View source for VLC command-line help

As you may have noticed, the command ''vlc --help'' is not very useful due to to the non-scrollable pop-up window that opened.

If you look for help, on a particular module, use ''vlc -p module --advanced''

So here's the output of ''vlc --longhelp --advanced --help-verbose'' for the 0.8.5-test1 (2006/03/27) version in Windows.

 <nowiki>     
Usage: vlc.exe [options] [playlistitems] ...
You can specify multiple playlistitems on the commandline. They will be enqueued in the playlist.
The first item specified will be played first.

Options-styles:
  --option  A global option that is set for the duration of the program.
   -option  A single letter version of a global --option.
   :option  An option that only applies to the playlistitem directly before it
            and that overrides previous settings.

Playlistitem MRL syntax:
  [[access][/demux]://]URL[@[title][:chapter][-[title][:chapter]]] [:option=value ...]

  Many of the global --options can also be used as MRL specific :options.
  Multiple :option=value pairs can be specified.

URL syntax:
  [file://]filename              Plain media file
  http://ip:port/file            HTTP URL
  ftp://ip:port/file             FTP URL
  mms://ip:port/file             MMS URL
  screen://                      Screen capture
  [dvd://][device][@raw_device]  DVD device
  [vcd://][device]               VCD device
  [cdda://][device]              Audio CD device
  udp:[[<source address>]@[<bind address>][:<bind port>]]
                                 UDP stream sent by a streaming server
  vlc:pause:<seconds>            Special item to pause the playlist for a certain time
  vlc:quit                       Special item to quit VLC

 Help options
  -h, --help                     Afficher l’aide de VLC (peut être combiné
                                 avec --advanced)
  -H, --longhelp                 Afficher l’aide de VLC et de ses modules
                                 (peut être combiné avec --advanced)
      --advanced                 Afficher l’aide pour les options avancées
      --help-verbose             Afficher plus de détails dans l’aide
  -l, --list                     Affiche la liste des modules disponibles
  -p, --module <string>          Afficher l’aide d'un module spécifique
                                 (peut être combiné avec --advanced)
      --save-config              Enregistre les options de la ligne de
                                 commande actuelle dans la configuration
      --reset-config             Remet à zéro la configuration
      --config <string>          Utilise un autre fichier de configuration
      --reset-plugins-cache      Remet à zéro le cache des modules
      --version                  Affiche le numéro de version

 Audio
      --audio, --no-audio        Enable audio (default enabled)
          You can completely disable the audio output.
          In this case, the audio decoding stage will
          not take place, thus saving some processing
          power. (default enabled)
      --volume <integer>         Default audio volume
          You can set the default audio output volume
          here, in a range from 0 to 1024.
      --spdif, --no-spdif        Use the S/PDIF audio output when available
                                 (default disabled)
          This option allows you to use the S/PDIF
          audio output by default when your hardware
          supports it as well as the audio stream being
          played. (default disabled)
      --force-dolby-surround {0 (Auto), 1 (On), 2 (Off)}
                                 Force detection of Dolby Surround
          Use this when you know your stream is (or is
          not) encoded with Dolby Surround but fails to
          be detected as such. And even if the stream
          is not actually encoded with Dolby Surround,
          turning on this option might enhance your
          experience, especially when combined with the
          Headphone Channel Mixer.
      --audio-filter <string>    Audio filters
          This allows you to add audio post processing
          filters, to modify the sound
      --audio-visual <string>    Audio visualizations 
          This allows you to add visualization modules
          (spectrum analyzer, etc.).

 Video
  -f, --fullscreen, --no-fullscreen
                                 Fullscreen video output (default disabled)
          If this option is enabled, VLC will always
          start a video in fullscreen mode. (default
          disabled)
      --overlay, --no-overlay    Overlay video output (default enabled)
          If enabled, VLC will try to take advantage of
          the overlay capabilities of your graphics
          card (hardware acceleration). (default
          enabled)
      --video-on-top, --no-video-on-top
                                 Always on top (default disabled)
          Always place the video window on top of other
          windows. (default disabled)
      --snapshot-path <string>   Video snapshot directory
          Allows you to specify the directory where the
          video snapshots will be stored.
      --snapshot-format {png,jpg}
                                 Video snapshot format
          Allows you to specify the image format in
          which the video snapshots will be stored.
      --snapshot-preview, --no-snapshot-preview
                                 Display video snapshot preview (default
                                 enabled)
          Enable / disable displaying the snapshot
          preview in the screen's to  left corner.
          (default enabled)
      --crop <string>            Video cropping
          This will force the cropping of the source
          video. Accepted formats are x:y (4:3, 16:9,
          etc.) expressing the global image aspect.
      --aspect-ratio <string>    Source aspect ratio
          This will force the source aspect ratio. For
          instance, some DVDs claim to be 16:9 while
          they are actually 4:3. This can also be used
          as a hint for VLC when a movie does not have
          aspect ratio information. Accepted formats
          are x:y (4:3, 16:9, etc.) expressing the
          global image aspect, or a float value (1.25,
          1.3333, etc.) expressing pixel squareness.
      --vout-filter <string>     Video filter module
          This will allow you to add a post-processing
          filter to enhance the picture quality, for
          instance deinterlacing, or to clone or
          distort the video window.

