 +
          Rate of change of sweep depth in milliseconds shift per second of
 +
          play
 +
      --feedback-gain=<float [-0.900000 .. 0.900000]>
 +
                                Feedback gain
 +
          Gain on Feedback loop
 +
      --wet-mix=<float [-0.999000 .. 0.999000]>
 +
                                Wet mix
 +
          Level of delayed signal
 +
      --dry-mix=<float [-0.999000 .. 0.999000]>
 +
                                Dry Mix
 +
          Level of input signal
  
−
  ATSC A/52 (AC-3) audio decoder
+
  Audio part of the BarGraph function (audiobargraph_a)
−
       --a52-dynrng, --no-a52-dynrng
+
       --audiobargraph_a-bargraph=<integer>
−
                                 A/52 dynamic range compression (default
+
                                 Defines if BarGraph information should be sent
−
                                enabled)
+
           Defines if BarGraph information should be sent. 1 if the information
−
           Dynamic range compression makes the loud sounds softer, and the soft
+
           should be sent, 0 otherwise (default 1).
−
          sounds louder, so you can more easily listen to the stream in a noisy
+
       --audiobargraph_a-bargraph_repetition=<integer>  
−
          environment without disturbing anyone. If you disable the dynamic
+
                                 Sends the barGraph information every n audio
−
           range compression the playback will be more adapted to a movie
+
                                 packets
−
          theater or a listening room. (default enabled)
+
           Defines how often the barGraph information should be sent. Sends the
−
      --a52-upmix, --no-a52-upmix
+
           barGraph information every n audio packets (default 4).
−
                                Enable internal upmixing (default disabled)
+
       --audiobargraph_a-silence=<integer>
−
          Enable the internal upmixing algorithm (not recommended). (default
+
                                 Defines if silence alarm information should be
−
          disabled)
+
                                 sent
−
 
+
           Defines if silence alarm information should be sent. 1 if the
−
Audio
+
           information should be sent, 0 otherwise (default 1).
−
These options allow you to modify the behavior of the audio subsystem, and to add audio filters which can be used for post processing or visual effects (spectrum analyzer, etc.). Enable these filters here, and configure them in the "audio filters" modules section.
+
       --audiobargraph_a-time_window=<integer>
−
       --audio, --no-audio        Enable audio (default enabled)
+
                                 Time window to use in ms
−
          You can completely disable the audio output. The audio decoding stage
+
           Time Window during when the audio level is measured in ms for silence
−
          will not take place, thus saving some processing power. (default
+
           detection. If the audio level is under the threshold during this
−
          enabled)
+
           time, an alarm is sent (default 5000).
−
      --volume=<integer [0 .. 1024]>
+
       --audiobargraph_a-alarm_threshold=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
                                 Default audio volume
+
                                Minimum Audio level to raise the alarm
−
          You can set the default audio output volume here, in a range from 0
+
           Threshold to be attained to raise an alarm. If the audio level is
−
          to 1024.
+
           under the threshold during this time, an alarm is sent (default 0.1).
−
      --volume-step=<integer [0 .. 1024]>
+
       --audiobargraph_a-repetition_time=<integer>  
−
                                 Audio output volume step
+
                                 Time between two alarm messages in ms
−
           The step size of the volume is adjustable using this option, in a
+
           Time between two alarm messages in ms. This value is used to avoid
−
          range from 0 to 1024.
+
          alarm saturation (default 2000).
−
      --aout-rate=<integer>      Audio output frequency (Hz)
+
 
−
           You can force the audio output frequency here. Common values are -1
+
UDP stream output (udp)
−
          (default), 48000, 44100, 32000, 22050, 16000, 11025, 8000.
+
       --sout-udp-caching=<integer>
−
       --hq-resampling, --no-hq-resampling
+
                                 Caching value (ms)
−
                                 High quality audio resampling (default
+
           Default caching value for outbound UDP streams. This value should be
−
                                 enabled)
+
           set in milliseconds.
−
           This uses a high quality audio resampling algorithm. High quality
+
      --sout-udp-group=<integer> Group packets
−
           audio resampling can be processor intensive so you can disable it and
+
           Packets can be sent one by one at the right time or by groups. You
−
          a cheaper resampling algorithm will be used instead. (default enabled)
+
           can choose the number of packets that will be sent at a time. It
−
      --spdif, --no-spdif        Use S/PDIF when available (default disabled)
+
           helps reducing the scheduling load on heavily-loaded systems.
−
          S/PDIF can be used by default when your hardware supports it as well
 
−
          as the audio stream being played. (default disabled)
 
−
       --force-dolby-surround={0 (Auto), 1 (On), 2 (Off)}
 
−
                                 Force detection of Dolby Surround
 
−
           Use this when you know your stream is (or is not) encoded with Dolby
 
−
           Surround but fails to be detected as such. Even if the stream is not
 
−
          actually encoded with Dolby Surround, turning on this option might
 
−
           enhance your experience, especially when combined with the Headphone
 
−
          Channel Mixer.
 
−
       --audio-desync=<integer>   Audio desynchronization compensation
 
−
          This delays the audio output. The delay must be given in
 
−
           milliseconds. This can be handy if you notice a lag between the video
 
−
          and the audio.
 
−
      --audio-replay-gain-mode={none,track,album}
 
−
                                Replay gain mode
 
−
          Select the replay gain mode
 
−
      --audio-replay-gain-preamp=<float>
 
−
                                Replay preamp
 
−
           This allows you to change the default target level (89 dB) for stream
 
−
          with replay gain information
 
−
       --audio-replay-gain-default=<float>
 
−
                                 Default replay gain
 
−
           This is the gain used for stream without replay gain information
 
−
      --audio-replay-gain-peak-protection, --no-audio-replay-gain-peak-protection
 
−
                                Peak protection (default enabled)
 
−
          Protect against sound clipping (default enabled)
 
−
       --audio-time-stretch, --no-audio-time-stretch
 
−
                                 Enable time streching audio (default enabled)
 
−
           This allows to play audio at lower or higher speed without affecting
 
−
           the audio pitch (default enabled)
 
−
  -A, --aout=<string>           Audio output module
 
−
           This is the audio output method used by VLC. The default behavior is
 
−
           to automatically select the best method available.
 
−
      --audio-filter=<string>    Audio filters
 
−
           This adds audio post processing filters, to modify the sound
 
−
          rendering.
 
−
      --audio-visual=<string>    Audio visualizations
 
−
          This adds visualization modules (spectrum analyzer, etc.).
 
  
−
  Video
+
  IceCAST output (access_output_shout)
−
These options allow you to modify the behavior of the video output subsystem. You can for example enable video filters (deinterlacing, image adjusting, etc.). Enable these filters here and configure them in the "video filters" modules section. You can also set many miscellaneous video options.
+
       --sout-shout-name=<string> Stream name
−
       --video, --no-video        Enable video (default enabled)
+
           Name to give to this stream/channel on the shoutcast/icecast server.
−
           You can completely disable the video output. The video decoding stage
+
       --sout-shout-description=<string>
−
          will not take place, thus saving some processing power. (default
+
                                 Stream description
−
          enabled)
+
           Description of the stream content or information about your channel.
−
       --grayscale, --no-grayscale
+
      --sout-shout-mp3, --no-sout-shout-mp3
−
                                 Grayscale video output (default disabled)
+
                                Stream MP3
−
           Output video in grayscale. As the color information aren't decoded,
+
                                 (default disabled)
−
          this can save some processing power. (default disabled)
+
           You normally have to feed the shoutcast module with Ogg streams. It
−
  -f, --fullscreen, --no-fullscreen
+
          is also possible to stream MP3 instead, so you can forward MP3
−
                                 Fullscreen video output (default disabled)
+
           streams to the shoutcast/icecast server.
−
           Start video in fullscreen mode (default disabled)
+
       --sout-shout-genre=<string>  
−
      --embedded-video, --no-embedded-video
+
                                Genre description
−
                                Embedded video (default enabled)
+
           Genre of the content.
−
           Embed the video output in the main interface. (default enabled)
+
       --sout-shout-url=<string>  URL description
−
       --x11-display=<string>     X11 display
+
           URL with information about the stream or your channel.
−
           X11 hardware display to use. By default VLC will use the value of the
+
       --sout-shout-bitrate=<string>
−
          DISPLAY environment variable.
+
                                 Bitrate
−
       --xlib, --no-xlib           (default enabled)
+
           Bitrate information of the transcoded stream.
−
       --drop-late-frames, --no-drop-late-frames
+
       --sout-shout-samplerate=<string>
−
                                 Drop late frames (default enabled)
+
                                 Samplerate
−
           This drops frames that are late (arrive to the video output after
+
           Samplerate information of the transcoded stream.
−
          their intended display date). (default enabled)
+
       --sout-shout-channels=<string>
−
       --skip-frames, --no-skip-frames
+
                                 Number of channels
−
                                 Skip frames (default enabled)
+
           Number of channels information of the transcoded stream.
−
           Enables framedropping on MPEG2 stream. Framedropping occurs when your
+
       --sout-shout-quality=<string>
−
          computer is not powerful enough (default enabled)
+
                                 Ogg Vorbis Quality
−
       --quiet-synchro, --no-quiet-synchro
+
           Ogg Vorbis Quality information of the transcoded stream.
−
                                 Quiet synchro (default disabled)
+
       --sout-shout-public, --no-sout-shout-public
−
           This avoids flooding the message log with debug output from the video
+
                                Stream public
−
          output synchronization mechanism. (default disabled)
+
                                 (default disabled)
−
       --keyboard-events, --no-keyboard-events
+
           Make the server publicly available on the 'Yellow Pages' (directory
−
                                 Key press events (default enabled)
+
          listing of streams) on the icecast/shoutcast website. Requires the
−
           This enables VLC hotkeys from the (non-embedded) video window.
+
           bitrate information specified for shoutcast. Requires Ogg streaming
−
          (default enabled)
+
           for icecast.
−
       --mouse-events, --no-mouse-events
+
 
−
                                 Mouse events (default enabled)
+
HTTP Live streaming output (access_output_livehttp)
−
           This enables handling of mouse clicks on the video. (default enabled)
+
       --sout-livehttp-seglen=<integer>
−
      --overlay, --no-overlay    Overlay video output (default enabled)
+
                                 Segment length
−
          Overlay is the hardware acceleration capability of your video card
+
           Length of TS stream segments
−
           (ability to render video directly). VLC will try to use it by
+
       --sout-livehttp-numsegs=<integer>
−
           default. (default enabled)
+
                                 Number of segments
−
       --video-on-top, --no-video-on-top
+
           Number of segments to include in index
−
                                 Always on top (default disabled)
+
       --sout-livehttp-initial-segment-number=<integer>
−
           Always place the video window on top of other windows. (default
+
                                 Number of first segment
−
          disabled)
+
           The number of the first segment generated
−
       --video-wallpaper, --no-video-wallpaper
+
       --sout-livehttp-splitanywhere, --no-sout-livehttp-splitanywhere
−
                                 Enable wallpaper mode  (default disabled)
+
                                Split segments anywhere
−
           The wallpaper mode allows you to display the video as the desktop
+
                                 (default disabled)
−
          background. (default disabled)
+
           Don't require a keyframe before splitting a segment. Needed for audio
−
       --disable-screensaver, --no-disable-screensaver
+
           only.
−
                                 Disable screensaver (default enabled)
+
       --sout-livehttp-delsegs, --no-sout-livehttp-delsegs
−
           Disable the screensaver during video playback. (default enabled)
+
                                 Delete segments
−
       --video-title-show, --no-video-title-show
+
                                (default enabled)
−
                                 Show media title on video (default enabled)
+
          Delete segments when they are no longer needed
−
           Display the title of the video on top of the movie. (default enabled)
+
       --sout-livehttp-ratecontrol, --no-sout-livehttp-ratecontrol
−
      --video-title-timeout=<integer>
+
                                Use muxers rate control mechanism
−
                                Show video title for x milliseconds
+
                                 (default disabled)
−
           Show the video title for n milliseconds, default is 5000 ms (5 sec.)
+
           Use muxers rate control mechanism
−
       --video-title-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
       --sout-livehttp-caching, --no-sout-livehttp-caching
−
                                 Position of video title
+
                                Allow cache
−
          Place on video where to display the title (default bottom center).
+
                                 (default disabled)
−
       --mouse-hide-timeout=<integer>
+
           Add EXT-X-ALLOW-CACHE:NO directive in playlist-file if this is
−
                                Hide cursor and fullscreen controller after x
+
           disabled
−
                                milliseconds
+
       --sout-livehttp-generate-iv, --no-sout-livehttp-generate-iv
−
          Hide mouse cursor and fullscreen controller after n milliseconds,
+
                                 Use randomized IV for encryption
−
          default is 3000 ms (3 sec.)
 
−
  Snapshot:
 
−
      --snapshot-path=<string>  Video snapshot directory (or filename)
 
−
          Directory where the video snapshots will be stored.
 
−
      --snapshot-prefix=<string> Video snapshot file prefix
 
−
          Video snapshot file prefix
 
−
      --snapshot-format={png,jpg}
 
−
                                 Video snapshot format
 
−
           Image format which will be used to store the video snapshots
 
−
       --snapshot-preview, --no-snapshot-preview
 
−
                                 Display video snapshot preview (default
 
−
                                enabled)
 
−
           Display the snapshot preview in the screen's top-left corner.
 
−
           (default enabled)
 
−
       --snapshot-sequential, --no-snapshot-sequential
 
−
                                 Use sequential numbers instead of timestamps
 
 
                                 (default disabled)
 
                                 (default disabled)
−
           Use sequential numbers instead of timestamps for snapshot numbering
+
           Generate IV instead using segment-number as IV
−
           (default disabled)
+
      --sout-livehttp-index=<string>
−
       --snapshot-width=<integer> Video snapshot width
+
                                Index file
−
           You can enforce the width of the video snapshot. By default it will
+
           Path to the index file to create
−
           keep the original width (-1). Using 0 will scale the width to keep
+
       --sout-livehttp-index-url=<string>  
−
           the aspect ratio.
+
                                Full URL to put in index file
−
       --snapshot-height=<integer>
+
           Full URL to put in index file. Use #'s to represent segment number
−
                                 Video snapshot height
+
      --sout-livehttp-key-uri=<string>
−
           You can enforce the height of the video snapshot. By default it will
+
                                AES key URI to place in playlist
−
           keep the original height (-1). Using 0 will scale the height to keep
+
           AES key URI to place in playlist
−
           the aspect ratio.
+
      --sout-livehttp-key-file=<string>
−
  Window properties:
+
                                AES key file
−
       --width=<integer>         Video width
+
           File containing the 16 bytes encryption key
−
           You can enforce the video width. By default (-1) VLC will adapt to
+
       --sout-livehttp-key-loadfile=<string>  
−
          the video characteristics.
+
                                 File where vlc reads key-uri and
−
       --height=<integer>         Video height
+
                                keyfile-location
−
           You can enforce the video height. By default (-1) VLC will adapt to
+
           File is read when segment starts and is assumed to be in format:
−
           the video characteristics.
+
           key-uri\nkey-file. File is read on the segment opening and values are
−
       --video-x=<integer>        Video X coordinate
+
           used on that segment.
−
           You can enforce the position of the top left corner of the video
+
 
−
           window (X coordinate).
+
HTTP stream output (http)
−
       --video-y=<integer>       Video Y coordinate
+
       --sout-http-user=<string> Username
−
           You can enforce the position of the top left corner of the video
+
           Username that will be requested to access the stream.
−
           window (Y coordinate).
+
      --sout-http-pwd=<string>  Password
−
       --crop=<string>           Video cropping
+
          Password that will be requested to access the stream.
−
           This forces the cropping of the source video. Accepted formats are
+
       --sout-http-mime=<string> Mime
−
           x:y (4:3, 16:9, etc.) expressing the global image aspect.
+
           MIME returned by the server (autodetected if not specified).
−
       --custom-crop-ratios=<string>
+
      --sout-http-metacube, --no-sout-http-metacube
−
                                 Custom crop ratios list
+
                                Metacube
−
           Comma separated list of crop ratios which will be added in the
+
                                (default disabled)
−
           interface's crop ratios list.
+
          Use the Metacube protocol. Needed for streaming to the Cubemap
−
       --aspect-ratio=<string>    Source aspect ratio
+
          reflector.
−
           This forces the source aspect ratio. For instance, some DVDs claim to
+
 
−
           be 16:9 while they are actually 4:3. This can also be used as a hint
+
File stream output (file)
−
           for VLC when a movie does not have aspect ratio information. Accepted
+
      --sout-file-overwrite, --no-sout-file-overwrite
−
          formats are x:y (4:3, 16:9, etc.) expressing the global image aspect,
+
                                Overwrite existing file
−
           or a float value (1.25, 1.3333, etc.) expressing pixel squareness.
+
                                (default enabled)
−
       --autoscale, --no-autoscale
+
          If the file already exists, it will be overwritten.
−
                                 Video Auto Scaling (default enabled)
+
      --sout-file-append, --no-sout-file-append
−
           Let the video scale to fit a given window or fullscreen. (default
+
                                Append to file
−
          enabled)
+
                                (default disabled)
−
       --scale=<float>           Video scaling factor
+
          Append to file if it exists instead of replacing it.
−
           Scaling factor used when Auto Scaling is disabled.
+
      --sout-file-format, --no-sout-file-format
−
Default value is
+
                                Format time and date
−
          1.0 (original video size).
+
                                (default disabled)
−
       --monitor-par=<string>     Monitor pixel aspect ratio
+
           Perform ISO C time and date formatting on the file path
−
           This forces the monitor aspect ratio. Most monitors have square
+
 
−
           pixels (1:1). If you have a 16:9 screen, you might need to change
+
VNC client access (vnc)
−
           this to 4:3 in order to keep proportions.
+
       --rfb-user=<string>        Username
−
       --custom-aspect-ratios=<string>
+
          Username
−
                                Custom aspect ratios list
+
      --rfb-password=<string>    Password
−
           Comma separated list of aspect ratios which will be added in the
+
          Password
−
           interface's aspect ratio list.
+
      --rfb-x509-ca=<string>    X.509 Certificate Authority
−
       --hdtv-fix, --no-hdtv-fix  Fix HDTV height (default enabled)
+
           Certificate of the Authority to verify server's against
−
           This allows proper handling of HDTV-1080 video format even if broken
+
      --rfb-x509-crl=<string>    X.509 Certificate Revocation List
−
           encoder incorrectly sets height to 1088 lines. You should only
+
          List of revoked servers certificates
−
           disable this option if your video has a non-standard format requiring
+
      --rfb-x509-client-cert=<string>
−
           all 1088 lines. (default enabled)
+
                                X.509 Client certificate
−
       --video-deco, --no-video-deco
+
           Certificate for client authentication
−
                                 Window decorations (default enabled)
+
      --rfb-x509-client-key=<string>
−
           VLC can avoid creating window caption, frames, etc... around the
+
                                X.509 Client private key
−
          video, giving a "minimal" window. (default enabled)
+
          Private key for authentication by certificate
−
       --video-title=<string>     Video title
+
       --rfb-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>  
−
           Custom title for the video window (in case the video is not embedded
+
                                Frame rate
−
           in the interface).
+
           How many times the screen content should be refreshed per second.
−
       --align={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
+
      --rfb-chroma={RV32,RV24,RV16,RGB8}
−
                                 Video alignment
+
                                Frame buffer depth
−
          Enforce the alignment of the video in its window. By default (0) it
+
           RGB chroma (RV32, RV24, RV16, RGB2)
−
           will be centered (0=center, 1=left, 2=right, 4=top, 8=bottom, you can
+
       --rfb-compress-level=<integer [0 .. 9]>  
−
           also use combinations of these values, like 6=4+2 meaning top-right).
+
                                Compression level
−
       --zoom=<float>             Zoom video
+
           Transfer compression level from 0 (none) to 9 (max)
−
           You can zoom the video by the specified factor.
+
      --rfb-quality-level=<integer [1 .. 9]>
−
       --deinterlace={0 (Off), -1 (Automatic), 1 (On)}
+
                                Image quality
−
                                 Deinterlace
+
           Image quality 1 to 9 (max)
−
           Deinterlace
+
 
−
       --deinterlace-mode={discard,blend,mean,bob,linear,x,yadif,yadif2x}
+
VDR recordings (vdr)
−
                                Deinterlace mode
+
Support for VDR recordings (http://www.tvdr.de/).
−
           Deinterlace method to use for video processing.
+
       --vdr-chapter-offset=<integer>  
−
  -V, --vout=<string>           Video output module
+
                                 Chapter offset in ms
−
           This is the the video output method used by VLC. The default behavior
+
           Move all chapters. This value should be set in milliseconds.
−
           is to automatically select the best method available.
+
      --vdr-fps=<float [1.000000 .. 1000.000000]>
−
       --video-filter=<string>   Video filter module
+
                                Frame rate
−
           This adds post-processing filters to enhance the picture quality, for
+
           Default frame rate for chapter import.
−
           instance deinterlacing, or distort the video.
+
 
−
       --vout-filter=<string>    Video output filter module
+
UDP input (udp)
−
           This adds video output filters like clone or wall
+
       --udp-timeout=<integer>    UDP Source timeout (sec)
 +
 
 +
Time code subpicture elementary stream generator (timecode)
 +
      --timecode-fps={24/1,25/1,30000/1001,30/1}
 +
                                Frame rate
 +
           Frame rate
 +
 
 +
SMB input (smb)
 +
Samba (Windows network shares) input
 +
      --smb-user=<string>        Username
 +
          Username that will be used for the connection, if no username is set
 +
          in the URL.
 +
      --smb-pwd=<string>        Password
 +
          Password that will be used for the connection, if no username or
 +
           password are set in URL.
 +
      --smb-domain=<string>      SMB domain
 +
          Domain/Workgroup that will be used for the connection.
 +
 
 +
Shared memory framebuffer (shm)
 +
      --shm-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Frame rate
 +
           How many times the screen content should be refreshed per second.
 +
      --shm-depth={0 (XWD file (autodetect)), 8 (8 bits), 15 (15 bits), 16 (16 bits), 24 (24 bits), 32 (32 bits)}
 +
                                Frame buffer depth
 +
           Pixel depth of the frame buffer, or zero for XWD file
 +
      --shm-width=<integer [0 .. 65535]>
 +
                                Frame buffer width
 +
          Pixel width of the frame buffer (ignored for XWD file)
 +
       --shm-height=<integer [0 .. 65535]>
 +
                                 Frame buffer height
 +
           Pixel height of the frame buffer (ignored for XWD file)
 +
       --shm-file=<string>       Frame buffer file
 +
           Path of the memory mapped file of the frame buffer
 +
 
 +
SFTP input (sftp)
 +
       --sftp-port=<integer>     SFTP port
 +
           SFTP port number to use on the server
 +
      --sftp-user=<string>      Username
 +
           Username that will be used for the connection, if no username is set
 +
           in the URL.
 +
       --sftp-pwd=<string>       Password
 +
           Password that will be used for the connection, if no username or
 +
           password are set in URL.
 +
 
 +
Screen Input (screen)
 +
       --screen-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Frame rate
 +
          Desired frame rate for the capture.
 +
      --screen-top=<integer>    Region top row
 +
           Ordinate of the capture region in pixels.
 +
      --screen-left=<integer>    Region left column
 +
           Abscissa of the capture region in pixels.
 +
      --screen-width=<integer>  Capture region width
 +
           Capture region width
 +
      --screen-height=<integer>  Capture region height
 +
           Capture region height
 +
       --screen-follow-mouse, --no-screen-follow-mouse
 +
                                Follow the mouse
 +
                                 (default disabled)
 +
           Follow the mouse when capturing a subscreen.
 +
       --screen-mouse-image=<string>  
 +
                                Mouse pointer image
 +
           If specified, will use the image to draw the mouse pointer on the
 +
           capture.
 +
       --screen-fragment-size=<integer>
 +
                                Capture fragment size
 +
          Optimize the capture by fragmenting the screen in chunks of
 +
          predefined height (16 might be a good value, and 0 means disabled).
 +
 
 +
SAT>IP Receiver Plugin (satip)
 +
      --satip-buffer=<integer>  Receive buffer
 +
          UDP receive buffer size (bytes)
 +
      --satip-multicast, --no-satip-multicast
 +
                                Request multicast stream
 +
                                (default disabled)
 +
          Request server to send stream as multicast
 +
      --satip-host=<string>      Host
 +
          Host
 +
 
 +
Real-Time Protocol (RTP) input (rtp)
 +
      --rtcp-port=<integer [0 .. 65535]>
 +
                                 RTCP (local) port
 +
           RTCP packets will be received on this transport protocol port. If
 +
           zero, multiplexed RTP/RTCP is used.
 +
       --srtp-key=<string>       SRTP key (hexadecimal)
 +
          RTP packets will be authenticated and deciphered with this Secure RTP
 +
           master shared secret key. This must be a 32-character-long
 +
          hexadecimal string.
 +
       --srtp-salt=<string>      SRTP salt (hexadecimal)
 +
          Secure RTP requires a (non-secret) master salt value. This must be a
 +
          28-character-long hexadecimal string.
 +
      --rtp-max-src=<integer [1 .. 255]>
 +
                                 Maximum RTP sources
 +
           How many distinct active RTP sources are allowed at a time.
 +
       --rtp-timeout=<integer>    RTP source timeout (sec)
 +
           How long to wait for any packet before a source is expired.
 +
      --rtp-max-dropout=<integer [0 .. 32767]>  
 +
                                Maximum RTP sequence number dropout
 +
           RTP packets will be discarded if they are too much ahead (i.e. in the
 +
           future) by this many packets from the last received packet.
 +
       --rtp-max-misorder=<integer [0 .. 32767]>  
 +
                                Maximum RTP sequence number misordering
 +
           RTP packets will be discarded if they are too far behind (i.e. in the
 +
           past) by this many packets from the last received packet.
 +
       --rtp-dynamic-pt={theora}  RTP payload format assumed for dynamic
 +
                                payloads
 +
           This payload format will be assumed for dynamic payload types
 +
          (between 96 and 127) if it can't be determined otherwise with
 +
          out-of-band mappings (SDP)
 +
 
 +
NFS input (nfs)
 +
      --nfs-auto-guid, --no-nfs-auto-guid
 +
                                Set NFS uid/guid automatically
 +
                                (default enabled)
 +
          If uid/gid are not specified in the url, VLC will automatically set a
 +
          uid/gid.
  
−
  Subpictures
+
  RTP/RTSP/SDP demuxer (using Live555) (live555)
−
  These options allow you to modify the behavior of the subpictures subsystem. You can for example enable subpictures filters (logo, etc.). Enable these filters here and configure them in the "subpictures filters" modules section. You can also set many miscellaneous subpictures options.
+
      --rtsp-tcp, --no-rtsp-tcp Use RTP over RTSP (TCP)
−
  On Screen Display:
+
                                (default disabled)
−
       --spu, --no-spu            Enable sub-pictures (default enabled)
+
          Use RTP over RTSP (TCP)
−
           You can completely disable the sub-picture processing. (default
+
       --rtp-client-port=<integer>
−
          enabled)
+
                                Client port
−
       --osd, --no-osd            On Screen Display (default enabled)
+
          Port to use for the RTP source of the session
−
           VLC can display messages on the video. This is called OSD (On Screen
+
      --rtsp-mcast, --no-rtsp-mcast
−
          Display). (default enabled)
+
                                Force multicast RTP via RTSP
−
       --text-renderer=<string>   Text rendering module
+
                                (default disabled)
−
           VLC normally uses Freetype for rendering, but this allows you to use
+
           Force multicast RTP via RTSP
−
          svg for instance.
+
       --rtsp-http, --no-rtsp-http
−
  Subtitles:
+
                                Tunnel RTSP and RTP over HTTP
−
       --sub-file=<string>        Use subtitle file
+
                                (default disabled)
−
           Load this subtitle file. To be used when autodetect cannot detect
+
           Tunnel RTSP and RTP over HTTP
−
           your subtitle file.
+
       --rtsp-http-port=<integer> HTTP tunnel port
−
       --sub-autodetect-file, --no-sub-autodetect-file
+
           Port to use for tunneling the RTSP/RTP over HTTP.
−
                                 Autodetect subtitle files (default enabled)
+
       --rtsp-kasenna, --no-rtsp-kasenna
−
           Automatically detect a subtitle file, if no subtitle filename is
+
                                Kasenna RTSP dialect
−
          specified (based on the filename of the movie). (default enabled)
+
                                (default disabled)
−
      --sub-autodetect-fuzzy=<integer>
+
           Kasenna servers use an old and nonstandard dialect of RTSP. With this
−
                                Subtitle autodetection fuzziness
+
          parameter VLC will try this dialect, but then it cannot connect to
−
           This determines how fuzzy subtitle and movie filename matching will
+
           normal RTSP servers.
−
           be. Options are:
+
       --rtsp-wmserver, --no-rtsp-wmserver
−
0 = no subtitles autodetected
+
                                WMServer RTSP dialect
−
1 = any subtitle
+
                                 (default disabled)
−
           file
+
           WMServer uses a nonstandard dialect of RTSP. Selecting this parameter
−
2 = any subtitle file containing the movie name
+
          will tell VLC to assume some options contrary to RFC 2326 guidelines.
−
3 = subtitle
+
      --rtsp-user=<string>       Username
−
          file matching the movie name with additional chars
+
           Sets the username for the connection, if no username or password are
−
4 = subtitle file
+
           set in the url.
−
          matching the movie name exactly
+
      --rtsp-pwd=<string>        Password
−
       --sub-autodetect-path=<string>
+
          Sets the password for the connection, if no username or password are
−
                                 Subtitle autodetection paths
+
           set in the url.
−
           Look for a subtitle file in those paths too, if your subtitle file
+
       --rtsp-frame-buffer-size=<integer>  
−
           was not found in the current directory.
+
                                 RTSP frame buffer size
−
      --sub-margin=<integer>    Force subtitle position
+
           RTSP start frame buffer size of the video track, can be increased in
−
           You can use this option to place the subtitles under the movie,
+
           case of broken pictures due to too small buffer.
−
          instead of over the movie. Try several positions.
+
 
−
  Overlays:
+
Blu-ray Disc support (libbluray) (libbluray)
−
       --sub-filter=<string>      Subpictures filter module
+
      --bluray-menu, --no-bluray-menu
−
           This adds so-called "subpicture filters". These filters overlay some
+
                                Blu-ray menus
−
           images or text over the video (like a logo, arbitrary text, ...).
+
                                (default enabled)
−
  Track settings:
+
           Use Blu-ray menus. If disabled, the movie will start directly
−
       --program=<integer>        Program
+
       --bluray-region={A,B,C}    Region code
−
           Choose the program to select by giving its Service ID. Only use this
+
           Blu-Ray player region code. Some discs can be played only with a
−
          option if you want to read a multi-program stream (like DVB streams
+
           correct region code.
−
          for example).
+
 
−
       --programs=<string>        Programs
+
HTTP input (http)
−
          Choose the programs to select by giving a comma-separated list of
+
       --http-reconnect, --no-http-reconnect
−
          Service IDs (SIDs). Only use this option if you want to read a
+
                                Auto re-connect
−
          multi-program stream (like DVB streams for example).
+
                                (default disabled)
−
       --audio-track=<integer>    Audio track
+
           Automatically try to reconnect to the stream in case of a sudden
−
          Stream number of the audio track to use (from 0 to n).
+
          disconnect.
−
       --sub-track=<integer>     Subtitles track
+
 
−
           Stream number of the subtitle track to use (from 0 to n).
+
HTTPS input (access)
−
       --audio-language=<string> Audio language
+
       --http-continuous, --no-http-continuous
−
           Language of the audio track you want to use (comma separated, two or
+
                                Continuous stream
−
           three letter country code, you may use 'none' to avoid a fallback to
+
                                (default disabled)
−
           another language).
+
          Keep reading a resource that keeps being updated.
−
       --sub-language=<string>   Subtitle language
+
       --http-forward-cookies, --no-http-forward-cookies
−
           Language of the subtitle track you want to use (comma separated, two
+
                                Cookies forwarding
−
           or three letters country code, you may use 'any' as a fallback).
+
                                (default enabled)
−
       --audio-track-id=<integer> Audio track ID
+
          Forward cookies across HTTP redirections.
−
           Stream ID of the audio track to use.
+
       --http-referrer=<string>   Referrer
−
       --sub-track-id=<integer>   Subtitles track ID
+
           Provide the referral URL, i.e. HTTP "Referer" (sic).
−
           Stream ID of the subtitle track to use.
+
       --http-user-agent=<string> User agent
−
   Playback control:
+
           Override the name and version of the application as provided to the
−
       --input-repeat=<integer>  Input repetitions
+
           HTTP server, i.e. the HTTP "User-Agent". Name and version must be
−
          Number of time the same input will be repeated
+
           separated by a forward slash, e.g. "FooBar/1.2.3".
−
      --start-time=<float>      Start time
+
 
−
          The stream will start at this position (in seconds).
+
FTP input (ftp)
−
       --stop-time=<float>       Stop time
+
       --ftp-user=<string>       Username
−
           The stream will stop at this position (in seconds).
+
           Username that will be used for the connection, if no username is set
−
       --run-time=<float>         Run time
+
           in the URL.
−
           The stream will run this duration (in seconds).
+
       --ftp-pwd=<string>         Password
−
       --input-fast-seek, --no-input-fast-seek
+
           Password that will be used for the connection, if no username or
−
                                 Fast seek (default disabled)
+
          password are set in URL.
−
           Favor speed over precision while seeking (default disabled)
+
       --ftp-account=<string>     FTP account
−
      --rate=<float>            Playback speed
+
           Account that will be used for the connection.
−
           This defines the playback speed (nominal speed is 1.0).
+
 
−
       --input-list=<string>     Input list
+
File input (filesystem)
−
           You can give a comma-separated list of inputs that will be
+
   Directory:
−
           concatenated together after the normal one.
+
       --list-special-files, --no-list-special-files
−
       --input-slave=<string>     Input slave (experimental)
+
                                List special files
−
           This allows you to play from several inputs at the same time. This
+
                                (default disabled)
−
           feature is experimental, not all formats are supported. Use a '#'
+
          Include devices and pipes when listing directories
−
          separated list of inputs.
+
 
−
       --bookmarks=<string>       Bookmarks list for a stream
+
DVDRead Input (no menu support) (dvdread)
−
           You can manually give a list of bookmarks for a stream in the form
+
       --dvdread-angle=<integer> DVD angle
−
           "{name=bookmark-name,time=optional-time-offset,bytes=optional-byte-off
+
           Default DVD angle.
−
           set},{...}"
+
 
−
   Default devices:
+
DVDnav Input (dvdnav)
−
       --dvd=<string>            DVD device
+
       --dvdnav-angle=<integer>   DVD angle
−
          This is the default DVD drive (or file) to use. Don't forget the
+
           Default DVD angle.
−
          colon after the drive letter (eg. D:)
+
       --dvdnav-menu, --no-dvdnav-menu
−
      --vcd=<string>            VCD device
+
                                Start directly in menu
−
           This is the default VCD device to use.
+
                                 (default enabled)
 +
           Start the DVD directly in the main menu. This will try to skip all
 +
           the useless warning introductions.
 +
 
 +
Digital Television and Radio (dtv)
 +
       --dvb-adapter=<integer>   DVB adapter
 +
           If there is more than one digital broadcasting adapter, the adapter
 +
           number must be selected. Numbering starts from zero.
 +
       --dvb-network-name=<string>  
 +
                                Network name
 +
           Unique network name in the System Tuning Spaces
 +
      --dvb-create-name=<string> Network name to create
 +
           Create unique name in the System Tuning Spaces
 +
       --dvb-frequency=<integer [0 .. 107999999]>  
 +
                                Frequency (Hz)
 +
           TV channels are grouped by transponder (a.k.a. multiplex) on a given
 +
           frequency. This is required to tune the receiver.
 +
      --dvb-inversion={-1 (Automatic), 0 (Off), 1 (On)}
 +
                                Spectrum inversion
 +
           If the demodulator cannot detect spectral inversion correctly, it
 +
          needs to be configured manually.
 +
   Terrestrial reception parameters:
 +
       --dvb-bandwidth={0 (Automatic), 10 (10 MHz), 8 (8 MHz), 7 (7 MHz), 6 (6 MHz), 5 (5 MHz), 2 (1.712 MHz)}
 +
                                Bandwidth (MHz)
 +
          Bandwidth (MHz)
 +
      --dvb-transmission={-1 (Automatic), 1 (1k), 2 (2k), 4 (4k), 8 (8k), 16 (16k), 32 (32k)}
 +
                                Transmission mode
 +
           Transmission mode
 +
      --dvb-guard={,1/128,1/32,1/16,19/256,1/8,19/128,1/4}
 +
                                Guard interval
 +
          Guard interval
 +
  DVB-T reception parameters:
 +
      --dvb-code-rate-hp={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                High-priority code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
      --dvb-code-rate-lp={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                Low-priority code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
      --dvb-hierarchy={-1 (Automatic), 0 (None), 1 (1), 2 (2), 4 (4)}
 +
                                Hierarchy mode
 +
          Hierarchy mode
 +
      --dvb-plp-id=<integer [0 .. 255]>
 +
                                DVB-T2 Physical Layer Pipe
 +
          DVB-T2 Physical Layer Pipe
 +
  ISDB-T reception parameters:
 +
      --dvb-a-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK}
 +
                                Layer A modulation
 +
          The digital signal can be modulated according with different
 +
          constellations (depending on the delivery system). If the demodulator
 +
          cannot detect the constellation automatically, it needs to be
 +
          configured manually.
 +
      --dvb-a-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                Layer A code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
      --dvb-a-count=<integer [0 .. 13]>
 +
                                Layer A segments count
 +
      --dvb-a-interleaving=<integer [0 .. 3]>
 +
                                Layer A time interleaving
 +
      --dvb-b-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK}
 +
                                Layer B modulation
 +
          The digital signal can be modulated according with different
 +
          constellations (depending on the delivery system). If the demodulator
 +
          cannot detect the constellation automatically, it needs to be
 +
          configured manually.
 +
      --dvb-b-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                Layer B code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
      --dvb-b-count=<integer [0 .. 13]>
 +
                                Layer B segments count
 +
      --dvb-b-interleaving=<integer [0 .. 3]>
 +
                                Layer B time interleaving
 +
      --dvb-c-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK}
 +
                                Layer C modulation
 +
          The digital signal can be modulated according with different
 +
          constellations (depending on the delivery system). If the demodulator
 +
          cannot detect the constellation automatically, it needs to be
 +
          configured manually.
 +
      --dvb-c-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                Layer C code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
      --dvb-c-count=<integer [0 .. 13]>
 +
                                Layer C segments count
 +
      --dvb-c-interleaving=<integer [0 .. 3]>
 +
                                Layer C time interleaving
 +
  Cable and satellite reception parameters:
 +
      --dvb-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK}
 +
                                Modulation / Constellation
 +
          The digital signal can be modulated according with different
 +
          constellations (depending on the delivery system). If the demodulator
 +
          cannot detect the constellation automatically, it needs to be
 +
          configured manually.
 +
      --dvb-srate=<integer [0 .. 4294967295]>
 +
                                Symbol rate (bauds)
 +
          The symbol rate must be specified manually for some systems, notably
 +
          DVB-C, DVB-S and DVB-S2.
 +
      --dvb-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10}
 +
                                FEC code rate
 +
          The code rate for Forward Error Correction can be specified.
 +
  DVB-S2 parameters:
 +
      --dvb-stream=<integer [0 .. 255]>
 +
                                Stream identifier
 +
          Stream identifier
 +
      --dvb-pilot={-1 (Automatic), 0 (Off), 1 (On)}
 +
                                Pilot
 +
          Pilot
 +
      --dvb-rolloff={-1 (Automatic), 35 (0.35 (same as DVB-S)), 20 (0.20), 25 (0.25)}
 +
                                Roll-off factor
 +
          Roll-off factor
 +
  ISDB-S parameters:
 +
      --dvb-ts-id=<integer [0 .. 65535]>
 +
                                Transport stream ID
 +
          Transport stream ID
 +
  Satellite equipment control:
 +
      --dvb-polarization={,V,H,R,L}
 +
                                Polarization (Voltage)
 +
          To select the polarization of the transponder, a different voltage is
 +
          normally applied to the low noise block-downconverter (LNB).
 +
      --dvb-voltage=<integer [0 .. 18]>
 +
                               