 Subpictures
      --osd, --no-osd            On Screen Display (default enabled)
          VLC can display messages on the video. This
          is called OSD (On Screen Display). You can
          disable this feature here. (default enabled)
      --sub-file <string>        Use subtitle file
          Load this subtitle file. To be used when
          autodetect cannot detect your subtitle file.
      --sub-autodetect-file, --no-sub-autodetect-file
                                 Autodetect subtitle files (default enabled)
          Automatically detect a subtitle file, if no
          subtitle filename is specified. (default
          enabled)
      --sub-filter <string>      Subpictures filter module
          This will allow you to add a subpictures
          filter for instance to overlay a logo.
      --audio-language <string>  Audio language
          Give the language of the audio track you want
          to use (comma separted, two or three letter
          country code).
      --sub-language <string>    Subtitle language
          Give the language of the subtitle track you
          want to use (comma separted, two or tree
          letter country code).
      --input-repeat <integer>   Input repetitions
          Number of time the same input will be repeated
      --dvd <string>             DVD device
          This is the default DVD drive (or file) to
          use. Don't forget the colon after the drive
          letter (eg. D:)
      --vcd <string>             VCD device
          This is the default VCD device to use.
      --cd-audio <string>        Audio CD device
          This is the default Audio CD device to use.
      --server-port <integer>    UDP port
          This is the port used for UDP streams. 1234
          by default.
  -6, --ipv6, --no-ipv6          Force IPv6 (default disabled)
          If you check this box, IPv6 will be used by
          default for all UDP and HTTP connections.
          (default disabled)
  -4, --ipv4, --no-ipv4          Force IPv4 (default disabled)
          If you check this box, IPv4 will be used by
          default for all UDP and HTTP connections.
          (default disabled)

 Input
      --access-filter <string>   Access filter module
          This is a legacy entry to let you configure
          access filter modules.
      --high-priority, --no-high-priority
                                 Increase the priority of the process (default
                                 disabled)
          Increasing the priority of the process will
          very likely improve your playing experience
          as it allows VLC not to be disturbed by other
          applications that could otherwise take too
          much processor time. However be advised that
          in certain circumstances (bugs) VLC could
          take all the processor time and render the
          whole system unresponsive which might require
          a reboot of your machine. (default disabled)

 Playlist
  -Z, --random, --no-random      Play files randomly forever (default disabled)
          When selected, VLC will randomly play files
          in the playlist until interrupted. (default
          disabled)
  -L, --loop, --no-loop          Repeat all (default disabled)
          If you want VLC to keep playing the playlist
          indefinitely then enable this option.
          (default disabled)
  -R, --repeat, --no-repeat      Repeat current item (default disabled)
          When this is active, VLC will keep playing
          the current playlist item over and over
          again. (default disabled)
      --play-and-stop, --no-play-and-stop
                                 Play and stop (default disabled)
          Stop the playlist after each played playlist
          item.  (default disabled)
      --open <string>            Default stream
          This option allows you to always open a
          default stream on start-up.
      --auto-preparse, --no-auto-preparse
                                 Automatically preparse files (default enabled)
          This option enables automatic preparsing of
          files added to the playlist (to retrieve some
          metadata). (default enabled)
  -S, --services-discovery <string>
                                 Services discovery modules
          Specifies the services discovery modules to
          load, separated by semi-colons. Typical
          values are sap, hal, ...
      --extraintf <string>       Extra interface modules
          This option allows you to select additional
          interfaces used by VLC. They will be launched
          in the background in addition to the default
          interface. Use a comma separated list of
          interface modules. (common values are logger,
          gestures, sap, rc, http or screensaver)
  -v, --verbose <integer>        Verbosity (0,1,2)
          This option sets the verbosity level (0=only
          errors and standard messages, 1=warnings,
          2=debug).
      --language {auto,en,en_GB,ca,da,de,es,fr,it,ja,ka,ko,nl,oc,pt_BR,ro,ru,tr,zh_CN,zh_TW}
                                 Language
          This option allows you to set the language of
          the interface. The system language is
          auto-detected if "auto" is specified here.
      --advanced, --no-advanced  Show advanced options (default enabled)
          When this option is turned on, the
          preferences and/or interfaces  will show all
          the available options, including those that
          most users should never touch. (default
          enabled)
      --show-intf, --no-show-intf
                                 Show interface with mouse (default disabled)
          If this enabled, the interface will be shown
          when you move the mouse to the edge of the
          screen in fullscreen mode. (default disabled)
  -I, --intf <string>            Interface module
          This option allows you to select the
          interface used by VLC. The default behavior
          is to automatically select the best module
          available.
      --control <string>         Control interfaces
          This option allows you to select control
          interfaces. 

 Hot keys
      --key-fullscreen <integer> Fullscreen
          Select the hotkey to use to swap fullscreen
          state.
      --key-play-pause <integer> Play/Pause
          Select the hotkey to use to swap paused state.
      --key-faster <integer>     Faster
          Select the hotkey to use for fast forward
          playback.
      --key-slower <integer>     Slower
          Select the hotkey to use for slow motion
          playback.
      --key-next <integer>       Next
          Select the hotkey to use to skip to the next
          item in the playlist.
      --key-prev <integer>       Previous
          Select the hotkey to use to skip to the
          previous item in the playlist.
      --key-stop <integer>       Stop
          Select the hotkey to stop the playback.
      --key-jump-extrashort <integer>
                                 Very short backwards jump
          Select the hotkey to make a very short
          backwards jump.
      --key-jump+extrashort <integer>
                                 Very short forward jump
          Select the hotkey to make a very short
          forward jump.
      --key-jump-short <integer> Short backwards jump
          Select the hotkey to make a short backwards
          jump.
      --key-jump+short <integer> Short forward jump
          Select the hotkey to make a short forward
          jump.
      --key-jump-medium <integer>
                                 Medium backwards jump
          Select the hotkey to make a medium backwards
          jump.
      --key-jump+medium <integer>
                                 Medium forward jump
          Select the hotkey to make a medium forward
          jump.
      --key-jump-long <integer>  Long backwards jump
          Select the hotkey to make a long backwards
          jump.
      --key-jump+long <integer>  Long forward jump
          Select the hotkey to make a long forward jump.
      --key-quit <integer>       Quit
          Select the hotkey to quit the application.
      --key-vol-up <integer>     Volume up
          Select the key to increase audio volume.
      --key-vol-down <integer>   Volume down
          Select the key to decrease audio volume.
      --key-vol-mute <integer>   Mute
          Select the key to turn off audio volume.
      --key-audio-track <integer>
                                 Cycle audio track
          Cycle through the available audio
          tracks(languages)
      --key-subtitle-track <integer>
                                 Cycle subtitle track
          Cycle through the available subtitle tracks
      --key-aspect-ratio <integer>
                                 Cycle source aspect ratio
          Cycle through a predefined list of source
          aspect ratios
      --key-crop <integer>       Cycle video crop
          Cycle through a predefined list of crop
          formats
      --key-deinterlace <integer>
                                 Cycle deinterlace modes
          Cycle through all the deinterlace modes
      --extrashort-jump-size <integer>
                                 Very short jump size
          Very short jump "size", in seconds
      --short-jump-size <integer>
                                 Short jump size
          Short jump "size", in seconds
      --medium-jump-size <integer>
                                 Medium jump size
          Medium jump "size", in seconds
      --long-jump-size <integer> Long jump size
          Long jump "size", in seconds
      --bookmark1 <string>       Playlist bookmark 1
          This option allows you to define playlist
          bookmarks.
      --bookmark2 <string>       Playlist bookmark 2
          This option allows you to define playlist
          bookmarks.
      --bookmark3 <string>       Playlist bookmark 3
          This option allows you to define playlist
          bookmarks.
      --bookmark4 <string>       Playlist bookmark 4
          This option allows you to define playlist
          bookmarks.
      --bookmark5 <string>       Playlist bookmark 5
          This option allows you to define playlist
          bookmarks.
      --bookmark6 <string>       Playlist bookmark 6
          This option allows you to define playlist
          bookmarks.
      --bookmark7 <string>       Playlist bookmark 7
          This option allows you to define playlist
          bookmarks.
      --bookmark8 <string>       Playlist bookmark 8
          This option allows you to define playlist
          bookmarks.
      --bookmark9 <string>       Playlist bookmark 9
          This option allows you to define playlist
          bookmarks.
      --bookmark10 <string>      Playlist bookmark 10
          This option allows you to define playlist
          bookmarks.

 ffmpeg audio/video decoder/encoder ((MS)MPEG4,SVQ1,H263,WMV,WMA)
      --ffmpeg-workaround-bugs <integer>
                                 Workaround bugs
          Try to fix some bugs
1  autodetect
2  old
          msmpeg4
4  xvid interlaced
8  ump4 
16 no
          padding
32 ac vlc
64 Qpel chroma
      --ffmpeg-hurry-up, --no-ffmpeg-hurry-up
                                 Hurry up (default disabled)
          Allow the decoder to partially decode or skip
          frame(s) when there is not enough time. It's
          useful with low CPU power but it can produce
          distorted pictures. (default disabled)
      --ffmpeg-pp-q <integer>    Post processing quality
          Quality of post processing. Valid range is 0
          to 6
Higher levels require considerable more
          CPU power, but produce better looking
          pictures.
      --sout-ffmpeg-hq {rd,bits,simple}
                                 Quality level
          Allows you to specify the quality level for
          the encoding of motions vectors (this can
          slow down the encoding very much).
      --sout-ffmpeg-keyint <integer>
                                 Ratio of key frames
          Allows you to specify the number of frames
          that will be coded for one key frame.
      --sout-ffmpeg-bframes <integer>
                                 Ratio of B frames
          Allows you to specify the number of B frames
          that will be coded between two reference
          frames.
      --sout-ffmpeg-hurry-up, --no-sout-ffmpeg-hurry-up
                                 Hurry up (default disabled)
          Allows you to specify if the encoder should
          make on-the-fly quality tradeoffs if your CPU
          can't keep up with the encoding rate. It will
          disable trellis quantization, then the rate
          distortion of motion vectors (hq), and raise
          the noise reduction threshold to ease the
          encoder's task. (default disabled)

 MPEG2 video switcher stream output
      --sout-switcher-files <string>
                                 Files
          Full paths of the files separated by colons.
      --sout-switcher-sizes <string>
                                 Sizes
          List of sizes separated by colons
          (720x576:480x576).
      --sout-switcher-aspect-ratio <string>
                                 Aspect ratio
          Aspect ratio (4:3, 16:9).

 ATSC A/52 (AC-3) audio decoder
      --a52-dynrng, --no-a52-dynrng
                                 A/52 dynamic range compression (default
                                 enabled)
          Dynamic range compression makes the loud
          sounds softer, and the soft sounds louder, so
          you can more easily listen to the stream in a
          noisy environment without disturbing anyone.
          If you disable the dynamic range compression
          the playback will be more adapted to a movie
          theater or a listening room. (default enabled)

 Standard filesystem directory input
      --recursive {none,collapse,expand}
                                 Subdirectory behavior
          Select whether subdirectories must be
          expanded.
none: subdirectories do not appear
          in the playlist.
collapse: subdirectories
          appear but are expanded on first
          play.
expand: all subdirectories are
          expanded.

      --ignore-filetypes <string>
                                 Ignore files with these extensions
          Specify a comma seperated list of file
          extensions. Files with these extensions will
          not be added to playlist when opening a
          directory. This is useful if you add
          directories that contain mp3 albums for
          instance.

 Timeshift
      --timeshift-dir <string>   Timeshift directory
          Directory used to store the timeshift
          temporary files.

 FTP input
      --ftp-user <string>        FTP user name
          Allows you to modify the user name that will
          be used for the connection.
      --ftp-pwd <string>         FTP password
          Allows you to modify the password that will
          be used for the connection.
      --ftp-account <string>     FTP account
          Allows you to modify the account that will be
          used for the connection.