 +
      --dvb-lnb-low=<integer [0 .. 2147483647]>
 +
                                Local oscillator low frequency (kHz)
 +
          The downconverter (LNB) will subtract the local oscillator frequency
 +
          from the satellite transmission frequency. The intermediate frequency
 +
          (IF) on the RF cable is the result.
 +
      --dvb-lnb-high=<integer [0 .. 2147483647]>
 +
                                Local oscillator high frequency (kHz)
 +
          The downconverter (LNB) will subtract the local oscillator frequency
 +
          from the satellite transmission frequency. The intermediate frequency
 +
          (IF) on the RF cable is the result.
 +
      --dvb-lnb-switch=<integer [0 .. 2147483647]>
 +
                                Universal LNB switch frequency (kHz)
 +
          If the satellite transmission frequency exceeds the switch frequency,
 +
          the oscillator high frequency will be used as reference. Furthermore
 +
          the automatic continuous 22kHz tone will be sent.
 +
      --dvb-network-id=<integer> Network identifier
 +
          Network identifier
 +
      --dvb-azimuth=<integer>    Satellite azimuth
 +
          Satellite azimuth in tenths of degree
 +
      --dvb-elevation=<integer>  Satellite elevation
 +
          Satellite elevation in tenths of degree
 +
      --dvb-longitude=<integer>  Satellite longitude
 +
          Satellite longitude in tenths of degree. West is negative.
 +
      --dvb-range=<string>      Satellite range code
 +
          Satellite range code as defined by manufacturer e.g. DISEqC switch
 +
          code
 +
  ATSC reception parameters:
 +
      --dvb-major-channel=<integer>
 +
                                Major channel
 +
      --dvb-minor-channel=<integer>
 +
                                ATSC minor channel
 +
      --dvb-physical-channel=<integer>
 +
                                Physical channel
 +
 
 +
DirectShow input (dshow)
 +
      --dshow-vdev={,none,screen-capture-recorder}
 +
                                Video device name
 +
          Name of the video device that will be used by the DirectShow plugin.
 +
          If you don't specify anything, the default device will be used.
 +
      --dshow-adev={,none,Aux (ASUS Xonar DG Audio Device),CABLE Output (VB-Audio Virtual Cable),Line In (ASUS Xonar DG Audio Device),Microphone (ASUS Xonar DG Audio Device),Stereo Mix (ASUS Xonar DG Audio Device),Wave (ASUS Xonar DG Audio Device),virtual-audio-capturer}
 +
                                Audio device name
 +
          Name of the audio device that will be used by the DirectShow plugin.
 +
          If you don't specify anything, the default device will be used.
 +
      --dshow-size=<string>      Video size
 +
          Size of the video that will be displayed by the DirectShow plugin. If
 +
          you don't specify anything the default size for your device will be
 +
          used. You can specify a standard size (cif, d1, ...) or
 +
          <width>x<height>.
 +
      --dshow-aspect-ratio=<string>
 +
                                Picture aspect-ratio n:m
 +
          Define input picture aspect-ratio to use. Default is 4:3
 +
      --dshow-chroma=<string>    Video input chroma format
 +
          Force the DirectShow video input to use a specific chroma format (eg.
 +
          I420 (default), RV24, etc.)
 +
      --dshow-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
 +
                                Video input frame rate
 +
          Force the DirectShow video input to use a specific frame rate (eg. 0
 +
          means default, 25, 29.97, 50, 59.94, etc.)
 +
      --dshow-config, --no-dshow-config
 +
                                Device properties
 +
                                (default disabled)
 +
          Show the properties dialog of the selected device before starting the
 +
          stream.
 +
      --dshow-tuner, --no-dshow-tuner
 +
                                Tuner properties
 +
                                (default disabled)
 +
          Show the tuner properties [channel selection] page.
 +
      --dshow-tuner-channel=<integer>
 +
                                Tuner TV Channel
 +
          Set the TV channel the tuner will set to (0 means default).
 +
      --dshow-tuner-frequency=<integer>
 +
                                Tuner Frequency
 +
          This overrides the channel. Measured in Hz.
 +
      --dshow-tuner-country=<integer>
 +
                                Tuner country code
 +
          Set the tuner country code that establishes the current
 +
          channel-to-frequency mapping (0 means default).
 +
      --dshow-tuner-standard={0 (Default), 1 (NTSC_M), 2 (NTSC_M_J), 4 (NTSC_443), 16 (PAL_B), 32 (PAL_D), 64 (PAL_G), 128 (PAL_H), 256 (PAL_I), 512 (PAL_M), 1024 (PAL_N), 2048 (PAL_60), 4096 (SECAM_B), 8192 (SECAM_D), 16384 (SECAM_G), 32768 (SECAM_H), 65536 (SECAM_K), 131072 (SECAM_K1), 262144 (SECAM_L), 524288 (SECAM_L1), 1048576 (PAL_N_COMBO)}
 +
                                Video standard
 +
          Video standard
 +
      --dshow-tuner-input={0 (Default), 1 (Cable), 2 (Antenna)}
 +
                                Tuner input type
 +
          Select the tuner input type (Cable/Antenna).
 +
      --dshow-video-input=<integer>
 +
                                Video input pin
 +
          Select the video input source, such as composite, s-video, or tuner.
 +
          Since these settings are hardware-specific, you should find good
 +
          settings in the "Device config" area, and use those numbers here. -1
 +
          means that settings will not be changed.
 +
      --dshow-video-output=<integer>
 +
                                Video output pin
 +
          Select the video output type. See the "video input" option.
 +
      --dshow-audio-input=<integer>
 +
                                Audio input pin
 +
          Select the audio input source. See the "video input" option.
 +
      --dshow-audio-output=<integer>
 +
                                Audio output pin
 +
          Select the audio output type. See the "video input" option.
 +
      --dshow-amtuner-mode={0 (Default), 1 (TV), 2 (FM radio), 4 (AM radio), 8 (DSS)}
 +
                                AM Tuner mode
 +
          AM Tuner mode. Can be one of Default (0), TV (1), AM Radio (2), FM
 +
          Radio (3) or DSS (4).
 +
      --dshow-audio-channels=<integer>
 +
                                Number of audio channels
 +
          Select audio input format with the given number of audio channels (if
 +
          non 0)
 +
      --dshow-audio-samplerate=<integer>
 +
                                Audio sample rate
 +
          Select audio input format with the given sample rate (if non 0)
 +
      --dshow-audio-bitspersample=<integer>
 +
                                Audio bits per sample
 +
          Select audio input format with the given bits/sample (if non 0)
 +
 
 +
Digital Cinema Package module (dcp)
 +
      --kdm=<string>            KDM file
 +
          Path to Key Delivery Message XML file
 +
 
 +
Audio CD input (cdda)
 
       --cd-audio=<string>        Audio CD device
 
       --cd-audio=<string>        Audio CD device
−
           This is the default Audio CD device to use.
+
           This is the default Audio CD drive (or file) to use. Don't forget the
−
  Network settings:
+
          colon after the drive letter (e.g. D:)
−
       --server-port=<integer>   UDP port
+
 
−
          This is the default port used for UDP streams. Default is 1234.
+
[cdda:][device][@[track]]
−
       --mtu=<integer>           MTU of the network interface
+
       --cdda-track=<integer>   
−
          This is the maximum application-layer packet size that can be
+
      --cdda-first-sector=<integer>  
−
           transmitted over the network (in bytes).
+
                               
−
  -6, --ipv6, --no-ipv6          Force IPv6 (default disabled)
+
       --cdda-last-sector=<integer>  
−
           IPv6 will be used by default for all connections. (default disabled)
+
                               
−
  -4, --ipv4, --no-ipv4          Force IPv4 (default disabled)
+
      --cddb-server=<string>    CDDB Server
−
           IPv4 will be used by default for all connections. (default disabled)
+
           Address of the CDDB server to use.
−
       --ipv4-timeout=<integer>   TCP connection timeout
+
      --cddb-port=<integer [1 .. 65535]>
−
           Default TCP connection timeout (in milliseconds).
+
                                CDDB port
−
  Socks proxy:
+
           CDDB Server port to use.
−
      --socks=<string>          SOCKS server
+
 
−
          SOCKS proxy server to use. This must be of the form address:port. It
+
Windows Audio Session API input (wasapi)
−
           will be used for all TCP connections
+
      --wasapi-loopback, --no-wasapi-loopback
−
       --socks-user=<string>      SOCKS user name
+
                                Loopback mode
−
          User name to be used for connection to the SOCKS proxy.
+
                                (default disabled)
−
      --socks-pwd=<string>      SOCKS password
+
           Record an audio rendering endpoint.
−
           Password to be used for connection to the SOCKS proxy.
+
 
−
  Metadata:
+
Microsoft Media Server (MMS) input (access_mms)
−
      --meta-title=<string>      Title metadata
+
       --mms-timeout=<integer>   TCP/UDP timeout (ms)
−
           Allows you to specify a "title" metadata for an input.
+
           Amount of time (in ms) to wait before aborting network reception of
−
       --meta-author=<string>     Author metadata
+
           data. Note that there will be 10 retries before completely giving up.
−
           Allows you to specify an "author" metadata for an input.
+
       --mms-all, --no-mms-all    Force selection of all streams
−
      --meta-artist=<string>    Artist metadata
+
                                (default disabled)
−
          Allows you to specify an "artist" metadata for an input.
+
           MMS streams can contain several elementary streams, with different
−
       --meta-genre=<string>     Genre metadata
+
           bitrates. You can choose to select all of them.
−
           Allows you to specify a "genre" metadata for an input.
+
       --mms-maxbitrate=<integer> Maximum bitrate
−
       --meta-copyright=<string> Copyright metadata
+
           Select the stream with the maximum bitrate under that limit.
−
           Allows you to specify a "copyright" metadata for an input.
+
 
−
       --meta-description=<string>
+
Memory input (imem)
−
                                Description metadata
+
       --imem-get=<string>       Get function
−
           Allows you to specify a "description" metadata for an input.
+
           Address of the get callback function
−
       --meta-date=<string>      Date metadata
+
       --imem-release=<string>   Release function
−
           Allows you to specify a "date" metadata for an input.
+
           Address of the release callback function
−
       --meta-url=<string>        URL metadata
+
       --imem-cookie=<string>     Callback cookie string
−
           Allows you to specify a "url" metadata for an input.
+
           Text identifier for the callback functions
−
  Advanced:
+
       --imem-data=<string>      Callback data
−
       --cr-average=<integer>    Clock reference average counter
+
           Data for the get and release functions
−
           When using the PVR input (or a very irregular source), you should set
+
       --imem-id=<integer>        ID
−
          this to 10000.
+
           Set the ID of the elementary stream
−
       --clock-synchro={-1 (Default), 0 (Disable), 1 (Enable)}
+
       --imem-group=<integer>    Group
−
                                 Clock synchronisation
+
           Set the group of the elementary stream
−
           It is possible to disable the input clock synchronisation for
+
       --imem-cat={0 (Unknown), 1 (Audio), 2 (Video), 3 (Subtitle), 4 (Data)}  
−
          real-time sources. Use this if you experience jerky playback of
+
                                 Category
−
           network streams.
+
           Set the category of the elementary stream
−
       --clock-jitter=<integer>  Clock jitter
+
      --imem-codec=<string>      Codec
−
           It tells the clock algorithms what is the maximal input jitter that
+
           Set the codec of the elementary stream
−
          is considered valid and can be compensated (in milliseconds)
+
       --imem-language=<string>  Language
−
       --network-synchronisation, --no-network-synchronisation
+
           Language of the elementary stream as described by ISO639
−
                                 Network synchronisation (default disabled)
+
       --imem-samplerate=<integer>
−
           This allows you to remotely synchronise clocks for server and client.
+
                                 Sample rate
−
          The detailed settings are available in Advanced / Network Sync.
+
           Sample rate of an audio elementary stream
−
           (default disabled)
+
      --imem-channels=<integer>  Channels count
−
       --input-record-path=<string>
+
           Channels count of an audio elementary stream
−
                                Record directory or filename
+
       --imem-width=<integer>     Width
−
           Directory or filename where the records will be stored
+
           Width of video or subtitle elementary streams
−
       --input-record-native, --no-input-record-native
+
       --imem-height=<integer>    Height
−
                                Prefer native stream recording (default
+
          Height of video or subtitle elementary streams
−
                                enabled)
+
      --imem-dar=<string>        Display aspect ratio
−
           When possible, the input stream will be recorded instead of using the
+
           Display aspect ratio of a video elementary stream
−
          stream output module (default enabled)
+
       --imem-fps=<string>       Frame rate
−
       --input-timeshift-path=<string>
+
           Frame rate of a video elementary stream
−
                                Timeshift directory
+
       --imem-size=<integer>     Size
−
           Directory used to store the timeshift temporary files.
+
           Size of stream in bytes
−
       --input-timeshift-granularity=<integer>
+
 
−
                                Timeshift granularity
+
Concatenated inputs (concat)
−
           This is the maximum size in bytes of the temporary files that will be
+
      --concat-list=<string>    Inputs list
−
           used to store the timeshifted streams.
+
           Comma-separated list of input URLs to concatenate.
  
−
  Decoders
+
  core program (core)
−
This option can be used to alter the way VLC selects its codecs (decompression methods). Only advanced users should alter this option as it can break playback of all your streams.
 
−
      --codec=<string>          Preferred decoders list
 
−
          List of codecs that VLC will use in priority. For instance,
 
−
          'dummy,a52' will try the dummy and a52 codecs before trying the other
 
−
          ones. Only advanced users should alter this option as it can break
 
−
          playback of all your streams.
 
−
      --encoder=<string>        Preferred encoders list
 
−
          This allows you to select a list of encoders that VLC will use in
 
−
          priority.
 
  
−
Input
+
Audio
−
These options allow you to modify the behavior of the input subsystem, such as the DVD or VCD device, the network interface settings or the subtitle channel.
+
These options allow you to modify the behavior of the audio subsystem, and to add audio filters which can be used for post processing or visual effects (spectrum analyzer, etc.). Enable these filters here, and configure them in the "audio filters" modules section.
−
      --access=<string>          Access module
+
      --audio, --no-audio        Enable audio
−
          This allows you to force an access module. You can use it if the
+
                                (default enabled)
−
          correct access is not automatically detected. You should not set this
+
          You can completely disable the audio output. The audio decoding stage
−
          as a global option unless you really know what you are doing.
+
          will not take place, thus saving some processing power.
−
      --demux=<string>          Demux module
+
      --gain=<float [0.000000 .. 8.000000]>
−
          Demultiplexers are used to separate the "elementary" streams (like
+
                                Audio gain
−
          audio and video streams). You can use it if the correct demuxer is
+
          This linear gain will be applied to outputted audio.
−
          not automatically detected. You should not set this as a global
+
      --volume-step=<float [1.000000 .. 256.000000]>
−
          option unless you really know what you are doing.
+
                                Audio output volume step
−
      --prefer-system-codecs, --no-prefer-system-codecs
+
          The step size of the volume is adjustable using this option.
−
                                Prefer system plugins over VLC (default
+
      --volume-save, --no-volume-save
−
                                disabled)
+
                                Remember the audio volume
−
          Indicates whether VLC will prefer native plugins installed on system
+
                                (default enabled)
−
          over VLC owns plugins whenever a choice is available. (default
+
          Remember the audio volume
−
          disabled)
+
      --spdif, --no-spdif        Force S/PDIF support
−
      --stream-filter=<string>  Stream filter module
+
                                (default disabled)
−
          Stream filters are used to modify the stream that is being read.
+
          This option should be used when the audio output can't negotiate
−
 
+
          S/PDIF support.
−
Stream output
+
      --force-dolby-surround={0 (Auto), 1 (On), 2 (Off)}
−
These options allow you to set default global options for the stream output subsystem.
+
                                Force detection of Dolby Surround
−
      --sout=<string>            Default stream output chain
+
          Use this when you know your stream is (or is not) encoded with Dolby
−
          You can enter here a default stream output chain. Refer to the
+
          Surround but fails to be detected as such. Even if the stream is not
−
          documentation to learn how to build such chains. Warning: this chain
+
          actually encoded with Dolby Surround, turning on this option might
−
          will be enabled for all streams.
+
          enhance your experience, especially when combined with the Headphone
−
      --sout-display, --no-sout-display
+
          Channel Mixer.
−
                                Display while streaming (default disabled)
+
      --stereo-mode={0 (Unset), 1 (Stereo), 2 (Reverse stereo), 3 (Left), 4 (Right), 5 (Dolby Surround), 6 (Headphones)}
−
          Play locally the stream while streaming it. (default disabled)
+
                                Stereo audio output mode
−
      --sout-keep, --no-sout-keep
+
          Stereo audio output mode
−
                                Keep stream output open (default disabled)
+
      --audio-desync=<integer>  Audio desynchronization compensation
−
          This allows you to keep an unique stream output instance across
+
          This delays the audio output. The delay must be given in
−
          multiple playlist item (automatically insert the gather stream output
+
          milliseconds. This can be handy if you notice a lag between the video
−
          if not specified) (default disabled)
+
          and the audio.
−
      --sout-all, --no-sout-all  Enable streaming of all ES (default disabled)
+
      --audio-replay-gain-mode={none,track,album}
−
          Stream all elementary streams (video, audio and subtitles) (default
+
                                Replay gain mode
−
          disabled)
+
          Select the replay gain mode
−
      --sout-audio, --no-sout-audio
+
      --audio-replay-gain-preamp=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
                                Enable audio stream output (default enabled)
+
                                Replay preamp
−
          Choose whether the audio stream should be redirected to the stream
+
          This allows you to change the default target level (89 dB) for stream
−
          output facility when this last one is enabled. (default enabled)
+
          with replay gain information
−
      --sout-video, --no-sout-video
+
      --audio-replay-gain-default=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]>
−
                                Enable video stream output (default enabled)
+
                                Default replay gain
−
          Choose whether the video stream should be redirected to the stream
+
          This is the gain used for stream without replay gain information
−
          output facility when this last one is enabled. (default enabled)
+
      --audio-replay-gain-peak-protection, --no-audio-replay-gain-peak-protection
−
      --sout-spu, --no-sout-spu  Enable SPU stream output (default enabled)
+
                                Peak protection
−
          Choose whether the SPU streams should be redirected to the stream
+
                                (default enabled)
−
          output facility when this last one is enabled. (default enabled)
+
          Protect against sound clipping
−
      --sout-mux-caching=<integer>
+
      --audio-time-stretch, --no-audio-time-stretch
−
                                Stream output muxer caching (ms)
+
                                Enable time stretching audio
−
          This allow you to configure the initial caching amount for stream
+
                                (default enabled)
−
          output  muxer. This value should be set in milliseconds.
+
          This allows playing audio at lower or higher speed without affecting
−
  VLM:
+
          the audio pitch
−
      --vlm-conf=<string>        VLM configuration file
+
  -A, --aout={any,mmdevice,directsound,waveout,amem,afile,adummy,none}
−
          Read a VLM configuration file as soon as VLM is started.
+
                                Audio output module
−
      --mux=<string>            Mux module
+
          This is the audio output method used by VLC. The default behavior is
−
          This is a legacy entry to let you configure mux modules
+
          to automatically select the best method available.
−
      --access_output=<string>  Access output module
+
      --role={video,music,communication,game,notification,animation,production,accessibility,test}
−
          This is a legacy entry to let you configure access output modules
+
                                Media role
−
      --ttl=<integer>            Hop limit (TTL)
+
          Media (player) role for operating system policy.
−
          This is the hop limit (also known as "Time-To-Live" or TTL) of the
+
      --audio-filter=<string>    Audio filters
−
          multicast packets sent by the stream output (-1 = use operating
+
          This adds audio post processing filters, to modify the sound
−
 
+
          rendering.
 +
      --audio-visual={any,goom,projectm,visual,glspectrum,none}
 +
                                Audio visualizations
 +
          This adds visualization modules (spectrum analyzer, etc.).
 +
      --audio-resampler={any,samplerate,ugly,speex_resampler,none}
 +
                                Audio resampler
 +
          This selects which plugin to use for audio resampling.
 +
 
 +
Video
 +
These options allow you to modify the behavior of the video output subsystem. You can for example enable video filters (deinterlacing, image adjusting, etc.). Enable these filters here and configure them in the "video filters" modules section. You can also set many miscellaneous video options.
 +
      --video, --no-video        Enable video
 +
                                (default enabled)
 +
          You can completely disable the video output. The video decoding stage
 +
          will not take place, thus saving some processing power.
 +
      --grayscale, --no-grayscale
 +
                                Grayscale video output
 +
                                (default disabled)
 +
          Output video in grayscale. As the color information aren't decoded,
 +
          this can save some processing power.
 +
  -f, --fullscreen, --no-fullscreen
 +
                                Fullscreen video output
 +
                                (default disabled)
 +
          Start video in fullscreen mode
 +
      --embedded-video, --no-embedded-video
 +
                                Embedded video
 +
                                (default enabled)
 +
          Embed the video output in the main interface.
 +
      --xlib, --no-xlib         
 +
                                (default enabled)
 +
      --drop-late-frames, --no-drop-late-frames
 +
                                Drop late frames
 +
                                (default enabled)
 +
          This drops frames that are late (arrive to the video output after
 +
          their intended display date).
 +
      --skip-frames, --no-skip-frames
 +
                                Skip frames
 +
                                (default enabled)
 +
          Enables framedropping on MPEG2 stream. Framedropping occurs when your
 +
          computer is not powerful enough
 +
      --quiet-synchro, --no-quiet-synchro
 +
                                Quiet synchro
 +
                                (default disabled)
 +
          This avoids flooding the message log with debug output from the video
 +
          output synchronization mechanism.
 +
      --keyboard-events, --no-keyboard-events
 +
                                Key press events
 +
                                (default enabled)
 +
          This enables VLC hotkeys from the (non-
 
           Select the key to play this bookmark.
 
           Select the key to play this bookmark.
−
       --key-play-bookmark10=<integer>
+
       --key-play-bookmark1=<string>
−
                                 Play playlist bookmark 10
+
                                Play playlist bookmark 1
−
           Select the key to play this bookmark.
+
          Select the key to play this bookmark.
−
       --global-key-play-bookmark10=<integer>
+
      --global-key-play-bookmark2=<string>
−
                                 Play playlist bookmark 10
+
                                Play playlist bookmark 2
−
           Select the key to play this bookmark.
+
          Select the key to play this bookmark.
−
       --bookmark1=<string>      Playlist bookmark 1
+
      --key-play-bookmark2=<string>
−
           This allows you to define playlist bookmarks.
+
                                Play playlist bookmark 2
−
       --bookmark2=<string>      Playlist bookmark 2
+
          Select the key to play this bookmark.
−
           This allows you to define playlist bookmarks.
+
      --global-key-play-bookmark3=<string>
−
       --bookmark3=<string>      Playlist bookmark 3
+
                                Play playlist bookmark 3
−
           This allows you to define playlist bookmarks.
+
          Select the key to play this bookmark.
−
       --bookmark4=<string>      Playlist bookmark 4
+
      --key-play-bookmark3=<string>
−
           This allows you to define playlist bookmarks.
+
                                Play playlist bookmark 3
−
       --bookmark5=<string>      Playlist bookmark 5
+
          Select the key to play this bookmark.
−
           This allows you to define playlist bookmarks.
+
      --global-key-play-bookmark4=<string>
−
       --bookmark6=<string>      Playlist bookmark 6
+
                                Play playlist bookmark 4
−
           This allows you to define playlist bookmarks.
+
          Select the key to play this bookmark.
−
       --bookmark7=<string>      Playlist bookmark 7
+
      --key-play-bookmark4=<string>
−
           This allows you to define playlist bookmarks.
+
                                Play playlist bookmark 4
−
       --bookmark8=<string>      Playlist bookmark 8
+
          Select the key to play this bookmark.
−
           This allows you to define playlist bookmarks.
+
      --global-key-play-bookmark5=<string>
−
       --bookmark9=<string>      Playlist bookmark 9
+
                                Play playlist bookmark 5
−
           This allows you to define playlist bookmarks.
+
          Select the key to play this bookmark.
−
       --bookmark10=<string>      Playlist bookmark 10
+
      --key-play-bookmark5=<string>
−
           This allows you to define playlist bookmarks.
+
                                Play playlist bookmark 5
−
   -h, --help, --no-help          print help for VLC (can be combined with
+
          Select the key to play this bookmark.
−
                                 --advanced and --help-verbose) (default
+
      --global-key-play-bookmark6=<string>
−
                                disabled)
+
                                Play playlist bookmark 6
−
   -H, --full-help, --no-full-help
+
          Select the key to play this bookmark.
−
                                 Exhaustive help for VLC and its modules
+
      --key-play-bookmark6=<string>
 +
                                Play playlist bookmark 6
 +
          Select the key to play this bookmark.
 +
      --global-key-play-bookmark7=<string>
 +
                                Play playlist bookmark 7
 +
          Select the key to play this bookmark.
 +
      --key-play-bookmark7=<string>
 +
                                Play playlist bookmark 7
 +
          Select the key to play this bookmark.
 +
      --global-key-play-bookmark8=<string>
 +
                                Play playlist bookmark 8
 +
          Select the key to play this bookmark.
 +
      --key-play-bookmark8=<string>
 +
                                Play playlist bookmark 8
 +
          Select the key to play this bookmark.
 +
      --global-key-play-bookmark9=<string>
 +
                                Play playlist bookmark 9
 +
          Select the key to play this bookmark.
 +
      --key-play-bookmark9=<string>
 +
                                Play playlist bookmark 9
 +
          Select the key to play this bookmark.
 +
      --global-key-play-bookmark10=<string>  
 +
                                 Play playlist bookmark 10
 +
           Select the key to play this bookmark.
 +
       --key-play-bookmark10=<string>  
 +
                                 Play playlist bookmark 10
 +
           Select the key to play this bookmark.
 +
      --global-key-clear-playlist=<string>
 +
                                Clear the playlist
 +
          Select the key to clear the current playlist.
 +
      --key-clear-playlist=<string>
 +
                                Clear the playlist
 +
          Select the key to clear the current playlist.
 +
      --global-key-subtitle-text-scale-normal=<string>
 +
                                Reset subtitles text scale
 +
          Select the key to change subtitles text scaling
 +
      --key-subtitle-text-scale-normal=<string>
 +
                                Reset subtitles text scale
 +
          Select the key to change subtitles text scaling
 +
      --global-key-subtitle-text-scale-up=<string>
 +
                                Scale down subtitles text
 +
          Select the key to change subtitles text scaling
 +
      --key-subtitle-text-scale-up=<string>
 +
                                Scale down subtitles text
 +
          Select the key to change subtitles text scaling
 +
      --global-key-subtitle-text-scale-down=<string>
 +
                                Scale up subtitles text
 +
          Select the key to change subtitles text scaling
 +
      --key-subtitle-text-scale-down=<string>
 +
                                Scale up subtitles text
 +
          Select the key to change subtitles text scaling
 +
       --bookmark1=<string>      Playlist bookmark 1
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark2=<string>      Playlist bookmark 2
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark3=<string>      Playlist bookmark 3
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark4=<string>      Playlist bookmark 4
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark5=<string>      Playlist bookmark 5
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark6=<string>      Playlist bookmark 6
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark7=<string>      Playlist bookmark 7
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark8=<string>      Playlist bookmark 8
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark9=<string>      Playlist bookmark 9
 +
           This allows you to define playlist bookmarks.
 +
       --bookmark10=<string>      Playlist bookmark 10
 +
           This allows you to define playlist bookmarks.
 +
   -h, --help, --no-help          print help for VLC (can be combined with
 +
                                 --advanced and --help-verbose)
 +
                                (default disabled)
 +
   -H, --full-help, --no-full-help  
 +
                                 Exhaustive help for VLC and its modules
 +
                                (default disabled)
 +
      --longhelp, --no-longhelp  print help for VLC and all its modules (can be
 +
                                combined with --advanced and --help-verbose)
 +
                                (default disabled)
 +
      --help-verbose, --no-help-verbose
 +
                                ask for extra verbosity when displaying help
 +
                                (default disabled)
 +
  -l, --list, --no-list          print a list of available modules
 +
                                (default disabled)
 +
      --list-verbose, --no-list-verbose
 +
                                print a list of available modules with extra
 +
                                detail
 +
                                (default disabled)
 +
  -p, --module=<string>          print help on a specific module (can be
 +
                                combined with --advanced and --help-verbose).
 +
                                Prefix the module name with = for strict
 +
                                matches.
 +
      --ignore-config, --no-ignore-config
 +
                                no configuration option will be loaded nor
 +
                                saved to config file
 +
                                (default enabled)
 +
      --reset-config, --no-reset-config
 +
                                reset the current config to the default values
 +
                                (default disabled)
 +
      --reset-plugins-cache, --no-reset-plugins-cache
 +
                                resets the current plugins cache
 
                                 (default disabled)
 
                                 (default disabled)
−
       --longhelp, --no-longhelp  print help for VLC and all its modules (can
+
       --version, --no-version    print version information
−
                                be combined with --advanced and
 
−
                                --help-verbose) (default disabled)
 
−
      --help-verbose, --no-help-verbose
 
−
                                ask for extra verbosity when displaying help
 
 
                                 (default disabled)
 
                                 (default disabled)
−
  -l, --list, --no-list          print a list of available modules (default
 
−
                                disabled)
 
−
      --list-verbose, --no-list-verbose
 
−
                                print a list of available modules with extra
 
−
                                detail (default disabled)
 
−
  -p, --module=<string>          print help on a specific module (can be
 
−
                                combined with --advanced and --help-verbose).
 
−
                                Prefix the module name with = for strict
 
−
                                matches.
 
−
      --ignore-config, --no-ignore-config
 
−
                                no configuration option will be loaded nor
 
−
                                saved to config file (default enabled)
 
−
      --reset-config, --no-reset-config
 
−
                                reset the current config to the default
 
−
                                values (default disabled)
 
−
      --reset-plugins-cache, --no-reset-plugins-cache
 
−
                                resets the current plugins cache (default
 
−
                                disabled)
 
−
      --version, --no-version    print version information (default disabled)
 
 
       --config=<string>          use alternate config file
 
       --config=<string>          use alternate config file
−
</nowiki>
 
  
−
==See also==
+
Note: 2 modules were not displayed because they only have advanced options.
−
*[[Mac OS X]] for special notes on using the command line on Mac OS X
 
  
−
[[Category:Documentation]]
+
</pre></small>

Latest revision as of 04:03, 19 April 2019

See also: Command-line interface and Console interfaces
VLC command-line help for Windows users about VLC media player
VLC-0-8-6 command-line help, VLC-0-9-x command-line help, VLC-1-0-x command-line help, VLC-1-1-x command-line help, VLC-2-1-x command-line help

Running the command 

vlc --help

will create a .TXT file containing all the command-line options.

You can also use this to get more exhaustive list: 

vlc -H

If you look for help, on a particular module, you can also use 

vlc -p module --advanced --help-verbose

--help-verbose explains things. Omit this option if too much output is generated

To view this without leaving the command-line in Windows, use the following command (assuming you installed it in the default folder): 

more "%PROGRAMFILES%\VideoLAN\VLC\vlc-help.txt"

This trick uses the command-line command more to show the file screen-by-screen. Pressing spacebar will advance the output a screen at a time, and pressing enter will advance the output one line at a time.

Undocumented option: 

-vv     "Verbose verbose". Verbose output (debug infos can be displayed by selecting "Debug logging" interface under View->Add Interface menu)

Here's the output of vlc -H of vlc-4.0.0-dev under Windows. If the text is too small, pressing Ctrl and + together in most browsers will increase the font size (reset with Ctrl and 0 together). 

Usage: vlc [options] [stream] ...
You can specify multiple streams on the commandline.
They will be enqueued in the playlist.
The first item specified will be played first.

Options-styles:
  --option  A global option that is set for the duration of the program.
   -option  A single letter version of a global --option.
   :option  An option that only applies to the stream directly before it
            and that overrides previous settings.

Stream MRL syntax:
  [[access][/demux]://]URL[#[title][:chapter][-[title][:chapter]]]
  [:option=value ...]

  Many of the global --options can also be used as MRL specific :options.
  Multiple :option=value pairs can be specified.

URL syntax:
  file:///path/file              Plain media file
  http://host[:port]/file        HTTP URL
  ftp://host[:port]/file         FTP URL
  mms://host[:port]/file         MMS URL
  screen://                      Screen capture
  dvd://[device]                 DVD device
  vcd://[device]                 VCD device
  cdda://[device]                Audio CD device
  udp://[[<source address>]@[<bind address>][:<bind port>]]
                                 UDP stream sent by a streaming server
  vlc://pause:<seconds>          Pause the playlist for a certain time
  vlc://quit                     Special item to quit VLC


 Visualizer filter (visual)
   General:
      --effect-list=<string>     Effects list
          A list of visual effect, separated by commas. Current effects
          include: dummy, scope, spectrum, spectrometer and vuMeter.
      --effect-width=<integer>   Video width
          The width of the effects video window, in pixels.
      --effect-height=<integer>  Video height
          The height of the effects video window, in pixels.
      --effect-fft-window={none,hann,flattop,blackmanharris,kaiser} 
                                 FFT window
          The type of FFT window to use for spectrum-based visualizations.
      --effect-kaiser-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Kaiser window parameter
          The parameter alpha for the Kaiser window. Increasing alpha increases
          the main-lobe width and decreases the side-lobe amplitude.
   Spectrum analyser:
      --visual-80-bands, --no-visual-80-bands 
                                 Show 80 bands instead of 20
                                 (default enabled)
          Show 80 bands instead of 20
      --visual-peaks, --no-visual-peaks 
                                 Draw peaks in the analyzer
                                 (default enabled)
          Draw peaks in the analyzer
   Spectrometer:
      --spect-show-original, --no-spect-show-original 
                                 Enable original graphic spectrum
                                 (default disabled)
          Enable the "flat" spectrum analyzer in the spectrometer.
      --spect-show-base, --no-spect-show-base 
                                 Draw the base of the bands
                                 (default enabled)
          Draw the base of the bands
      --spect-radius=<integer>   Base pixel radius
          Defines radius size in pixels, of base of bands(beginning).
      --spect-sections=<integer [1 .. 2147483647]> 
                                 Spectral sections
          Determines how many sections of spectrum will exist.
      --spect-color=<integer>    V-plane color
          YUV-Color cube shifting across the V-plane ( 0 - 127 ).
      --spect-show-bands, --no-spect-show-bands 
                                 Draw bands in the spectrometer
                                 (default enabled)
          Draw bands in the spectrometer
      --spect-80-bands, --no-spect-80-bands 
                                 Show 80 bands instead of 20
                                 (default enabled)
          Show 80 bands instead of 20
      --spect-separ=<integer>    Number of blank pixels between bands.
          Number of blank pixels between bands.
      --spect-amp=<integer>      Amplification
          This is a coefficient that modifies the height of the bands.
      --spect-show-peaks, --no-spect-show-peaks 
                                 Draw peaks in the analyzer
                                 (default enabled)
          Draw peaks in the analyzer
      --spect-peak-width=<integer> 
                                 Peak extra width
          Additions or subtractions of pixels on the peak width.
      --spect-peak-height=<integer> 
                                 Peak height
          Total pixel height of the peak items.

 libprojectM effect (projectm)
      --projectm-preset-path=<string> 
                                 projectM preset path
          Path to the projectM preset directory
      --projectm-title-font=<string> 
                                 Title font
          Font used for the titles
      --projectm-menu-font=<string> 
                                 Font menu
          Font used for the menus
      --projectm-width=<integer> Video width
          The width of the video window, in pixels.
      --projectm-height=<integer> 
                                 Video height
          The height of the video window, in pixels.
      --projectm-meshx=<integer> Mesh width
          The width of the mesh, in pixels.
      --projectm-meshy=<integer> Mesh height
          The height of the mesh, in pixels.
      --projectm-texture-size=<integer> 
                                 Texture size
          The size of the texture, in pixels.

 Goom effect (goom)
      --goom-width=<integer>     Goom display width
          This allows you to set the resolution of the Goom display (bigger
          resolution will be prettier but more CPU intensive).
      --goom-height=<integer>    Goom display height
          This allows you to set the resolution of the Goom display (bigger
          resolution will be prettier but more CPU intensive).
      --goom-speed=<integer [1 .. 10]> 
                                 Goom animation speed
          This allows you to set the animation speed (between 1 and 10,
          defaults to 6).

 3D OpenGL spectrum visualization (glspectrum)
      --glspectrum-width=<integer> 
                                 Video width
          The width of the visualization window, in pixels.
      --glspectrum-height=<integer> 
                                 Video height
          The height of the visualization window, in pixels.

 Wall video filter (wall)
      --wall-cols=<integer [1 .. 15]> 
                                 Number of columns
          Number of horizontal windows in which to split the video.
      --wall-rows=<integer [1 .. 15]> 
                                 Number of rows
          Number of vertical windows in which to split the video.
      --wall-active=<string>     Active windows
          Comma-separated list of active windows, defaults to all
      --wall-element-aspect=<string> 
                                 Element aspect ratio
          Aspect ratio of the individual displays building the wall.

 Panoramix: wall with overlap video filter (panoramix)
 Split the video in multiple windows to display on a wall of screens
      --panoramix-cols=<integer [-1 .. 15]> 
                                 Number of columns
          Select the number of horizontal video windows in which to split the
          video
      --panoramix-rows=<integer [-1 .. 15]> 
                                 Number of rows
          Select the number of vertical video windows in which to split the
          video
      --panoramix-bz-length=<integer [0 .. 100]> 
                                 length of the overlapping area (in %)
          Select in percent the length of the blended zone
      --panoramix-bz-height=<integer [0 .. 100]> 
                                 height of the overlapping area (in %)
          Select in percent the height of the blended zone (case of 2x2 wall)
      --panoramix-attenuate, --no-panoramix-attenuate 
                                 Attenuation
                                 (default enabled)
          Check this option if you want attenuate blended zone by this plug-in
          (if option is unchecked, attenuate is made by opengl)
      --panoramix-bz-begin=<integer [0 .. 100]> 
                                 Attenuation, begin (in %)
          Select in percent the Lagrange coefficient of the beginning blended
          zone
      --panoramix-bz-middle=<integer [0 .. 100]> 
                                 Attenuation, middle (in %)
          Select in percent the Lagrange coefficient of the middle of blended
          zone
      --panoramix-bz-end=<integer [0 .. 100]> 
                                 Attenuation, end (in %)
          Select in percent the Lagrange coefficient of the end of blended zone
      --panoramix-bz-middle-pos=<integer [1 .. 99]> 
                                 middle position (in %)
          Select in percent (50 is center) the position of the middle point
          (Lagrange) of blended zone
      --panoramix-bz-gamma-red=<float [0.000000 .. 5.000000]> 
                                 Gamma (Red) correction
          Select the gamma for the correction of blended zone (Red or Y
          component)
      --panoramix-bz-gamma-green=<float [0.000000 .. 5.000000]> 
                                 Gamma (Green) correction
          Select the gamma for the correction of blended zone (Green or U
          component)
      --panoramix-bz-gamma-blue=<float [0.000000 .. 5.000000]> 
                                 Gamma (Blue) correction
          Select the gamma for the correction of blended zone (Blue or V
          component)
      --panoramix-bz-blackcrush-red=<integer [0 .. 255]> 
                                 Black Crush for Red
          Select the Black Crush of blended zone (Red or Y component)
      --panoramix-bz-blackcrush-green=<integer [0 .. 255]> 
                                 Black Crush for Green
          Select the Black Crush of blended zone (Green or U component)
      --panoramix-bz-blackcrush-blue=<integer [0 .. 255]> 
                                 Black Crush for Blue
          Select the Black Crush of blended zone (Blue or V component)
      --panoramix-bz-whitecrush-red=<integer [0 .. 255]> 
                                 White Crush for Red
          Select the White Crush of blended zone (Red or Y component)
      --panoramix-bz-whitecrush-green=<integer [0 .. 255]> 
                                 White Crush for Green
          Select the White Crush of blended zone (Green or U component)
      --panoramix-bz-whitecrush-blue=<integer [0 .. 255]> 
                                 White Crush for Blue
          Select the White Crush of blended zone (Blue or V component)
      --panoramix-bz-blacklevel-red=<integer [0 .. 255]> 
                                 Black Level for Red
          Select the Black Level of blended zone (Red or Y component)
      --panoramix-bz-blacklevel-green=<integer [0 .. 255]> 
                                 Black Level for Green
          Select the Black Level of blended zone (Green or U component)
      --panoramix-bz-blacklevel-blue=<integer [0 .. 255]> 
                                 Black Level for Blue
          Select the Black Level of blended zone (Blue or V component)
      --panoramix-bz-whitelevel-red=<integer [0 .. 255]> 
                                 White Level for Red
          Select the White Level of blended zone (Red or Y component)
      --panoramix-bz-whitelevel-green=<integer [0 .. 255]> 
                                 White Level for Green
          Select the White Level of blended zone (Green or U component)
      --panoramix-bz-whitelevel-blue=<integer [0 .. 255]> 
                                 White Level for Blue
          Select the White Level of blended zone (Blue or V component)
      --panoramix-active=<string> 
                                 Active windows
          Comma-separated list of active windows, defaults to all

 Clone video filter (clone)
 Duplicate your video to multiple windows and/or video output modules
      --clone-count=<integer>    Number of clones
          Number of video windows in which to clone the video.
      --clone-vout-list=<string> Video output modules
          You can use specific video output modules for the clones. Use a
          comma-separated list of modules.

 YUV video output (yuv)
      --yuv-file=<string>        device, fifo or filename
          device, fifo or filename to write yuv frames too.
      --yuv-chroma=<string>      Chroma used
          Force use of a specific chroma for output.
      --yuv-yuv4mpeg2, --no-yuv-yuv4mpeg2 
                                 Add a YUV4MPEG2 header
                                 (default disabled)
          The YUV4MPEG2 header is compatible with mplayer yuv video output and
          requires YV12/I420 fourcc.

 WGL extension for OpenGL (wgl)
      --gpu-affinity=<integer>   GPU affinity
          GPU affinity

 Video memory output (vmem)
      --vmem-width=<integer>     Width
          Video memory buffer width.
      --vmem-height=<integer>    Height
          Video memory buffer height.
      --vmem-pitch=<integer>     Pitch
          Video memory buffer pitch in bytes.
      --vmem-chroma=<string>     Chroma
          Output chroma for the memory image as a 4-character string, eg.
          "RV32".

 Dummy video output (vdummy)
      --dummy-chroma=<string>    Dummy image chroma format
          Force the dummy video output to create images using a specific chroma
          format instead of trying to improve performances by using the most
          efficient one.

 OpenGL video output (gl)
      --gl={any,wgl,none}        OpenGL extension
          Extension through which to use the Open Graphics Library (OpenGL).
      --glconv={any,direct3d9,none} 
                                 Open GL/GLES hardware converter
          Force a "glconv" module.
   Colorspace conversion:
      --rendering-intent={0 (Perceptual), 1 (Relative colorimetric), 2 (Absolute colorimetric), 3 (Saturation)} 
                                 Rendering intent for color conversion
          The algorithm used to convert between color spaces
      --target-prim={0 (Unknown primaries), 1 (ITU-R Rec. BT.601 (525-line = NTSC, SMPTE-C)), 2 (ITU-R Rec. BT.601 (625-line = PAL, SECAM)), 3 (ITU-R Rec. BT.709 (HD), also sRGB), 4 (ITU-R Rec. BT.470 M), 5 (ITU-R Rec. BT.2020 (UltraHD)), 6 (Apple RGB), 7 (Adobe RGB (1998)), 8 (ProPhoto RGB (ROMM)), 9 (CIE 1931 RGB primaries), 10 (DCI-P3 (Digital Cinema)), 11 (Panasonic V-Gamut (VARICAM)), 12 (Sony S-Gamut)} 
                                 Display primaries
          The primaries associated with the output display
      --target-trc={0 (Unknown gamma), 1 (ITU-R Rec. BT.1886 (CRT emulation + OOTF)), 2 (IEC 61966-2-4 sRGB (CRT emulation)), 3 (Linear light content), 4 (Pure power gamma 1.8), 5 (Pure power gamma 2.2), 6 (Pure power gamma 2.8), 7 (ProPhoto RGB (ROMM)), 8 (ITU-R BT.2100 PQ (perceptual quantizer), aka SMPTE ST2048), 9 (ITU-R BT.2100 HLG (hybrid log-gamma), aka ARIB STD-B67), 10 (Panasonic V-Log (VARICAM)), 11 (Sony S-Log1), 12 (Sony S-Log2)} 
                                 Display gamma / transfer function
          The gamma/transfer function associated with the output display
   Tone mapping:
      --tone-mapping={3 (Hable (filmic mapping, recommended)), 1 (Mobius (linear + knee)), 2 (Reinhard (simple non-linear)), 4 (Gamma-Power law), 5 (Linear stretch (peak to peak)), 0 (Hard clip out-of-gamut)} 
                                 Tone-mapping algorithm
          Algorithm to use when converting from wide gamut to standard gamut,
          or from HDR to SDR
      --tone-mapping-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Tone-mapping parameter
          This parameter can be used to tune the tone-mapping curve. Specifics
          depend on the curve used.
      --tone-mapping-desat=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Tone-mapping desaturation coefficient
          How strongly to desaturate overbright colors towards white. 0.0
          disables this behavior.
      --tone-mapping-warn, --no-tone-mapping-warn 
                                 Highlight clipped pixels
                                 (default disabled)
          Debugging tool to indicate which pixels were clipped as part of the
          tone mapping process.
   Dithering:
      --dither-algo={-1 (Disabled), 0 (Blue noise), 3 (White noise), 1 (Bayer matrix (ordered dither))} 
                                 Dithering algorithm
          The algorithm to use when dithering to a lower bit depth (degrades
          performance on some platforms).
      --dither-depth=<integer [0 .. 16]> 
                                 Dither depth override (0 = framebuffer depth)
          Overrides the detected framebuffer depth. Useful to dither to lower
          bit depths than otherwise required.

 OpenGL video output for Windows (glwin32)
      --glconv={any,direct3d9,none} 
                                 Open GL/GLES hardware converter
          Force a "glconv" module.
   Colorspace conversion:
      --rendering-intent={0 (Perceptual), 1 (Relative colorimetric), 2 (Absolute colorimetric), 3 (Saturation)} 
                                 Rendering intent for color conversion
          The algorithm used to convert between color spaces
      --target-prim={0 (Unknown primaries), 1 (ITU-R Rec. BT.601 (525-line = NTSC, SMPTE-C)), 2 (ITU-R Rec. BT.601 (625-line = PAL, SECAM)), 3 (ITU-R Rec. BT.709 (HD), also sRGB), 4 (ITU-R Rec. BT.470 M), 5 (ITU-R Rec. BT.2020 (UltraHD)), 6 (Apple RGB), 7 (Adobe RGB (1998)), 8 (ProPhoto RGB (ROMM)), 9 (CIE 1931 RGB primaries), 10 (DCI-P3 (Digital Cinema)), 11 (Panasonic V-Gamut (VARICAM)), 12 (Sony S-Gamut)} 
                                 Display primaries
          The primaries associated with the output display
      --target-trc={0 (Unknown gamma), 1 (ITU-R Rec. BT.1886 (CRT emulation + OOTF)), 2 (IEC 61966-2-4 sRGB (CRT emulation)), 3 (Linear light content), 4 (Pure power gamma 1.8), 5 (Pure power gamma 2.2), 6 (Pure power gamma 2.8), 7 (ProPhoto RGB (ROMM)), 8 (ITU-R BT.2100 PQ (perceptual quantizer), aka SMPTE ST2048), 9 (ITU-R BT.2100 HLG (hybrid log-gamma), aka ARIB STD-B67), 10 (Panasonic V-Log (VARICAM)), 11 (Sony S-Log1), 12 (Sony S-Log2)} 
                                 Display gamma / transfer function
          The gamma/transfer function associated with the output display
   Tone mapping:
      --tone-mapping={3 (Hable (filmic mapping, recommended)), 1 (Mobius (linear + knee)), 2 (Reinhard (simple non-linear)), 4 (Gamma-Power law), 5 (Linear stretch (peak to peak)), 0 (Hard clip out-of-gamut)} 
                                 Tone-mapping algorithm
          Algorithm to use when converting from wide gamut to standard gamut,
          or from HDR to SDR
      --tone-mapping-param=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Tone-mapping parameter
          This parameter can be used to tune the tone-mapping curve. Specifics
          depend on the curve used.
      --tone-mapping-desat=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Tone-mapping desaturation coefficient
          How strongly to desaturate overbright colors towards white. 0.0
          disables this behavior.
      --tone-mapping-warn, --no-tone-mapping-warn 
                                 Highlight clipped pixels
                                 (default disabled)
          Debugging tool to indicate which pixels were clipped as part of the
          tone mapping process.
   Dithering:
      --dither-algo={-1 (Disabled), 0 (Blue noise), 3 (White noise), 1 (Bayer matrix (ordered dither))} 
                                 Dithering algorithm
          The algorithm to use when dithering to a lower bit depth (degrades
          performance on some platforms).
      --dither-depth=<integer [0 .. 16]> 
                                 Dither depth override (0 = framebuffer depth)
          Overrides the detected framebuffer depth. Useful to dither to lower
          bit depths than otherwise required.

 Flaschen-Taschen video output (flaschen)
      --flaschen-display=<string> 
                                 Flaschen-Taschen display address
          IP address or hostname of the Flaschen-Taschen display. Something
          like ft.noise or ftkleine.noise
      --flaschen-width=<integer> Width
          Video width
      --flaschen-height=<integer> 
                                 Height
          Video height

 Embedded window video (drawable)
      --drawable-hwnd=<integer>  Window handle (HWND)
          Video will be embedded in this pre-existing window. If zero, a new
          window will be created.

 DirectX (DirectDraw) video output (directdraw)
 Recommended video output for Windows XP. Incompatible with Vista's Aero interface
      --directx-hw-yuv, --no-directx-hw-yuv 
                                 Use hardware YUV->RGB conversions
                                 (default enabled)
          Try to use hardware acceleration for YUV->RGB conversions. This
          option doesn't have any effect when using overlays.
      --directx-overlay, --no-directx-overlay 
                                 Overlay video output
                                 (default enabled)
          Overlay is the hardware acceleration capability of your video card
          (ability to render video directly). VLC will try to use it by
          default.
      --directx-use-sysmem, --no-directx-use-sysmem 
                                 Use video buffers in system memory
                                 (default disabled)
          Create video buffers in system memory instead of video memory. This
          isn't recommended as usually using video memory allows benefiting
          from more hardware acceleration (like rescaling or YUV->RGB
          conversions). This option doesn't have any effect when using
          overlays.
      --directx-3buffering, --no-directx-3buffering 
                                 Use triple buffering for overlays
                                 (default enabled)
          Try to use triple buffering when using YUV overlays. That results in
          much better video quality (no flickering).
      --directx-device={,display,\\.\DISPLAY1} 
                                 Name of desired display device
          In a multiple monitor configuration, you can specify the Windows
          device name of the display that you want the video window to open on.
          For example, "\\.\DISPLAY1" or "\\.\DISPLAY2".

 Direct3D9 video output (direct3d9)
 Recommended video output for Windows Vista and later versions
      --direct3d9-hw-blending, --no-direct3d9-hw-blending 
                                 Use hardware blending support
                                 (default enabled)
          Try to use hardware acceleration for subtitle/OSD blending.
      --direct3d9-shader={Disabled,Invert,Grayscale,Convert601to709,GammaCorrection18,GammaCorrection22,GammaCorrectionBT709,WidenColorSpace,HLSL File} 
                                 Pixel Shader
          Choose a pixel shader to apply.
      --direct3d9-shader-file=<string> 
                                 Path to HLSL file
          Path to an HLSL file containing a single pixel shader.

 Direct3D11 video output (direct3d11)
 Recommended video output for Windows 8 and later versions
      --direct3d11-hw-blending, --no-direct3d11-hw-blending 
                                 Use hardware blending support
                                 (default enabled)
          Try to use hardware acceleration for subtitle/OSD blending.

 Video transformation filter (transform)
 Rotate or flip the video
      --transform-type={90,180,270,hflip,vflip,transpose,antitranspose} 
                                 Transform type
          Transform type

 Sharpen video filter (sharpen)
 Augment contrast between contours.
      --sharpen-sigma=<float [0.000000 .. 2.000000]> 
                                 Sharpen strength (0-2)
          Set the Sharpen strength, between 0 and 2. Defaults to 0.05.

 Sepia video filter (sepia)
 Gives video a warmer tone by applying sepia effect
      --sepia-intensity=<integer [0 .. 255]> 
                                 Sepia intensity
          Intensity of sepia effect

 Scene video filter (scene)
 Send your video to picture files
      --scene-format=<string>    Image format
          Format of the output images (png, jpeg, ...).
      --scene-width=<integer>    Image width
          You can enforce the image width. By default (-1) VLC will adapt to
          the video characteristics.
      --scene-height=<integer>   Image height
          You can enforce the image height. By default (-1) VLC will adapt to
          the video characteristics.
      --scene-prefix=<string>    Filename prefix
          Prefix of the output images filenames. Output filenames will have the
          "prefixNUMBER.format" form if replace is not true.
      --scene-path=<string>      Directory path prefix
          Directory path where images files should be saved. If not set, then
          images will be automatically saved in users homedir.
      --scene-replace, --no-scene-replace 
                                 Always write to the same file
                                 (default disabled)
          Always write to the same file instead of creating one file per image.
          In this case, the number is not appended to the filename.
      --scene-ratio=<integer [1 .. 2147483647]> 
                                 Recording ratio
          Ratio of images to record. 3 means that one image out of three is
          recorded.

 Rotate video filter (rotate)
      --rotate-angle=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Angle in degrees
          Angle in degrees (0 to 359)
      --rotate-use-motion, --no-rotate-use-motion 
                                 Use motion sensors
                                 (default disabled)
          Use HDAPS, AMS, APPLESMC or UNIMOTION motion sensors to rotate the
          video

 Puzzle interactive game video filter (puzzle)
      --puzzle-rows=<integer [2 .. 42]> 
                                 Number of puzzle rows
          Number of puzzle rows
      --puzzle-cols=<integer [2 .. 42]> 
                                 Number of puzzle columns
          Number of puzzle columns
      --puzzle-border=<integer [0 .. 40]> 
                                 Border
          Unshuffled Border width.
      --puzzle-preview, --no-puzzle-preview 
                                 Small preview
                                 (default disabled)
          Show small preview.
      --puzzle-preview-size=<integer [0 .. 100]> 
                                 Small preview size
          Show small preview size (percent of source).
      --puzzle-shape-size=<integer [0 .. 100]> 
                                 Piece edge shape size
          Size of the curve along the piece's edge
      --puzzle-auto-shuffle=<integer [0 .. 30000]> 
                                 Auto shuffle
          Auto shuffle delay during game
      --puzzle-auto-solve=<integer [0 .. 30000]> 
                                 Auto solve
          Auto solve delay during game
      --puzzle-rotation={0 (0), 1 (0/180), 2 (0/90/180/270), 3 (0/90/180/270/mirror)} 
                                 Rotation
          Rotation parameter: none;180;90-270;mirror
      --puzzle-mode={0 (jigsaw puzzle), 1 (sliding puzzle), 2 (swap puzzle), 3 (exchange puzzle)} 
                                 Game mode
          Select game mode variation from jigsaw puzzle to sliding puzzle.

 Video post processing filter (postproc)
      --postproc-q=<integer [0 .. 6]> 
                                 Post processing quality
          Quality of post processing. Valid range is 0 (disabled) to 6
          (highest) Higher levels require more CPU power, but produce higher
          quality pictures. With default filter chain, the values map to the
          following filters: 1: hb, 2-4: hb+vb, 5-6: hb+vb+dr
      --postproc-name=<string>   FFmpeg post processing filter chains
          FFmpeg post processing filter chains

 Posterize video filter (posterize)
 Posterize video by lowering the number of colors
      --posterize-level=<integer [2 .. 256]> 
                                 Posterize level
          Posterize level (number of colors is cube of this value)

 Motion blur filter (motionblur)
      --blur-factor=<integer [1 .. 127]> 
                                 Blur factor (1-127)
          The degree of blurring from 1 to 127.

 Mirror video filter (mirror)
 Splits video in two same parts, like in a mirror
      --mirror-split={0 (Vertical), 1 (Horizontal)} 
                                 Mirror orientation
          Defines orientation of the mirror splitting. Can be vertical or
          horizontal.
      --mirror-direction={0 (Left to right/Top to bottom), 1 (Right to left/Bottom to top)} 
                                 Direction
          Direction of the mirroring.

 High Quality 3D Denoiser filter (hqdn3d)
      --hqdn3d-luma-spat=<float [0.000000 .. 254.000000]> 
                                 Spatial luma strength (0-254)
          Spatial luma strength (0-254)
      --hqdn3d-chroma-spat=<float [0.000000 .. 254.000000]> 
                                 Spatial chroma strength (0-254)
          Spatial chroma strength (0-254)
      --hqdn3d-luma-temp=<float [0.000000 .. 254.000000]> 
                                 Temporal luma strength (0-254)
          Temporal luma strength (0-254)
      --hqdn3d-chroma-temp=<float [0.000000 .. 254.000000]> 
                                 Temporal chroma strength (0-254)
          Temporal chroma strength (0-254)

 Grain video filter (grain)
 Adds filtered gaussian noise
      --grain-variance=<float [0.000000 .. 10.000000]> 
                                 Variance
          Variance of the gaussian noise
      --grain-period-min=<integer [1 .. 64]> 
                                 Minimal period
          Minimal period of the noise grain in pixel
      --grain-period-max=<integer [1 .. 64]> 
                                 Maximal period
          Maximal period of the noise grain in pixel

 Gradient video filter (gradient)
 Apply color gradient or edge detection effects
      --gradient-mode={gradient,edge,hough} 
                                 Distort mode
          Distort mode, one of "gradient", "edge" and "hough".
      --gradient-type=<integer [0 .. 1]> 
                                 Gradient image type
          Gradient image type (0 or 1). 0 will turn the image to white while 1
          will keep colors.
      --gradient-cartoon, --no-gradient-cartoon 
                                 Apply cartoon effect
                                 (default enabled)
          Apply cartoon effect. It is only used by "gradient" and "edge".

 Gradfun video filter (gradfun)
 Debanding algorithm
      --gradfun-radius=<integer [4 .. 32]> 
                                 Radius
          Radius in pixels
      --gradfun-strength=<float [0.510000 .. 255.000000]> 
                                 Strength
          Strength used to modify the value of a pixel

 Gaussian blur video filter (gaussianblur)
 Add a blurring effect
      --gaussianblur-sigma=<float [0.010000 .. 4096.000000]> 
                                 Gaussian's std deviation
          Gaussian's standard deviation. The blurring will take into account
          pixels up to 3*sigma away in any direction.

 FPS conversion video filter (fps)
      --fps-fps=<string>         Frame rate
          Frame rate

 Extract RGB component video filter (extract)
      --extract-component={16711680 (Red), 65280 (Green), 255 (Blue)} 
                                 RGB component to extract
          RGB component to extract. 0 for Red, 1 for Green and 2 for Blue.

 Erase video filter (erase)
 Remove zones of the video using a picture as mask
      --erase-mask=<string>      Image mask
          Image mask. Pixels with an alpha value greater than 50% will be
          erased.
      --erase-x=<integer>        X coordinate
          X coordinate of the mask.
      --erase-y=<integer>        Y coordinate
          Y coordinate of the mask.

 Deinterlacing video filter (deinterlace)
      --sout-deinterlace-mode={discard,blend,mean,bob,linear,x,yadif,yadif2x,phosphor,ivtc} 
                                 Streaming deinterlace mode
          Deinterlace method to use for streaming.
      --sout-deinterlace-phosphor-chroma={1 (Latest), 2 (AltLine), 3 (Blend), 4 (Upconvert)} 
                                 Phosphor chroma mode for 4:2:0 input
          Choose handling for colours in those output frames that fall across
          input frame boundaries.   Latest: take chroma from new (bright) field
          only. Good for interlaced input, such as videos from a camcorder.  
          AltLine: take chroma line 1 from top field, line 2 from bottom field,
          etc.  Default, good for NTSC telecined input (anime DVDs, etc.).  
          Blend: average input field chromas. May distort the colours of the
          new (bright) field, too.   Upconvert: output in 4:2:2 format
          (independent chroma for each field). Best simulation, but requires
          more CPU and memory bandwidth.
      --sout-deinterlace-phosphor-dimmer={1 (Off), 2 (Low), 3 (Medium), 4 (High)} 
                                 Phosphor old field dimmer strength
          This controls the strength of the darkening filter that simulates CRT
          TV phosphor light decay for the old field in the Phosphor framerate
          doubler. Default: Low.

 Video cropping filter (croppadd)
   Crop:
      --croppadd-croptop=<integer [0 .. 2147483647]> 
                                 Pixels to crop from top
          Number of pixels to crop from the top of the image.
      --croppadd-cropbottom=<integer [0 .. 2147483647]> 
                                 Pixels to crop from bottom
          Number of pixels to crop from the bottom of the image.
      --croppadd-cropleft=<integer [0 .. 2147483647]> 
                                 Pixels to crop from left
          Number of pixels to crop from the left of the image.
      --croppadd-cropright=<integer [0 .. 2147483647]> 
                                 Pixels to crop from right
          Number of pixels to crop from the right of the image.
   Padd:
      --croppadd-paddtop=<integer [0 .. 2147483647]> 
                                 Pixels to padd to top
          Number of pixels to padd to the top of the image after cropping.
      --croppadd-paddbottom=<integer [0 .. 2147483647]> 
                                 Pixels to padd to bottom
          Number of pixels to padd to the bottom of the image after cropping.
      --croppadd-paddleft=<integer [0 .. 2147483647]> 
                                 Pixels to padd to left
          Number of pixels to padd to the left of the image after cropping.
      --croppadd-paddright=<integer [0 .. 2147483647]> 
                                 Pixels to padd to right
          Number of pixels to padd to the right of the image after cropping.

 Color threshold filter (colorthres)
 Select one color in the video
      --colorthres-color={16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 65280 (Lime), 255 (Blue), 65535 (Aqua)} 
                                 Color
          Colors similar to this will be kept, others will be grayscaled. This
          must be an hexadecimal (like HTML colors). The first two chars are
          for red, then green, then blue. #000000 = black, #FF0000 = red,
          #00FF00 = green, #FFFF00 = yellow (red + green), #FFFFFF = white
      --colorthres-saturationthres=<integer> 
                                 Saturation threshold
      --colorthres-similaritythres=<integer> 
                                 Similarity threshold

 Canvas video filter (canvas)
 Automatically resize and pad a video
      --canvas-width=<integer [0 .. 2147483647]> 
                                 Output width
          Output (canvas) image width
      --canvas-height=<integer [0 .. 2147483647]> 
                                 Output height
          Output (canvas) image height
      --canvas-aspect=<string>   Output picture aspect ratio
          Set the canvas' picture aspect ratio. If omitted, the canvas is
          assumed to have the same SAR as the input.
      --canvas-padd, --no-canvas-padd 
                                 Pad video
                                 (default enabled)
          If enabled, video will be padded to fit in canvas after scaling.
          Otherwise, video will be cropped to fix in canvas after scaling.

 Bluescreen video filter (bluescreen)
 This effect, also known as "greenscreen" or "chroma key" blends the "blue parts" of the foreground image of the mosaic on the background (like weather forecasts). You can choose the "key" color for blending (blue by default).
      --bluescreen-u=<integer [0 .. 255]> 
                                 Bluescreen U value
          "U" value for the bluescreen key color (in YUV values). From 0 to
          255. Defaults to 120 for blue.
      --bluescreen-v=<integer [0 .. 255]> 
                                 Bluescreen V value
          "V" value for the bluescreen key color (in YUV values). From 0 to
          255. Defaults to 90 for blue.
      --bluescreen-ut=<integer [0 .. 255]> 
                                 Bluescreen U tolerance
          Tolerance of the bluescreen blender on color variations for the U
          plane. A value between 10 and 20 seems sensible.
      --bluescreen-vt=<integer [0 .. 255]> 
                                 Bluescreen V tolerance
          Tolerance of the bluescreen blender on color variations for the V
          plane. A value between 10 and 20 seems sensible.

 Blending benchmark filter (blendbench)
   Benchmarking:
      --blendbench-loops=<integer> 
                                 Number of time to blend
          The number of time the blend will be performed
      --blendbench-alpha=<integer [0 .. 255]> 
                                 Alpha of the blended image
          Alpha with which the blend image is blended
   Base image:
      --blendbench-base-image=<string> 
                                 Image to be blended onto
          The image which will be used to blend onto
      --blendbench-base-chroma=<string> 
                                 Chroma for the base image
          Chroma which the base image will be loaded in
   Blend image:
      --blendbench-blend-image=<string> 
                                 Image which will be blended
          The image blended onto the base image
      --blendbench-blend-chroma=<string> 
                                 Chroma for the blend image
          Chroma which the blend image will be loaded in

 Ball video filter (ball)
 Augmented reality ball game
      --ball-color={red,green,blue,white} 
                                 Ball color
          Ball color
      --ball-speed=<integer [1 .. 15]> 
                                 Ball speed
          Set ball speed, the displacement value                               
           in number of pixels by frame.
      --ball-size=<integer [5 .. 30]> 
                                 Ball size
          Set ball size giving its radius in number                            
              of pixels
      --ball-gradient-threshold=<integer [1 .. 200]> 
                                 Gradient threshold
          Set gradient threshold for edge computation.
      --ball-edge-visible, --no-ball-edge-visible 
                                 Edge visible
                                 (default enabled)
          Set edge visibility.

 Antiflicker video filter (antiflicker)
      --antiflicker-window-size=<integer [0 .. 100]> 
                                 Window size
          Number of frames (0 to 100)
      --antiflicker-softening-size=<integer [0 .. 31]> 
                                 Softening value
          Number of frames consider for smoothening (0 to 30)

 Convert 3D picture to anaglyph image video filter (anaglyph)
      --anaglyph-scheme={red-green,red-blue,red-cyan,trioscopic,magenta-cyan} 
                                 Color scheme
          Define the glasses' color scheme

 Alpha mask video filter (alphamask)
 Use an image's alpha channel as a transparency mask.
      --alphamask-mask=<string>  Transparency mask
          Alpha blending transparency mask. Uses a png alpha channel.

 Image properties filter (adjust)
      --contrast=<float [0.000000 .. 2.000000]> 
                                 Image contrast (0-2)
          Set the image contrast, between 0 and 2. Defaults to 1.
      --brightness=<float [0.000000 .. 2.000000]> 
                                 Image brightness (0-2)
          Set the image brightness, between 0 and 2. Defaults to 1.
      --hue=<float [-180.000000 .. 180.000000]> 
                                 Image hue (-180..180)
          Set the image hue, between -180 and 180. Defaults to 0.
      --saturation=<float [0.000000 .. 3.000000]> 
                                 Image saturation (0-3)
          Set the image saturation, between 0 and 3. Defaults to 1.
      --gamma=<float [0.010000 .. 10.000000]> 
                                 Image gamma (0-10)
          Set the image gamma, between 0.01 and 10. Defaults to 1.
      --brightness-threshold, --no-brightness-threshold 
                                 Brightness threshold
                                 (default disabled)
          When this mode is enabled, pixels will be shown as black or white.
          The threshold value will be the brightness defined below.

 Video scaling filter (swscale)
      --swscale-mode={0 (Fast bilinear), 1 (Bilinear), 2 (Bicubic (good quality)), 3 (Experimental), 4 (Nearest neighbour (bad quality)), 5 (Area), 6 (Luma bicubic / chroma bilinear), 7 (Gauss), 8 (SincR), 9 (Lanczos), 10 (Bicubic spline)} 
                                 Scaling mode
          Scaling mode to use.

 Speech synthesis for Windows (sapi)
      --sapi-voice=<integer>     Voice Index
          Voice index

 Freetype2 font renderer (freetype)
      --freetype-font=<string>   Font
          Font family for the font you want to use
      --freetype-monofont=<string> 
                                 Monospace Font
          Font family for the font you want to use
      --freetype-opacity=<integer [0 .. 255]> 
                                 Text opacity
          The opacity (inverse of transparency) of the text that will be
          rendered on the video. 0 = transparent, 255 = totally opaque.
      --freetype-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Text default color
          The color of the text that will be rendered on the video. This must
          be an hexadecimal (like HTML colors). The first two chars are for
          red, then green, then blue. #000000 = black, #FF0000 = red, #00FF00 =
          green, #FFFF00 = yellow (red + green), #FFFFFF = white
      --freetype-bold, --no-freetype-bold 
                                 Force bold
                                 (default disabled)
      --freetype-background-opacity=<integer [0 .. 255]> 
                                 Background opacity
      --freetype-background-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Background color
      --freetype-outline-opacity=<integer [0 .. 255]> 
                                 Outline opacity
      --freetype-outline-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Outline color
      --freetype-outline-thickness={0 (None), 2 (Thin), 4 (Normal), 6 (Thick)} 
                                 Outline thickness
      --freetype-shadow-opacity=<integer [0 .. 255]> 
                                 Shadow opacity
      --freetype-shadow-color={0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Shadow color
      --freetype-shadow-angle=<float [-360.000000 .. 360.000000]> 
                                 Shadow angle
      --freetype-shadow-distance=<float [0.000000 .. 1.000000]> 
                                 Shadow distance
      --freetype-yuvp, --no-freetype-yuvp 
                                 Use YUVP renderer
                                 (default disabled)
          This renders the font using "paletized YUV". This option is only
          needed if you want to encode into DVB subtitles
      --freetype-text-direction={0 (Left to right), 1 (Right to left), 2 (Auto)} 
                                 Text direction
          Paragraph base direction for the Unicode bi-directional algorithm.

 Transcode stream output (stream_out_transcode)
   Video:
      --sout-transcode-venc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none} 
                                 Video encoder
          This is the video encoder module that will be used (and its
          associated options).
      --sout-transcode-vcodec=<string> 
                                 Destination video codec
          This is the video codec that will be used.
      --sout-transcode-vb=<integer> 
                                 Video bitrate
          Target bitrate of the transcoded video stream.
      --sout-transcode-scale=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Video scaling
          Scale factor to apply to the video while transcoding (eg: 0.25)
      --sout-transcode-fps=<string> 
                                 Video frame-rate
          Target output frame rate for the video stream.
      --sout-transcode-deinterlace, --no-sout-transcode-deinterlace 
                                 Deinterlace video
                                 (default disabled)
          Deinterlace the video before encoding.
      --sout-transcode-deinterlace-module={deinterlace,ffmpeg-deinterlace} 
                                 Deinterlace module
          Specify the deinterlace module to use.
      --sout-transcode-width=<integer> 
                                 Video width
          Output video width.
      --sout-transcode-height=<integer> 
                                 Video height
          Output video height.
      --sout-transcode-maxwidth=<integer> 
                                 Maximum video width
          Maximum output video width.
      --sout-transcode-maxheight=<integer> 
                                 Maximum video height
          Maximum output video height.
      --sout-transcode-vfilter=<string> 
                                 Video filter
          Video filters will be applied to the video streams (after overlays
          are applied). You can enter a colon-separated list of filters.
   Audio:
      --sout-transcode-aenc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none} 
                                 Audio encoder
          This is the audio encoder module that will be used (and its
          associated options).
      --sout-transcode-acodec=<string> 
                                 Destination audio codec
          This is the audio codec that will be used.
      --sout-transcode-ab=<integer> 
                                 Audio bitrate
          Target bitrate of the transcoded audio stream.
      --sout-transcode-alang=<string> 
                                 Audio language
          This is the language of the audio stream.
      --sout-transcode-channels=<integer [0 .. 9]> 
                                 Audio channels
          Number of audio channels in the transcoded streams.
      --sout-transcode-samplerate=<integer [0 .. 48000]> 
                                 Audio sample rate
          Sample rate of the transcoded audio stream (11250, 22500, 44100 or
          48000).
      --sout-transcode-afilter=<string> 
                                 Audio filter
          Audio filters will be applied to the audio streams (after conversion
          filters are applied). You can enter a colon-separated list of
          filters.
   Overlays/Subtitles:
      --sout-transcode-senc={any,jpeg,png,x264,x265,opus,g711,araw,theora,vorbis,twolame,schroedinger,substx3g,webvtt,speex,flac,t140,avcodec,lpcm,dvbsub,vpx,rtpvideo,dmo,edummy,stats,qsv,none} 
                                 Subtitle encoder
          This is the subtitle encoder module that will be used (and its
          associated options).
      --sout-transcode-scodec=<string> 
                                 Destination subtitle codec
          This is the subtitle codec that will be used.
      --sout-transcode-soverlay, --no-sout-transcode-soverlay 
                                 Destination subtitle codec
                                 (default disabled)
          This is the subtitle codec that will be used.
      --sout-transcode-sfilter=<string> 
                                 Overlays
          This allows you to add overlays (also known as "subpictures") on the
          transcoded video stream. The subpictures produced by the filters will
          be overlayed directly onto the video. You can specify a
          colon-separated list of subpicture modules.
   Miscellaneous:
      --sout-transcode-threads=<integer> 
                                 Number of threads
          Number of threads used for the transcoding.
      --sout-transcode-pool-size=<integer [1 .. 1000]> 
                                 Picture pool size
          Defines how many pictures we allow to be in pool between
          decoder/encoder threads when threads > 0
      --sout-transcode-high-priority, --no-sout-transcode-high-priority 
                                 High priority
                                 (default disabled)
          Runs the optional encoder thread at the OUTPUT priority instead of
          VIDEO.

 Writes statistic info about stream (stats)
      --sout-stats-output=<string> 
                                 Output file
          Writes stats to file instead of stdout
      --sout-stats-prefix=<string> 
                                 Prefix to show on output line
          Prefix to show on output line

 Standard stream output (stream_out_standard)
      --sout-standard-access=<string> 
                                 Output access method
          Output method to use for the stream.
      --sout-standard-mux=<string> 
                                 Output muxer
          Muxer to use for the stream.
      --sout-standard-dst=<string> 
                                 Output destination
          Destination (URL) to use for the stream. Overrides path and bind
          parameters
      --sout-standard-bind=<string> 
                                 Address to bind to (helper setting for dst)
          address:port to bind vlc to listening incoming streams. Helper
          setting for dst, dst=bind+'/'+path. dst-parameter overrides this.
      --sout-standard-path=<string> 
                                 Filename for stream (helper setting for dst)
          Filename for stream. Helper setting for dst, dst=bind+'/'+path.
          dst-parameter overrides this.
      --sout-standard-sap, --no-sout-standard-sap 
                                 SAP announcing
                                 (default disabled)
          Announce this session with SAP.
      --sout-standard-name=<string> 
                                 Session name
          This is the name of the session that will be announced in the SDP
          (Session Descriptor).
      --sout-standard-description=<string> 
                                 Session description
          This allows you to give a short description with details about the
          stream, that will be announced in the SDP (Session Descriptor).
      --sout-standard-url=<string> 
                                 Session URL
          This allows you to give a URL with more details about the stream
          (often the website of the streaming organization), that will be
          announced in the SDP (Session Descriptor).
      --sout-standard-email=<string> 
                                 Session email
          This allows you to give a contact mail address for the stream, that
          will be announced in the SDP (Session Descriptor).

 Stream output to memory buffer (smem)
      --sout-smem-video-prerender-callback=<string> 
                                 Video prerender callback
          Address of the video prerender callback function. This function will
          set the buffer where render will be done.
      --sout-smem-audio-prerender-callback=<string> 
                                 Audio prerender callback
          Address of the audio prerender callback function. This function will
          set the buffer where render will be done.
      --sout-smem-video-postrender-callback=<string> 
                                 Video postrender callback
          Address of the video postrender callback function. This function will
          be called when the render is into the buffer.
      --sout-smem-audio-postrender-callback=<string> 
                                 Audio postrender callback
          Address of the audio postrender callback function. This function will
          be called when the render is into the buffer.
      --sout-smem-video-data=<string> 
                                 Video Callback data
          Data for the video callback function.
      --sout-smem-audio-data=<string> 
                                 Audio callback data
          Data for the video callback function.
      --sout-smem-time-sync, --no-sout-smem-time-sync 
                                 Time Synchronized output
                                 (default enabled)
          Time Synchronisation option for output. If true, stream will render
          as usual, else it will be rendered as fast as possible.

 Change the id of an elementary stream (setid)
   Set ES id:
      --sout-setid-id=<integer>  Elementary Stream ID
          Specify an identifier integer for this elementary stream
      --sout-setid-new-id=<integer> 
                                 New ES ID
          Specify an new identifier integer for this elementary stream
   Set ES Lang:
      --sout-setlang-id=<integer> 
                                 Elementary Stream ID
          Specify an identifier integer for this elementary stream
      --sout-setlang-lang=<string> 
                                 Language
          Specify an ISO-639 code (three characters) for this elementary stream

 RTP stream output (stream_out_rtp)
      --sout-rtp-dst=<string>    Destination
          This is the output URL that will be used.
      --sout-rtp-sdp=<string>    SDP
          This allows you to specify how the SDP (Session Descriptor) for this
          RTP session will be made available. You must use a url:
          http://location to access the SDP via HTTP, rtsp://location for RTSP
          access, and sap:// for the SDP to be announced via SAP.
      --sout-rtp-mux=<string>    Muxer
          This allows you to specify the muxer used for the streaming output.
          Default is to use no muxer (standard RTP stream).
      --sout-rtp-sap, --no-sout-rtp-sap 
                                 SAP announcing
                                 (default disabled)
          Announce this session with SAP.
      --sout-rtp-name=<string>   Session name
          This is the name of the session that will be announced in the SDP
          (Session Descriptor).
      --sout-rtp-cat=<string>    Session category
          This allows you to specify a category for the session, that will be
          announced if you choose to use SAP.
      --sout-rtp-description=<string> 
                                 Session description
          This allows you to give a short description with details about the
          stream, that will be announced in the SDP (Session Descriptor).
      --sout-rtp-url=<string>    Session URL
          This allows you to give a URL with more details about the stream
          (often the website of the streaming organization), that will be
          announced in the SDP (Session Descriptor).
      --sout-rtp-email=<string>  Session email
          This allows you to give a contact mail address for the stream, that
          will be announced in the SDP (Session Descriptor).
      --sout-rtp-proto={dccp,sctp,tcp,udp,udplite} 
                                 Transport protocol
          This selects which transport protocol to use for RTP.
      --sout-rtp-port=<integer>  Port
          This allows you to specify the base port for the RTP streaming.
      --sout-rtp-port-audio=<integer> 
                                 Audio port
          This allows you to specify the default audio port for the RTP
          streaming.
      --sout-rtp-port-video=<integer> 
                                 Video port
          This allows you to specify the default video port for the RTP
          streaming.
      --sout-rtp-ttl=<integer>   Hop limit (TTL)
          This is the hop limit (also known as "Time-To-Live" or TTL) of the
          multicast packets sent by the stream output (-1 = use operating
          system built-in default).
      --sout-rtp-rtcp-mux, --no-sout-rtp-rtcp-mux 
                                 RTP/RTCP multiplexing
                                 (default disabled)
          This sends and receives RTCP packet multiplexed over the same port as
          RTP packets.
      --sout-rtp-caching=<integer> 
                                 Caching value (ms)
          Default caching value for outbound RTP streams. This value should be
          set in milliseconds.
      --sout-rtp-key=<string>    SRTP key (hexadecimal)
          RTP packets will be integrity-protected and ciphered with this Secure
          RTP master shared secret key. This must be a 32-character-long
          hexadecimal string.
      --sout-rtp-salt=<string>   SRTP salt (hexadecimal)
          Secure RTP requires a (non-secret) master salt value. This must be a
          28-character-long hexadecimal string.
      --sout-rtp-mp4a-latm, --no-sout-rtp-mp4a-latm 
                                 MP4A LATM
                                 (default disabled)
          This allows you to stream MPEG4 LATM audio streams (see RFC3016).
      --rtsp-timeout=<integer>   RTSP session timeout (s)
          RTSP sessions will be closed after not receiving any RTSP request for
          this long. Setting it to a negative value or zero disables timeouts.
          The default is 60 (one minute).
      --sout-rtsp-user=<string>  Username
          Username that will be requested to access the stream.
      --sout-rtsp-pwd=<string>   Password
          Password that will be requested to access the stream.