 HTTP input
      --http-proxy <string>      HTTP proxy
          You can specify an HTTP proxy to use. It must
          be of the form http://[user[:pass]@]myproxy.my
          domain:myport/ ; if empty, the http_proxy
          environment variable will be tried.

 Microsoft Media Server (MMS) input
      --mms-maxbitrate <integer> Maximum bitrate
          If this is set, the stream with the maximum
          bitrate under that limit      will be selected

 libshout (icecast) output
      --sout-shout-name <string> Stream-name
          The name this stream/channel will get on the
          icecast server.
      --sout-shout-description <string>
                                 Stream-description
          A description of the stream content.
          (Information about your channel).

 UDP stream output

 SMB input
      --smb-user <string>        SMB user name
          Allows you to modify the user name that will
          be used for the connection.
      --smb-pwd <string>         SMB password
          Allows you to modify the password that will
          be used for the connection.
      --smb-domain <string>      SMB domain
          Allows you to modify the domain/workgroup
          that will be used for the connection.

 Image properties filter
      --contrast <float>         Image contrast (0-2)
          Set the image contrast, between 0 and 2.
          Defaults to 1
      --brightness <float>       Image brightness (0-2)
          Set the image brightness, between 0 and 2.
          Defaults to 1
      --hue <integer>            Image hue (0-360)
          Set the image hue, between 0 and 360.
          Defaults to 0
      --saturation <float>       Image saturation (0-3)
          Set the image saturation, between 0 and 3.
          Defaults to 1
      --gamma <float>            Image gamma (0-10)
          Set the image gamma, between 0.01 and 10.
          Defaults to 1
      --brightness-threshold, --no-brightness-threshold
                                 Enable brightness threshold (default disabled)
          Show black and white pixels with brightness
          as threshold value (default disabled)

 File audio output
      --audiofile-file <string>  Output file
          File to which the audio samples will be
          written to

 AVI demuxer
      --avi-index, --no-avi-index
                                 Force index creation (default disabled)
          Recreate a index for the AVI file. Use this
          if your AVI file is damaged or incomplete
          (not seekable). (default disabled)

 Clone video filter
      --clone-count <integer>    Number of clones
          Select the number of video windows in which
          to clone the video.

 Crop video filter
      --crop-geometry <string>   Crop geometry (pixels)
          Set the geometry of the zone to crop. This is
          set as <width> x <height> + <left offset> +
          <top offset>.
      --autocrop, --no-autocrop  Automatic cropping (default disabled)
          Activate automatic black border cropping.
          (default disabled)

 Deinterlacing video filter
      --deinterlace-mode {discard,blend,mean,bob,linear,x}
                                 Deinterlace mode
          Default deinterlace method to use for local
          playback
      --sout-deinterlace-mode {discard,blend,mean,bob,linear,x}
                                 Deinterlace mode
          Default deinterlace methode to use for
          streaming

 File dumpper
      --demuxdump-file <string>  Dump filename
          Name of the file to which the raw stream will
          be dumped.
      --demuxdump-append, --no-demuxdump-append
                                 Append to existing file (default disabled)
          If the file already exists, it will not be
          overwritten. (default disabled)

 Distort video filter
      --distort-mode {wave,ripple,gradient,edge,hough,psychedelic}
                                 Distort mode
          Distort mode, one of "wave", "ripple",
          "gradient", "edge", "hough" and "psychedelic"
      --distort-gradient-type <integer>
                                 Gradient image type
          Gradient image type (0 or 1)
      --distort-cartoon, --no-distort-cartoon
                                 Apply cartoon effect (default enabled)
          Apply cartoon effect. Used by "gradient" and
          "edge". (default enabled)

 Dummy interface function
      --dummy-quiet, --no-dummy-quiet
                                 Do not open a DOS command box interface
                                 (default disabled)
          By default the dummy interface plugin will
          start a DOS command box. Enabling the quiet
          mode will not bring this command box but can
          also be pretty annoying when you want to stop
          VLC and no video window is open. (default
          disabled)

 DVB subtitles decoder
      --dvbsub-x <integer>       X coordinate of the subpicture
          You can reposition the subpicture by
          providing another value here.
      --dvbsub-y <integer>       Y coordinate of the subpicture
          You can reposition the subpicture by
          providing another value here.
      --sout-dvbsub-x <integer>  X coordinate of the encoded subpicture
          You can reposition the subpicture by
          providing another value here.
      --sout-dvbsub-y <integer>  Y coordinate of encoded the subpicture
          You can reposition the subpicture by
          providing another value here.
      --sout-dvbsub-timeout <integer>
                                 Timeout of subpictures
          Subpictures get a default timeout of 15
          seconds added to their remaining time.This
          will ensure that they are at least the
          specified time visible.

 DVDnav Input
      --dvdnav-angle <integer>   DVD angle
          Allows you to select the default DVD angle.
      --dvdnav-menu, --no-dvdnav-menu
                                 Start directly in menu (default enabled)
          Allows you to start the DVD directly in the
          main menu. This will try to skip all the
          useless warnings introductions. (default
          enabled)

 DVDRead Input (DVD without menu support)
      --dvdread-angle <integer>  DVD angle
          Allows you to select the default DVD angle.

 Equalizer 10 bands
      --equalizer-preset {flat,classical,club,dance,fullbass,fullbasstreble,fulltreble,headphones,largehall,live,party,pop,reggae,rock,ska,soft,softrock,techno}
                                 Equalizer preset
          Equalizer preset

 Fake video decoder
      --fake-file <string>       Image file
          Path of the image file when using the fake
          input.
      --fake-deinterlace, --no-fake-deinterlace
                                 Deinterlace video (default disabled)
          Allows you to deinterlace the image after
          loading. (default disabled)
      --fake-deinterlace-module {deinterlace,ffmpeg-deinterlace}
                                 Deinterlace module
          Specifies the deinterlace module to use.

 Freetype2 font renderer
      --freetype-font <string>   Font
          Filename for the font you want to use
      --freetype-color {0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
                                 Text default color
          The color of the text that will be rendered
          on the video. This must be an hexadecimal
          (like HTML colors). The first two chars are
          for red, then green, then blue. #000000 =
          black, #FF0000 = red, #00FF00 = green,
          #FFFF00 = yellow (red + green), #FFFFFF =
          white
      --freetype-rel-fontsize {20 (Smaller), 18 (Small), 16 (Normal), 12 (Large), 6 (Larger)}
                                 Relative font size
          This is the relative default size of the
          fonts that will be rendered on the video. If
          absolute font size is set, relative size will
          be overriden.
      --freetype-effect {1 (Background), 2 (Outline), 3 (Fat Outline)}
                                 Font Effect
          It is possible to apply effects to the
          renderedtext to improve its readability.

 Mouse gestures control interface
      --gestures-button {left,middle,right}
                                 Trigger button
          You can set the trigger button for mouse
          gestures here.

 GnuTLS TLS encryption layer
      --tls-check-cert, --no-tls-check-cert
                                 Check TLS/SSL server certificate validity
                                 (default enabled)
          This ensures that the server certificate is
          valid (i.e. signed by an approved
          Certification Authority). (default enabled)
      --tls-check-hostname, --no-tls-check-hostname
                                 Check TLS/SSL server hostname in certificate
                                 (default enabled)
          This ensures that the server hostname in
          certificate matches the requested host name.
          (default enabled)

 Goom effect
      --goom-width <integer>     Goom display width
          This allows you to set the resolution of the
          Goom display (bigger resolution will be
          prettier but more CPU intensive).
      --goom-height <integer>    Goom display height
          This allows you to set the resolution of the
          Goom display (bigger resolution will be
          prettier but more CPU intensive).
      --goom-speed <integer>     Goom animation speed
          This allows you to set the animation speed
          (between 1 and 10, defaults to 6).

 Growl Notification Plugin
      --growl-server <string>    Growl server
          This is the host to which Growl notifications
          will be sent. By default, notifications are
          sent locally.
      --growl-password <string>  Growl password
          Growl password on the server.

 Headphone channel mixer with virtual spatialization effect
      --headphone-dim <integer>  Characteristic dimension
          Distance between front left speaker and
          listener in meters.

 Image video output
      --image-out-format {png,jpeg}
                                 Image format
          Set the format of the output image.
      --image-out-ratio <integer>
                                 Recording ratio
          Set the ratio of images that are recorded. 3
          means that one image out of three is recorded.
      --image-out-prefix <string>
                                 Filename prefix
          Set the prefix of the filename. Output
          filename will have the form prefixNUMBER.forma
          t
      --image-out-replace, --no-image-out-replace
                                 Always write to the same file (default
                                 disabled)
          Always write to the same file (default
          disabled)

 File logging
      --logfile <string>         Log filename
          Specify the log filename.
      --logmode {text,html}      Log format
          Specify the log format. Available choices are
          "text" (default) and "html".

 Logo video filter
      --logo-file <string>       Logo filenames
          Full path of the image files to use. Format
          is <image>[,<delay in ms>[,<alpha>]][;<image>[
          ,<delay>[,<alpha>]]][;...] .
      --logo-transparency <integer>
                                 Transparency of the logo
          You can set the logo transparency value here
          (from 0 for full transparency to 255 for full
          opacity).
      --logo-position {0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
                                 Logo position
          You can enforce the logo position on the
          video (0=center, 1=left, 2=right, 4=top,
          8=bottom, you can also use combinations of
          these values).

 Marquee display sub filter
      --marq-marquee <string>    Marquee text
          Marquee text to display
      --marq-position <integer>  Marquee position
          You can enforce the marquee position on the
          video (0=center, 1=left, 2=right, 4=top,
          8=bottom, you can also use combinations of
          these values by adding them).
      --marq-opacity <integer>   Opacity
          The opacity (inverse of transparency) of
          overlay text. 0 = transparent, 255 = totally
          opaque. 
      --marq-color {-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
                                 Text Default Color
          The color of overlay text. 1 byte for each
          color, hexadecimal. #000000 = all colors off,
          0xFF0000 = just Red, 0xFFFFFF = all color on
          [White]
      --marq-size <integer>      Font size, pixels
          Specify the font size, in pixels, with -1 =
          use freetype-fontsize
      --marq-timeout <integer>   Marquee timeout
          Defines the time the marquee must remain
          displayed, in milliseconds. Default value is
          0 (remain forever).

 M-JPEG camera demuxer
      --mjpeg-fps <float>        Frames per Second
          This is the desired frame rate when playing
          MJPEG from a file. Use 0 (this is the default
          value) for a live stream (from a camera).