 Record stream output (record)
      --sout-record-dst-prefix=<string> 
                                 Destination prefix
          Prefix of the destination file automatically generated

 Mosaic bridge stream output (mosaic_bridge)
      --sout-mosaic-bridge-id=<string> 
                                 ID
          Specify an identifier string for this subpicture
      --sout-mosaic-bridge-width=<integer> 
                                 Video width
          Output video width.
      --sout-mosaic-bridge-height=<integer> 
                                 Video height
          Output video height.
      --sout-mosaic-bridge-sar=<string> 
                                 Sample aspect ratio
          Sample aspect ratio of the destination (1:1, 3:4, 2:3).
      --sout-mosaic-bridge-chroma=<string> 
                                 Image chroma
          Force the use of a specific chroma. Use YUVA if you're planning to
          use the Alphamask or Bluescreen video filter.
      --sout-mosaic-bridge-vfilter=<string> 
                                 Video filter
          Video filters will be applied to the video stream.
      --sout-mosaic-bridge-alpha=<integer [0 .. 255]> 
                                 Transparency
          Transparency of the mosaic picture.
      --sout-mosaic-bridge-x=<integer> 
                                 X offset
          X coordinate of the upper left corner in the mosaic if non negative.
      --sout-mosaic-bridge-y=<integer> 
                                 Y offset
          Y coordinate of the upper left corner in the mosaic if non negative.

 Elementary stream output (es)
   Generic:
      --sout-es-access=<string>  Output access method
          This is the default output access method that will be used.
      --sout-es-mux=<string>     Output muxer
          This is the default muxer method that will be used.
      --sout-es-dst=<string>     Output URL
          This is the default output URI.
   Audio:
      --sout-es-access-audio=<string> 
                                 Audio output access method
          This is the output access method that will be used for audio.
      --sout-es-mux-audio=<string> 
                                 Audio output muxer
          This is the muxer that will be used for audio.
      --sout-es-dst-audio=<string> 
                                 Audio output URL
          This is the output URI that will be used for audio.
   Video:
      --sout-es-access-video=<string> 
                                 Video output access method
          This is the output access method that will be used for video.
      --sout-es-mux-video=<string> 
                                 Video output muxer
          This is the muxer that will be used for video.
      --sout-es-dst-video=<string> 
                                 Video output URL
          This is the output URI that will be used for video.

 Display stream output (display)
      --sout-display-audio, --no-sout-display-audio 
                                 Enable audio
                                 (default enabled)
          Enable/disable audio rendering.
      --sout-display-video, --no-sout-display-video 
                                 Enable video
                                 (default enabled)
          Enable/disable video rendering.
      --sout-display-delay=<integer> 
                                 Delay (ms)
          Introduces a delay in the display of the stream.

 Delay a stream (delay)
      --sout-delay-id=<integer>  Elementary Stream ID
          Specify an identifier integer for this elementary stream
      --sout-delay-delay=<integer> 
                                 Delay of the ES (ms)
          Specify a delay (in ms) for this elementary stream. Positive means
          delay and negative means advance.

 Chromecast stream output (stream_out_chromecast)
      --sout-chromecast-ip=<string> 
                                 
      --sout-chromecast-port=<integer> 
                                 
      --sout-chromecast-video, --no-sout-chromecast-video 
                                 
                                 (default enabled)
      --sout-chromecast-http-port=<integer> 
                                 HTTP port
          This sets the HTTP port of the local server used to stream the media
          to the Chromecast.
      --sout-chromecast-show-perf-warning=<integer> 
                                 Performance warning
          Display a performance warning when transcoding
      --sout-chromecast-audio-passthrough, --no-sout-chromecast-audio-passthrough 
                                 Enable Audio passthrough
                                 (default disabled)
          Disable if your receiver does not support Dolby®.
      --sout-chromecast-conversion-quality={0 (High (high quality and high bandwidth)), 1 (Medium (medium quality and medium bandwidth)), 2 (Low (low quality and low bandwidth)), 3 (Low CPU (low quality but high bandwidth))} 
                                 Conversion quality
          Change this option to increase conversion speed or quality.

 Chromaprint stream output (stream_out_chromaprint)
      --duration=<integer>       Duration of the fingerprinting
          Default: 90sec

 Bridge stream output (bridge)
   Bridge out:
      --sout-bridge-out-id=<integer> 
                                 ID
          Integer identifier for this elementary stream. This will be used to
          "find" this stream later.
      --sout-bridge-out-in-name=<string> 
                                 Destination bridge-in name
          Name of the destination bridge-in. If you do not need more than one
          bridge-in at a time, you can discard this option.
   Bridge in:
      --sout-bridge-in-delay=<integer> 
                                 Delay
          Pictures coming from the picture video outputs will be delayed
          according to this value (in milliseconds, should be >= 100 ms). For
          high values, you will need to raise caching values.
      --sout-bridge-in-id-offset=<integer> 
                                 ID Offset
          Offset to add to the stream IDs specified in bridge_out to obtain the
          stream IDs bridge_in will register.
      --sout-bridge-in-name=<string> 
                                 Name of current instance
          Name of this bridge-in instance. If you do not need more than one
          bridge-in at a time, you can discard this option.
      --sout-bridge-in-placeholder, --no-sout-bridge-in-placeholder 
                                 Fallback to placeholder stream when out of
                                 data
                                 (default disabled)
          If set to true, the bridge will discard all input elementary streams
          except if it doesn't receive data from another bridge-in. This can be
          used to configure a place holder stream when the real source breaks.
          Source and placeholder streams should have the same format.
      --sout-bridge-in-placeholder-delay=<integer> 
                                 Placeholder delay
          Delay (in ms) before the placeholder kicks in.
      --sout-bridge-in-placeholder-switch-on-iframe, --no-sout-bridge-in-placeholder-switch-on-iframe 
                                 Wait for I frame before toggling placeholder
                                 (default enabled)
          If enabled, switching between the placeholder and the normal stream
          will only occur on I frames. This will remove artifacts on stream
          switching at the expense of a slightly longer delay, depending on the
          frequence of I frames in the streams.

 Stream prefetch filter (prefetch)
      --prefetch-buffer-size=<integer [4 .. 1048576]> 
                                 Buffer size
          Prefetch buffer size (KiB)
      --prefetch-read-size=<integer [1 .. 536870912]> 
                                 Read size
          Prefetch background read size (bytes)
      --prefetch-seek-threshold=<integer [0 .. 1152921504606846976]> 
                                 Seek threshold
          Prefetch forward seek threshold (bytes)

 Subtitle delay (subsdelay)
 Change subtitle delay
      --subsdelay-mode={0 (Absolute delay), 1 (Relative to source delay), 2 (Relative to source content)} 
                                 Delay calculation mode
          Absolute delay - add absolute delay to each subtitle. Relative to
          source delay - multiply subtitle delay. Relative to source content -
          determine subtitle delay from its content (text).
      --subsdelay-factor=<float [0.000000 .. 20.000000]> 
                                 Calculation factor
          Calculation factor. In Absolute delay mode the factor represents
          seconds.
      --subsdelay-overlap=<integer [1 .. 4]> 
                                 Maximum overlapping subtitles
          Maximum number of subtitles allowed at the same time.
      --subsdelay-min-alpha=<integer [0 .. 255]> 
                                 Minimum alpha value
          Alpha value of the earliest subtitle, where 0 is fully transparent
          and 255 is fully opaque.
   Overlap fix:
      --subsdelay-min-stops=<integer> 
                                 Interval between two disappearances
          Minimum time (in milliseconds) that subtitle should stay after its
          predecessor has disappeared (subtitle delay will be extended to meet
          this requirement).
      --subsdelay-min-start-stop=<integer> 
                                 Interval between appearance and disappearance
          Minimum time (in milliseconds) that subtitle should stay after newer
          subtitle has appeared (earlier subtitle delay will be shortened to
          avoid the overlap).
      --subsdelay-min-stop-start=<integer> 
                                 Interval between disappearance and appearance
          Minimum time (in milliseconds) between subtitle disappearance and
          newer subtitle appearance (earlier subtitle delay will be extended to
          fill the gap).

 RSS and Atom feed display (rss)
 Display a RSS or ATOM Feed on your video
      --rss-urls=<string>        Feed URLs
          RSS/Atom feed '|' (pipe) separated URLs.
   Position:
      --rss-x=<integer>          X offset
          X offset, from the left screen edge.
      --rss-y=<integer>          Y offset
          Y offset, down from the top.
      --rss-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Text position
          You can enforce the text position on the video (0=center, 1=left,
          2=right, 4=top, 8=bottom; you can also use combinations of these
          values, eg 6 = top-right).
   Font:
      --rss-opacity=<integer [0 .. 255]> 
                                 Opacity
          Opacity (inverse of transparency) of overlay text. 0 = transparent,
          255 = totally opaque.
      --rss-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Color
          Color of the text that will be rendered on the video. This must be an
          hexadecimal (like HTML colors). The first two chars are for red, then
          green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
          #FFFF00 = yellow (red + green), #FFFFFF = white
      --rss-size=<integer [0 .. 4096]> 
                                 Font size, pixels
          Font size, in pixels. Default is 0 (use default font size).
   Misc:
      --rss-speed=<integer>      Speed of feeds
          Speed of the RSS/Atom feeds in microseconds (bigger is slower).
      --rss-length=<integer>     Max length
          Maximum number of characters displayed on the screen.
      --rss-ttl=<integer>        Refresh time
          Number of seconds between each forced refresh of the feeds. 0 means
          that the feeds are never updated.
      --rss-images, --no-rss-images 
                                 Feed images
                                 (default enabled)
          Display feed images if available.
      --rss-title={-1 (Default), 0 (Don't show), 1 (Always visible), 2 (Scroll with feed)} 
                                 Title display mode
          Title display mode. Default is 0 (hidden) if the feed has an image
          and feed images are enabled, 1 otherwise.

 Remote-OSD over VNC (remoteosd)
      --rmtosd-host=<string>     VNC Host
          VNC hostname or IP address.
      --rmtosd-port=<integer [1 .. 65535]> 
                                 VNC Port
          VNC port number.
      --rmtosd-password=<string> VNC Password
          VNC password.
      --rmtosd-update=<integer [200 .. 300]> 
                                 VNC poll interval
          In this interval an update from VNC is requested, default every 300
          ms.
      --rmtosd-vnc-polling, --no-rmtosd-vnc-polling 
                                 VNC polling
                                 (default disabled)
          Activate VNC polling. Do NOT activate for use as VDR ffnetdev client.
      --rmtosd-mouse-events, --no-rmtosd-mouse-events 
                                 Mouse events
                                 (default disabled)
          Send mouse events to VNC host. Not needed for use as VDR ffnetdev
          client.
      --rmtosd-key-events, --no-rmtosd-key-events 
                                 Key events
                                 (default disabled)
          Send key events to VNC host.
      --rmtosd-alpha=<integer [0 .. 255]> 
                                 Alpha transparency value (default 255)
          The transparency of the OSD VNC can be changed by giving a value
          between 0 and 255. A lower value specifies more transparency a higher
          means less transparency. The default is being not transparent (value
          255) the minimum is fully transparent (value 0).

 Mosaic video sub source (mosaic)
      --mosaic-alpha=<integer [0 .. 255]> 
                                 Transparency
          Transparency of the mosaic foreground pictures. 0 means transparent,
          255 opaque (default).
      --mosaic-height=<integer>  Height
          Total height of the mosaic, in pixels.
      --mosaic-width=<integer>   Width
          Total width of the mosaic, in pixels.
      --mosaic-align={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Mosaic alignment
          You can enforce the mosaic alignment on the video (0=center, 1=left,
          2=right, 4=top, 8=bottom, you can also use combinations of these
          values, eg 6 = top-right).
      --mosaic-xoffset=<integer> Top left corner X coordinate
          X Coordinate of the top-left corner of the mosaic.
      --mosaic-yoffset=<integer> Top left corner Y coordinate
          Y Coordinate of the top-left corner of the mosaic.
      --mosaic-borderw=<integer> Border width
          Width in pixels of the border between miniatures.
      --mosaic-borderh=<integer> Border height
          Height in pixels of the border between miniatures.
      --mosaic-position={0 (auto), 1 (fixed), 2 (offsets)} 
                                 Positioning method
          Positioning method for the mosaic. auto: automatically choose the
          best number of rows and columns. fixed: use the user-defined number
          of rows and columns. offsets: use the user-defined offsets for each
          image.
      --mosaic-rows=<integer>    Number of rows
          Number of image rows in the mosaic (only used if positioning method
          is set to "fixed").
      --mosaic-cols=<integer>    Number of columns
          Number of image columns in the mosaic (only used if positioning
          method is set to "fixed").
      --mosaic-keep-aspect-ratio, --no-mosaic-keep-aspect-ratio 
                                 Keep aspect ratio
                                 (default disabled)
          Keep the original aspect ratio when resizing mosaic elements.
      --mosaic-keep-picture, --no-mosaic-keep-picture 
                                 Keep original size
                                 (default disabled)
          Keep the original size of mosaic elements.
      --mosaic-order=<string>    Elements order
          You can enforce the order of the elements on the mosaic. You must
          give a comma-separated list of picture ID(s). These IDs are assigned
          in the "mosaic-bridge" module.
      --mosaic-offsets=<string>  Offsets in order
          You can enforce the (x,y) offsets of the elements on the mosaic (only
          used if positioning method is set to "offsets"). You must give a
          comma-separated list of coordinates (eg: 10,10,150,10).
      --mosaic-delay=<integer>   Delay
          Pictures coming from the mosaic elements will be delayed according to
          this value (in milliseconds). For high values you will need to raise
          caching at input.

 Marquee display (marq)
 Display text above the video
      --marq-marquee=<string>    Text
          Marquee text to display. (Available format strings: %Y = year, %m =
          month, %d = day, %H = hour, %M = minute, %S = second, ...)
      --marq-file=<string>       Text file
          File to read the marquee text from.
   Position:
      --marq-x=<integer>         X offset
          X offset, from the left screen edge.
      --marq-y=<integer>         Y offset
          Y offset, down from the top.
      --marq-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Marquee position
          You can enforce the marquee position on the video (0=center, 1=left,
          2=right, 4=top, 8=bottom, you can also use combinations of these
          values, eg 6 = top-right).
   Font:
      --marq-opacity=<integer [0 .. 255]> 
                                 Opacity
          Opacity (inverse of transparency) of overlayed text. 0 = transparent,
          255 = totally opaque.
      --marq-color={-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)} 
                                 Color
          Color of the text that will be rendered on the video. This must be an
          hexadecimal (like HTML colors). The first two chars are for red, then
          green, then blue. #000000 = black, #FF0000 = red, #00FF00 = green,
          #FFFF00 = yellow (red + green), #FFFFFF = white
      --marq-size=<integer [0 .. 4096]> 
                                 Font size, pixels
          Font size, in pixels. Default is 0 (use default font size).
   Misc:
      --marq-timeout=<integer>   Timeout
          Number of milliseconds the marquee must remain displayed. Default
          value is 0 (remains forever).
      --marq-refresh=<integer>   Refresh period in ms
          Number of milliseconds between string updates. This is mainly useful
          when using meta data or time format string sequences.

 Logo sub source (logo)
 Use a local picture as logo on the video
      --logo-file=<string>       Logo filenames
          Full path of the image files to use. Format is <image>[,<delay in
          ms>[,<alpha>]][;<image>[,<delay>[,<alpha>]]][;...]. If you only have
          one file, simply enter its filename.
      --logo-x=<integer>         X coordinate
          X coordinate of the logo. You can move the logo by left-clicking it.
      --logo-y=<integer>         Y coordinate
          Y coordinate of the logo. You can move the logo by left-clicking it.
      --logo-delay=<integer>     Logo individual image time in ms
          Individual image display time of 0 - 60000 ms.
      --logo-repeat=<integer>    Logo animation # of loops
          Number of loops for the logo animation. -1 = continuous, 0 = disabled
      --logo-opacity=<integer [0 .. 255]> 
                                 Opacity of the logo
          Logo opacity value (from 0 for full transparency to 255 for full
          opacity).
      --logo-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Logo position
          Enforce the logo position on the video (0=center, 1=left, 2=right,
          4=top, 8=bottom, you can also use combinations of these values, eg 6
          = top-right).

 Audio Bar Graph Video sub source (audiobargraph_v)
      --audiobargraph_v-x=<integer> 
                                 X coordinate
          X coordinate of the bargraph.
      --audiobargraph_v-y=<integer> 
                                 Y coordinate
          Y coordinate of the bargraph.
      --audiobargraph_v-transparency=<integer [0 .. 255]> 
                                 Transparency of the bargraph
          Bargraph transparency value (from 0 for full transparency to 255 for
          full opacity).
      --audiobargraph_v-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Bargraph position
          Enforce the bargraph position on the video (0=center, 1=left,
          2=right, 4=top, 8=bottom, you can also use combinations of these
          values, eg 6 = top-right).
      --audiobargraph_v-barWidth=<integer> 
                                 Bar width in pixel
          Width in pixel of each bar in the BarGraph to be displayed.
      --audiobargraph_v-barHeight=<integer> 
                                 Bar Height in pixel
          Height in pixel of BarGraph to be displayed.

 Universal Plug'n'Play (upnp)
      --satip-channelist={ASTRA_19_2E,ASTRA_28_2E,ASTRA_23_5E,MasterList,ServerList,CustomList} 
                                 SAT>IP channel list
          SAT>IP channel list
      --satip-channellist-url=<string> 
                                 Custom SAT>IP channel list URL
          Custom SAT>IP channel list URL

 Network streams (SAP) (sap)
      --sap-addr=<string>        SAP multicast address
          The SAP module normally chooses itself the right addresses to listen
          to. However, you can specify a specific address.
      --sap-timeout=<integer>    SAP timeout (seconds)
          Delay after which SAP items get deleted if no new announcement is
          received.
      --sap-parse, --no-sap-parse 
                                 Try to parse the announce
                                 (default enabled)
          This enables actual parsing of the announces by the SAP module.
          Otherwise, all announcements are parsed by the "live555" (RTP/RTSP)
          module.
      --sap-strict, --no-sap-strict 
                                 SAP Strict mode
                                 (default disabled)
          When this is set, the SAP parser will discard some non-compliant
          announcements.

 Podcasts (podcast)
      --podcast-urls=<string>    Podcast URLs list
          Enter the list of podcasts to retrieve, separated by '|' (pipe).

 MPEG-I/II video packetizer (mpegvideo)
      --packetizer-mpegvideo-sync-iframe, --no-packetizer-mpegvideo-sync-iframe 
                                 Sync on Intra Frame
                                 (default disabled)
          Normally the packetizer would sync on the next full frame. This flags
          instructs the packetizer to sync on the first Intra Frame found.

 TS muxer (libdvbpsi) (mux_ts)
      --sout-ts-standard={dvb,atsc} 
                                 Digital TV Standard
      --sout-ts-pid-video=<integer [32 .. 8190]> 
                                 Video PID
          Assign a fixed PID to the video stream. The PCR PID will
          automatically be the video.
      --sout-ts-pid-audio=<integer [32 .. 8190]> 
                                 Audio PID
          Assign a fixed PID to the audio stream.
      --sout-ts-pid-spu=<integer [32 .. 8190]> 
                                 SPU PID
          Assign a fixed PID to the SPU.
      --sout-ts-pid-pmt=<integer [32 .. 8190]> 
                                 PMT PID
          Assign a fixed PID to the PMT
      --sout-ts-tsid=<integer>   TS ID
          Assign a fixed Transport Stream ID.
      --sout-ts-netid=<integer>  NET ID
          Assign a fixed Network ID (for SDT table)
      --sout-ts-program-pmt=<string> 
                                 PMT Program numbers
          Assign a program number to each PMT. This requires "Set PID to ID of
          ES" to be enabled.
      --sout-ts-es-id-pid, --no-sout-ts-es-id-pid 
                                 Set PID to ID of ES
                                 (default disabled)
          Sets PID to the ID if the incoming ES. This is for use with
          --ts-es-id-pid, and allows having the same PIDs in the input and
          output streams.
      --sout-ts-muxpmt=<string>  Mux PMT (requires --sout-ts-es-id-pid)
          Define the pids to add to each pmt. This requires "Set PID to ID of
          ES" to be enabled.
      --sout-ts-sdtdesc=<string> SDT Descriptors (requires --sout-ts-es-id-pid)
          Defines the descriptors of each SDT. This requires "Set PID to ID of
          ES" to be enabled.
      --sout-ts-alignment, --no-sout-ts-alignment 
                                 Data alignment
                                 (default enabled)
          Enforces alignment of all access units on PES boundaries. Disabling
          this might save some bandwidth but introduce incompatibilities.
      --sout-ts-shaping=<integer> 
                                 Shaping delay (ms)
          Cut the stream in slices of the given duration, and ensure a constant
          bitrate between the two boundaries. This avoids having huge bitrate
          peaks, especially for reference frames.
      --sout-ts-use-key-frames, --no-sout-ts-use-key-frames 
                                 Use keyframes
                                 (default disabled)
          If enabled, and shaping is specified, the TS muxer will place the
          boundaries at the end of I pictures. In that case, the shaping
          duration given by the user is a worse case used when no reference
          frame is available. This enhances the efficiency of the shaping
          algorithm, since I frames are usually the biggest frames in the
          stream.
      --sout-ts-pcr=<integer>    PCR interval (ms)
          Set at which interval PCRs (Program Clock Reference) will be sent (in
          milliseconds). This value should be below 100ms. (default is 70ms).
      --sout-ts-bmin=<integer>   Minimum B (deprecated)
          This setting is deprecated and not used anymore
      --sout-ts-bmax=<integer>   Maximum B (deprecated)
          This setting is deprecated and not used anymore
      --sout-ts-dts-delay=<integer> 
                                 DTS delay (ms)
          Delay the DTS (decoding time stamps) and PTS (presentation
          timestamps) of the data in the stream, compared to the PCRs. This
          allows for some buffering inside the client decoder.
      --sout-ts-crypt-audio, --no-sout-ts-crypt-audio 
                                 Crypt audio
                                 (default enabled)
          Crypt audio using CSA
      --sout-ts-crypt-video, --no-sout-ts-crypt-video 
                                 Crypt video
                                 (default enabled)
          Crypt video using CSA
      --sout-ts-csa-ck=<string>  CSA Key
          CSA encryption key. This must be a 16 char string (8 hexadecimal
          bytes).
      --sout-ts-csa2-ck=<string> Second CSA Key
          The even CSA encryption key. This must be a 16 char string (8
          hexadecimal bytes).
      --sout-ts-csa-use=<string> CSA Key in use
          CSA encryption key used. It can be the odd/first/1 (default) or the
          even/second/2 one.
      --sout-ts-csa-pkt=<integer> 
                                 Packet size in bytes to encrypt
          Size of the TS packet to encrypt. The encryption routines subtract
          the TS-header from the value before encrypting.

 PS muxer (ps)
      --sout-ps-dts-delay=<integer> 
                                 DTS delay (ms)
          Delay the DTS (decoding time stamps) and PTS (presentation
          timestamps) of the data in the stream, compared to the SCRs. This
          allows for some buffering inside the client decoder.
      --sout-ps-pes-max-size=<integer> 
                                 PES maximum size
          Set the maximum allowed PES size when producing the MPEG PS streams.

 Ogg/OGM muxer (mux_ogg)
      --sout-ogg-indexintvl=<integer [0 .. 2147483647]> 
                                 Index interval
          Minimal index interval, in microseconds. Set to 0 to disable index
          creation.
      --sout-ogg-indexratio=<float [1.000000 .. 1000.000000]> 
                                 Index size ratio
          Set index size ratio. Alters default (60min content) or estimated
          size.

 MP4/MOV muxer (mp4)
      --sout-mp4-faststart, --no-sout-mp4-faststart 
                                 Create "Fast Start" files
                                 (default enabled)
          Create "Fast Start" files. "Fast Start" files are optimized for
          downloads and allow the user to start previewing the file while it is
          downloading.

 AVI muxer (avi)
      --sout-avi-artist=<string> Artist
      --sout-avi-date=<string>   Date
      --sout-avi-genre=<string>  Genre
      --sout-avi-copyright=<string> 
                                 Copyright
      --sout-avi-comment=<string> 
                                 Comment
      --sout-avi-name=<string>   Name
      --sout-avi-subject=<string> 
                                 Subject
      --sout-avi-encoder=<string> 
                                 Encoder
      --sout-avi-keywords=<string> 
                                 Keywords

 ASF muxer (asf)
      --sout-asf-title=<string>  Title
          Title to put in ASF comments.
      --sout-asf-author=<string> Author
          Author to put in ASF comments.
      --sout-asf-copyright=<string> 
                                 Copyright
          Copyright string to put in ASF comments.
      --sout-asf-comment=<string> 
                                 Comment
          Comment to put in ASF comments.
      --sout-asf-rating=<string> Rating
          "Rating" to put in ASF comments.
      --sout-asf-packet-size=<integer> 
                                 Packet Size
          ASF packet size -- default is 4096 bytes
      --sout-asf-bitrate-override=<integer> 
                                 Bitrate override
          Do not try to guess ASF bitrate. Setting this, allows you to control
          how Windows Media Player will cache streamed content. Set to
          audio+video bitrate in bytes

 Legacy RTSP VoD server (rtsp)
      --rtsp-raw-mux=<string>    MUX for RAW RTSP transport
          MUX for RAW RTSP transport
      --rtsp-throttle-users=<integer> 
                                 Maximum number of connections
          This limits the maximum number of clients that can connect to the
          RTSP VOD. 0 means no limit.
      --rtsp-session-timeout=<integer> 
                                 Sets the timeout option in the RTSP session
                                 string
          Defines what timeout option to add to the RTSP session ID string.
          Setting it to a negative number removes the timeout option entirely.
          This is needed by some IPTV STBs (such as those made by HansunTech)
          which get confused by it. The default is 5.

 GNU TLS transport layer security (gnutls)
      --gnutls-system-trust, --no-gnutls-system-trust 
                                 Use system trust database
                                 (default enabled)
          Trust the root certificates of Certificate Authorities stored in the
          operating system trust database to authenticate TLS sessions.
      --gnutls-dir-trust=<string> 
                                 Trust directory
          Trust directory
      --gnutls-priorities={PERFORMANCE,NORMAL,SECURE128,SECURE256,EXPORT} 
                                 TLS cipher priorities
          Ciphers, key exchange methods, hash functions and compression methods
          can be selected. Refer to GNU TLS documentation for detailed syntax.

 Submission of played songs to last.fm (audioscrobbler)
      --lastfm-username=<string> Username
          The username of your last.fm account
      --lastfm-password=<string> Password
          The password of your last.fm account
      --scrobbler-url=<string>   Scrobbler URL
          The URL set for an alternative scrobbler engine

 Folder meta data (folder)
      --album-art-filename=<string> 
                                 Album art filename
          Filename to look for album art in current directory

 Lua interpreter (lua)
      --lua-intf=<string>        Lua interface
          Lua interface module to load
      --lua-config=<string>      Lua interface configuration
          Lua interface configuration string. Format is: '["<interface module
          name>"] = { <option> = <value>, ...}, ...'.
   Lua HTTP:
      --http-password=<string>   Password
          A single password restricts access to this interface.
      --http-src=<string>        Source directory
          Source directory
      --http-index, --no-http-index 
                                 Directory index
                                 (default disabled)
          Allow to build directory index
   Lua CLI:
      --rc-host=<string>         TCP command input
          Accept commands over a socket rather than stdin. You can set the
          address and port the interface will bind to.
      --cli-host=<string>        CLI input
          Accept commands from this source. The CLI defaults to stdin
          ("*console"), but can also bind to a plain TCP socket
          ("localhost:4212") or use the telnet protocol
          ("telnet://0.0.0.0:4212")
   Lua Telnet:
      --telnet-host=<string>     Host
          This is the host on which the interface will listen. It defaults to
          all network interfaces (0.0.0.0). If you want this interface to be
          available only on the local machine, enter "127.0.0.1".
      --telnet-port=<integer [1 .. 65535]> 
                                 Port
          This is the TCP port on which this interface will listen. It defaults
          to 4212.
      --telnet-password=<string> Password
          A single password restricts access to this interface.
      --lua-sd=<string>          

 File logger (file)
      --file-logging, --no-file-logging 
                                 Log to file
                                 (default disabled)
          Log all VLC messages to a text file.
      --logfile=<string>         Log filename
          Specify the log filename.
      --logmode={text,html}      Log format
          Specify the logging format.
      --log-verbose={-1 (Default), 0 (Info), 1 (Error), 2 (Warning), 3 (Debug)} 
                                 Verbosity
          Select the logging verbosity or default to use the same verbosity
          given by --verbose.

 Console logger (console)
  -q, --quiet, --no-quiet        Be quiet
                                 (default disabled)
          Turn off all messages on the console.

 Secrets are stored on a file without any encryption (file)
      --keystore-file=<string>   

 Skinnable Interface (skins2)
      --skins2-last=<string>     Skin to use
          Path to the skin to use.
      --skins2-config=<string>   Config of last used skin
          Windows configuration of the last skin used. This option is updated
          automatically, do not touch it.
      --skins2-systray, --no-skins2-systray 
                                 Systray icon
                                 (default enabled)
          Show a systray icon for VLC
      --skins2-taskbar, --no-skins2-taskbar 
                                 Show VLC on the taskbar
                                 (default enabled)
          Show VLC on the taskbar
      --skins2-transparency, --no-skins2-transparency 
                                 Enable transparency effects
                                 (default disabled)
          You can disable all transparency effects if you want. This is mainly
          useful when moving windows does not behave correctly.
      --skinned-playlist, --no-skinned-playlist 
                                 Use a skinned playlist
                                 (default enabled)
          Use a skinned playlist
      --skinned-video, --no-skinned-video 
                                 Display video in a skinned window if any
                                 (default enabled)
          When set to 'no', this parameter is intended to give old skins a
          chance to play back video even though no video tag is implemented

 Qt interface (qt)
      --qt-minimal-view, --no-qt-minimal-view 
                                 Start in minimal view (without menus)
                                 (default disabled)
          Start in minimal view (without menus)
      --qt-system-tray, --no-qt-system-tray 
                                 Systray icon
                                 (default enabled)
          Show an icon in the systray allowing you to control VLC media player
          for basic actions.
      --qt-notification={0 (Never), 1 (When minimized), 2 (Always)} 
                                 Show notification popup on track change
          Show a notification popup with the artist and track name when the
          current playlist item changes, when VLC is minimized or hidden.
      --qt-start-minimized, --no-qt-start-minimized 
                                 Start VLC with only a systray icon
                                 (default disabled)
          VLC will start with just an icon in your taskbar.
      --qt-pause-minimized, --no-qt-pause-minimized 
                                 Pause the video playback when minimized
                                 (default disabled)
          With this option enabled, the playback will be automatically paused
          when minimizing the window.
      --qt-opacity=<float [0.100000 .. 1.000000]> 
                                 Windows opacity between 0.1 and 1
          Sets the windows opacity between 0.1 and 1 for main interface,
          playlist and extended panel. This option only works with Windows and
          X11 with composite extensions.
      --qt-fs-opacity=<float [0.100000 .. 1.000000]> 
                                 Fullscreen controller opacity between 0.1 and
                                 1
          Sets the fullscreen controller opacity between 0.1 and 1 for main
          interface, playlist and extended panel. This option only works with
          Windows and X11 with composite extensions.
      --qt-video-autoresize, --no-qt-video-autoresize 
                                 Resize interface to the native video size
                                 (default enabled)
          You have two choices:  - The interface will resize to the native
          video size  - The video will fit to the interface size  By default,
          interface resize to the native video size.
      --qt-name-in-title, --no-qt-name-in-title 
                                 Show playing item name in window title
                                 (default enabled)
          Show the name of the song or video in the controller window title.
      --qt-fs-controller, --no-qt-fs-controller 
                                 Show a controller in fullscreen mode
                                 (default enabled)
          Show a controller in fullscreen mode
      --qt-recentplay, --no-qt-recentplay 
                                 Save the recently played items in the menu
                                 (default enabled)
          Save the recently played items in the menu
      --qt-recentplay-filter=<string> 
                                 List of words separated by | to filter
          Regular expression used to filter the recent items played in the
          player.
      --qt-continue={0 (Never), 1 (Ask), 2 (Always)} 
                                 Continue playback?
          Continue playback?
      --qt-updates-notif, --no-qt-updates-notif 
                                 Activate the updates availability notification
                                 (default enabled)
          Activate the automatic notification of new versions of the software.
          It runs once every two weeks.
      --qt-updates-days=<integer [0 .. 180]> 
                                 Number of days between two update checks
          Number of days between two update checks
      --qt-disable-volume-keys, --no-qt-disable-volume-keys 
                                 Ignore keyboard volume buttons.
                                 (default enabled)
          With this option checked, the volume up, volume down and mute buttons
          on your keyboard will always change your system volume. With this
          option unchecked, the volume buttons will change VLC's volume when
          VLC is selected and change the system volume when VLC is not
          selected.
      --qt-embedded-open, --no-qt-embedded-open 
                                 Embed the file browser in open dialog
                                 (default disabled)
          Embed the file browser in open dialog
      --qt-advanced-pref, --no-qt-advanced-pref 
                                 Show advanced preferences over simple ones
                                 (default disabled)
          Show advanced preferences and not simple preferences when opening the
          preferences dialog.
      --qt-error-dialogs, --no-qt-error-dialogs 
                                 Show unimportant error and warnings dialogs
                                 (default enabled)
          Show unimportant error and warnings dialogs
      --qt-slider-colours=<string> 
                                 Define the colors of the volume slider
          Define the colors of the volume slider By specifying the 12 numbers
          separated by a ';' Default is
          '255;255;255;20;226;20;255;176;15;235;30;20' An alternative can be
          '30;30;50;40;40;100;50;50;160;150;150;255'
      --qt-privacy-ask, --no-qt-privacy-ask 
                                 Ask for network policy at start
                                 (default disabled)
          Ask for network policy at start
      --qt-fullscreen-screennumber=<integer> 
                                 Define which screen fullscreen goes
          Screennumber of fullscreen, instead of same screen where interface
          is.
      --qt-autoload-extensions, --no-qt-autoload-extensions 
                                 Load extensions on startup
                                 (default enabled)
          Automatically load the extensions module on startup.
      --qt-bgcone, --no-qt-bgcone 
                                 Display background cone or art
                                 (default enabled)
          Display background cone or current album art when not playing. Can be
          disabled to prevent burning screen.
      --qt-bgcone-expands, --no-qt-bgcone-expands 
                                 Expanding background cone or art
                                 (default disabled)
          Background art fits window's size.
      --qt-icon-change, --no-qt-icon-change 
                                 Allow automatic icon changes
                                 (default enabled)
          This option allows the interface to change its icon on various
          occasions.
      --qt-max-volume=<integer [60 .. 300]> 
                                 Maximum Volume displayed
          Maximum Volume displayed
      --qt-fs-sensitivity=<integer [0 .. 4000]> 
                                 Fullscreen controller mouse sensitivity
          Fullscreen controller mouse sensitivity
      --qt-auto-raise={0 (Never), 1 (Video), 2 (Audio), 3 (Audio/Video)} 
                                 When to raise the interface
          This option allows the interface to be raised automatically when a
          video/audio playback starts, or never.

 VC1 video demuxer (vc1)
      --vc1-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          Desired frame rate for the VC-1 stream.

 MPEG Transport Stream demuxer (ts)
      --ts-standard={auto,mpeg,dvb,arib,atsc,tdmb} 
                                 Digital TV Standard
          Selects mode for digital TV standard. This feature affects EPG
          information and subtitles.
      --ts-extra-pmt=<string>    Extra PMT
          Allows a user to specify an extra pmt
          (pmt_pid=pid:stream_type[,...]).
      --ts-trust-pcr, --no-ts-trust-pcr 
                                 Trust in-stream PCR
                                 (default enabled)
          Use the stream PCR as a reference.
      --ts-es-id-pid, --no-ts-es-id-pid 
                                 Set id of ES to PID
                                 (default enabled)
          Set the internal ID of each elementary stream handled by VLC to the
          same value as the PID in the TS stream, instead of 1, 2, 3, etc.
          Useful to do '#duplicate{..., select="es=<pid>"}'.
      --ts-csa-ck=<string>       CSA Key
          CSA encryption key. This must be a 16 char string (8 hexadecimal
          bytes).
      --ts-csa2-ck=<string>      Second CSA Key
          The even CSA encryption key. This must be a 16 char string (8
          hexadecimal bytes).
      --ts-csa-pkt=<integer>     Packet size in bytes to decrypt
          Specify the size of the TS packet to decrypt. The decryption routines
          subtract the TS-header from the value before decrypting.
      --ts-split-es, --no-ts-split-es 
                                 Separate sub-streams
                                 (default enabled)
          Separate teletex/dvbs pages into independent ES. It can be useful to
          turn off this option when using stream output.
      --ts-seek-percent, --no-ts-seek-percent 
                                 Seek based on percent not time
                                 (default disabled)
          Seek and position based on a percent byte position, not a PCR
          generated time position. If seeking doesn't work property, turn on
          this option.
      --ts-cc-check, --no-ts-cc-check 
                                 Check packets continuity counter
                                 (default enabled)
          Detect discontinuities and drop packet duplicates. (bluRay sources
          are known broken and have false positives). 

 Text subtitle parser (subtitle)
      --sub-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          Override the normal frames per second settings. This will only work
          with MicroDVD and SubRIP (SRT) subtitles.
      --sub-delay=<integer>      Subtitle delay
          Apply a delay to all subtitles (in 1/10s, eg 100 means 10s).
      --sub-type={auto,microdvd,subrip,subviewer,ssa1,ssa2-4,ass,vplayer,sami,dvdsubtitle,mpl2,aqt,pjs,mpsub,jacosub,psb,realtext,dks,subviewer1,sbv} 
                                 Subtitle format
          Force the subtiles format. Selecting "auto" means autodetection and
          should always work.
      --sub-description=<string> Subtitle description
          Override the default track description.