 MOD demuxer (libmodplug)
      --mod-noisereduction, --no-mod-noisereduction
                                 Noise reduction (default enabled)
          Enable noise reduction algorithm (default
          enabled)
      --mod-reverb, --no-mod-reverb
                                 Reverb (default disabled)
          Enable reverberation (default disabled)
      --mod-megabass, --no-mod-megabass
                                 Mega bass (default disabled)
          Enable megabass mode (default disabled)
      --mod-surround, --no-mod-surround
                                 Surround (default disabled)
          Surround (default disabled)

 Mosaic video sub filter
      --mosaic-alpha <integer>   Alpha blending
          Alpha blending (0 -> 255). Default is 255
      --mosaic-height <integer>  Height in pixels
          Height in pixels
      --mosaic-width <integer>   Width in pixels
          Width in pixels
      --mosaic-position {0 (auto), 1 (fixed)}
                                 Positioning method
          Positioning method. auto: automatically
          choose the best number of rows and columns.
          fixed: use the user-defined number of rows
          and columns.
      --mosaic-rows <integer>    Number of rows
          Number of rows
      --mosaic-cols <integer>    Number of columns
          Number of columns
      --mosaic-keep-aspect-ratio, --no-mosaic-keep-aspect-ratio
                                 Keep aspect ratio when resizing (default
                                 disabled)
          Keep aspect ratio when resizing (default
          disabled)
      --mosaic-keep-picture, --no-mosaic-keep-picture
                                 Keep original size (default disabled)
          Keep original size (default disabled)
      --mosaic-order <string>    Order as a comma separated list of
                                 picture-id(s)
          Order as a comma separated list of
          picture-id(s)
      --mosaic-delay <integer>   Delay
          Pictures coming from the picture video
          outputs will be delayed accordingly (in
          milliseconds). For high values you will need
          to raise file-caching and others.
      --mosaic-bs, --no-mosaic-bs
                                 Enable bluescreen (aka greenscreen or chroma
                                 key) video background replacing (default
                                 disabled)
          Enable bluescreen (aka greenscreen or chroma
          key) video background replacing (default
          disabled)
      --mosaic-bsu <integer>     Bluescreen chroma key U (0-255)
          Bluescreen chroma key U (0-255)
      --mosaic-bsv <integer>     Bluescreen chroma key V (0-255)
          Bluescreen chroma key V (0-255)
      --mosaic-bsut <integer>    Bluescreen chroma key U tolerance
          Bluescreen chroma key U tolerance
      --mosaic-bsvt <integer>    Bluescreen chroma key V tolerance
          Bluescreen chroma key V tolerance

 Motion blur filter
      --blur-factor <integer>    Blur factor (1-127)
          The degree of blurring from 1 to 127.

 Motion detect video filter
      --motiondetect-history <integer>
                                 History parameter
          History parameter, number of frames used for
          detection
      --motiondetect-description <string>
                                 Description file
          Description file, file containing simple
          playlist

 MusePack demuxer
      --mpc-replaygain-type {0 (None), 1 (Title), 2 (Album)}
                                 Replay Gain type
          Musepack can have a title-specific replay
          gain (volume control) or an album-specific
          one. Choose which type you want to use

 MSN Now-Playing
      --msn-format <string>      MSN Title format string
          Format of the string to send to MSN {0}
          Artist, {1} Title, {2} Album. Defaults to
          "Artist - Title" ({0} - {1}).

 OpenGL video output
      --opengl-effect {none,cube,transparent-cube}
                                 Select effect
          Allows you to select different visual effects.

 On Screen Display menu subfilter
      --osdmenu-x <integer>      X coordinate of the OSD menu
          You can move the OSD menu by left-clicking on
          it.
      --osdmenu-y <integer>      Y coordinate of the OSD menu
          You can move the OSD menu by left-clicking on
          it.
      --osdmenu-position {0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
                                 OSD menu position
          You can enforce the OSD menu position on the
          video (0=center, 1=left, 2=right, 4=top,
          8=bottom, you can also use combinations of
          these values).
      --osdmenu-file <string>    OSD menu configuration file
          An OSD menu configuration file that menu
          actions with button images
      --osdmenu-file-path <string>
                                 Path to OSD menu images
          Specify another path to the OSD menu images.
          This will override the path as defined in the
          OSD configuration file.
      --osdmenu-timeout <integer>
                                 Timeout of OSD menu
          OSD menu pictures get a default timeout of 15
          seconds added to their remaining time. This
          will ensure that they are at least the
          specified time visible.

 Parametric Equalizer
      --param-eq-lowf <float>    Low freq (Hz)
      --param-eq-lowgain <float> Low freq gain (Db)
      --param-eq-highf <float>   High freq (Hz)
      --param-eq-highgain <float>
                                 High freq gain (Db)
      --param-eq-f1 <float>      Freq 1 (Hz)
      --param-eq-gain1 <float>   Freq 1 gain (Db)
      --param-eq-q1 <float>      Freq 1 Q
      --param-eq-f2 <float>      Freq 2 (Hz)
      --param-eq-gain2 <float>   Freq 2 gain (Db)
      --param-eq-q2 <float>      Freq 2 Q
      --param-eq-f3 <float>      Freq 3 (Hz)
      --param-eq-gain3 <float>   Freq 3 gain (Db)
      --param-eq-q3 <float>      Freq 3 Q

 Playlist
      --playlist-autostart, --no-playlist-autostart
                                 Auto start (default enabled)
          Automatically start playing the playlist
          content once it's loaded.
 (default enabled)

 Podcasts
      --podcast-urls <string>    Podcast URLs list
          Enter the list of podcasts to retrieve,
          separated by '|' (pipe).

 PORTAUDIO audio output
      --portaudio-device <integer>
                                 Output device
          Portaudio identifier for the output device

 Remote control interface
      --rc-quiet, --no-rc-quiet  Do not open a DOS command box interface
                                 (default disabled)
          By default the rc interface plugin will start
          a DOS command box. Enabling the quiet mode
          will not bring this command box but can also
          be pretty annoying when you want to stop VLC
          and no video window is open. (default
          disabled)