 Raw video demuxer (rawvid)
      --rawvid-fps=<string>      Frames per Second
          This is the desired frame rate when playing raw video streams. In the
          form 30000/1001 or 29.97
      --rawvid-width=<integer>   Width
          This specifies the width in pixels of the raw video stream.
      --rawvid-height=<integer>  Height
          This specifies the height in pixels of the raw video stream.
      --rawvid-chroma=<string>   Force chroma (Use carefully)
          Force chroma. This is a four character string.
      --rawvid-aspect-ratio=<string> 
                                 Aspect ratio
          Aspect ratio (4:3, 16:9). Default assumes square pixels.

 DV (Digital Video) demuxer (rawdv)
      --rawdv-hurry-up, --no-rawdv-hurry-up 
                                 Hurry up
                                 (default disabled)
          The demuxer will advance timestamps if the input can't keep up with
          the rate.

 Raw audio demuxer (rawaud)
      --rawaud-channels=<integer> 
                                 Audio channels
          Audio channels in input stream. Numeric value >0. Default is 2.
      --rawaud-samplerate=<integer> 
                                 Audio samplerate (Hz)
          Audio sample rate in Hertz. Default is 48000 Hz.
      --rawaud-fourcc=<string>   FOURCC code of raw input format
          FOURCC code of the raw input format. This is a four character string.
      --rawaud-lang=<string>     Forces the audio language
          Forces the audio language for the output mux. Three letter ISO639
          code. Default is 'eng'.

 MPEG-PS demuxer (ps)
      --ps-trust-timestamps, --no-ps-trust-timestamps 
                                 Trust MPEG timestamps
                                 (default enabled)
          Normally we use the timestamps of the MPEG files to calculate
          position and duration. However sometimes this might not be usable.
          Disable this option to calculate from the bitrate instead.

 Playlist (playlist)
      --playlist-skip-ads, --no-playlist-skip-ads 
                                 Skip ads
                                 (default enabled)
          Use playlist options usually used to prevent ads skipping to detect
          ads and prevent adding them to the playlist.
      --shoutcast-show-adult, --no-shoutcast-show-adult 
                                 Show shoutcast adult content
                                 (default disabled)
          Show NC17 rated video streams when using shoutcast video playlists.

 MP4 stream demuxer (mp4)

 Hacks
      --mp4-m4a-audioonly, --no-mp4-m4a-audioonly 
                                 M4A audio only
                                 (default disabled)
          Ignore non audio tracks from iTunes audio files

 MOD demuxer (libmodplug) (mod)
      --mod-noisereduction, --no-mod-noisereduction 
                                 Noise reduction
                                 (default enabled)
          Enable noise reduction algorithm.
      --mod-reverb, --no-mod-reverb 
                                 Reverb
                                 (default disabled)
          Enable reverberation
      --mod-reverb-level=<integer [0 .. 100]> 
                                 Reverberation level
          Reverberation level (from 0 to 100, default value is 0).
      --mod-reverb-delay=<integer [0 .. 1000]> 
                                 Reverberation delay
          Reverberation delay, in ms. Usual values are from 40 to 200ms.
      --mod-megabass, --no-mod-megabass 
                                 Mega bass
                                 (default disabled)
          Enable megabass mode
      --mod-megabass-level=<integer [0 .. 100]> 
                                 Mega bass level
          Megabass mode level (from 0 to 100, default value is 0).
      --mod-megabass-range=<integer [10 .. 100]> 
                                 Mega bass cutoff
          Megabass mode cutoff frequency, in Hz. This is the maximum frequency
          for which the megabass effect applies. Valid values are from 10 to
          100 Hz.
      --mod-surround, --no-mod-surround 
                                 Surround
                                 (default disabled)
          Surround
      --mod-surround-level=<integer [0 .. 100]> 
                                 Surround level
          Surround effect level (from 0 to 100, default value is 0).
      --mod-surround-delay=<integer [0 .. 1000]> 
                                 Surround delay (ms)
          Surround delay, in ms. Usual values are from 5 to 40 ms.

 Matroska stream demuxer (mkv)
      --mkv-use-ordered-chapters, --no-mkv-use-ordered-chapters 
                                 Respect ordered chapters
                                 (default enabled)
          Play chapters in the order specified in the segment.
      --mkv-use-chapter-codec, --no-mkv-use-chapter-codec 
                                 Chapter codecs
                                 (default enabled)
          Use chapter codecs found in the segment.
      --mkv-preload-local-dir, --no-mkv-preload-local-dir 
                                 Preload MKV files in the same directory
                                 (default enabled)
          Preload matroska files in the same directory to find linked segments
          (not good for broken files).
      --mkv-seek-percent, --no-mkv-seek-percent 
                                 Seek based on percent not time
                                 (default disabled)
          Seek based on percent not time.
      --mkv-use-dummy, --no-mkv-use-dummy 
                                 Dummy Elements
                                 (default disabled)
          Read and discard unknown EBML elements (not good for broken files).
      --mkv-preload-clusters, --no-mkv-preload-clusters 
                                 Preload clusters
                                 (default disabled)
          Find all cluster positions by jumping cluster-to-cluster before
          playback

 M-JPEG camera demuxer (mjpeg)
      --mjpeg-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          This is the desired frame rate when playing MJPEG from a file. Use 0
          (this is the default value) for a live stream (from a camera).

 Image demuxer (image)
      --image-id=<integer>       ES ID
          Set the ID of the elementary stream
      --image-group=<integer>    Group
          Set the group of the elementary stream
      --image-decode, --no-image-decode 
                                 Decode
                                 (default enabled)
          Decode at the demuxer stage
      --image-chroma=<string>    Forced chroma
          If non empty and image-decode is true, the image will be converted to
          the specified chroma.
      --image-duration=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Duration in seconds
          Duration in seconds before simulating an end of file. A negative
          value means an unlimited play time.
      --image-fps=<string>       Frame rate
          Frame rate of the elementary stream produced.
      --image-realtime, --no-image-realtime 
                                 Real-time
                                 (default disabled)
          Use real-time mode suitable for being used as a master input and
          real-time input slaves.

 H264 video demuxer (h26x)
      --h264-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          Desired frame rate for the stream.
      --hevc-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          Desired frame rate for the stream.

 MPEG-I/II/4 / A52 / DTS / MLP audio (es)
      --es-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frames per Second
          This is the frame rate used as a fallback when playing MPEG video
          elementary streams.

 File dumper (demuxdump)
      --demuxdump-access={any,file,dummy,ftp,http,access_output_livehttp,access_output_shout,udp,stream_out_chromecast,avcodec,none} 
                                 Dump module
          Dump module
      --demuxdump-file=<string>  Dump filename
          Name of the file to which the raw stream will be dumped.
      --demuxdump-append, --no-demuxdump-append 
                                 Append to existing file
                                 (default disabled)
          If the file already exists, it will not be overwritten.

 AVI demuxer (avi)
      --avi-interleaved, --no-avi-interleaved 
                                 Force interleaved method
                                 (default disabled)
          Force interleaved method
      --avi-index={0 (Ask for action), 1 (Always fix), 2 (Never fix), 3 (Fix when necessary)} 
                                 Force index creation
          Recreate a index for the AVI file. Use this if your AVI file is
          damaged or incomplete (not seekable).

 Unified adaptive streaming for DASH/HLS (adaptive)
      --adaptive-logic={,predictive,nearoptimal,rate,fixedrate,lowest,highest} 
                                 Adaptive Logic
      --adaptive-maxwidth=<integer> 
                                 Maximum device width
          Maximum device width
      --adaptive-maxheight=<integer> 
                                 Maximum device height
          Maximum device height
      --adaptive-bw=<integer>    Fixed Bandwidth in KiB/s
          Preferred bandwidth for non adaptive streams
      --adaptive-use-access, --no-adaptive-use-access 
                                 Use regular HTTP modules
                                 (default disabled)
          Connect using HTTP access instead of custom HTTP code

 Direct3D9 adjust filter (d3d9_filters)
      --contrast=<float [0.000000 .. 2.000000]> 
                                 Image contrast (0-2)
          Set the image contrast, between 0 and 2. Defaults to 1.
      --brightness=<float [0.000000 .. 2.000000]> 
                                 Image brightness (0-2)
          Set the image brightness, between 0 and 2. Defaults to 1.
      --hue=<float [-180.000000 .. 180.000000]> 
                                 Image hue (0-360)
          Set the image hue, between 0 and 360. Defaults to 0.
      --saturation=<float [0.000000 .. 3.000000]> 
                                 Image saturation (0-3)
          Set the image saturation, between 0 and 3. Defaults to 1.
      --gamma=<float [0.010000 .. 10.000000]> 
                                 Image gamma (0-10)
          Set the image gamma, between 0.01 and 10. Defaults to 1.
      --brightness-threshold, --no-brightness-threshold 
                                 Brightness threshold
                                 (default disabled)
          When this mode is enabled, pixels will be shown as black or white.
          The threshold value will be the brightness defined below.

 Direct3D11 adjust filter (d3d11_filters)
      --contrast=<float [0.000000 .. 2.000000]> 
                                 Image contrast (0-2)
          Set the image contrast, between 0 and 2. Defaults to 1.
      --brightness=<float [0.000000 .. 2.000000]> 
                                 Image brightness (0-2)
          Set the image brightness, between 0 and 2. Defaults to 1.
      --hue=<float [-180.000000 .. 180.000000]> 
                                 Image hue (0-360)
          Set the image hue, between 0 and 360. Defaults to 0.
      --saturation=<float [0.000000 .. 3.000000]> 
                                 Image saturation (0-3)
          Set the image saturation, between 0 and 3. Defaults to 1.
      --gamma=<float [0.010000 .. 10.000000]> 
                                 Image gamma (0-10)
          Set the image gamma, between 0.01 and 10. Defaults to 1.
      --brightness-threshold, --no-brightness-threshold 
                                 Brightness threshold
                                 (default disabled)
          When this mode is enabled, pixels will be shown as black or white.
          The threshold value will be the brightness defined below.

 Remote control interface (oldrc)
      --rc-show-pos, --no-rc-show-pos 
                                 Show stream position
                                 (default disabled)
          Show the current position in seconds within the stream from time to
          time.
      --rc-quiet, --no-rc-quiet  Do not open a DOS command box interface
                                 (default disabled)
          By default the rc interface plugin will start a DOS command box.
          Enabling the quiet mode will not bring this command box but can also
          be pretty annoying when you want to stop VLC and no video window is
          open.
      --rc-host=<string>         TCP command input
          Accept commands over a socket rather than stdin. You can set the
          address and port the interface will bind to.

 Windows Service interface (ntservice)
      --ntservice-install, --no-ntservice-install 
                                 Install Windows Service
                                 (default disabled)
          Install the Service and exit.
      --ntservice-uninstall, --no-ntservice-uninstall 
                                 Uninstall Windows Service
                                 (default disabled)
          Uninstall the Service and exit.
      --ntservice-name=<string>  Display name of the Service
          Change the display name of the Service.
      --ntservice-options=<string> 
                                 Configuration options
          Configuration options that will be used by the Service (eg. --foo=bar
          --no-foobar). It should be specified at install time so the Service
          is properly configured.
      --ntservice-extraintf=<string> 
                                 Extra interface modules
          Additional interfaces spawned by the Service. It should be specified
          at install time so the Service is properly configured. Use a comma
          separated list of interface modules. (common values are: logger, sap,
          rc, http)

 Network synchronization (netsync)
      --netsync-master, --no-netsync-master 
                                 Network master clock
                                 (default disabled)
          When set, this VLC instance will act as the master clock for
          synchronization for clients listening
      --netsync-master-ip=<string> 
                                 Master server IP address
          The IP address of the network master clock to use for clock
          synchronization.
      --netsync-timeout=<integer> 
                                 UDP timeout (in ms)
          Length of time (in ms) until aborting data reception.

 Mouse gestures control interface (gestures)
      --gestures-threshold=<integer> 
                                 Motion threshold (10-100)
          Amount of movement required for a mouse gesture to be recorded.
      --gestures-button={left,middle,right} 
                                 Trigger button
          Trigger button for mouse gestures.

 Dummy interface (dummy)
      --dummy-quiet, --no-dummy-quiet 
                                 Do not open a DOS command box interface
                                 (default disabled)
          By default the dummy interface plugin will start a DOS command box.
          Enabling the quiet mode will not bring this command box but can also
          be pretty annoying when you want to stop VLC and no video window is
          open.

 VBI and Teletext decoder (zvbi)
      --vbi-page=<integer [0 .. 7995392]> 
                                 Teletext page
          Open the indicated Teletext page. Default page is index 100.
      --vbi-opaque, --no-vbi-opaque 
                                 Opacity
                                 (default disabled)
          Setting to true makes the text to be boxed and maybe easier to read.
      --vbi-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Teletext alignment
          You can enforce the teletext position on the video (0=center, 1=left,
          2=right, 4=top, 8=bottom, you can also use combinations of these
          values, eg. 6 = top-right).
      --vbi-text, --no-vbi-text  Teletext text subtitles
                                 (default disabled)
          Output teletext subtitles as text instead of as RGBA.
      --vbi-level={0 (1), 1 (1.5), 2 (2.5), 3 (3.5)} 
                                 Presentation Level

 H.264/MPEG-4 Part 10/AVC encoder (x264) (x264)
      --sout-x264-keyint=<integer> 
                                 Maximum GOP size
          Sets maximum interval between IDR-frames. Larger values save bits,
          thus improving quality for a given bitrate at the cost of seeking
          precision. Use -1 for infinite.
      --sout-x264-min-keyint=<integer> 
                                 Minimum GOP size
          Sets minimum interval between IDR-frames. In H.264, I-frames do not
          necessarily bound a closed GOP because it is allowable for a P-frame
          to be predicted from more frames than just the one frame before it
          (also see reference frame option). Therefore, I-frames are not
          necessarily seekable. IDR-frames restrict subsequent P-frames from
          referring to any frame prior to the IDR-frame.  If scenecuts appear
          within this interval, they are still encoded as I-frames, but do not
          start a new GOP.
      --sout-x264-opengop, --no-sout-x264-opengop 
                                 Use recovery points to close GOPs
                                 (default disabled)
          use open GOP, for bluray compatibility use also bluray-compat option
      --sout-x264-bluray-compat, --no-sout-x264-bluray-compat 
                                 Enable compatibility hacks for Blu-ray support
                                 (default disabled)
          Enable hacks for Blu-ray support, this doesn't enforce every aspect
          of Blu-ray compatibility e.g. resolution, framerate, level
      --sout-x264-scenecut=<integer [-1 .. 100]> 
                                 Extra I-frames aggressivity
          Scene-cut detection. Controls how aggressively to insert extra
          I-frames. With small values of scenecut, the codec often has to force
          an I-frame when it would exceed keyint. Good values of scenecut may
          find a better location for the I-frame. Large values use more
          I-frames than necessary, thus wasting bits. -1 disables scene-cut
          detection, so I-frames are inserted only every other keyint frames,
          which probably leads to ugly encoding artifacts. Range 1 to 100.
      --sout-x264-bframes=<integer [0 .. 16]> 
                                 B-frames between I and P
          Number of consecutive B-frames between I and P-frames. Range 1 to 16.
      --sout-x264-b-adapt=<integer [0 .. 2]> 
                                 Adaptive B-frame decision
          Force the specified number of consecutive B-frames to be used, except
          possibly before an I-frame. Range 0 to 2.
      --sout-x264-b-bias=<integer [-100 .. 100]> 
                                 Influence (bias) B-frames usage
          Bias the choice to use B-frames. Positive values cause more B-frames,
          negative values cause less B-frames.
      --sout-x264-bpyramid={none,strict,normal} 
                                 Keep some B-frames as references
          Allows B-frames to be used as references for predicting other frames.
          Keeps the middle of 2+ consecutive B-frames as a reference, and
          reorders frame appropriately.  - none: Disabled  - strict: Strictly
          hierarchical pyramid  - normal: Non-strict (not Blu-ray compatible) 
      --sout-x264-cabac, --no-sout-x264-cabac 
                                 CABAC
                                 (default enabled)
          CABAC (Context-Adaptive Binary Arithmetic Coding). Slightly slows
          down encoding and decoding, but should save 10 to 15% bitrate.
      --sout-x264-fullrange, --no-sout-x264-fullrange 
                                 Use fullrange instead of TV colorrange
                                 (default disabled)
          TV-range is usually used colorrange, defining this to true will
          enable libx264 to use full colorrange on encoding
      --sout-x264-ref=<integer [1 .. 16]> 
                                 Number of reference frames
          Number of previous frames used as predictors. This is effective in
          Anime, but seems to make little difference in live-action source
          material. Some decoders are unable to deal with large frameref
          values. Range 1 to 16.
      --sout-x264-nf, --no-sout-x264-nf 
                                 Skip loop filter
                                 (default disabled)
          Deactivate the deblocking loop filter (decreases quality).
      --sout-x264-deblock=<string> 
                                 Loop filter AlphaC0 and Beta parameters
                                 alpha:beta
          Loop filter AlphaC0 and Beta parameters. Range -6 to 6 for both alpha
          and beta parameters. -6 means light filter, 6 means strong.
      --sout-x264-psy-rd=<string> 
                                 Strength of psychovisual optimization, default
                                 is "1.0:0.0"
          First parameter controls if RD is on (subme>=6) or off. Second
          parameter controls if Trellis is used on psychovisual optimization,
          default off
      --sout-x264-psy, --no-sout-x264-psy 
                                 Use Psy-optimizations
                                 (default enabled)
          Use all visual optimizations that can worsen both PSNR and SSIM
      --sout-x264-level=<string> H.264 level
          Specify H.264 level (as defined by Annex A of the standard). Levels
          are not enforced; it's up to the user to select a level compatible
          with the rest of the encoding options. Range 1 to 5.1 (10 to 51 is
          also allowed). Set to 0 for letting x264 set level.
      --sout-x264-profile={baseline,main,high,high10,high422,high444} 
                                 H.264 profile
          Specify H.264 profile which limits are enforced over other settings
      --sout-x264-interlaced, --no-sout-x264-interlaced 
                                 Interlaced mode
                                 (default disabled)
          Pure-interlaced mode.
      --sout-x264-frame-packing={-1 (), 0 (checkerboard), 1 (column alternation), 2 (row alternation), 3 (side by side), 4 (top bottom), 5 (frame alternation), 6 (2D)} 
                                 Frame packing
          For stereoscopic videos define frame arrangement:  0: checkerboard -
          pixels are alternatively from L and R  1: column alternation - L and
          R are interlaced by column  2: row alternation - L and R are
          interlaced by row  3: side by side - L is on the left, R on the right
           4: top bottom - L is on top, R on bottom  5: frame alternation - one
          view per frame
      --sout-x264-slices=<integer> 
                                 Force number of slices per frame
          Force rectangular slices and is overridden by other slicing options
      --sout-x264-slice-max-size=<integer> 
                                 Limit the size of each slice in bytes
          Sets a maximum slice size in bytes, Includes NAL overhead in size
      --sout-x264-slice-max-mbs=<integer> 
                                 Limit the size of each slice in macroblocks
          Sets a maximum number of macroblocks per slice
      --sout-x264-hrd={none,vbr,cbr} 
                                 HRD-timing information
          HRD-timing information
      --sout-x264-qp=<integer [-1 .. 51]> 
                                 Set QP
          This selects the quantizer to use. Lower values result in better
          fidelity, but higher bitrates. 26 is a good default value. Range 0
          (lossless) to 51.
      --sout-x264-crf=<integer [0 .. 51]> 
                                 Quality-based VBR
          1-pass Quality-based VBR. Range 0 to 51.
      --sout-x264-qpmin=<integer [0 .. 51]> 
                                 Min QP
          Minimum quantizer parameter. 15 to 35 seems to be a useful range.
      --sout-x264-qpmax=<integer [0 .. 51]> 
                                 Max QP
          Maximum quantizer parameter.
      --sout-x264-qpstep=<integer [0 .. 51]> 
                                 Max QP step
          Max QP step between frames.
      --sout-x264-ratetol=<float [0.000000 .. 100.000000]> 
                                 Average bitrate tolerance
          Allowed variance in average bitrate (in kbits/s).
      --sout-x264-vbv-maxrate=<integer> 
                                 Max local bitrate
          Sets a maximum local bitrate (in kbits/s).
      --sout-x264-vbv-bufsize=<integer> 
                                 VBV buffer
          Averaging period for the maximum local bitrate (in kbits).
      --sout-x264-vbv-init=<float [0.000000 .. 1.000000]> 
                                 Initial VBV buffer occupancy
          Sets the initial buffer occupancy as a fraction of the buffer size.
          Range 0.0 to 1.0.
      --sout-x264-ipratio=<float [1.000000 .. 2.000000]> 
                                 QP factor between I and P
          QP factor between I and P. Range 1.0 to 2.0.
      --sout-x264-pbratio=<float [1.000000 .. 2.000000]> 
                                 QP factor between P and B
          QP factor between P and B. Range 1.0 to 2.0.
      --sout-x264-chroma-qp-offset=<integer> 
                                 QP difference between chroma and luma
          QP difference between chroma and luma.
      --sout-x264-pass=<integer [0 .. 3]> 
                                 Multipass ratecontrol
          Multipass ratecontrol:  - 1: First pass, creates stats file  - 2:
          Last pass, does not overwrite stats file  - 3: Nth pass, overwrites
          stats file 
      --sout-x264-qcomp=<float [0.000000 .. 1.000000]> 
                                 QP curve compression
          QP curve compression. Range 0.0 (CBR) to 1.0 (QCP).
      --sout-x264-cplxblur=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Reduce fluctuations in QP
          This reduces the fluctuations in QP before curve compression.
          Temporally blurs complexity.
      --sout-x264-qblur=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Reduce fluctuations in QP
          This reduces the fluctuations in QP after curve compression.
          Temporally blurs quants.
      --sout-x264-aq-mode=<integer [0 .. 2]> 
                                 How AQ distributes bits
          Defines bitdistribution mode for AQ, default 1  - 0: Disabled  - 1:
          Current x264 default mode  - 2: uses log(var)^2 instead of log(var)
          and attempts to adapt strength per frame
      --sout-x264-aq-strength=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Strength of AQ
          Strength to reduce blocking and blurring in flat and textured areas,
          default 1.0 recommended to be between 0..2  - 0.5: weak AQ  - 1.5:
          strong AQ
      --sout-x264-partitions={none,fast,normal,slow,all} 
                                 Partitions to consider
          Partitions to consider in analyse mode:  - none  :   - fast  : i4x4 
          - normal: i4x4,p8x8,(i8x8)  - slow  : i4x4,p8x8,(i8x8),b8x8  - all  
          : i4x4,p8x8,(i8x8),b8x8,p4x4 (p4x4 requires p8x8. i8x8 requires
          8x8dct).
      --sout-x264-direct={none,spatial,temporal,auto} 
                                 Direct MV prediction mode
          Direct MV prediction mode
      --sout-x264-direct-8x8=<integer [-1 .. 1]> 
                                 Direct prediction size
          Direct prediction size:  -  0: 4x4  -  1: 8x8  - -1: smallest
          possible according to level 
      --sout-x264-weightb, --no-sout-x264-weightb 
                                 Weighted prediction for B-frames
                                 (default enabled)
          Weighted prediction for B-frames.
      --sout-x264-weightp=<integer [0 .. 2]> 
                                 Weighted prediction for P-frames
          Weighted prediction for P-frames:  - 0: Disabled  - 1: Blind offset 
          - 2: Smart analysis 
      --sout-x264-me={dia,hex,umh,esa,tesa} 
                                 Integer pixel motion estimation method
          Selects the motion estimation algorithm:  - dia: diamond search,
          radius 1 (fast)  - hex: hexagonal search, radius 2  - umh: uneven
          multi-hexagon search (better but slower)  - esa: exhaustive search
          (extremely slow, primarily for testing)  - tesa: hadamard exhaustive
          search (extremely slow, primarily for testing) 
      --sout-x264-merange=<integer [1 .. 64]> 
                                 Maximum motion vector search range
          Maximum distance to search for motion estimation, measured from
          predicted position(s). Default of 16 is good for most footage, high
          motion sequences may benefit from settings between 24 and 32. Range 0
          to 64.
      --sout-x264-mvrange=<integer> 
                                 Maximum motion vector length
          Maximum motion vector length in pixels. -1 is automatic, based on
          level.
      --sout-x264-mvrange-thread=<integer> 
                                 Minimum buffer space between threads
          Minimum buffer space between threads. -1 is automatic, based on
          number of threads.
      --sout-x264-subme=<integer> 
                                 Subpixel motion estimation and partition
                                 decision quality
          This parameter controls quality versus speed tradeoffs involved in
          the motion estimation decision process (lower = quicker and higher =
          better quality). Range 1 to 9.
      --sout-x264-mixed-refs, --no-sout-x264-mixed-refs 
                                 Decide references on a per partition basis
                                 (default enabled)
          Allows each 8x8 or 16x8 partition to independently select a reference
          frame, as opposed to only one ref per macroblock.
      --sout-x264-chroma-me, --no-sout-x264-chroma-me 
                                 Chroma in motion estimation
                                 (default enabled)
          Chroma ME for subpel and mode decision in P-frames.
      --sout-x264-8x8dct, --no-sout-x264-8x8dct 
                                 Adaptive spatial transform size
                                 (default enabled)
          SATD-based decision for 8x8 transform in inter-MBs.
      --sout-x264-trellis=<integer [0 .. 2]> 
                                 Trellis RD quantization
          Trellis RD quantization:  - 0: disabled  - 1: enabled only on the
          final encode of a MB  - 2: enabled on all mode decisions This
          requires CABAC.
      --sout-x264-lookahead=<integer [0 .. 60]> 
                                 Framecount to use on frametype lookahead
          Framecount to use on frametype lookahead. Currently default can cause
          sync-issues on unmuxable output, like rtsp-output without ts-mux
      --sout-x264-intra-refresh, --no-sout-x264-intra-refresh 
                                 Use Periodic Intra Refresh
                                 (default disabled)
          Use Periodic Intra Refresh instead of IDR frames
      --sout-x264-mbtree, --no-sout-x264-mbtree 
                                 Use mb-tree ratecontrol
                                 (default enabled)
          You can disable use of Macroblock-tree on ratecontrol
      --sout-x264-fast-pskip, --no-sout-x264-fast-pskip 
                                 Early SKIP detection on P-frames
                                 (default enabled)
          Early SKIP detection on P-frames.
      --sout-x264-dct-decimate, --no-sout-x264-dct-decimate 
                                 Coefficient thresholding on P-frames
                                 (default enabled)
          Coefficient thresholding on P-frames. Eliminate dct blocks containing
          only a small single coefficient.
      --sout-x264-nr=<integer [0 .. 1000]> 
                                 Noise reduction
          Dct-domain noise reduction. Adaptive pseudo-deadzone. 10 to 1000
          seems to be a useful range.
      --sout-x264-deadzone-inter=<integer [0 .. 32]> 
                                 Inter luma quantization deadzone
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
      --sout-x264-deadzone-intra=<integer [0 .. 32]> 
                                 Intra luma quantization deadzone
          Set the size of the intra luma quantization deadzone. Range 0 to 32.
      --sout-x264-non-deterministic, --no-sout-x264-non-deterministic 
                                 Non-deterministic optimizations when threaded
                                 (default disabled)
          Slightly improve quality of SMP, at the cost of repeatability.
      --sout-x264-asm, --no-sout-x264-asm 
                                 CPU optimizations
                                 (default enabled)
          Use assembler CPU optimizations.
      --sout-x264-psnr, --no-sout-x264-psnr 
                                 PSNR computation
                                 (default disabled)
          Compute and print PSNR stats. This has no effect on the actual
          encoding quality.
      --sout-x264-ssim, --no-sout-x264-ssim 
                                 SSIM computation
                                 (default disabled)
          Compute and print SSIM stats. This has no effect on the actual
          encoding quality.
      --sout-x264-quiet, --no-sout-x264-quiet 
                                 Quiet mode
                                 (default disabled)
          Quiet mode
      --sout-x264-sps-id=<integer> 
                                 SPS and PPS id numbers
          Set SPS and PPS id numbers to allow concatenating streams with
          different settings.
      --sout-x264-aud, --no-sout-x264-aud 
                                 Access unit delimiters
                                 (default disabled)
          Generate access unit delimiter NAL units.
      --sout-x264-verbose, --no-sout-x264-verbose 
                                 Statistics
                                 (default disabled)
          Print stats for each frame.
      --sout-x264-stats=<string> Filename for 2 pass stats file
          Filename for 2 pass stats file for multi-pass encoding.
      --sout-x264-preset={ultrafast,superfast,veryfast,faster,fast,medium,slow,slower,veryslow,placebo} 
                                 Default preset setting used
          Default preset setting used
      --sout-x264-tune={film,animation,grain,stillimage,psnr,ssim,fastdecode,zerolatency} 
                                 Default tune setting used
          Default tune setting used
      --sout-x264-options=<string> 
                                 x264 advanced options
          x264 advanced options, in the form {opt=val,op2=val2}.

 WebM video decoder (vpx)
      --sout-vpx-quality-mode=<integer [0 .. 2]> 
                                 Quality mode
          Quality setting which will determine max encoding time  - 0: Good
          quality  - 1: Realtime  - 2: Best quality

 Vorbis audio decoder (vorbis)
      --sout-vorbis-quality=<integer [0 .. 10]> 
                                 Encoding quality
          Enforce a quality between 1 (low) and 10 (high), instead of
          specifying a particular bitrate. This will produce a VBR stream.
      --sout-vorbis-max-bitrate=<integer> 
                                 Maximum encoding bitrate
          Maximum bitrate in kbps. This is useful for streaming applications.
      --sout-vorbis-min-bitrate=<integer> 
                                 Minimum encoding bitrate
          Minimum bitrate in kbps. This is useful for encoding for a fixed-size
          channel.
      --sout-vorbis-cbr, --no-sout-vorbis-cbr 
                                 CBR encoding
                                 (default disabled)
          Force a constant bitrate encoding (CBR).

 Libtwolame audio encoder (twolame)
      --sout-twolame-quality=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Encoding quality
          Force a specific encoding quality between 0.0 (high) and 50.0 (low),
          instead of specifying a particular bitrate. This will produce a VBR
          stream.
      --sout-twolame-mode={0 (Stereo), 1 (Dual mono), 2 (Joint stereo)} 
                                 Stereo mode
          Handling mode for stereo streams
      --sout-twolame-vbr, --no-sout-twolame-vbr 
                                 VBR mode
                                 (default disabled)
          Use Variable BitRate. Default is to use Constant BitRate (CBR).
      --sout-twolame-psy=<integer> 
                                 Psycho-acoustic model
          Integer from -1 (no model) to 4.

 TTML subtitles decoder (ttml)
      --ttml-align=<integer>     Subtitle justification
          Set the justification of subtitles

 Theora video decoder (theora)
      --theora-postproc=<integer> 
                                 Post processing quality
      --sout-theora-quality=<integer> 
                                 Encoding quality
          Enforce a quality between 1 (low) and 10 (high), instead of
          specifying a particular bitrate. This will produce a VBR stream.

 USF subtitles decoder (subsusf)
      --subsdec-formatted, --no-subsdec-formatted 
                                 Formatted Subtitles
                                 (default enabled)
          Some subtitle formats allow for text formatting. VLC partly
          implements this, but you can choose to disable all formatting.

 Text subtitle decoder (subsdec)
      --subsdec-align={0 (Center), 1 (Left), 2 (Right)} 
                                 Subtitle justification
          Set the justification of subtitles
      --subsdec-encoding={,system,UTF-8,UTF-16,UTF-16BE,UTF-16LE,GB18030,ISO-8859-15,Windows-1252,IBM850,ISO-8859-2,Windows-1250,ISO-8859-3,ISO-8859-10,Windows-1251,KOI8-R,KOI8-U,ISO-8859-6,Windows-1256,ISO-8859-7,Windows-1253,ISO-8859-8,Windows-1255,ISO-8859-9,Windows-1254,ISO-8859-11,Windows-874,ISO-8859-13,Windows-1257,ISO-8859-14,ISO-8859-16,ISO-2022-CN-EXT,EUC-CN,ISO-2022-JP-2,EUC-JP,Shift_JIS,CP949,ISO-2022-KR,Big5,ISO-2022-TW,Big5-HKSCS,VISCII,Windows-1258} 
                                 Subtitle text encoding
          Set the encoding used in text subtitles
      --subsdec-autodetect-utf8, --no-subsdec-autodetect-utf8 
                                 UTF-8 subtitle autodetection
                                 (default enabled)
          This enables automatic detection of UTF-8 encoding within subtitle
          files.

 DVD subtitles decoder (spudec)
      --dvdsub-transparency, --no-dvdsub-transparency 
                                 Disable DVD subtitle transparency
                                 (default disabled)
          Removes all transparency effects used in DVD subtitles.

 Speex audio decoder (speex)
      --sout-speex-mode={0 (Narrow-band (8kHz)), 1 (Wide-band (16kHz)), 2 (Ultra-wideband (32kHz))} 
                                 Mode
          Enforce the mode of the encoder.
      --sout-speex-complexity=<integer [1 .. 10]> 
                                 Encoding complexity
          Enforce the complexity of the encoder.
      --sout-speex-cbr, --no-sout-speex-cbr 
                                 CBR encoding
                                 (default disabled)
          Enforce a constant bitrate encoding (CBR) instead of default variable
          bitrate encoding (VBR).
      --sout-speex-quality=<float [0.000000 .. 10.000000]> 
                                 Encoding quality
          Enforce a quality between 0 (low) and 10 (high).
      --sout-speex-max-bitrate=<integer> 
                                 Maximal bitrate
          Enforce the maximal VBR bitrate
      --sout-speex-vad, --no-sout-speex-vad 
                                 Voice activity detection
                                 (default enabled)
          Enable voice activity detection (VAD). It is automatically activated
          in VBR mode.
      --sout-speex-dtx, --no-sout-speex-dtx 
                                 Discontinuous Transmission
                                 (default disabled)
          Enable discontinuous transmission (DTX).

 Dirac video decoder using libschroedinger (schroedinger)
   Encoding:
      --sout-schro-rate-control={constant_noise_threshold,constant_bitrate,low_delay,lossless,constant_lambda,constant_error,constant_quality} 
                                 Rate control method
          Method used to encode the video sequence
      --sout-schro-quality=<float [-1.000000 .. 10.000000]> 
                                 Constant quality factor
          Quality factor to use in constant quality mode
      --sout-schro-noise-threshold=<float [-1.000000 .. 100.000000]> 
                                 Noise Threshold
          Noise threshold to use in constant noise threshold mode
      --sout-schro-bitrate=<integer [-1 .. 2147483647]> 
                                 CBR bitrate (kbps)
          Target bitrate in kbps when encoding in constant bitrate mode
      --sout-schro-max-bitrate=<integer [-1 .. 2147483647]> 
                                 Maximum bitrate (kbps)
          Maximum bitrate in kbps when encoding in constant bitrate mode
      --sout-schro-min-bitrate=<integer [-1 .. 2147483647]> 
                                 Minimum bitrate (kbps)
          Minimum bitrate in kbps when encoding in constant bitrate mode
      --sout-schro-gop-structure={adaptive,intra_only,backref,chained_backref,biref,chained_biref} 
                                 GOP structure
          GOP structure used to encode the video sequence
      --sout-schro-gop-length=<integer [-1 .. 2147483647]> 
                                 GOP length
          Number of pictures between successive sequence headers i.e. length of
          the group of pictures
      --sout-schro-chroma-fmt={420,422,444} 
                                 Chroma format
          Picking chroma format will force a conversion of the video into that
          format
      --sout-schro-coding-mode={auto,progressive,field} 
                                 Picture coding mode
          Field coding is where interlaced fields are coded separately as
          opposed to a pseudo-progressive frame
      --sout-schro-mv-precision={1,1/2,1/4,1/8} 
                                 Motion Vector precision
          Motion Vector precision in pels
      --sout-schro-motion-block-size={automatic,small,medium,large} 
                                 Size of motion compensation blocks
          Size of motion compensation blocks
      --sout-schro-motion-block-overlap={automatic,none,partial,full} 
                                 Overlap of motion compensation blocks
          Overlap of motion compensation blocks
      --sout-schro-me-combined=<integer [-1 .. 1]> 
                                 Three component motion estimation
          Use chroma as part of the motion estimation process
      --sout-schro-enable-hierarchical-me=<integer [-1 .. 1]> 
                                 Enable hierarchical Motion Estimation
          Enable hierarchical Motion Estimation
      --sout-schro-downsample-levels=<integer [-1 .. 8]> 
                                 Number of levels of downsampling
          Number of levels of downsampling in hierarchical motion estimation
          mode
      --sout-schro-enable-global-me=<integer [-1 .. 1]> 
                                 Enable Global Motion Estimation
          Enable Global Motion Estimation
      --sout-schro-enable-phasecorr-me=<integer [-1 .. 1]> 
                                 Enable Phase Correlation Estimation
          Enable Phase Correlation Estimation
      --sout-schro-intra-wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7} 
                                 Intra picture DWT filter
          Intra picture DWT filter
      --sout-schro-inter-wavelet={desl_dubuc_9_7,le_gall_5_3,desl_dubuc_13_7,haar_0,haar_1,fidelity,daub_9_7} 
                                 Inter picture DWT filter
          Inter picture DWT filter
      --sout-schro-transform-depth=<integer [-1 .. 6]> 
                                 Number of DWT iterations
          Also known as DWT levels
      --sout-schro-enable-multiquant=<integer [-1 .. 1]> 
                                 Enable multiple quantizers
          Enable multiple quantizers per subband (one per codeblock)
      --sout-schro-codeblock-size={automatic,small,medium,large,full} 
                                 Size of code blocks in each subband
          Size of code blocks in each subband
      --sout-schro-filtering={none,center_weighted_median,gaussian,add_noise,adaptive_gaussian,lowpass} 
                                 Prefilter
          Enable adaptive prefiltering
      --sout-schro-filter-value=<float [-1.000000 .. 100.000000]> 
                                 Amount of prefiltering
          Higher value implies more prefiltering
      --sout-schro-enable-scd=<integer [-1 .. 1]> 
                                 Enable Scene Change Detection
          Enable Scene Change Detection
      --sout-schro-perceptual-weighting={none,ccir959,moo,manos_sakrison} 
                                 perceptual weighting method
          perceptual weighting method
      --sout-schro-perceptual-distance=<float [-1.000000 .. 100.000000]> 
                                 perceptual distance
          perceptual distance to calculate perceptual weight
      --sout-schro-enable-noarith=<integer [-1 .. 1]> 
                                 Disable arithmetic coding
          Use variable length codes instead, useful for very high bitrates
      --sout-schro-horiz-slices=<integer [-1 .. 2147483647]> 
                                 Horizontal slices per frame
          Number of horizontal slices per frame in low delay mode
      --sout-schro-vert-slices=<integer [-1 .. 2147483647]> 
                                 Vertical slices per frame
          Number of vertical slices per frame in low delay mode
      --sout-schro-force-profile={auto,vc2_low_delay,vc2_simple,vc2_main,main} 
                                 Force Profile
          Force Profile

 Intel QuickSync Video encoder for MPEG4-Part10/MPEG2 (aka H.264/H.262) (qsv)
      --sout-qsv-software, --no-sout-qsv-software 
                                 Enable software mode
                                 (default disabled)
          Allow the use of the Intel Media SDK software implementation of the
          codecs if no QuickSync Video hardware acceleration is present on the
          system.
      --sout-qsv-h264-profile={decide,baseline,main,extended,high} 
                                 Codec Profile
          Specify the codec profile explicitly. If you don't, the codec will
          determine the correct profile from other sources, such as resolution
          and bitrate. E.g. 'high'
      --sout-qsv-h264-level={decide,1,1.1b,1.2,1.3,2,2.1,2.2,3,3.1,3.2,4,4.1,4.2,5,5.1,5.2} 
                                 Codec Level
          Specify the codec level explicitly. If you don't, the codec will
          determine the correct profile from other sources, such as resolution
          and bitrate. E.g. '4.2' for mpeg4-part10 or 'low' for mpeg2
      --sout-qsv-mpeg2-profile={decide,simple,main,high} 
                                 Codec Profile
          Specify the codec profile explicitly. If you don't, the codec will
          determine the correct profile from other sources, such as resolution
          and bitrate. E.g. 'high'
      --sout-qsv-mpeg2-level={decide,low,main,high,high1440} 
                                 Codec Level
          Specify the codec level explicitly. If you don't, the codec will
          determine the correct profile from other sources, such as resolution
          and bitrate. E.g. '4.2' for mpeg4-part10 or 'low' for mpeg2
      --sout-qsv-gop-size=<integer> 
                                 Group of Picture size
          Number of pictures within the current GOP (Group of Pictures); if
          GopPicSize=0, then the GOP size is unspecified. If GopPicSize=1, only
          I-frames are used.
      --sout-qsv-gop-refdist=<integer> 
                                 Group of Picture Reference Distance
          Distance between I- or P- key frames; if it is zero, the GOP
          structure is unspecified. Note: If GopRefDist = 1, there are no
          B-frames used.
      --sout-qsv-idr-interval=<integer> 
                                 IDR interval
          For H.264, IdrInterval specifies IDR-frame interval in terms of
          I-frames; if IdrInterval=0, then every I-frame is an IDR-frame. If
          IdrInterval=1, then every other I-frame is an IDR-frame, etc. For
          MPEG2, IdrInterval defines sequence header interval in terms of
          I-frames. If IdrInterval=N, SDK inserts the sequence header before
          every Nth I-frame. If IdrInterval=0 (default), SDK inserts the
          sequence header once at the beginning of the stream.
      --sout-qsv-target-usage={decide,quality,balanced,speed} 
                                 Target Usage
          The target usage allow to choose between different trade-offs between
          quality and speed. Allowed values are: 'speed', 'balanced' and
          'quality'.
      --sout-qsv-rc-method={cbr,vbr,qp,avbr} 
                                 Rate Control Method
          The rate control method to use when encoding. Can be one of 'cbr',
          'vbr', 'qp', 'avbr'. 'qp' mode isn't supported for mpeg2.
      --sout-qsv-qp=<integer [0 .. 51]> 
                                 Quantization parameter
          Quantization parameter for all types of frames. This parameters sets
          qpi, qpp and qpb. It has less precedence than the forementionned
          parameters. Used only if rc_method is 'qp'.
      --sout-qsv-qpi=<integer [0 .. 51]> 
                                 Quantization parameter for I-frames
          Quantization parameter for I-frames. This parameter overrides any qp
          set globally. Used only if rc_method is 'qp'.
      --sout-qsv-qpp=<integer [0 .. 51]> 
                                 Quantization parameter for P-frames
          Quantization parameter for P-frames. This parameter overrides any qp
          set globally. Used only if rc_method is 'qp'.
      --sout-qsv-qpb=<integer [0 .. 51]> 
                                 Quantization parameter for B-frames
          Quantization parameter for B-frames. This parameter overrides any qp
          set globally. Used only if rc_method is 'qp'.
      --sout-qsv-bitrate-max=<integer> 
                                 Maximum Bitrate
          Defines the maximum bitrate in kbps (1000 bits/s) for VBR rate
          control method. If not set, this parameter is computed from other
          sources such as bitrate, profile, level, etc.
      --sout-qsv-accuracy=<integer [0 .. 100]> 
                                 Accuracy of RateControl
          Tolerance in percentage of the 'avbr'  (Average Variable BitRate)
          method. (e.g. 10 with a bitrate of 800  kbps means the encoder tries
          not to  go above 880 kbps and under  730 kbps. The targeted accuracy
          is only reached after a certained  convergence period. See the
          convergence parameter
      --sout-qsv-convergence=<integer> 
                                 Convergence time of 'avbr' RateControl
          Number of 100 frames before the 'avbr' rate control method reaches
          the requested bitrate with the requested accuracy. See the accuracy
          parameter.
      --sout-qsv-num-slice=<integer> 
                                 Number of slices per frame
          Number of slices in each video frame; each slice contains one or more
          macro-block rows. If numslice is not set, the encoder may choose any
          slice partitioning allowed by the codec standard.
      --sout-qsv-num-ref-frame=<integer> 
                                 Number of reference frames
          Number of reference frames
      --sout-qsv-async-depth=<integer [1 .. 32]> 
                                 Number of parallel operations
          Defines the number of parallel encoding operations before we
          synchronise the result. Higher numbers may result on better
          throughput depending on hardware. MPEG2 needs at least 1 here.

 Kate overlay decoder (kate)
 Kate is a codec for text and image based overlays.
The Tiger rendering library is needed to render complex Kate streams, but VLC can still render static text and image based subtitles if it is not available.
Note that changing settings below will not take effect until a new stream is played. This will hopefully be fixed soon.
      --kate-formatted, --no-kate-formatted 
                                 Formatted Subtitles
                                 (default enabled)
          Kate streams allow for text formatting. VLC partly implements this,
          but you can choose to disable all formatting. Note that this has no
          effect is rendering via Tiger is enabled.

 JPEG image decoder (jpeg)
   Encoding:
      --sout-jpeg-quality=<integer [0 .. 100]> 
                                 Quality level
          Quality level for encoding (this can enlarge or reduce output image
          size).

 FluidSynth MIDI synthesizer (fluidsynth)
      --soundfont=<string>       SoundFont file
          SoundFont file to use for software synthesis.
      --synth-chorus, --no-synth-chorus 
                                 Chorus
                                 (default enabled)
          Chorus
      --synth-gain=<float [0.000000 .. 10.000000]> 
                                 Synthesis gain
          This gain is applied to synthesis output. High values may cause
          saturation when many notes are played at a time.
      --synth-polyphony=<integer [1 .. 65535]> 
                                 Polyphony
          The polyphony defines how many voices can be played at a time. Larger
          values require more processing power.
      --synth-reverb, --no-synth-reverb 
                                 Reverb
                                 (default enabled)
          Reverb
      --synth-sample-rate=<integer [22050 .. 96000]> 
                                 Sample rate
          Sample rate

 DVB subtitles decoder (dvbsub)
      --dvbsub-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Subpicture position
          You can enforce the subpicture position on the video (0=center,
          1=left, 2=right, 4=top, 8=bottom, you can also use combinations of
          these values, e.g. 6=top-right).
      --dvbsub-x=<integer>       Decoding X coordinate
          X coordinate of the rendered subtitle
      --dvbsub-y=<integer>       Decoding Y coordinate
          Y coordinate of the rendered subtitle
      --sout-dvbsub-x=<integer>  Encoding X coordinate
          X coordinate of the encoded subtitle
      --sout-dvbsub-y=<integer>  Encoding Y coordinate
          Y coordinate of the encoded subtitle

 Dummy decoder (ddummy)
      --dummy-save-es, --no-dummy-save-es 
                                 Save raw codec data
                                 (default disabled)
          Save the raw codec data if you have selected/forced the dummy decoder
          in the main options.

 DTS Coherent Acoustics audio decoder (dca)
      --dts-dynrng, --no-dts-dynrng 
                                 DTS dynamic range compression
                                 (default enabled)
          Dynamic range compression makes the loud sounds softer, and the soft
          sounds louder, so you can more easily listen to the stream in a noisy
          environment without disturbing anyone. If you disable the dynamic
          range compression the playback will be more adapted to a movie
          theater or a listening room.

 Closed Captions decoder (cc)
      --cc-opaque, --no-cc-opaque 
                                 Opacity
                                 (default enabled)
          Setting to true makes the text to be boxed and maybe easier to read.

 FFmpeg audio/video decoder (avcodec)
 Various audio and video decoders/encoders delivered by the FFmpeg library. This includes (MS)MPEG4, DivX, SV1,H261, H263, H264, WMV, WMA, AAC, AMR, DV, MJPEG and other codecs
   Decoding:
      --avcodec-dr, --no-avcodec-dr 
                                 Direct rendering
                                 (default enabled)
          Direct rendering
      --avcodec-corrupted, --no-avcodec-corrupted 
                                 Show corrupted frames
                                 (default enabled)
          Prefer visual artifacts instead of missing frames
      --avcodec-error-resilience=<integer> 
                                 Error resilience
          libavcodec can do error resilience. However, with a buggy encoder
          (such as the ISO MPEG-4 encoder from M$) this can produce a lot of
          errors. Valid values range from 0 to 4 (0 disables all errors
          resilience).
      --avcodec-workaround-bugs=<integer> 
                                 Workaround bugs
          Try to fix some bugs: 1  autodetect 2  old msmpeg4 4  xvid interlaced
          8  ump4  16 no padding 32 ac vlc 64 Qpel chroma. This must be the sum
          of the values. For example, to fix "ac vlc" and "ump4", enter 40.
      --avcodec-hurry-up, --no-avcodec-hurry-up 
                                 Hurry up
                                 (default enabled)
          The decoder can partially decode or skip frame(s) when there is not
          enough time. It's useful with low CPU power but it can produce
          distorted pictures.
      --avcodec-skip-frame={-1 (None), 0 (Default), 1 (Non-ref), 2 (Bidir), 3 (Non-key), 4 (All)} 
                                 Skip frame (default=0)
          Force skipping of frames to speed up decoding (-1=None, 0=Default,
          1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
      --avcodec-skip-idct=<integer [-1 .. 4]> 
                                 Skip idct (default=0)
          Force skipping of idct to speed up decoding for frame types (-1=None,
          0=Default, 1=B-frames, 2=P-frames, 3=B+P frames, 4=all frames).
      --avcodec-fast, --no-avcodec-fast 
                                 Allow speed tricks
                                 (default disabled)
          Allow non specification compliant speedup tricks. Faster but
          error-prone.
      --avcodec-skiploopfilter={0 (None), 1 (Non-ref), 2 (Bidir), 3 (Non-key), 4 (All)} 
                                 Skip the loop filter for H.264 decoding
          Skipping the loop filter (aka deblocking) usually has a detrimental
          effect on quality. However it provides a big speedup for high
          definition streams.
      --avcodec-debug=<integer>  Debug mask
          Set FFmpeg debug mask
      --avcodec-codec=<string>   Codec name
          Internal libavcodec codec name
      --avcodec-hw={any,d3d11va,dxva2,none} 
                                 Hardware decoding
          This allows hardware decoding when available.
      --avcodec-threads=<integer> 
                                 Threads
          Number of threads used for decoding, 0 meaning auto
      --avcodec-options=<string> Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.
   Encoding:
      --sout-avcodec-codec=<string> 
                                 Codec name
          Internal libavcodec codec name
      --sout-avcodec-hq={rd,bits,simple} 
                                 Quality level
          Quality level for the encoding of motions vectors (this can slow down
          the encoding very much).
      --sout-avcodec-keyint=<integer> 
                                 Ratio of key frames
          Number of frames that will be coded for one key frame.
      --sout-avcodec-bframes=<integer> 
                                 Ratio of B frames
          Number of B frames that will be coded between two reference frames.
      --sout-avcodec-hurry-up, --no-sout-avcodec-hurry-up 
                                 Hurry up
                                 (default disabled)
          The encoder can make on-the-fly quality tradeoffs if your CPU can't
          keep up with the encoding rate. It will disable trellis quantization,
          then the rate distortion of motion vectors (hq), and raise the noise
          reduction threshold to ease the encoder's task.
      --sout-avcodec-interlace, --no-sout-avcodec-interlace 
                                 Interlaced encoding
                                 (default disabled)
          Enable dedicated algorithms for interlaced frames.
      --sout-avcodec-interlace-me, --no-sout-avcodec-interlace-me 
                                 Interlaced motion estimation
                                 (default enabled)
          Enable interlaced motion estimation algorithms. This requires more
          CPU.
      --sout-avcodec-vt=<integer> 
                                 Video bitrate tolerance
          Video bitrate tolerance in kbit/s.
      --sout-avcodec-pre-me, --no-sout-avcodec-pre-me 
                                 Pre-motion estimation
                                 (default disabled)
          Enable the pre-motion estimation algorithm.
      --sout-avcodec-rc-buffer-size=<integer> 
                                 Rate control buffer size
          Rate control buffer size (in kbytes). A bigger buffer will allow for
          better rate control, but will cause a delay in the stream.
      --sout-avcodec-rc-buffer-aggressivity=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Rate control buffer aggressiveness
          Rate control buffer aggressiveness.
      --sout-avcodec-i-quant-factor=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 I quantization factor
          Quantization factor of I frames, compared with P frames (for instance
          1.0 => same qscale for I and P frames).
      --sout-avcodec-noise-reduction=<integer> 
                                 Noise reduction
          Enable a simple noise reduction algorithm to lower the encoding
          length and bitrate, at the expense of lower quality frames.
      --sout-avcodec-mpeg4-matrix, --no-sout-avcodec-mpeg4-matrix 
                                 MPEG4 quantization matrix
                                 (default disabled)
          Use the MPEG4 quantization matrix for MPEG2 encoding. This generally
          yields a better looking picture, while still retaining the
          compatibility with standard MPEG2 decoders.
      --sout-avcodec-qmin=<integer> 
                                 Minimum video quantizer scale
          Minimum video quantizer scale.
      --sout-avcodec-qmax=<integer> 
                                 Maximum video quantizer scale
          Maximum video quantizer scale.
      --sout-avcodec-trellis, --no-sout-avcodec-trellis 
                                 Trellis quantization
                                 (default disabled)
          Enable trellis quantization (rate distortion for block coefficients).
      --sout-avcodec-qscale=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Fixed quantizer scale
          A fixed video quantizer scale for VBR encoding (accepted values: 0.01
          to 255.0).
      --sout-avcodec-strict=<integer [-2 .. 2]> 
                                 Strict standard compliance
          Force a strict standard compliance when encoding (accepted values: -2
          to 2).
      --sout-avcodec-lumi-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Luminance masking
          Raise the quantizer for very bright macroblocks (default: 0.0).
      --sout-avcodec-dark-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Darkness masking
          Raise the quantizer for very dark macroblocks (default: 0.0).
      --sout-avcodec-p-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Motion masking
          Raise the quantizer for macroblocks with a high temporal complexity
          (default: 0.0).
      --sout-avcodec-border-masking=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Border masking
          Raise the quantizer for macroblocks at the border of the frame
          (default: 0.0).
      --sout-avcodec-luma-elim-threshold=<integer> 
                                 Luminance elimination
          Eliminates luminance blocks when the PSNR isn't much changed
          (default: 0.0). The H264 specification recommends -4.
      --sout-avcodec-chroma-elim-threshold=<integer> 
                                 Chrominance elimination
          Eliminates chrominance blocks when the PSNR isn't much changed
          (default: 0.0). The H264 specification recommends 7.
      --sout-avcodec-aac-profile=<string> 
                                 Specify AAC audio profile to use
          Specify the AAC audio profile to use for encoding the audio
          bitstream. It takes the following options: main, low, ssr (not
          supported),ltp, hev1, hev2 (default: low). hev1 and hev2 are
          currently supported only with libfdk-aac enabled libavcodec
      --sout-avcodec-options=<string> 
                                 Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.
   Demuxer:
      --avformat-format=<string> Format name
          Internal libavcodec format name
      --avformat-options=<string> 
                                 Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.
   Muxer:
      --sout-avformat-mux=<string> 
                                 Avformat mux
          Force use of a specific avformat muxer.
      --sout-avformat-options=<string> 
                                 Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.
   Input:
      --avio-options=<string>    Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.
   Stream output:
      --sout-avio-options=<string> 
                                 Advanced options
          Advanced options, in the form {opt=val,opt2=val2}.

 ARIB subtitles decoder (aribsub)
      --aribsub-ignore-ruby, --no-aribsub-ignore-ruby 
                                 Ignore ruby (furigana)
                                 (default disabled)
          Ignore ruby (furigana) in the subtitle.
      --aribsub-use-coretext, --no-aribsub-use-coretext 
                                 Use Core Text renderer
                                 (default disabled)
          Use Core Text renderer in the subtitle.

 ATSC A/52 (AC-3) audio decoder (a52)
      --a52-dynrng, --no-a52-dynrng 
                                 A/52 dynamic range compression
                                 (default enabled)
          Dynamic range compression makes the loud sounds softer, and the soft
          sounds louder, so you can more easily listen to the stream in a noisy
          environment without disturbing anyone. If you disable the dynamic
          range compression the playback will be more adapted to a movie
          theater or a listening room.

 WaveOut audio output (waveout)
      --waveout-audio-device={wavemapper,Speakers (ASUS Xonar DG Audio D ($1,$64),S/PDIF Pass-through Device (ASU ($1,$64),CABLE Input (VB-Audio Virtual C ($1,$64)} 
                                 Select Audio Device
          Select special Audio device, or let windows decide (default), change
          needs VLC restart to apply.
      --waveout-volume=<float [0.000000 .. 2.000000]> 
                                 Audio volume
      --waveout-float32, --no-waveout-float32 
                                 Use float32 output
                                 (default enabled)
          The option allows you to enable or disable the high-quality float32
          audio output mode (which is not well supported by some soundcards).
      --waveout-audio-channels=<integer [1 .. 9]> 
                                 Audio output channels
          Channels available for audio output. If the input has more channels
          than the output, it will be down-mixed. This parameter is ignored
          when digital pass-through is active.

 Windows Multimedia Device output (mmdevice)
      --mmdevice-backend={any,wasapi,directsound,none} 
                                 Output back-end
          Audio output back-end interface.
      --mmdevice-passthrough={0 (Disabled), 1 (Enabled (without HD codecs)), 2 (Enabled)} 
                                 HDMI/SPDIF audio passthrough
          Change this value if you have issue with HD codecs when using a HDMI
          receiver.
      --mmdevice-audio-device={,{0.0.0.00000000}.{435351ed-7f2a-4588-83d5-d460b7fa5fa7},{0.0.0.00000000}.{4b187877-fc84-4130-b74c-87ece9e3eb5f},{0.0.0.00000000}.{ecb415c9-9835-4a9d-b618-104e7179b206}} 
                                 Output device
          Select your audio output device
      --mmdevice-volume=<float [0.000000 .. 1.250000]> 
                                 Audio volume
          Audio volume in hundredths of decibels (dB).

 DirectX audio output (directsound)
      --directx-audio-device={,{ECB415C9-9835-4A9D-B618-104E7179B206},{435351ED-7F2A-4588-83D5-D460B7FA5FA7},{4B187877-FC84-4130-B74C-87ECE9E3EB5F}} 
                                 Output device
          Select your audio output device
      --directx-audio-float32, --no-directx-audio-float32 
                                 Use float32 output
                                 (default enabled)
          The option allows you to enable or disable the high-quality float32
          audio output mode (which is not well supported by some soundcards).
      --directx-audio-speaker={Windows default,Mono,Stereo,Quad,5.1,7.1} 
                                 Speaker configuration
          Select speaker configuration you want to use. This option doesn't
          upmix! So NO e.g. Stereo -> 5.1 conversion.
      --directx-volume=<float [0.000000 .. 2.000000]> 
                                 Audio volume
          Audio volume in hundredths of decibels (dB).

 Audio memory output (amem)
      --amem-format=<string>     Sample format
          Sample format
      --amem-rate=<integer [1 .. 352800]> 
                                 Sample rate
          Sample rate
      --amem-channels=<integer [1 .. 9]> 
                                 Channels count
          Channels count

 File audio output (afile)
      --audiofile-file=<string>  Output file
          File to which the audio samples will be written to ("-" for stdout).
      --audiofile-format={u8,s16,float32,spdif} 
                                 Output format
          Output format
      --audiofile-channels=<integer [0 .. 6]> 
                                 Number of output channels
          By default (0), all the channels of the incoming will be saved but
          you can restrict the number of channels here.
      --audiofile-wav, --no-audiofile-wav 
                                 Add WAVE header
                                 (default enabled)
          Instead of writing a raw file, you can add a WAV header to the file.

 Simple stereo widening effect (stereo_widen)
 This filter enhances the stereo effect by suppressing mono (signal common to both channels) and by delaying the signal of left into right and vice versa, thereby widening the stereo effect.
      --stereowiden-delay=<float [1.000000 .. 100.000000]> 
                                 Delay time
          Time in ms of the delay of left signal into right and vice versa.
      --stereowiden-feedback=<float [0.000000 .. 0.900000]> 
                                 Feedback gain
          Amount of gain in delayed left signal into right and vice versa.
          Gives a delay effect of left signal in right output and vice versa
          which gives widening effect.
      --stereowiden-crossfeed=<float [0.000000 .. 0.800000]> 
                                 Crossfeed
          Cross feed of left into right with inverted phase. This helps in
          suppressing the mono. If the value is 1 it will cancel all the signal
          common to both channels.
      --stereowiden-dry-mix=<float [0.000000 .. 1.000000]> 
                                 Dry mix
          Level of input signal of original channel.

 Speex resampler (speex_resampler)
      --speex-resampler-quality=<integer [0 .. 10]> 
                                 Resampling quality
          Resampling quality, from worst to best

 Audio Spatializer (spatializer)
      --spatializer-roomsize=<float [0.000000 .. 1.100000]> 
                                 Room size
          Defines the virtual surface of the room emulated by the filter.
      --spatializer-width=<float [0.000000 .. 1.000000]> 
                                 Room width
          Width of the virtual room
      --spatializer-wet=<float [0.000000 .. 1.000000]> 
                                 Wet
      --spatializer-dry=<float [0.000000 .. 1.000000]> 
                                 Dry
      --spatializer-damp=<float [0.000000 .. 1.000000]> 
                                 Damp

 Ambisonics renderer and binauralizer (spatialaudio)
      --spatialaudio-headphones, --no-spatialaudio-headphones 
                                 Headphones mode (binaural)
                                 (default disabled)
          If the output is stereo, render ambisonics with the binaural decoder.
      --hrtf-file=<string>       HRTF file for the binauralization
          Custom HRTF (Head-related transfer function) file in the SOFA format.

 Audio tempo scaler synched with rate (scaletempo)
      --scaletempo-stride=<integer [1 .. 2000]> 
                                 Stride Length
          Length in milliseconds to output each stride
      --scaletempo-overlap=<float [0.000000 .. 1.000000]> 
                                 Overlap Length
          Percentage of stride to overlap
      --scaletempo-search=<integer [0 .. 200]> 
                                 Search Length
          Length in milliseconds to search for best overlap position

 Pitch Shifter (scaletempo_pitch)
      --scaletempo-stride=<integer [1 .. 2000]> 
                                 Stride Length
          Length in milliseconds to output each stride
      --scaletempo-overlap=<float [0.000000 .. 1.000000]> 
                                 Overlap Length
          Percentage of stride to overlap
      --scaletempo-search=<integer [0 .. 200]> 
                                 Search Length
          Length in milliseconds to search for best overlap position
      --pitch-shift=<float [-12.000000 .. 12.000000]> 
                                 Pitch Shift
          Pitch shift in semitones.

 Secret Rabbit Code (libsamplerate) resampler (samplerate)
      --src-converter-type={0 (Sinc function (best quality)), 1 (Sinc function (medium quality)), 2 (Sinc function (fast)), 3 (Zero Order Hold (fastest)), 4 (Linear (fastest))} 
                                 Sample rate converter type
          Different resampling algorithms are supported. The best one is
          slower, while the fast one exhibits low quality.

 Audio channel remapper (remap)
      --aout-remap-channel-left={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Left
          Left
      --aout-remap-channel-center={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Center
          Center
      --aout-remap-channel-right={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Right
          Right
      --aout-remap-channel-rearleft={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Rear left
          Rear left
      --aout-remap-channel-rearcenter={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Rear center
          Rear center
      --aout-remap-channel-rearright={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Rear right
          Rear right
      --aout-remap-channel-middleleft={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Side left
          Side left
      --aout-remap-channel-middleright={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Side right
          Side right
      --aout-remap-channel-lfe={0 (Left), 1 (Center), 2 (Right), 3 (Rear left), 4 (Rear center), 5 (Rear right), 6 (Side left), 7 (Side right), 8 (Low-frequency effects)} 
                                 Low-frequency effects
          Low-frequency effects
      --aout-remap-normalize, --no-aout-remap-normalize 
                                 Normalize channels
                                 (default enabled)
          When mapping more than one channel to a single output channel,
          normalize the output accordingly.

 Parametric Equalizer (param_eq)
      --param-eq-lowf=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Low freq (Hz)
      --param-eq-lowgain=<float [-20.000000 .. 20.000000]> 
                                 Low freq gain (dB)
      --param-eq-highf=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 High freq (Hz)
      --param-eq-highgain=<float [-20.000000 .. 20.000000]> 
                                 High freq gain (dB)
      --param-eq-f1=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Freq 1 (Hz)
      --param-eq-gain1=<float [-20.000000 .. 20.000000]> 
                                 Freq 1 gain (dB)
      --param-eq-q1=<float [0.100000 .. 100.000000]> 
                                 Freq 1 Q
      --param-eq-f2=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Freq 2 (Hz)
      --param-eq-gain2=<float [-20.000000 .. 20.000000]> 
                                 Freq 2 gain (dB)
      --param-eq-q2=<float [0.100000 .. 100.000000]> 
                                 Freq 2 Q
      --param-eq-f3=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Freq 3 (Hz)
      --param-eq-gain3=<float [-20.000000 .. 20.000000]> 
                                 Freq 3 gain (dB)
      --param-eq-q3=<float [0.100000 .. 100.000000]> 
                                 Freq 3 Q

 Volume normalizer (normvol)
      --norm-buff-size=<integer> Number of audio buffers
          This is the number of audio buffers on which the power measurement is
          made. A higher number of buffers will increase the response time of
          the filter to a spike but will make it less sensitive to short
          variations.
      --norm-max-level=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Maximal volume level
          If the average power over the last N buffers is higher than this
          value, the volume will be normalized. This value is a positive
          floating point number. A value between 0.5 and 10 seems sensible.

 Stereo to mono downmixer (mono)
      --sout-mono-downmix, --no-sout-mono-downmix 
                                 Use downmix algorithm
                                 (default enabled)
          This option selects a stereo to mono downmix algorithm that is used
          in the headphone channel mixer. It gives the effect of standing in a
          room full of speakers.
      --sout-mono-channel={0 (Left), 1 (Right), 4 (Rear left), 5 (Rear right), 7 (Center), 8 (Low-frequency effects), 2 (Side left), 3 (Side right), 6 (Rear center)} 
                                 Select channel to keep
          This option silences all other channels except the selected channel.

 Headphone virtual spatialization effect (headphone)
 This effect gives you the feeling that you are standing in a room with a complete 7.1 speaker set when using only a headphone, providing a more realistic sound experience. It should also be more comfortable and less tiring when listening to music for long periods of time.
It works with any source format from mono to 7.1.
      --headphone-dim=<integer>  Characteristic dimension
          Distance between front left speaker and listener in meters.
      --headphone-compensate, --no-headphone-compensate 
                                 Compensate delay
                                 (default disabled)
          The delay which is introduced by the physical algorithm may sometimes
          be disturbing for the synchronization between lips-movement and
          speech. In case, turn this on to compensate.
      --headphone-dolby, --no-headphone-dolby 
                                 No decoding of Dolby Surround
                                 (default disabled)
          Dolby Surround encoded streams won't be decoded before being
          processed by this filter. Enabling this setting is not recommended.

 Gain control filter (gain)
      --gain-value=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Gain multiplier
          Increase or decrease the gain (default 1.0)

 Equalizer with 10 bands (equalizer)
      --equalizer-preset={flat,classical,club,dance,fullbass,fullbasstreble,fulltreble,headphones,largehall,live,party,pop,reggae,rock,ska,soft,softrock,techno} 
                                 Equalizer preset
          Preset to use for the equalizer.
      --equalizer-bands=<string> Bands gain
          Don't use presets, but manually specified bands. You need to provide
          10 values between -20dB and 20dB, separated by spaces, e.g. "0 2 4 2
          0 -2 -4 -2 0 2".
      --equalizer-2pass, --no-equalizer-2pass 
                                 Two pass
                                 (default disabled)
          Filter the audio twice. This provides a more intense effect.
      --equalizer-vlcfreqs, --no-equalizer-vlcfreqs 
                                 Use VLC frequency bands
                                 (default enabled)
          Use the VLC frequency bands. Otherwise, use the ISO Standard
          frequency bands.
      --equalizer-preamp=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Global gain
          Set the global gain in dB (-20 ... 20).

 Dynamic range compressor (compressor)
      --compressor-rms-peak=<float [0.000000 .. 1.000000]> 
                                 RMS/peak
          Set the RMS/peak.
      --compressor-attack=<float [1.500000 .. 400.000000]> 
                                 Attack time
          Set the attack time in milliseconds.
      --compressor-release=<float [2.000000 .. 800.000000]> 
                                 Release time
          Set the release time in milliseconds.
      --compressor-threshold=<float [-30.000000 .. 0.000000]> 
                                 Threshold level
          Set the threshold level in dB.
      --compressor-ratio=<float [1.000000 .. 20.000000]> 
                                 Ratio
          Set the ratio (n:1).
      --compressor-knee=<float [1.000000 .. 10.000000]> 
                                 Knee radius
          Set the knee radius in dB.
      --compressor-makeup-gain=<float [0.000000 .. 24.000000]> 
                                 Makeup gain
          Set the makeup gain in dB (0 ... 24).

 Sound Delay (chorus_flanger)
 Add a delay effect to the sound
      --delay-time=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Delay time
          Time in milliseconds of the average delay. Note average
      --sweep-depth=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Sweep Depth
          Time in milliseconds of the maximum sweep depth. Thus, the sweep
          range will be delay-time +/- sweep-depth.
      --sweep-rate=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Sweep Rate
          Rate of change of sweep depth in milliseconds shift per second of
          play
      --feedback-gain=<float [-0.900000 .. 0.900000]> 
                                 Feedback gain
          Gain on Feedback loop
      --wet-mix=<float [-0.999000 .. 0.999000]> 
                                 Wet mix
          Level of delayed signal
      --dry-mix=<float [-0.999000 .. 0.999000]> 
                                 Dry Mix
          Level of input signal

 Audio part of the BarGraph function (audiobargraph_a)
      --audiobargraph_a-bargraph=<integer> 
                                 Defines if BarGraph information should be sent
          Defines if BarGraph information should be sent. 1 if the information
          should be sent, 0 otherwise (default 1).
      --audiobargraph_a-bargraph_repetition=<integer> 
                                 Sends the barGraph information every n audio
                                 packets
          Defines how often the barGraph information should be sent. Sends the
          barGraph information every n audio packets (default 4).
      --audiobargraph_a-silence=<integer> 
                                 Defines if silence alarm information should be
                                 sent
          Defines if silence alarm information should be sent. 1 if the
          information should be sent, 0 otherwise (default 1).
      --audiobargraph_a-time_window=<integer> 
                                 Time window to use in ms
          Time Window during when the audio level is measured in ms for silence
          detection. If the audio level is under the threshold during this
          time, an alarm is sent (default 5000).
      --audiobargraph_a-alarm_threshold=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Minimum Audio level to raise the alarm
          Threshold to be attained to raise an alarm. If the audio level is
          under the threshold during this time, an alarm is sent (default 0.1).
      --audiobargraph_a-repetition_time=<integer> 
                                 Time between two alarm messages in ms
          Time between two alarm messages in ms. This value is used to avoid
          alarm saturation (default 2000).

 UDP stream output (udp)
      --sout-udp-caching=<integer> 
                                 Caching value (ms)
          Default caching value for outbound UDP streams. This value should be
          set in milliseconds.
      --sout-udp-group=<integer> Group packets
          Packets can be sent one by one at the right time or by groups. You
          can choose the number of packets that will be sent at a time. It
          helps reducing the scheduling load on heavily-loaded systems.

 IceCAST output (access_output_shout)
      --sout-shout-name=<string> Stream name
          Name to give to this stream/channel on the shoutcast/icecast server.
      --sout-shout-description=<string> 
                                 Stream description
          Description of the stream content or information about your channel.
      --sout-shout-mp3, --no-sout-shout-mp3 
                                 Stream MP3
                                 (default disabled)
          You normally have to feed the shoutcast module with Ogg streams. It
          is also possible to stream MP3 instead, so you can forward MP3
          streams to the shoutcast/icecast server.
      --sout-shout-genre=<string> 
                                 Genre description
          Genre of the content.
      --sout-shout-url=<string>  URL description
          URL with information about the stream or your channel.
      --sout-shout-bitrate=<string> 
                                 Bitrate
          Bitrate information of the transcoded stream.
      --sout-shout-samplerate=<string> 
                                 Samplerate
          Samplerate information of the transcoded stream.
      --sout-shout-channels=<string> 
                                 Number of channels
          Number of channels information of the transcoded stream.
      --sout-shout-quality=<string> 
                                 Ogg Vorbis Quality
          Ogg Vorbis Quality information of the transcoded stream.
      --sout-shout-public, --no-sout-shout-public 
                                 Stream public
                                 (default disabled)
          Make the server publicly available on the 'Yellow Pages' (directory
          listing of streams) on the icecast/shoutcast website. Requires the
          bitrate information specified for shoutcast. Requires Ogg streaming
          for icecast.

 HTTP Live streaming output (access_output_livehttp)
      --sout-livehttp-seglen=<integer> 
                                 Segment length
          Length of TS stream segments
      --sout-livehttp-numsegs=<integer> 
                                 Number of segments
          Number of segments to include in index
      --sout-livehttp-initial-segment-number=<integer> 
                                 Number of first segment
          The number of the first segment generated
      --sout-livehttp-splitanywhere, --no-sout-livehttp-splitanywhere 
                                 Split segments anywhere
                                 (default disabled)
          Don't require a keyframe before splitting a segment. Needed for audio
          only.
      --sout-livehttp-delsegs, --no-sout-livehttp-delsegs 
                                 Delete segments
                                 (default enabled)
          Delete segments when they are no longer needed
      --sout-livehttp-ratecontrol, --no-sout-livehttp-ratecontrol 
                                 Use muxers rate control mechanism
                                 (default disabled)
          Use muxers rate control mechanism
      --sout-livehttp-caching, --no-sout-livehttp-caching 
                                 Allow cache
                                 (default disabled)
          Add EXT-X-ALLOW-CACHE:NO directive in playlist-file if this is
          disabled
      --sout-livehttp-generate-iv, --no-sout-livehttp-generate-iv 
                                 Use randomized IV for encryption
                                 (default disabled)
          Generate IV instead using segment-number as IV
      --sout-livehttp-index=<string> 
                                 Index file
          Path to the index file to create
      --sout-livehttp-index-url=<string> 
                                 Full URL to put in index file
          Full URL to put in index file. Use #'s to represent segment number
      --sout-livehttp-key-uri=<string> 
                                 AES key URI to place in playlist
          AES key URI to place in playlist
      --sout-livehttp-key-file=<string> 
                                 AES key file
          File containing the 16 bytes encryption key
      --sout-livehttp-key-loadfile=<string> 
                                 File where vlc reads key-uri and
                                 keyfile-location
          File is read when segment starts and is assumed to be in format:
          key-uri\nkey-file. File is read on the segment opening and values are
          used on that segment.

 HTTP stream output (http)
      --sout-http-user=<string>  Username
          Username that will be requested to access the stream.
      --sout-http-pwd=<string>   Password
          Password that will be requested to access the stream.
      --sout-http-mime=<string>  Mime
          MIME returned by the server (autodetected if not specified).
      --sout-http-metacube, --no-sout-http-metacube 
                                 Metacube
                                 (default disabled)
          Use the Metacube protocol. Needed for streaming to the Cubemap
          reflector.

 File stream output (file)
      --sout-file-overwrite, --no-sout-file-overwrite 
                                 Overwrite existing file
                                 (default enabled)
          If the file already exists, it will be overwritten.
      --sout-file-append, --no-sout-file-append 
                                 Append to file
                                 (default disabled)
          Append to file if it exists instead of replacing it.
      --sout-file-format, --no-sout-file-format 
                                 Format time and date
                                 (default disabled)
          Perform ISO C time and date formatting on the file path

 VNC client access (vnc)
      --rfb-user=<string>        Username
          Username
      --rfb-password=<string>    Password
          Password
      --rfb-x509-ca=<string>     X.509 Certificate Authority
          Certificate of the Authority to verify server's against
      --rfb-x509-crl=<string>    X.509 Certificate Revocation List
          List of revoked servers certificates
      --rfb-x509-client-cert=<string> 
                                 X.509 Client certificate
          Certificate for client authentication
      --rfb-x509-client-key=<string> 
                                 X.509 Client private key
          Private key for authentication by certificate
      --rfb-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frame rate
          How many times the screen content should be refreshed per second.
      --rfb-chroma={RV32,RV24,RV16,RGB8} 
                                 Frame buffer depth
          RGB chroma (RV32, RV24, RV16, RGB2)
      --rfb-compress-level=<integer [0 .. 9]> 
                                 Compression level
          Transfer compression level from 0 (none) to 9 (max)
      --rfb-quality-level=<integer [1 .. 9]> 
                                 Image quality
          Image quality 1 to 9 (max)

 VDR recordings (vdr)
 Support for VDR recordings (http://www.tvdr.de/).
      --vdr-chapter-offset=<integer> 
                                 Chapter offset in ms
          Move all chapters. This value should be set in milliseconds.
      --vdr-fps=<float [1.000000 .. 1000.000000]> 
                                 Frame rate
          Default frame rate for chapter import.

 UDP input (udp)
      --udp-timeout=<integer>    UDP Source timeout (sec)

 Time code subpicture elementary stream generator (timecode)
      --timecode-fps={24/1,25/1,30000/1001,30/1} 
                                 Frame rate
          Frame rate

 SMB input (smb)
 Samba (Windows network shares) input
      --smb-user=<string>        Username
          Username that will be used for the connection, if no username is set
          in the URL.
      --smb-pwd=<string>         Password
          Password that will be used for the connection, if no username or
          password are set in URL.
      --smb-domain=<string>      SMB domain
          Domain/Workgroup that will be used for the connection.

 Shared memory framebuffer (shm)
      --shm-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frame rate
          How many times the screen content should be refreshed per second.
      --shm-depth={0 (XWD file (autodetect)), 8 (8 bits), 15 (15 bits), 16 (16 bits), 24 (24 bits), 32 (32 bits)} 
                                 Frame buffer depth
          Pixel depth of the frame buffer, or zero for XWD file
      --shm-width=<integer [0 .. 65535]> 
                                 Frame buffer width
          Pixel width of the frame buffer (ignored for XWD file)
      --shm-height=<integer [0 .. 65535]> 
                                 Frame buffer height
          Pixel height of the frame buffer (ignored for XWD file)
      --shm-file=<string>        Frame buffer file
          Path of the memory mapped file of the frame buffer

 SFTP input (sftp)
      --sftp-port=<integer>      SFTP port
          SFTP port number to use on the server
      --sftp-user=<string>       Username
          Username that will be used for the connection, if no username is set
          in the URL.
      --sftp-pwd=<string>        Password
          Password that will be used for the connection, if no username or
          password are set in URL.

 Screen Input (screen)
      --screen-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Frame rate
          Desired frame rate for the capture.
      --screen-top=<integer>     Region top row
          Ordinate of the capture region in pixels.
      --screen-left=<integer>    Region left column
          Abscissa of the capture region in pixels.
      --screen-width=<integer>   Capture region width
          Capture region width
      --screen-height=<integer>  Capture region height
          Capture region height
      --screen-follow-mouse, --no-screen-follow-mouse 
                                 Follow the mouse
                                 (default disabled)
          Follow the mouse when capturing a subscreen.
      --screen-mouse-image=<string> 
                                 Mouse pointer image
          If specified, will use the image to draw the mouse pointer on the
          capture.
      --screen-fragment-size=<integer> 
                                 Capture fragment size
          Optimize the capture by fragmenting the screen in chunks of
          predefined height (16 might be a good value, and 0 means disabled).