 RSS and Atom feed display
      --rss-urls <string>        RSS/Atom feed URLs
          RSS/Atom feed '|' (pipe) seperated URLs
      --rss-position {0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
                                 Marquee position
          You can enforce the marquee position on the
          video (0=center, 1=left, 2=right, 4=top,
          8=bottom, you can also use combinations of
          these values by adding them).
      --rss-opacity <integer>    Opacity
          The opacity (inverse of transparency) of
          overlay text. 0 = transparent, 255 = totally
          opaque. 
      --rss-color {-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
                                 Text Default Color
          The color of overlay text. 1 byte for each
          color, hexadecimal. #000000 = all colors off,
          0xFF0000 = just Red, 0xFFFFFF = all color on
          [White]
      --rss-size <integer>       Font size, pixels
          Specify the font size, in pixels, with -1 =
          use freetype-fontsize
      --rss-speed <integer>      RSS/Atom feed speed
          RSS/Atom feed speed (bigger is slower)
      --rss-length <integer>     RSS/Atom feed max number of chars displayed
          RSS/Atom feed max number of chars displayed
      --rss-ttl <integer>        Number of seconds between each forced refresh
                                 of the feeds
          Number of seconds between each forced refresh
          of the feeds. If 0, the feeds will never be
          updated.
      --rss-images, --no-rss-images
                                 Display feed images if available (default
                                 enabled)
          Display feed images if available (default
          enabled)

 Skinnable Interface
      --skins2-transparency, --no-skins2-transparency
                                 Enable transparency effects (default disabled)
          You can disable all transparency effects if
          you want. This is mainly useful when moving
          windows does not behave correctly. (default
          disabled)

 Bridge stream output
      --sout-bridge-out-id <integer>
                                 ID
          Specify an identifier for this elementary
          stream.
      --sout-bridge-in-delay <integer>
                                 Delay
          Pictures coming from the picture video
          outputs will be delayed accordingly (in
          milliseconds, >= 100 ms). For high values,
          you will need to raise file-caching and
          others.
      --sout-bridge-in-id-offset <integer>
                                 ID Offset
          Offset to add to the stream IDs specified in
          bridge_out to obtain the stream IDs bridge_in
          will register.

 Mosaic bridge stream output
      --sout-mosaic-bridge-id <string>
                                 ID
          Specify an identifier string for this
          subpicture
      --sout-mosaic-bridge-sar <string>
                                 Sample aspect ratio
          Sample aspect ratio of the destination (1:1,
          3:4, 2:3).

 RTP stream output
      --sout-rtp-mp4a-latm, --no-sout-rtp-mp4a-latm
                                 MP4A LATM (default disabled)
          This allows you to stream MPEG4 LATM audio
          streams (see RFC3016). (default disabled)

 Standard stream output
      --sout-standard-access <string>
                                 Output access method
          This is the output access method that will be
          used.
      --sout-standard-mux <string>
                                 Output muxer
          This is the muxer that will be used.
      --sout-standard-dst <string>
                                 Output destination
          This is the destination (URL) that will be
          used for the stream.

 Transcode stream output
      --sout-transcode-venc <string>
                                 Video encoder
          This is the video encoder module that will be
          used (and its associated options).
      --sout-transcode-vcodec <string>
                                 Destination video codec
          This is the video codec that will be used.
      --sout-transcode-vb <integer>
                                 Video bitrate
          Target bitrate of the transcoded video stream.
      --sout-transcode-scale <float>
                                 Video scaling
          Scale factor to apply to the video while
          transcoding (eg: 0.25)
      --sout-transcode-fps <float>
                                 Video frame-rate
          Target output frame rate for the video stream.
      --sout-transcode-hurry-up, --no-sout-transcode-hurry-up
                                 Hurry up (default enabled)
          The transcoder will drop frames if your CPU
          can't keep up with the encoding rate.
          (default enabled)
      --sout-transcode-deinterlace, --no-sout-transcode-deinterlace
                                 Deinterlace video (default disabled)
          Deinterlace the video before encoding.
          (default disabled)
      --sout-transcode-deinterlace-module {deinterlace,ffmpeg-deinterlace}
                                 Deinterlace module
          Specify the deinterlace module to use.
      --sout-transcode-vfilter <string>
                                 Video filter
          Video filters will be applied to the video
          streams (after overlays are applied). You
          must enter a comma-separated list of filters.
      --sout-transcode-canvas-aspect <string>
                                 Video canvas aspect ratio
          This sets aspect (like 4:3) of the video
          canvas and letterbox the video accordingly.
      --sout-transcode-aenc <string>
                                 Audio encoder
          This is the audio encoder module that will be
          used (and its associated options).
      --sout-transcode-acodec <string>
                                 Destination audio codec
          This is the audio codec that will be used.
      --sout-transcode-ab <integer>
                                 Audio bitrate
          Target bitrate of the transcoded audio stream.
      --sout-transcode-channels <integer>
                                 Audio channels
          Number of audio channels in the transcoded
          streams.
      --sout-transcode-audio-sync, --no-sout-transcode-audio-sync
                                 Synchronise on audio track (default disabled)
          This option will drop/duplicate video frames
          to synchronise the video track on the audio
          track. (default disabled)
      --sout-transcode-senc <string>
                                 Subtitles encoder
          This is the subtitles encoder module that
          will be used (and its associated options).
      --sout-transcode-scodec <string>
                                 Destination subtitles codec
          This is the subtitles coded that will be used.
      --sout-transcode-soverlay, --no-sout-transcode-soverlay
                                 Destination subtitles codec (default disabled)
          This is the subtitles coded that will be
          used. (default disabled)
      --sout-transcode-sfilter <string>
                                 Overlays
          This allows you to add overlays (also known
          as "subpictures" on the transcoded video
          stream. The subpictures produced by the
          filters will be overlayed directly onto the
          video. You must specify a comma-separated
          list of subpicture modules
      --sout-transcode-osd, --no-sout-transcode-osd
                                 OSD menu (default disabled)
          Stream the On Screen Display menu (using the
          osdmenu subpicture module). (default disabled)