 SAT>IP Receiver Plugin (satip)
      --satip-buffer=<integer>   Receive buffer
          UDP receive buffer size (bytes)
      --satip-multicast, --no-satip-multicast 
                                 Request multicast stream
                                 (default disabled)
          Request server to send stream as multicast
      --satip-host=<string>      Host
          Host

 Real-Time Protocol (RTP) input (rtp)
      --rtcp-port=<integer [0 .. 65535]> 
                                 RTCP (local) port
          RTCP packets will be received on this transport protocol port. If
          zero, multiplexed RTP/RTCP is used.
      --srtp-key=<string>        SRTP key (hexadecimal)
          RTP packets will be authenticated and deciphered with this Secure RTP
          master shared secret key. This must be a 32-character-long
          hexadecimal string.
      --srtp-salt=<string>       SRTP salt (hexadecimal)
          Secure RTP requires a (non-secret) master salt value. This must be a
          28-character-long hexadecimal string.
      --rtp-max-src=<integer [1 .. 255]> 
                                 Maximum RTP sources
          How many distinct active RTP sources are allowed at a time.
      --rtp-timeout=<integer>    RTP source timeout (sec)
          How long to wait for any packet before a source is expired.
      --rtp-max-dropout=<integer [0 .. 32767]> 
                                 Maximum RTP sequence number dropout
          RTP packets will be discarded if they are too much ahead (i.e. in the
          future) by this many packets from the last received packet.
      --rtp-max-misorder=<integer [0 .. 32767]> 
                                 Maximum RTP sequence number misordering
          RTP packets will be discarded if they are too far behind (i.e. in the
          past) by this many packets from the last received packet.
      --rtp-dynamic-pt={theora}  RTP payload format assumed for dynamic
                                 payloads
          This payload format will be assumed for dynamic payload types
          (between 96 and 127) if it can't be determined otherwise with
          out-of-band mappings (SDP)

 NFS input (nfs)
      --nfs-auto-guid, --no-nfs-auto-guid 
                                 Set NFS uid/guid automatically
                                 (default enabled)
          If uid/gid are not specified in the url, VLC will automatically set a
          uid/gid.

 RTP/RTSP/SDP demuxer (using Live555) (live555)
      --rtsp-tcp, --no-rtsp-tcp  Use RTP over RTSP (TCP)
                                 (default disabled)
          Use RTP over RTSP (TCP)
      --rtp-client-port=<integer> 
                                 Client port
          Port to use for the RTP source of the session
      --rtsp-mcast, --no-rtsp-mcast 
                                 Force multicast RTP via RTSP
                                 (default disabled)
          Force multicast RTP via RTSP
      --rtsp-http, --no-rtsp-http 
                                 Tunnel RTSP and RTP over HTTP
                                 (default disabled)
          Tunnel RTSP and RTP over HTTP
      --rtsp-http-port=<integer> HTTP tunnel port
          Port to use for tunneling the RTSP/RTP over HTTP.
      --rtsp-kasenna, --no-rtsp-kasenna 
                                 Kasenna RTSP dialect
                                 (default disabled)
          Kasenna servers use an old and nonstandard dialect of RTSP. With this
          parameter VLC will try this dialect, but then it cannot connect to
          normal RTSP servers.
      --rtsp-wmserver, --no-rtsp-wmserver 
                                 WMServer RTSP dialect
                                 (default disabled)
          WMServer uses a nonstandard dialect of RTSP. Selecting this parameter
          will tell VLC to assume some options contrary to RFC 2326 guidelines.
      --rtsp-user=<string>       Username
          Sets the username for the connection, if no username or password are
          set in the url.
      --rtsp-pwd=<string>        Password
          Sets the password for the connection, if no username or password are
          set in the url.
      --rtsp-frame-buffer-size=<integer> 
                                 RTSP frame buffer size
          RTSP start frame buffer size of the video track, can be increased in
          case of broken pictures due to too small buffer.

 Blu-ray Disc support (libbluray) (libbluray)
      --bluray-menu, --no-bluray-menu 
                                 Blu-ray menus
                                 (default enabled)
          Use Blu-ray menus. If disabled, the movie will start directly
      --bluray-region={A,B,C}    Region code
          Blu-Ray player region code. Some discs can be played only with a
          correct region code.

 HTTP input (http)
      --http-reconnect, --no-http-reconnect 
                                 Auto re-connect
                                 (default disabled)
          Automatically try to reconnect to the stream in case of a sudden
          disconnect.

 HTTPS input (access)
      --http-continuous, --no-http-continuous 
                                 Continuous stream
                                 (default disabled)
          Keep reading a resource that keeps being updated.
      --http-forward-cookies, --no-http-forward-cookies 
                                 Cookies forwarding
                                 (default enabled)
          Forward cookies across HTTP redirections.
      --http-referrer=<string>   Referrer
          Provide the referral URL, i.e. HTTP "Referer" (sic).
      --http-user-agent=<string> User agent
          Override the name and version of the application as provided to the
          HTTP server, i.e. the HTTP "User-Agent". Name and version must be
          separated by a forward slash, e.g. "FooBar/1.2.3".

 FTP input (ftp)
      --ftp-user=<string>        Username
          Username that will be used for the connection, if no username is set
          in the URL.
      --ftp-pwd=<string>         Password
          Password that will be used for the connection, if no username or
          password are set in URL.
      --ftp-account=<string>     FTP account
          Account that will be used for the connection.

 File input (filesystem)
   Directory:
      --list-special-files, --no-list-special-files 
                                 List special files
                                 (default disabled)
          Include devices and pipes when listing directories

 DVDRead Input (no menu support) (dvdread)
      --dvdread-angle=<integer>  DVD angle
          Default DVD angle.

 DVDnav Input (dvdnav)
      --dvdnav-angle=<integer>   DVD angle
          Default DVD angle.
      --dvdnav-menu, --no-dvdnav-menu 
                                 Start directly in menu
                                 (default enabled)
          Start the DVD directly in the main menu. This will try to skip all
          the useless warning introductions.

 Digital Television and Radio (dtv)
      --dvb-adapter=<integer>    DVB adapter
          If there is more than one digital broadcasting adapter, the adapter
          number must be selected. Numbering starts from zero.
      --dvb-network-name=<string> 
                                 Network name
          Unique network name in the System Tuning Spaces
      --dvb-create-name=<string> Network name to create
          Create unique name in the System Tuning Spaces
      --dvb-frequency=<integer [0 .. 107999999]> 
                                 Frequency (Hz)
          TV channels are grouped by transponder (a.k.a. multiplex) on a given
          frequency. This is required to tune the receiver.
      --dvb-inversion={-1 (Automatic), 0 (Off), 1 (On)} 
                                 Spectrum inversion
          If the demodulator cannot detect spectral inversion correctly, it
          needs to be configured manually.
   Terrestrial reception parameters:
      --dvb-bandwidth={0 (Automatic), 10 (10 MHz), 8 (8 MHz), 7 (7 MHz), 6 (6 MHz), 5 (5 MHz), 2 (1.712 MHz)} 
                                 Bandwidth (MHz)
          Bandwidth (MHz)
      --dvb-transmission={-1 (Automatic), 1 (1k), 2 (2k), 4 (4k), 8 (8k), 16 (16k), 32 (32k)} 
                                 Transmission mode
          Transmission mode
      --dvb-guard={,1/128,1/32,1/16,19/256,1/8,19/128,1/4} 
                                 Guard interval
          Guard interval
   DVB-T reception parameters:
      --dvb-code-rate-hp={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 High-priority code rate
          The code rate for Forward Error Correction can be specified.
      --dvb-code-rate-lp={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 Low-priority code rate
          The code rate for Forward Error Correction can be specified.
      --dvb-hierarchy={-1 (Automatic), 0 (None), 1 (1), 2 (2), 4 (4)} 
                                 Hierarchy mode
          Hierarchy mode
      --dvb-plp-id=<integer [0 .. 255]> 
                                 DVB-T2 Physical Layer Pipe
          DVB-T2 Physical Layer Pipe
   ISDB-T reception parameters:
      --dvb-a-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK} 
                                 Layer A modulation
          The digital signal can be modulated according with different
          constellations (depending on the delivery system). If the demodulator
          cannot detect the constellation automatically, it needs to be
          configured manually.
      --dvb-a-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 Layer A code rate
          The code rate for Forward Error Correction can be specified.
      --dvb-a-count=<integer [0 .. 13]> 
                                 Layer A segments count
      --dvb-a-interleaving=<integer [0 .. 3]> 
                                 Layer A time interleaving
      --dvb-b-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK} 
                                 Layer B modulation
          The digital signal can be modulated according with different
          constellations (depending on the delivery system). If the demodulator
          cannot detect the constellation automatically, it needs to be
          configured manually.
      --dvb-b-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 Layer B code rate
          The code rate for Forward Error Correction can be specified.
      --dvb-b-count=<integer [0 .. 13]> 
                                 Layer B segments count
      --dvb-b-interleaving=<integer [0 .. 3]> 
                                 Layer B time interleaving
      --dvb-c-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK} 
                                 Layer C modulation
          The digital signal can be modulated according with different
          constellations (depending on the delivery system). If the demodulator
          cannot detect the constellation automatically, it needs to be
          configured manually.
      --dvb-c-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 Layer C code rate
          The code rate for Forward Error Correction can be specified.
      --dvb-c-count=<integer [0 .. 13]> 
                                 Layer C segments count
      --dvb-c-interleaving=<integer [0 .. 3]> 
                                 Layer C time interleaving
   Cable and satellite reception parameters:
      --dvb-modulation={,QAM,16QAM,32QAM,64QAM,128QAM,256QAM,8VSB,16VSB,QPSK,DQPSK,8PSK,16APSK,32APSK} 
                                 Modulation / Constellation
          The digital signal can be modulated according with different
          constellations (depending on the delivery system). If the demodulator
          cannot detect the constellation automatically, it needs to be
          configured manually.
      --dvb-srate=<integer [0 .. 4294967295]> 
                                 Symbol rate (bauds)
          The symbol rate must be specified manually for some systems, notably
          DVB-C, DVB-S and DVB-S2.
      --dvb-fec={,0,1/2,3/5,2/3,3/4,4/5,5/6,6/7,7/8,8/9,9/10} 
                                 FEC code rate
          The code rate for Forward Error Correction can be specified.
   DVB-S2 parameters:
      --dvb-stream=<integer [0 .. 255]> 
                                 Stream identifier
          Stream identifier
      --dvb-pilot={-1 (Automatic), 0 (Off), 1 (On)} 
                                 Pilot
          Pilot
      --dvb-rolloff={-1 (Automatic), 35 (0.35 (same as DVB-S)), 20 (0.20), 25 (0.25)} 
                                 Roll-off factor
          Roll-off factor
   ISDB-S parameters:
      --dvb-ts-id=<integer [0 .. 65535]> 
                                 Transport stream ID
          Transport stream ID
   Satellite equipment control:
      --dvb-polarization={,V,H,R,L} 
                                 Polarization (Voltage)
          To select the polarization of the transponder, a different voltage is
          normally applied to the low noise block-downconverter (LNB).
      --dvb-voltage=<integer [0 .. 18]> 
                                 
      --dvb-lnb-low=<integer [0 .. 2147483647]> 
                                 Local oscillator low frequency (kHz)
          The downconverter (LNB) will subtract the local oscillator frequency
          from the satellite transmission frequency. The intermediate frequency
          (IF) on the RF cable is the result.
      --dvb-lnb-high=<integer [0 .. 2147483647]> 
                                 Local oscillator high frequency (kHz)
          The downconverter (LNB) will subtract the local oscillator frequency
          from the satellite transmission frequency. The intermediate frequency
          (IF) on the RF cable is the result.
      --dvb-lnb-switch=<integer [0 .. 2147483647]> 
                                 Universal LNB switch frequency (kHz)
          If the satellite transmission frequency exceeds the switch frequency,
          the oscillator high frequency will be used as reference. Furthermore
          the automatic continuous 22kHz tone will be sent.
      --dvb-network-id=<integer> Network identifier
          Network identifier
      --dvb-azimuth=<integer>    Satellite azimuth
          Satellite azimuth in tenths of degree
      --dvb-elevation=<integer>  Satellite elevation
          Satellite elevation in tenths of degree
      --dvb-longitude=<integer>  Satellite longitude
          Satellite longitude in tenths of degree. West is negative.
      --dvb-range=<string>       Satellite range code
          Satellite range code as defined by manufacturer e.g. DISEqC switch
          code
   ATSC reception parameters:
      --dvb-major-channel=<integer> 
                                 Major channel
      --dvb-minor-channel=<integer> 
                                 ATSC minor channel
      --dvb-physical-channel=<integer> 
                                 Physical channel

 DirectShow input (dshow)
      --dshow-vdev={,none,screen-capture-recorder} 
                                 Video device name
          Name of the video device that will be used by the DirectShow plugin.
          If you don't specify anything, the default device will be used.
      --dshow-adev={,none,Aux (ASUS Xonar DG Audio Device),CABLE Output (VB-Audio Virtual Cable),Line In (ASUS Xonar DG Audio Device),Microphone (ASUS Xonar DG Audio Device),Stereo Mix (ASUS Xonar DG Audio Device),Wave (ASUS Xonar DG Audio Device),virtual-audio-capturer} 
                                 Audio device name
          Name of the audio device that will be used by the DirectShow plugin.
          If you don't specify anything, the default device will be used.
      --dshow-size=<string>      Video size
          Size of the video that will be displayed by the DirectShow plugin. If
          you don't specify anything the default size for your device will be
          used. You can specify a standard size (cif, d1, ...) or
          <width>x<height>.
      --dshow-aspect-ratio=<string> 
                                 Picture aspect-ratio n:m
          Define input picture aspect-ratio to use. Default is 4:3
      --dshow-chroma=<string>    Video input chroma format
          Force the DirectShow video input to use a specific chroma format (eg.
          I420 (default), RV24, etc.)
      --dshow-fps=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Video input frame rate
          Force the DirectShow video input to use a specific frame rate (eg. 0
          means default, 25, 29.97, 50, 59.94, etc.)
      --dshow-config, --no-dshow-config 
                                 Device properties
                                 (default disabled)
          Show the properties dialog of the selected device before starting the
          stream.
      --dshow-tuner, --no-dshow-tuner 
                                 Tuner properties
                                 (default disabled)
          Show the tuner properties [channel selection] page.
      --dshow-tuner-channel=<integer> 
                                 Tuner TV Channel
          Set the TV channel the tuner will set to (0 means default).
      --dshow-tuner-frequency=<integer> 
                                 Tuner Frequency
          This overrides the channel. Measured in Hz.
      --dshow-tuner-country=<integer> 
                                 Tuner country code
          Set the tuner country code that establishes the current
          channel-to-frequency mapping (0 means default).
      --dshow-tuner-standard={0 (Default), 1 (NTSC_M), 2 (NTSC_M_J), 4 (NTSC_443), 16 (PAL_B), 32 (PAL_D), 64 (PAL_G), 128 (PAL_H), 256 (PAL_I), 512 (PAL_M), 1024 (PAL_N), 2048 (PAL_60), 4096 (SECAM_B), 8192 (SECAM_D), 16384 (SECAM_G), 32768 (SECAM_H), 65536 (SECAM_K), 131072 (SECAM_K1), 262144 (SECAM_L), 524288 (SECAM_L1), 1048576 (PAL_N_COMBO)} 
                                 Video standard
          Video standard
      --dshow-tuner-input={0 (Default), 1 (Cable), 2 (Antenna)} 
                                 Tuner input type
          Select the tuner input type (Cable/Antenna).
      --dshow-video-input=<integer> 
                                 Video input pin
          Select the video input source, such as composite, s-video, or tuner.
          Since these settings are hardware-specific, you should find good
          settings in the "Device config" area, and use those numbers here. -1
          means that settings will not be changed.
      --dshow-video-output=<integer> 
                                 Video output pin
          Select the video output type. See the "video input" option.
      --dshow-audio-input=<integer> 
                                 Audio input pin
          Select the audio input source. See the "video input" option.
      --dshow-audio-output=<integer> 
                                 Audio output pin
          Select the audio output type. See the "video input" option.
      --dshow-amtuner-mode={0 (Default), 1 (TV), 2 (FM radio), 4 (AM radio), 8 (DSS)} 
                                 AM Tuner mode
          AM Tuner mode. Can be one of Default (0), TV (1), AM Radio (2), FM
          Radio (3) or DSS (4).
      --dshow-audio-channels=<integer> 
                                 Number of audio channels
          Select audio input format with the given number of audio channels (if
          non 0)
      --dshow-audio-samplerate=<integer> 
                                 Audio sample rate
          Select audio input format with the given sample rate (if non 0)
      --dshow-audio-bitspersample=<integer> 
                                 Audio bits per sample
          Select audio input format with the given bits/sample (if non 0)

 Digital Cinema Package module (dcp)
      --kdm=<string>             KDM file
          Path to Key Delivery Message XML file

 Audio CD input (cdda)
      --cd-audio=<string>        Audio CD device
          This is the default Audio CD drive (or file) to use. Don't forget the
          colon after the drive letter (e.g. D:)

 [cdda:][device][@[track]]
      --cdda-track=<integer>     
      --cdda-first-sector=<integer> 
                                 
      --cdda-last-sector=<integer> 
                                 
      --cddb-server=<string>     CDDB Server
          Address of the CDDB server to use.
      --cddb-port=<integer [1 .. 65535]> 
                                 CDDB port
          CDDB Server port to use.

 Windows Audio Session API input (wasapi)
      --wasapi-loopback, --no-wasapi-loopback 
                                 Loopback mode
                                 (default disabled)
          Record an audio rendering endpoint.

 Microsoft Media Server (MMS) input (access_mms)
      --mms-timeout=<integer>    TCP/UDP timeout (ms)
          Amount of time (in ms) to wait before aborting network reception of
          data. Note that there will be 10 retries before completely giving up.
      --mms-all, --no-mms-all    Force selection of all streams
                                 (default disabled)
          MMS streams can contain several elementary streams, with different
          bitrates. You can choose to select all of them.
      --mms-maxbitrate=<integer> Maximum bitrate
          Select the stream with the maximum bitrate under that limit.

 Memory input (imem)
      --imem-get=<string>        Get function
          Address of the get callback function
      --imem-release=<string>    Release function
          Address of the release callback function
      --imem-cookie=<string>     Callback cookie string
          Text identifier for the callback functions
      --imem-data=<string>       Callback data
          Data for the get and release functions
      --imem-id=<integer>        ID
          Set the ID of the elementary stream
      --imem-group=<integer>     Group
          Set the group of the elementary stream
      --imem-cat={0 (Unknown), 1 (Audio), 2 (Video), 3 (Subtitle), 4 (Data)} 
                                 Category
          Set the category of the elementary stream
      --imem-codec=<string>      Codec
          Set the codec of the elementary stream
      --imem-language=<string>   Language
          Language of the elementary stream as described by ISO639
      --imem-samplerate=<integer> 
                                 Sample rate
          Sample rate of an audio elementary stream
      --imem-channels=<integer>  Channels count
          Channels count of an audio elementary stream
      --imem-width=<integer>     Width
          Width of video or subtitle elementary streams
      --imem-height=<integer>    Height
          Height of video or subtitle elementary streams
      --imem-dar=<string>        Display aspect ratio
          Display aspect ratio of a video elementary stream
      --imem-fps=<string>        Frame rate
          Frame rate of a video elementary stream
      --imem-size=<integer>      Size
          Size of stream in bytes

 Concatenated inputs (concat)
      --concat-list=<string>     Inputs list
          Comma-separated list of input URLs to concatenate.

 core program (core)

 Audio
 These options allow you to modify the behavior of the audio subsystem, and to add audio filters which can be used for post processing or visual effects (spectrum analyzer, etc.). Enable these filters here, and configure them in the "audio filters" modules section.
      --audio, --no-audio        Enable audio
                                 (default enabled)
          You can completely disable the audio output. The audio decoding stage
          will not take place, thus saving some processing power.
      --gain=<float [0.000000 .. 8.000000]> 
                                 Audio gain
          This linear gain will be applied to outputted audio.
      --volume-step=<float [1.000000 .. 256.000000]> 
                                 Audio output volume step
          The step size of the volume is adjustable using this option.
      --volume-save, --no-volume-save 
                                 Remember the audio volume
                                 (default enabled)
          Remember the audio volume
      --spdif, --no-spdif        Force S/PDIF support
                                 (default disabled)
          This option should be used when the audio output can't negotiate
          S/PDIF support.
      --force-dolby-surround={0 (Auto), 1 (On), 2 (Off)} 
                                 Force detection of Dolby Surround
          Use this when you know your stream is (or is not) encoded with Dolby
          Surround but fails to be detected as such. Even if the stream is not
          actually encoded with Dolby Surround, turning on this option might
          enhance your experience, especially when combined with the Headphone
          Channel Mixer.
      --stereo-mode={0 (Unset), 1 (Stereo), 2 (Reverse stereo), 3 (Left), 4 (Right), 5 (Dolby Surround), 6 (Headphones)} 
                                 Stereo audio output mode
          Stereo audio output mode
      --audio-desync=<integer>   Audio desynchronization compensation
          This delays the audio output. The delay must be given in
          milliseconds. This can be handy if you notice a lag between the video
          and the audio.
      --audio-replay-gain-mode={none,track,album} 
                                 Replay gain mode
          Select the replay gain mode
      --audio-replay-gain-preamp=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Replay preamp
          This allows you to change the default target level (89 dB) for stream
          with replay gain information
      --audio-replay-gain-default=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Default replay gain
          This is the gain used for stream without replay gain information
      --audio-replay-gain-peak-protection, --no-audio-replay-gain-peak-protection 
                                 Peak protection
                                 (default enabled)
          Protect against sound clipping
      --audio-time-stretch, --no-audio-time-stretch 
                                 Enable time stretching audio
                                 (default enabled)
          This allows playing audio at lower or higher speed without affecting
          the audio pitch
  -A, --aout={any,mmdevice,directsound,waveout,amem,afile,adummy,none} 
                                 Audio output module
          This is the audio output method used by VLC. The default behavior is
          to automatically select the best method available.
      --role={video,music,communication,game,notification,animation,production,accessibility,test} 
                                 Media role
          Media (player) role for operating system policy.
      --audio-filter=<string>    Audio filters
          This adds audio post processing filters, to modify the sound
          rendering.
      --audio-visual={any,goom,projectm,visual,glspectrum,none} 
                                 Audio visualizations
          This adds visualization modules (spectrum analyzer, etc.).
      --audio-resampler={any,samplerate,ugly,speex_resampler,none} 
                                 Audio resampler
          This selects which plugin to use for audio resampling.

 Video
 These options allow you to modify the behavior of the video output subsystem. You can for example enable video filters (deinterlacing, image adjusting, etc.). Enable these filters here and configure them in the "video filters" modules section. You can also set many miscellaneous video options.
      --video, --no-video        Enable video
                                 (default enabled)
          You can completely disable the video output. The video decoding stage
          will not take place, thus saving some processing power.
      --grayscale, --no-grayscale 
                                 Grayscale video output
                                 (default disabled)
          Output video in grayscale. As the color information aren't decoded,
          this can save some processing power.
  -f, --fullscreen, --no-fullscreen 
                                 Fullscreen video output
                                 (default disabled)
          Start video in fullscreen mode
      --embedded-video, --no-embedded-video 
                                 Embedded video
                                 (default enabled)
          Embed the video output in the main interface.
      --xlib, --no-xlib          
                                 (default enabled)
      --drop-late-frames, --no-drop-late-frames 
                                 Drop late frames
                                 (default enabled)
          This drops frames that are late (arrive to the video output after
          their intended display date).
      --skip-frames, --no-skip-frames 
                                 Skip frames
                                 (default enabled)
          Enables framedropping on MPEG2 stream. Framedropping occurs when your
          computer is not powerful enough
      --quiet-synchro, --no-quiet-synchro 
                                 Quiet synchro
                                 (default disabled)
          This avoids flooding the message log with debug output from the video
          output synchronization mechanism.
      --keyboard-events, --no-keyboard-events 
                                 Key press events
                                 (default enabled)
          This enables VLC hotkeys from the (non-embedded) video window.
      --mouse-events, --no-mouse-events 
                                 Mouse events
                                 (default enabled)
          This enables handling of mouse clicks on the video.
      --video-on-top, --no-video-on-top 
                                 Always on top
                                 (default disabled)
          Always place the video window on top of other windows.
      --video-wallpaper, --no-video-wallpaper 
                                 Enable wallpaper mode
                                 (default disabled)
          The wallpaper mode allows you to display the video as the desktop
          background.
      --disable-screensaver, --no-disable-screensaver 
                                 Disable screensaver
                                 (default enabled)
          Disable the screensaver during video playback.
      --video-title-show, --no-video-title-show 
                                 Show media title on video
                                 (default disabled)
          Display the title of the video on top of the movie.
      --video-title-timeout=<integer> 
                                 Show video title for x milliseconds
          Show the video title for n milliseconds, default is 5000 ms (5 sec.)
      --video-title-position={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Position of video title
          Place on video where to display the title (default bottom center).
      --mouse-hide-timeout=<integer> 
                                 Hide cursor and fullscreen controller after x
                                 milliseconds
          Hide mouse cursor and fullscreen controller after n milliseconds.
   Snapshot:
      --snapshot-path=<string>   Video snapshot directory (or filename)
          Directory where the video snapshots will be stored.
      --snapshot-prefix=<string> Video snapshot file prefix
          Video snapshot file prefix
      --snapshot-format={png,jpg,tiff} 
                                 Video snapshot format
          Image format which will be used to store the video snapshots
      --snapshot-preview, --no-snapshot-preview 
                                 Display video snapshot preview
                                 (default enabled)
          Display the snapshot preview in the screen's top-left corner.
      --snapshot-sequential, --no-snapshot-sequential 
                                 Use sequential numbers instead of timestamps
                                 (default disabled)
          Use sequential numbers instead of timestamps for snapshot numbering
      --snapshot-width=<integer> Video snapshot width
          You can enforce the width of the video snapshot. By default it will
          keep the original width (-1). Using 0 will scale the width to keep
          the aspect ratio.
      --snapshot-height=<integer> 
                                 Video snapshot height
          You can enforce the height of the video snapshot. By default it will
          keep the original height (-1). Using 0 will scale the height to keep
          the aspect ratio.
   Window properties:
      --width=<integer>          Video width
          You can enforce the video width. By default (-1) VLC will adapt to
          the video characteristics.
      --height=<integer>         Video height
          You can enforce the video height. By default (-1) VLC will adapt to
          the video characteristics.
      --video-x=<integer>        Video X coordinate
          You can enforce the position of the top left corner of the video
          window (X coordinate).
      --video-y=<integer>        Video Y coordinate
          You can enforce the position of the top left corner of the video
          window (Y coordinate).
      --crop=<string>            Video cropping
          This forces the cropping of the source video. Accepted formats are
          x:y (4:3, 16:9, etc.) expressing the global image aspect.
      --custom-crop-ratios=<string> 
                                 Custom crop ratios list
          Comma separated list of crop ratios which will be added in the
          interface's crop ratios list.
      --aspect-ratio=<string>    Source aspect ratio
          This forces the source aspect ratio. For instance, some DVDs claim to
          be 16:9 while they are actually 4:3. This can also be used as a hint
          for VLC when a movie does not have aspect ratio information. Accepted
          formats are x:y (4:3, 16:9, etc.) expressing the global image aspect,
          or a float value (1.25, 1.3333, etc.) expressing pixel squareness.
      --autoscale, --no-autoscale 
                                 Video Auto Scaling
                                 (default enabled)
          Let the video scale to fit a given window or fullscreen.
      --monitor-par=<string>     Monitor pixel aspect ratio
          This forces the monitor aspect ratio. Most monitors have square
          pixels (1:1). If you have a 16:9 screen, you might need to change
          this to 4:3 in order to keep proportions.
      --custom-aspect-ratios=<string> 
                                 Custom aspect ratios list
          Comma separated list of aspect ratios which will be added in the
          interface's aspect ratio list.
      --hdtv-fix, --no-hdtv-fix  Fix HDTV height
                                 (default enabled)
          This allows proper handling of HDTV-1080 video format even if broken
          encoder incorrectly sets height to 1088 lines. You should only
          disable this option if your video has a non-standard format requiring
          all 1088 lines.
      --video-deco, --no-video-deco 
                                 Window decorations
                                 (default enabled)
          VLC can avoid creating window caption, frames, etc... around the
          video, giving a "minimal" window.
      --video-title=<string>     Video title
          Custom title for the video window (in case the video is not embedded
          in the interface).
      --align={0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)} 
                                 Video alignment
          Enforce the alignment of the video in its window. By default (0) it
          will be centered (0=center, 1=left, 2=right, 4=top, 8=bottom, you can
          also use combinations of these values, like 6=4+2 meaning top-right).
      --zoom=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Zoom video
          You can zoom the video by the specified factor.
      --deinterlace={0 (Off), -1 (Automatic), 1 (On)} 
                                 Deinterlace
          Deinterlace
      --deinterlace-mode={auto,discard,blend,mean,bob,linear,x,yadif,yadif2x,phosphor,ivtc} 
                                 Deinterlace mode
          Deinterlace method to use for video processing.
  -V, --vout={any,direct3d11,direct3d9,glwin32,gl,directdraw,wingdi,caca,vdummy,vmem,flaschen,yuv,vdummy,none} 
                                 Video output module
          This is the the video output method used by VLC. The default behavior
          is to automatically select the best method available.
      --video-filter=<string>    Video filter module
          This adds post-processing filters to enhance the picture quality, for
          instance deinterlacing, or distort the video.
      --video-splitter=<string>  Video splitter module
          This adds video splitters like clone or wall

 Subpictures
 These options allow you to modify the behavior of the subpictures subsystem. You can for example enable subpictures sources (logo, etc.). Enable these filters here and configure them in the "subsources filters" modules section. You can also set many miscellaneous subpictures options.
   On Screen Display:
      --spu, --no-spu            Enable sub-pictures
                                 (default enabled)
          You can completely disable the sub-picture processing.
      --osd, --no-osd            On Screen Display
                                 (default enabled)
          VLC can display messages on the video. This is called OSD (On Screen
          Display).
      --text-renderer={any,freetype,tdummy,sapi,none} 
                                 Text rendering module
          VLC normally uses Freetype for rendering, but this allows you to use
          svg for instance.
   Subtitles:
      --sub-file=<string>        Use subtitle file
          Load this subtitle file. To be used when autodetect cannot detect
          your subtitle file.
      --sub-autodetect-file, --no-sub-autodetect-file 
                                 Autodetect subtitle files
                                 (default enabled)
          Automatically detect a subtitle file, if no subtitle filename is
          specified (based on the filename of the movie).
      --sub-autodetect-fuzzy=<integer> 
                                 Subtitle autodetection fuzziness
          This determines how fuzzy subtitle and movie filename matching will
          be. Options are: 0 = no subtitles autodetected 1 = any subtitle file
          2 = any subtitle file containing the movie name 3 = subtitle file
          matching the movie name with additional chars 4 = subtitle file
          matching the movie name exactly
      --sub-autodetect-path=<string> 
                                 Subtitle autodetection paths
          Look for a subtitle file in those paths too, if your subtitle file
          was not found in the current directory.
      --sub-margin=<integer>     Force subtitle position
          You can use this option to place the subtitles under the movie,
          instead of over the movie. Try several positions.
      --sub-text-scale=<integer [10 .. 500]> 
                                 Subtitles text scaling factor
          Changes the subtitles size where possible
   Overlays:
      --sub-source=<string>      Subpictures source module
          This adds so-called "subpicture sources". These filters overlay some
          images or text over the video (like a logo, arbitrary text, ...).
      --sub-filter=<string>      Subpictures filter module
          This adds so-called "subpicture filters". These filter subpictures
          created by subtitle decoders or other subpictures sources.
   Track settings:
      --program=<integer>        Program
          Choose the program to select by giving its Service ID. Only use this
          option if you want to read a multi-program stream (like DVB streams
          for example).
      --programs=<string>        Programs
          Choose the programs to select by giving a comma-separated list of
          Service IDs (SIDs). Only use this option if you want to read a
          multi-program stream (like DVB streams for example).
      --audio-track=<integer>    Audio track
          Stream number of the audio track to use (from 0 to n).
      --sub-track=<integer>      Subtitle track
          Stream number of the subtitle track to use (from 0 to n).
      --audio-language=<string>  Audio language
          Language of the audio track you want to use (comma separated, two or
          three letter country code, you may use 'none' to avoid a fallback to
          another language).
      --sub-language=<string>    Subtitle language
          Language of the subtitle track you want to use (comma separated, two
          or three letters country code, you may use 'any' as a fallback).
      --menu-language=<string>   Menu language
          Language of the menus you want to use with DVD/BluRay (comma
          separated, two or three letters country code, you may use 'any' as a
          fallback).
      --audio-track-id=<integer> Audio track ID
          Stream ID of the audio track to use.
      --sub-track-id=<integer>   Subtitle track ID
          Stream ID of the subtitle track to use.
      --captions={608 (EIA/CEA 608), 708 (CEA 708)} 
                                 Preferred Closed Captions decoder
          Preferred Closed Captions decoder
      --preferred-resolution={-1 (Best available), 1080 (Full HD (1080p)), 720 (HD (720p)), 576 (Standard Definition (576 or 480 lines)), 360 (Low Definition (360 lines)), 240 (Very Low Definition (240 lines))} 
                                 Preferred video resolution
          When several video formats are available, select one whose resolution
          is closest to (but not higher than) this setting, in number of lines.
          Use this option if you don't have enough CPU power or network
          bandwidth to play higher resolutions.
   Playback control:
      --input-repeat=<integer [0 .. 65535]> 
                                 Input repetitions
          Number of time the same input will be repeated
      --start-time=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Start time
          The stream will start at this position (in seconds).
      --stop-time=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Stop time
          The stream will stop at this position (in seconds).
      --run-time=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Run time
          The stream will run this duration (in seconds).
      --input-fast-seek, --no-input-fast-seek 
                                 Fast seek
                                 (default disabled)
          Favor speed over precision while seeking
      --rate=<float [-340282346638528859811704183484516925440.000000 .. 340282346638528859811704183484516925440.000000]> 
                                 Playback speed
          This defines the playback speed (nominal speed is 1.0).
      --input-list=<string>      Input list
          You can give a comma-separated list of inputs that will be
          concatenated together after the normal one.
      --input-slave=<string>     Input slave (experimental)
          This allows you to play from several inputs at the same time. This
          feature is experimental, not all formats are supported. Use a '#'
          separated list of inputs.
      --bookmarks=<string>       Bookmarks list for a stream
          You can manually give a list of bookmarks for a stream in the form
          "{name=bookmark-name,time=optional-time-offset,bytes=optional-byte-of
          fset},{...}"
   Default devices:
      --dvd=<string>             DVD device
          This is the default DVD drive (or file) to use. Don't forget the
          colon after the drive letter (e.g. D:)
      --vcd=<string>             VCD device
          This is the default VCD drive (or file) to use. Don't forget the
          colon after the drive letter (e.g. D:)
   Network settings:
      --mtu=<integer>            MTU of the network interface
          This is the maximum application-layer packet size that can be
          transmitted over the network (in bytes).
      --ipv4-timeout=<integer [0 .. 2147483647]> 
                                 TCP connection timeout
          Default TCP connection timeout (in milliseconds).
      --http-host=<string>       HTTP server address
          By default, the server will listen on any local IP address. Specify
          an IP address (e.g. ::1 or 127.0.0.1) or a host name (e.g. localhost)
          to restrict them to a specific network interface.
      --http-port=<integer [1 .. 65535]> 
                                 HTTP server port
          The HTTP server will listen on this TCP port. The standard HTTP port
          number is 80. However allocation of port numbers below 1025 is
          usually restricted by the operating system.
      --https-port=<integer [1 .. 65535]> 
                                 HTTPS server port
          The HTTPS server will listen on this TCP port. The standard HTTPS
          port number is 443. However allocation of port numbers below 1025 is
          usually restricted by the operating system.
      --rtsp-host=<string>       RTSP server address
          This defines the address the RTSP server will listen on, along with
          the base path of the RTSP VOD media. Syntax is address/path. By
          default, the server will listen on any local IP address. Specify an
          IP address (e.g. ::1 or 127.0.0.1) or a host name (e.g. localhost) to
          restrict them to a specific network interface.
      --rtsp-port=<integer [1 .. 65535]> 
                                 RTSP server port
          The RTSP server will listen on this TCP port. The standard RTSP port
          number is 554. However allocation of port numbers below 1025 is
          usually restricted by the operating system.
      --http-cert=<string>       HTTP/TLS server certificate
          This X.509 certicate file (PEM format) is used for server-side TLS.
          On OS X, the string is used as a label to search the certificate in
          the keychain.
      --http-key=<string>        HTTP/TLS server private key
          This private key file (PEM format) is used for server-side TLS.
      --http-proxy=<string>      HTTP proxy
          HTTP proxy to be used It must be of the form
          http://[user@]myproxy.mydomain:myport/ ; if empty, the http_proxy
          environment variable will be tried.
      --http-proxy-pwd=<string>  HTTP proxy password
          If your HTTP proxy requires a password, set it here.
   Socks proxy:
      --socks=<string>           SOCKS server
          SOCKS proxy server to use. This must be of the form address:port. It
          will be used for all TCP connections
      --socks-user=<string>      SOCKS user name
          User name to be used for connection to the SOCKS proxy.
      --socks-pwd=<string>       SOCKS password
          Password to be used for connection to the SOCKS proxy.
   Metadata:
      --meta-title=<string>      Title metadata
          Allows you to specify a "title" metadata for an input.
      --meta-author=<string>     Author metadata
          Allows you to specify an "author" metadata for an input.
      --meta-artist=<string>     Artist metadata
          Allows you to specify an "artist" metadata for an input.
      --meta-genre=<string>      Genre metadata
          Allows you to specify a "genre" metadata for an input.
      --meta-copyright=<string>  Copyright metadata
          Allows you to specify a "copyright" metadata for an input.
      --meta-description=<string> 
                                 Description metadata
          Allows you to specify a "description" metadata for an input.
      --meta-date=<string>       Date metadata
          Allows you to specify a "date" metadata for an input.
      --meta-url=<string>        URL metadata
          Allows you to specify a "url" metadata for an input.
   Advanced:
      --file-caching=<integer [0 .. 60000]> 
                                 File caching (ms)
          Caching value for local files, in milliseconds.
      --live-caching=<integer [0 .. 60000]> 
                                 Live capture caching (ms)
          Caching value for cameras and microphones, in milliseconds.
      --disc-caching=<integer [0 .. 60000]> 
                                 Disc caching (ms)
          Caching value for optical media, in milliseconds.
      --network-caching=<integer [0 .. 60000]> 
                                 Network caching (ms)
          Caching value for network resources, in milliseconds.
      --cr-average=<integer>     Clock reference average counter
          When using the PVR input (or a very irregular source), you should set
          this to 10000.
      --clock-synchro={-1 (Default), 0 (Disable), 1 (Enable)} 
                                 Clock synchronisation
          It is possible to disable the input clock synchronisation for
          real-time sources. Use this if you experience jerky playback of
          network streams.
      --clock-jitter=<integer>   Clock jitter
          This defines the maximum input delay jitter that the synchronization
          algorithms should try to compensate (in milliseconds).
      --network-synchronisation, --no-network-synchronisation 
                                 Network synchronisation
                                 (default disabled)
          This allows you to remotely synchronise clocks for server and client.
          The detailed settings are available in Advanced / Network Sync.
      --input-record-path=<string> 
                                 Record directory
          Directory where the records will be stored
      --input-record-native, --no-input-record-native 
                                 Prefer native stream recording
                                 (default enabled)
          When possible, the input stream will be recorded instead of using the
          stream output module
      --input-timeshift-path=<string> 
                                 Timeshift directory
          Directory used to store the timeshift temporary files.
      --input-timeshift-granularity=<integer> 
                                 Timeshift granularity
          This is the maximum size in bytes of the temporary files that will be
          used to store the timeshifted streams.
      --input-title-format=<string> 
                                 Change title according to current media
          This option allows you to set the title according to what's being
          played<br>$a: Artist<br>$b: Album<br>$c: Copyright<br>$t:
          Title<br>$g: Genre<br>$n: Track num<br>$p: Now playing<br>$A:
          Date<br>$D: Duration<br>$Z: "Now playing" (Fall back on Title -
          Artist)
      --lua, --no-lua            Disable all lua plugins
                                 (default enabled)
          Disable all lua plugins

 Decoders
 This option can be used to alter the way VLC selects its codecs (decompression methods). Only advanced users should alter this option as it can break playback of all your streams.
      --codec=<string>           Preferred decoders list
          List of codecs that VLC will use in priority. For instance,
          'dummy,a52' will try the dummy and a52 codecs before trying the other
          ones. Only advanced users should alter this option as it can break
          playback of all your streams.
      --encoder=<string>         Preferred encoders list
          This allows you to select a list of encoders that VLC will use in
          priority.

 Input
 These options allow you to modify the behavior of the input subsystem, such as the DVD or VCD device, the network interface settings or the subtitle channel.
      --access={any,satip,vdr,filesystem,filesystem,access_realrtsp,access,dtv,dshow,imem,ftp,cdda,attachment,http,imem_access,nfs,concat,sdp,sftp,smb,tcp,udp,vcd,upnp,avcodec,access_mms,none} 
                                 Access module
          This allows you to force an access module. You can use it if the
          correct access is not automatically detected. You should not set this
          as a global option unless you really know what you are doing.
      --demux={any,mp4,avi,asf,es,flacsys,mpc,nuv,tta,wav,caf,sid,sap,ogg,mkv,live555,smf,adaptive,ts,xa,gme,aiff,directory,rawvid,image,pva,voc,mod,au,nsv,ps,ty,h26x,h26x,dvdnav,libbluray,mpgv,mjpeg,rawdv,demux_cdg,nsc,webvtt,ttml,avcodec,ps,vobsub,demux_stl,vc1,es,subtitle,real,demuxdump,stats,rawaud,webvtt,none} 
                                 Demux module
          Demultiplexers are used to separate the "elementary" streams (like
          audio and video streams). You can use it if the correct demuxer is
          not automatically detected. You should not set this as a global
          option unless you really know what you are doing.
      --stream-filter=<string>   Stream filter module
          Stream filters are used to modify the stream that is being read.
      --demux-filter=<string>    Demux filter module
          Demux filters are used to modify/control the stream that is being
          read.

 Stream output
 These options allow you to set default global options for the stream output subsystem.
      --sout=<string>            Default stream output chain
          You can enter here a default stream output chain. Refer to the
          documentation to learn how to build such chains. Warning: this chain
          will be enabled for all streams.
      --sout-display, --no-sout-display 
                                 Display while streaming
                                 (default disabled)
          Play locally the stream while streaming it.
      --sout-keep, --no-sout-keep 
                                 Keep stream output open
                                 (default disabled)
          This allows you to keep an unique stream output instance across
          multiple playlist item (automatically insert the gather stream output
          if not specified)
      --sout-all, --no-sout-all  Enable streaming of all ES
                                 (default enabled)
          Stream all elementary streams (video, audio and subtitles)
      --sout-audio, --no-sout-audio 
                                 Enable audio stream output
                                 (default enabled)
          Choose whether the audio stream should be redirected to the stream
          output facility when this last one is enabled.
      --sout-video, --no-sout-video 
                                 Enable video stream output
                                 (default enabled)
          Choose whether the video stream should be redirected to the stream
          output facility when this last one is enabled.
      --sout-spu, --no-sout-spu  Enable SPU stream output
                                 (default enabled)
          Choose whether the SPU streams should be redirected to the stream
          output facility when this last one is enabled.
      --sout-mux-caching=<integer> 
                                 Stream output muxer caching (ms)
          This allow you to configure the initial caching amount for stream
          output muxer. This value should be set in milliseconds.
   VLM:
      --vlm-conf=<string>        VLM configuration file
          Read a VLM configuration file as soon as VLM is started.
      --sap-interval=<integer>   SAP announcement interval
          When the SAP flow control is disabled, this lets you set the fixed
          interval between SAP announcements.
      --mux={any,mux_ts,ps,mux_ogg,asf,wav,mpjpeg,dummy,mp4,avi,avcodec,mp4,none} 
                                 Mux module
          This is a legacy entry to let you configure mux modules
      --access_output={any,file,dummy,ftp,http,access_output_livehttp,access_output_shout,udp,stream_out_chromecast,avcodec,none} 
                                 Access output module
          This is a legacy entry to let you configure access output modules
      --ttl=<integer>            Hop limit (TTL)
          This is the hop limit (also known as "Time-To-Live" or TTL) of the
          multicast packets sent by the stream output (-1 = use operating
          system built-in default).
      --miface=<string>          Multicast output interface
          Default multicast interface. This overrides the routing table.
      --dscp=<integer>           DiffServ Code Point
          Differentiated Services Code Point for outgoing UDP streams (or IPv4
          Type Of Service, or IPv6 Traffic Class). This is used for network
          Quality of Service.
      --packetizer={any,aes3,theora,speex,lpcm,rawvideo,vorbis,spudec,svcdsub,mpegvideo,cvdsub,mpeg4video,vc1,mpeg4audio,mlp,flac,h264,hevc,avcodec,oggspots,mpegaudio,a52,dts,copy,none} 
                                 Preferred packetizer list
          This allows you to select the order in which VLC will choose its
          packetizers.

 Miscellaneous
 These options allow you to select default modules. Leave these alone unless you really know what you are doing.
   Special modules:
      --vod-server={any,stream_out_rtp,rtsp,none} 
                                 VoD server module
          You can select which VoD server module you want to use. Set this to
          'vod_rtsp' to switch back to the old, legacy module.
   Plugins:
      --plugins-cache, --no-plugins-cache 
                                 Use a plugins cache
                                 (default enabled)
          Use a plugins cache which will greatly improve the startup time of
          VLC.
      --plugins-scan, --no-plugins-scan 
                                 Scan for new plugins
                                 (default enabled)
          Scan plugin directories for new plugins at startup. This increases
          the startup time of VLC.
      --keystore=<string>        Preferred keystore list
          List of keystores that VLC will use in priority.
   Performance options:
      --high-priority, --no-high-priority 
                                 Increase the priority of the process
                                 (default disabled)
          Increasing the priority of the process will very likely improve your
          playing experience as it allows VLC not to be disturbed by other
          applications that could otherwise take too much processor time.
          However be advised that in certain circumstances (bugs) VLC could
          take all the processor time and render the whole system unresponsive
          which might require a reboot of your machine.
      --clock-source={,interrupt,tick,multimedia,perf,wall} 
                                 Clock source
          Clock source

 Playlist
 These options define the behavior of the playlist. Some of them can be overridden in the playlist dialog box.
  -Z, --random, --no-random      Play files randomly forever
                                 (default disabled)
          VLC will randomly play files in the playlist until interrupted.
  -L, --loop, --no-loop          Repeat all
                                 (default disabled)
          VLC will keep playing the playlist indefinitely.
  -R, --repeat, --no-repeat      Repeat current item
                                 (default disabled)
          VLC will keep playing the current playlist item.
      --play-and-exit, --no-play-and-exit 
                                 Play and exit
                                 (default disabled)
          Exit if there are no more items in the playlist.
      --play-and-stop, --no-play-and-stop 
                                 Play and stop
                                 (default disabled)
          Stop the playlist after each played playlist item.
      --play-and-pause, --no-play-and-pause 
                                 Play and pause
                                 (default disabled)
          Pause each item in the playlist on the last frame.
      --start-paused, --no-start-paused 
                                 Start paused
                                 (default disabled)
          Pause each item in the playlist on the first frame.
      --playlist-autostart, --no-playlist-autostart 
                                 Auto start
                                 (default enabled)
          Automatically start playing the playlist content once it's loaded.
      --playlist-cork, --no-playlist-cork 
                                 Pause on audio communication
                                 (default enabled)
          If pending audio communication is detected, playback will be paused
          automatically.
      --one-instance, --no-one-instance 
                                 Allow only one running instance
                                 (default disabled)
          Allowing only one running instance of VLC can sometimes be useful,
          for example if you associated VLC with some media types and you don't
          want a new instance of VLC to be opened each time you open a file in
          your file manager. This option will allow you to play the file with
          the already running instance or enqueue it.
      --started-from-file, --no-started-from-file 
                                 VLC is started from file association
                                 (default disabled)
          Tell VLC that it is being launched due to a file association in the
          OS
      --one-instance-when-started-from-file, --no-one-instance-when-started-from-file 
                                 Use only one instance when started from file
                                 manager
                                 (default enabled)
          Use only one instance when started from file manager
      --playlist-enqueue, --no-playlist-enqueue 
                                 Enqueue items into playlist in one instance
                                 mode
                                 (default disabled)
          When using the one instance only option, enqueue items to playlist
          and keep playing current item.
      --media-library, --no-media-library 
                                 Use media library
                                 (default disabled)
          The media library is automatically saved and reloaded each time you
          start VLC.
      --playlist-tree, --no-playlist-tree 
                                 Display playlist tree
                                 (default disabled)
          The playlist can use a tree to categorize some items, like the
          contents of a directory.
      --open=<string>            Default stream
          This stream will always be opened at VLC startup.
      --auto-preparse, --no-auto-preparse 
                                 Automatically preparse items
                                 (default enabled)
          Automatically preparse items added to the playlist (to retrieve some
          metadata).
      --preparse-timeout=<integer> 
                                 Preparsing timeout
          Maximum time allowed to preparse an item, in milliseconds
      --metadata-network-access, --no-metadata-network-access 
                                 Allow metadata network access
                                 (default enabled)
          Allow metadata network access
      --recursive={none,collapse,expand} 
                                 Subdirectory behavior
          Select whether subdirectories must be expanded. none: subdirectories
          do not appear in the playlist. collapse: subdirectories appear but
          are expanded on first play. expand: all subdirectories are expanded. 
      --ignore-filetypes=<string> 
                                 Ignored extensions
          Files with these extensions will not be added to playlist when
          opening a directory. This is useful if you add directories that
          contain playlist files for instance. Use a comma-separated list of
          extensions.
      --show-hiddenfiles, --no-show-hiddenfiles 
                                 Show hidden files
                                 (default disabled)
          Ignore files starting with '.'
      --extractor-flatten, --no-extractor-flatten 
                                 Flatten files listed by extractors (archive)
                                 (default disabled)
  -S, --services-discovery=<string> 
                                 Services discovery modules
          Specifies the services discovery modules to preload, separated by
          colons. Typical value is "sap".
  -v, --verbose=<integer>        Verbosity (0,1,2)
          This is the verbosity level (0=only errors and standard messages,
          1=warnings, 2=debug).
      --color, --no-color        Color messages
                                 (default enabled)
          This enables colorization of the messages sent to the console. Your
          terminal needs Linux color support for this to work.
      --advanced, --no-advanced  Show advanced options
                                 (default disabled)
          When this is enabled, the preferences and/or interfaces will show all
          available options, including those that most users should never
          touch.
      --interact, --no-interact  Interface interaction
                                 (default enabled)
          When this is enabled, the interface will show a dialog box each time
          some user input is required.
      --stats, --no-stats        Locally collect statistics
                                 (default enabled)
          Collect miscellaneous local statistics about the playing media.
  -I, --intf=<string>            Interface module
          This is the main interface used by VLC. The default behavior is to
          automatically select the best module available.
      --extraintf=<string>       Extra interface modules
          You can select "additional interfaces" for VLC. They will be launched
          in the background in addition to the default interface. Use a colon
          separated list of interface modules. (common values are "rc" (remote
          control), "http", "gestures" ...)
      --control=<string>         Control interfaces
          You can select control interfaces for VLC.

 Hot keys
 These settings are the global VLC key bindings, known as "hotkeys".
      --hotkeys-y-wheel-mode={-1 (Ignore), 0 (Volume control), 2 (Position control), 3 (Position control reversed)} 
                                 Mouse wheel vertical axis control
          The mouse wheel vertical (up/down) axis can control volume, position
          or be ignored.
      --hotkeys-x-wheel-mode={-1 (Ignore), 0 (Volume control), 2 (Position control), 3 (Position control reversed)} 
                                 Mouse wheel horizontal axis control
          The mouse wheel horizontal (left/right) axis can control volume,
          position or be ignored.
      --global-key-toggle-fullscreen=<string> 
                                 Fullscreen
          Select the hotkey to use to swap fullscreen state.
      --key-toggle-fullscreen=<string> 
                                 Fullscreen
          Select the hotkey to use to swap fullscreen state.
      --global-key-leave-fullscreen=<string> 
                                 Exit fullscreen
          Select the hotkey to use to exit fullscreen state.
      --key-leave-fullscreen=<string> 
                                 Exit fullscreen
          Select the hotkey to use to exit fullscreen state.
      --global-key-play-pause=<string> 
                                 Play/Pause
          Select the hotkey to use to swap paused state.
      --key-play-pause=<string>  Play/Pause
          Select the hotkey to use to swap paused state.
      --global-key-pause=<string> 
                                 Pause only
          Select the hotkey to use to pause.
      --key-pause=<string>       Pause only
          Select the hotkey to use to pause.
      --global-key-play=<string> Play only
          Select the hotkey to use to play.
      --key-play=<string>        Play only
          Select the hotkey to use to play.
      --global-key-faster=<string> 
                                 Faster
          Select the hotkey to use for fast forward playback.
      --key-faster=<string>      Faster
          Select the hotkey to use for fast forward playback.
      --global-key-slower=<string> 
                                 Slower
          Select the hotkey to use for slow motion playback.
      --key-slower=<string>      Slower
          Select the hotkey to use for slow motion playback.
      --global-key-rate-normal=<string> 
                                 Normal rate
          Select the hotkey to set the playback rate back to normal.
      --key-rate-normal=<string> Normal rate
          Select the hotkey to set the playback rate back to normal.
      --global-key-rate-faster-fine=<string> 
                                 Faster (fine)
          Select the hotkey to use for fast forward playback.
      --key-rate-faster-fine=<string> 
                                 Faster (fine)
          Select the hotkey to use for fast forward playback.
      --global-key-rate-slower-fine=<string> 
                                 Slower (fine)
          Select the hotkey to use for slow motion playback.
      --key-rate-slower-fine=<string> 
                                 Slower (fine)
          Select the hotkey to use for slow motion playback.
      --global-key-next=<string> Next
          Select the hotkey to use to skip to the next item in the playlist.
      --key-next=<string>        Next
          Select the hotkey to use to skip to the next item in the playlist.
      --global-key-prev=<string> Previous
          Select the hotkey to use to skip to the previous item in the
          playlist.
      --key-prev=<string>        Previous
          Select the hotkey to use to skip to the previous item in the
          playlist.
      --global-key-stop=<string> Stop
          Select the hotkey to stop playback.
      --key-stop=<string>        Stop
          Select the hotkey to stop playback.
      --global-key-position=<string> 
                                 Position
          Select the hotkey to display the position.
      --key-position=<string>    Position
          Select the hotkey to display the position.
      --global-key-jump-extrashort=<string> 
                                 Very short backwards jump
          Select the hotkey to make a very short backwards jump.
      --key-jump-extrashort=<string> 
                                 Very short backwards jump
          Select the hotkey to make a very short backwards jump.
      --global-key-jump+extrashort=<string> 
                                 Very short forward jump
          Select the hotkey to make a very short forward jump.
      --key-jump+extrashort=<string> 
                                 Very short forward jump
          Select the hotkey to make a very short forward jump.
      --global-key-jump-short=<string> 
                                 Short backwards jump
          Select the hotkey to make a short backwards jump.
      --key-jump-short=<string>  Short backwards jump
          Select the hotkey to make a short backwards jump.
      --global-key-jump+short=<string> 
                                 Short forward jump
          Select the hotkey to make a short forward jump.
      --key-jump+short=<string>  Short forward jump
          Select the hotkey to make a short forward jump.
      --global-key-jump-medium=<string> 
                                 Medium backwards jump
          Select the hotkey to make a medium backwards jump.
      --key-jump-medium=<string> Medium backwards jump
          Select the hotkey to make a medium backwards jump.
      --global-key-jump+medium=<string> 
                                 Medium forward jump
          Select the hotkey to make a medium forward jump.
      --key-jump+medium=<string> Medium forward jump
          Select the hotkey to make a medium forward jump.
      --global-key-jump-long=<string> 
                                 Long backwards jump
          Select the hotkey to make a long backwards jump.
      --key-jump-long=<string>   Long backwards jump
          Select the hotkey to make a long backwards jump.
      --global-key-jump+long=<string> 
                                 Long forward jump
          Select the hotkey to make a long forward jump.
      --key-jump+long=<string>   Long forward jump
          Select the hotkey to make a long forward jump.
      --global-key-frame-next=<string> 
                                 Next frame
          Select the hotkey to got to the next video frame.
      --key-frame-next=<string>  Next frame
          Select the hotkey to got to the next video frame.
      --global-key-nav-activate=<string> 
                                 Activate
          Select the key to activate selected item in DVD menus.
      --key-nav-activate=<string> 
                                 Activate
          Select the key to activate selected item in DVD menus.
      --global-key-nav-up=<string> 
                                 Navigate up
          Select the key to move the selector up in DVD menus / Move viewpoint
          to up (pitch).
      --key-nav-up=<string>      Navigate up
          Select the key to move the selector up in DVD menus / Move viewpoint
          to up (pitch).
      --global-key-nav-down=<string> 
                                 Navigate down
          Select the key to move the selector down in DVD menus / Move
          viewpoint to down (pitch).
      --key-nav-down=<string>    Navigate down
          Select the key to move the selector down in DVD menus / Move
          viewpoint to down (pitch).
      --global-key-nav-left=<string> 
                                 Navigate left
          Select the key to move the selector left in DVD menus / Move
          viewpoint to left (yaw).
      --key-nav-left=<string>    Navigate left
          Select the key to move the selector left in DVD menus / Move
          viewpoint to left (yaw).
      --global-key-nav-right=<string> 
                                 Navigate right
          Select the key to move the selector right in DVD menus / Move
          viewpoint to right (yaw).
      --key-nav-right=<string>   Navigate right
          Select the key to move the selector right in DVD menus / Move
          viewpoint to right (yaw).
      --global-key-disc-menu=<string> 
                                 Go to the DVD menu
          Select the key to take you to the DVD menu
      --key-disc-menu=<string>   Go to the DVD menu
          Select the key to take you to the DVD menu
      --global-key-title-prev=<string> 
                                 Select previous DVD title
          Select the key to choose the previous title from the DVD
      --key-title-prev=<string>  Select previous DVD title
          Select the key to choose the previous title from the DVD
      --global-key-title-next=<string> 
                                 Select next DVD title
          Select the key to choose the next title from the DVD
      --key-title-next=<string>  Select next DVD title
          Select the key to choose the next title from the DVD
      --global-key-chapter-prev=<string> 
                                 Select prev DVD chapter
          Select the key to choose the previous chapter from the DVD
      --key-chapter-prev=<string> 
                                 Select prev DVD chapter
          Select the key to choose the previous chapter from the DVD
      --global-key-chapter-next=<string> 
                                 Select next DVD chapter
          Select the key to choose the next chapter from the DVD
      --key-chapter-next=<string> 
                                 Select next DVD chapter
          Select the key to choose the next chapter from the DVD
      --global-key-quit=<string> Quit
          Select the hotkey to quit the application.
      --key-quit=<string>        Quit
          Select the hotkey to quit the application.
      --global-key-vol-up=<string> 
                                 Volume up
          Select the key to increase audio volume.
      --key-vol-up=<string>      Volume up
          Select the key to increase audio volume.
      --global-key-vol-down=<string> 
                                 Volume down
          Select the key to decrease audio volume.
      --key-vol-down=<string>    Volume down
          Select the key to decrease audio volume.
      --global-key-vol-mute=<string> 
                                 Mute
          Select the key to mute audio.
      --key-vol-mute=<string>    Mute
          Select the key to mute audio.
      --global-key-subdelay-up=<string> 
                                 Subtitle delay up
          Select the key to increase the subtitle delay.
      --key-subdelay-up=<string> Subtitle delay up
          Select the key to increase the subtitle delay.
      --global-key-subdelay-down=<string> 
                                 Subtitle delay down
          Select the key to decrease the subtitle delay.
      --key-subdelay-down=<string> 
                                 Subtitle delay down
          Select the key to decrease the subtitle delay.
      --global-key-subsync-markaudio=<string> 
                                 Subtitle sync / bookmark audio timestamp
          Select the key to bookmark audio timestamp when syncing subtitles.
      --key-subsync-markaudio=<string> 
                                 Subtitle sync / bookmark audio timestamp
          Select the key to bookmark audio timestamp when syncing subtitles.
      --global-key-subsync-marksub=<string> 
                                 Subtitle sync / bookmark subtitle timestamp
          Select the key to bookmark subtitle timestamp when syncing subtitles.
      --key-subsync-marksub=<string> 
                                 Subtitle sync / bookmark subtitle timestamp
          Select the key to bookmark subtitle timestamp when syncing subtitles.
      --global-key-subsync-apply=<string> 
                                 Subtitle sync / synchronize audio & subtitle
                                 timestamps
          Select the key to synchronize bookmarked audio & subtitle timestamps.
      --key-subsync-apply=<string> 
                                 Subtitle sync / synchronize audio & subtitle
                                 timestamps
          Select the key to synchronize bookmarked audio & subtitle timestamps.
      --global-key-subsync-reset=<string> 
                                 Subtitle sync / reset audio & subtitle
                                 synchronization
          Select the key to reset synchronization of audio & subtitle
          timestamps.
      --key-subsync-reset=<string> 
                                 Subtitle sync / reset audio & subtitle
                                 synchronization
          Select the key to reset synchronization of audio & subtitle
          timestamps.
      --global-key-subpos-up=<string> 
                                 Subtitle position up
          Select the key to move subtitles higher.
      --key-subpos-up=<string>   Subtitle position up
          Select the key to move subtitles higher.
      --global-key-subpos-down=<string> 
                                 Subtitle position down
          Select the key to move subtitles lower.
      --key-subpos-down=<string> Subtitle position down
          Select the key to move subtitles lower.
      --global-key-audiodelay-up=<string> 
                                 Audio delay up
          Select the key to increase the audio delay.
      --key-audiodelay-up=<string> 
                                 Audio delay up
          Select the key to increase the audio delay.
      --global-key-audiodelay-down=<string> 
                                 Audio delay down
          Select the key to decrease the audio delay.
      --key-audiodelay-down=<string> 
                                 Audio delay down
          Select the key to decrease the audio delay.
      --global-key-audio-track=<string> 
                                 Cycle audio track
          Cycle through the available audio tracks(languages).
      --key-audio-track=<string> Cycle audio track
          Cycle through the available audio tracks(languages).
      --global-key-audiodevice-cycle=<string> 
                                 Cycle through audio devices
          Cycle through available audio devices
      --key-audiodevice-cycle=<string> 
                                 Cycle through audio devices
          Cycle through available audio devices
      --global-key-subtitle-revtrack=<string> 
                                 Cycle subtitle track in reverse order
          Cycle through the available subtitle tracks in reverse order.
      --key-subtitle-revtrack=<string> 
                                 Cycle subtitle track in reverse order
          Cycle through the available subtitle tracks in reverse order.
      --global-key-subtitle-track=<string> 
                                 Cycle subtitle track
          Cycle through the available subtitle tracks.
      --key-subtitle-track=<string> 
                                 Cycle subtitle track
          Cycle through the available subtitle tracks.
      --global-key-subtitle-toggle=<string> 
                                 Toggle subtitles
          Toggle subtitle track visibility.
      --key-subtitle-toggle=<string> 
                                 Toggle subtitles
          Toggle subtitle track visibility.
      --global-key-program-sid-next=<string> 
                                 Cycle next program Service ID
          Cycle through the available next program Service IDs (SIDs).
      --key-program-sid-next=<string> 
                                 Cycle next program Service ID
          Cycle through the available next program Service IDs (SIDs).
      --global-key-program-sid-prev=<string> 
                                 Cycle previous program Service ID
          Cycle through the available previous program Service IDs (SIDs).
      --key-program-sid-prev=<string> 
                                 Cycle previous program Service ID
          Cycle through the available previous program Service IDs (SIDs).
      --global-key-aspect-ratio=<string> 
                                 Cycle source aspect ratio
          Cycle through a predefined list of source aspect ratios.
      --key-aspect-ratio=<string> 
                                 Cycle source aspect ratio
          Cycle through a predefined list of source aspect ratios.
      --global-key-crop=<string> Cycle video crop
          Cycle through a predefined list of crop formats.
      --key-crop=<string>        Cycle video crop
          Cycle through a predefined list of crop formats.
      --global-key-toggle-autoscale=<string> 
                                 Toggle autoscaling
          Activate or deactivate autoscaling.
      --key-toggle-autoscale=<string> 
                                 Toggle autoscaling
          Activate or deactivate autoscaling.
      --global-key-incr-scalefactor=<string> 
                                 Increase scale factor
          Increase scale factor
      --key-incr-scalefactor=<string> 
                                 Increase scale factor
          Increase scale factor
      --global-key-decr-scalefactor=<string> 
                                 Decrease scale factor
          Decrease scale factor
      --key-decr-scalefactor=<string> 
                                 Decrease scale factor
          Decrease scale factor
      --global-key-deinterlace=<string> 
                                 Toggle deinterlacing
          Activate or deactivate deinterlacing.
      --key-deinterlace=<string> Toggle deinterlacing
          Activate or deactivate deinterlacing.
      --global-key-deinterlace-mode=<string> 
                                 Cycle deinterlace modes
          Cycle through available deinterlace modes.
      --key-deinterlace-mode=<string> 
                                 Cycle deinterlace modes
          Cycle through available deinterlace modes.
      --global-key-intf-show=<string> 
                                 Show controller in fullscreen
          Show controller in fullscreen
      --key-intf-show=<string>   Show controller in fullscreen
          Show controller in fullscreen
      --global-key-intf-boss=<string> 
                                 Boss key
          Hide the interface and pause playback.
      --key-intf-boss=<string>   Boss key
          Hide the interface and pause playback.
      --global-key-intf-popup-menu=<string> 
                                 Context menu
          Show the contextual popup menu.
      --key-intf-popup-menu=<string> 
                                 Context menu
          Show the contextual popup menu.
      --global-key-snapshot=<string> 
                                 Take video snapshot
          Takes a video snapshot and writes it to disk.
      --key-snapshot=<string>    Take video snapshot
          Takes a video snapshot and writes it to disk.
      --global-key-record=<string> 
                                 Record
          Record access filter start/stop.
      --key-record=<string>      Record
          Record access filter start/stop.
      --global-key-zoom=<string> Zoom
          Zoom
      --key-zoom=<string>        Zoom
          Zoom
      --global-key-unzoom=<string> 
                                 Un-Zoom
          Un-Zoom
      --key-unzoom=<string>      Un-Zoom
          Un-Zoom
      --global-key-wallpaper=<string> 
                                 Toggle wallpaper mode in video output
          Toggle wallpaper mode in video output.
      --key-wallpaper=<string>   Toggle wallpaper mode in video output
          Toggle wallpaper mode in video output.
      --global-key-crop-top=<string> 
                                 Crop one pixel from the top of the video
          Crop one pixel from the top of the video
      --key-crop-top=<string>    Crop one pixel from the top of the video
          Crop one pixel from the top of the video
      --global-key-uncrop-top=<string> 
                                 Uncrop one pixel from the top of the video
          Uncrop one pixel from the top of the video
      --key-uncrop-top=<string>  Uncrop one pixel from the top of the video
          Uncrop one pixel from the top of the video
      --global-key-crop-left=<string> 
                                 Crop one pixel from the left of the video
          Crop one pixel from the left of the video
      --key-crop-left=<string>   Crop one pixel from the left of the video
          Crop one pixel from the left of the video
      --global-key-uncrop-left=<string> 
                                 Uncrop one pixel from the left of the video
          Uncrop one pixel from the left of the video
      --key-uncrop-left=<string> Uncrop one pixel from the left of the video
          Uncrop one pixel from the left of the video
      --global-key-crop-bottom=<string> 
                                 Crop one pixel from the bottom of the video
          Crop one pixel from the bottom of the video
      --key-crop-bottom=<string> Crop one pixel from the bottom of the video
          Crop one pixel from the bottom of the video
      --global-key-uncrop-bottom=<string> 
                                 Uncrop one pixel from the bottom of the video
          Uncrop one pixel from the bottom of the video
      --key-uncrop-bottom=<string> 
                                 Uncrop one pixel from the bottom of the video
          Uncrop one pixel from the bottom of the video
      --global-key-crop-right=<string> 
                                 Crop one pixel from the right of the video
          Crop one pixel from the right of the video
      --key-crop-right=<string>  Crop one pixel from the right of the video
          Crop one pixel from the right of the video
      --global-key-uncrop-right=<string> 
                                 Uncrop one pixel from the right of the video
          Uncrop one pixel from the right of the video
      --key-uncrop-right=<string> 
                                 Uncrop one pixel from the right of the video
          Uncrop one pixel from the right of the video
      --global-key-random=<string> 
                                 Random
          Toggle random playlist playback
      --key-random=<string>      Random
          Toggle random playlist playback
      --global-key-loop=<string> Normal/Loop/Repeat
          Toggle Normal/Loop/Repeat playlist modes
      --key-loop=<string>        Normal/Loop/Repeat
          Toggle Normal/Loop/Repeat playlist modes
      --global-key-viewpoint-fov-in=<string> 
                                 Shrink the viewpoint field of view (360°)
          Shrink the viewpoint field of view (360°)
      --key-viewpoint-fov-in=<string> 
                                 Shrink the viewpoint field of view (360°)
          Shrink the viewpoint field of view (360°)
      --global-key-viewpoint-fov-out=<string> 
                                 Expand the viewpoint field of view (360°)
          Expand the viewpoint field of view (360°)
      --key-viewpoint-fov-out=<string> 
                                 Expand the viewpoint field of view (360°)
          Expand the viewpoint field of view (360°)
      --global-key-viewpoint-roll-clock=<string> 
                                 Roll the viewpoint clockwise (360°)
          Roll the viewpoint clockwise (360°)
      --key-viewpoint-roll-clock=<string> 
                                 Roll the viewpoint clockwise (360°)
          Roll the viewpoint clockwise (360°)
      --global-key-viewpoint-roll-anticlock=<string> 
                                 Roll the viewpoint anti-clockwise (360°)
          Roll the viewpoint anti-clockwise (360°)
      --key-viewpoint-roll-anticlock=<string> 
                                 Roll the viewpoint anti-clockwise (360°)
          Roll the viewpoint anti-clockwise (360°)
   Zoom:
      --global-key-zoom-quarter=<string> 
                                 1:4 Quarter
      --key-zoom-quarter=<string> 
                                 1:4 Quarter
      --global-key-zoom-half=<string> 
                                 1:2 Half
      --key-zoom-half=<string>   1:2 Half
      --global-key-zoom-original=<string> 
                                 1:1 Original
      --key-zoom-original=<string> 
                                 1:1 Original
      --global-key-zoom-double=<string> 
                                 2:1 Double
      --key-zoom-double=<string> 2:1 Double
   Jump sizes:
      --extrashort-jump-size=<integer> 
                                 Very short jump length
          Very short jump length, in seconds.
      --short-jump-size=<integer> 
                                 Short jump length
          Short jump length, in seconds.
      --medium-jump-size=<integer> 
                                 Medium jump length
          Medium jump length, in seconds.
      --long-jump-size=<integer> Long jump length
          Long jump length, in seconds.
      --global-key-set-bookmark1=<string> 
                                 Set playlist bookmark 1
          Select the key to set this playlist bookmark.
      --key-set-bookmark1=<string> 
                                 Set playlist bookmark 1
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark2=<string> 
                                 Set playlist bookmark 2
          Select the key to set this playlist bookmark.
      --key-set-bookmark2=<string> 
                                 Set playlist bookmark 2
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark3=<string> 
                                 Set playlist bookmark 3
          Select the key to set this playlist bookmark.
      --key-set-bookmark3=<string> 
                                 Set playlist bookmark 3
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark4=<string> 
                                 Set playlist bookmark 4
          Select the key to set this playlist bookmark.
      --key-set-bookmark4=<string> 
                                 Set playlist bookmark 4
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark5=<string> 
                                 Set playlist bookmark 5
          Select the key to set this playlist bookmark.
      --key-set-bookmark5=<string> 
                                 Set playlist bookmark 5
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark6=<string> 
                                 Set playlist bookmark 6
          Select the key to set this playlist bookmark.
      --key-set-bookmark6=<string> 
                                 Set playlist bookmark 6
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark7=<string> 
                                 Set playlist bookmark 7
          Select the key to set this playlist bookmark.
      --key-set-bookmark7=<string> 
                                 Set playlist bookmark 7
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark8=<string> 
                                 Set playlist bookmark 8
          Select the key to set this playlist bookmark.
      --key-set-bookmark8=<string> 
                                 Set playlist bookmark 8
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark9=<string> 
                                 Set playlist bookmark 9
          Select the key to set this playlist bookmark.
      --key-set-bookmark9=<string> 
                                 Set playlist bookmark 9
          Select the key to set this playlist bookmark.
      --global-key-set-bookmark10=<string> 
                                 Set playlist bookmark 10
          Select the key to set this playlist bookmark.
      --key-set-bookmark10=<string> 
                                 Set playlist bookmark 10
          Select the key to set this playlist bookmark.
      --global-key-play-bookmark1=<string> 
                                 Play playlist bookmark 1
          Select the key to play this bookmark.
      --key-play-bookmark1=<string> 
                                 Play playlist bookmark 1
          Select the key to play this bookmark.
      --global-key-play-bookmark2=<string> 
                                 Play playlist bookmark 2
          Select the key to play this bookmark.
      --key-play-bookmark2=<string> 
                                 Play playlist bookmark 2
          Select the key to play this bookmark.
      --global-key-play-bookmark3=<string> 
                                 Play playlist bookmark 3
          Select the key to play this bookmark.
      --key-play-bookmark3=<string> 
                                 Play playlist bookmark 3
          Select the key to play this bookmark.
      --global-key-play-bookmark4=<string> 
                                 Play playlist bookmark 4
          Select the key to play this bookmark.
      --key-play-bookmark4=<string> 
                                 Play playlist bookmark 4
          Select the key to play this bookmark.
      --global-key-play-bookmark5=<string> 
                                 Play playlist bookmark 5
          Select the key to play this bookmark.
      --key-play-bookmark5=<string> 
                                 Play playlist bookmark 5
          Select the key to play this bookmark.
      --global-key-play-bookmark6=<string> 
                                 Play playlist bookmark 6
          Select the key to play this bookmark.
      --key-play-bookmark6=<string> 
                                 Play playlist bookmark 6
          Select the key to play this bookmark.
      --global-key-play-bookmark7=<string> 
                                 Play playlist bookmark 7
          Select the key to play this bookmark.
      --key-play-bookmark7=<string> 
                                 Play playlist bookmark 7
          Select the key to play this bookmark.
      --global-key-play-bookmark8=<string> 
                                 Play playlist bookmark 8
          Select the key to play this bookmark.
      --key-play-bookmark8=<string> 
                                 Play playlist bookmark 8
          Select the key to play this bookmark.
      --global-key-play-bookmark9=<string> 
                                 Play playlist bookmark 9
          Select the key to play this bookmark.
      --key-play-bookmark9=<string> 
                                 Play playlist bookmark 9
          Select the key to play this bookmark.
      --global-key-play-bookmark10=<string> 
                                 Play playlist bookmark 10
          Select the key to play this bookmark.
      --key-play-bookmark10=<string> 
                                 Play playlist bookmark 10
          Select the key to play this bookmark.
      --global-key-clear-playlist=<string> 
                                 Clear the playlist
          Select the key to clear the current playlist.
      --key-clear-playlist=<string> 
                                 Clear the playlist
          Select the key to clear the current playlist.
      --global-key-subtitle-text-scale-normal=<string> 
                                 Reset subtitles text scale
          Select the key to change subtitles text scaling
      --key-subtitle-text-scale-normal=<string> 
                                 Reset subtitles text scale
          Select the key to change subtitles text scaling
      --global-key-subtitle-text-scale-up=<string> 
                                 Scale down subtitles text
          Select the key to change subtitles text scaling
      --key-subtitle-text-scale-up=<string> 
                                 Scale down subtitles text
          Select the key to change subtitles text scaling
      --global-key-subtitle-text-scale-down=<string> 
                                 Scale up subtitles text
          Select the key to change subtitles text scaling
      --key-subtitle-text-scale-down=<string> 
                                 Scale up subtitles text
          Select the key to change subtitles text scaling
      --bookmark1=<string>       Playlist bookmark 1
          This allows you to define playlist bookmarks.
      --bookmark2=<string>       Playlist bookmark 2
          This allows you to define playlist bookmarks.
      --bookmark3=<string>       Playlist bookmark 3
          This allows you to define playlist bookmarks.
      --bookmark4=<string>       Playlist bookmark 4
          This allows you to define playlist bookmarks.
      --bookmark5=<string>       Playlist bookmark 5
          This allows you to define playlist bookmarks.
      --bookmark6=<string>       Playlist bookmark 6
          This allows you to define playlist bookmarks.
      --bookmark7=<string>       Playlist bookmark 7
          This allows you to define playlist bookmarks.
      --bookmark8=<string>       Playlist bookmark 8
          This allows you to define playlist bookmarks.
      --bookmark9=<string>       Playlist bookmark 9
          This allows you to define playlist bookmarks.
      --bookmark10=<string>      Playlist bookmark 10
          This allows you to define playlist bookmarks.
  -h, --help, --no-help          print help for VLC (can be combined with
                                 --advanced and --help-verbose)
                                 (default disabled)
  -H, --full-help, --no-full-help 
                                 Exhaustive help for VLC and its modules
                                 (default disabled)
      --longhelp, --no-longhelp  print help for VLC and all its modules (can be
                                 combined with --advanced and --help-verbose)
                                 (default disabled)
      --help-verbose, --no-help-verbose 
                                 ask for extra verbosity when displaying help
                                 (default disabled)
  -l, --list, --no-list          print a list of available modules
                                 (default disabled)
      --list-verbose, --no-list-verbose 
                                 print a list of available modules with extra
                                 detail
                                 (default disabled)
  -p, --module=<string>          print help on a specific module (can be
                                 combined with --advanced and --help-verbose).
                                 Prefix the module name with = for strict
                                 matches.
      --ignore-config, --no-ignore-config 
                                 no configuration option will be loaded nor
                                 saved to config file
                                 (default enabled)
      --reset-config, --no-reset-config 
                                 reset the current config to the default values
                                 (default disabled)
      --reset-plugins-cache, --no-reset-plugins-cache 
                                 resets the current plugins cache
                                 (default disabled)
      --version, --no-version    print version information
                                 (default disabled)
      --config=<string>          use alternate config file

Note: 2 modules were not displayed because they only have advanced options.
Retrieved from "https://wiki.videolan.org/index.php?title=VLC_command-line_help&oldid=60996"