 Text subtitles decoder
      --subsdec-align {0 (Center), 1 (Left), 2 (Right)}
                                 Subtitles justification
          Set the justification of subtitles
      --subsdec-encoding {Default,ASCII,UTF-8,,ISO-8859-1,CP1252,MacRoman,MacIceland,ISO-8859-15,,ISO-8859-2,CP1250,MacCentralEurope,MacCroatian,MacRomania,,ISO-8859-5,CP1251,MacCyrillic,MacUkraine,KOI8-R,KOI8-U,KOI8-RU,,ISO-8859-6,CP1256,MacArabic,,ISO-8859-7,CP1253,MacGreek,,ISO-8859-8,CP1255,MacHebrew,,ISO-8859-9,CP1254,MacTurkish,,ISO-8859-13,CP1257,,ISO-2022-JP,ISO-2022-JP-1,ISO-2022-JP-2,EUC-JP,SHIFT_JIS,,ISO-2022-CN,ISO-2022-CN-EXT,EUC-CN,EUC-TW,BIG5,BIG5-HKSCS,,ISO-2022-KR,EUC-KR,,MacThai,KOI8-T,,ISO-8859-3,ISO-8859-4,ISO-8859-10,ISO-8859-14,ISO-8859-16,,CP850,CP862,CP866,CP874,CP932,CP949,CP950,CP1133,CP1258,,Macintosh,,UTF-7,UTF-16,UTF-16BE,UTF-16LE,UTF-32,UTF-32BE,UTF-32LE,C99,JAVA,UCS-2,UCS-2BE,UCS-2LE,UCS-4,UCS-4BE,UCS-4LE,,HZ,GBK,GB18030,JOHAB,ARMSCII-8,Georgian-Academy,Georgian-PS,TIS-620,MuleLao-1,VISCII,TCVN,HPROMAN8,NEXTSTEP}
                                 Subtitles text encoding
          Set the encoding used in text subtitles
      --subsdec-autodetect-utf8, --no-subsdec-autodetect-utf8
                                 UTF-8 subtitles autodetection (default
                                 enabled)
          This enables automatic detection of UTF-8
          encoding within subtitles files. (default
          enabled)
      --subsdec-formatted, --no-subsdec-formatted
                                 Formatted Subtitles (default enabled)
          Some subtitle formats allow for text
          formatting. VLC partly implements this, but
          you can choose to disable all formatting.
          (default enabled)

 Theora video decoder
      --sout-theora-quality <integer>
                                 Encoding quality
          Allows you to specify a quality between 1
          (low) and 10 (high), instead of specifying a
          particular bitrate. This will produce a VBR
          stream.

 Time display sub filter
      --time-position {0 (Center), 1 (Left), 2 (Right), 4 (Top), 8 (Bottom), 5 (Top-Left), 6 (Top-Right), 9 (Bottom-Left), 10 (Bottom-Right)}
                                 Time position
          You can enforce the time position on the
          video (0=center, 1=left, 2=right, 4=top,
          8=bottom, you can also use combinations of
          these values by adding them).
      --time-opacity <integer>   Opacity
          The opacity (inverse of transparency) of
          overlay text. 0 = transparent, 255 = totally
          opaque. 
      --time-color {-268435456 (Default), 0 (Black), 8421504 (Gray), 12632256 (Silver), 16777215 (White), 8388608 (Maroon), 16711680 (Red), 16711935 (Fuchsia), 16776960 (Yellow), 8421376 (Olive), 32768 (Green), 32896 (Teal), 65280 (Lime), 8388736 (Purple), 128 (Navy), 255 (Blue), 65535 (Aqua)}
                                 Text Default Color
          The color of overlay text. 1 byte for each
          color, hexadecimal. #000000 = all colors off,
          0xFF0000 = just Red, 0xFFFFFF = all color on
          [White]
      --time-size <integer>      Font size, pixels
          Specify the font size, in pixels, with -1 =
          use freetype-fontsize

 Video transformation filter
      --transform-type {90,180,270,hflip,vflip}
                                 Transform type
          One of '90', '180', '270', 'hflip' and 'vflip'

 MPEG Transport Stream demuxer
      --ts-dump-file <string>    Filename of dump
          Specify a filename where to dump the TS in.
      --ts-dump-append, --no-ts-dump-append
                                 Append (default disabled)
          If the file exists and this option is
          selected, the existing file will not be
          overwritten. (default disabled)

 Libtwolame audio encoder
      --sout-twolame-quality <float>
                                 Encoding quality
          Allows you to specify a quality between 0.0
          (high) and 50.0 (low), instead of specifying
          a particular bitrate. This will produce a VBR
          stream.
      --sout-twolame-mode {0 (Stereo), 1 (Dual mono), 2 (Joint stereo)}
                                 Stereo mode
          Select how stereo streams will be handled
      --sout-twolame-vbr, --no-sout-twolame-vbr
                                 VBR mode (default disabled)
          By default the encoding is CBR. (default
          disabled)
      --sout-twolame-psy <integer>
                                 Psycho-acoustic model
          Integer from -1 (no model) to 4.

 Visualizer filter
      --effect-width <integer>   Video width
          The width of the effects video window, in
          pixels.
      --effect-height <integer>  Video height
          The height of the effects video window, in
          pixels.

 Vorbis audio decoder
      --sout-vorbis-quality <integer>
                                 Encoding quality
          Allows you to specify a quality between 1
          (low) and 10 (high), instead of specifying a
          particular bitrate. This will produce a VBR
          stream.
      --sout-vorbis-max-bitrate <integer>
                                 Maximum encoding bitrate
          Allows you to specify a maximum bitrate in
          kbps. Useful for streaming applications.
      --sout-vorbis-min-bitrate <integer>
                                 Minimum encoding bitrate
          Allows you to specify a minimum bitrate in
          kbps. Useful for encoding for a fixed-size
          channel.
      --sout-vorbis-cbr, --no-sout-vorbis-cbr
                                 CBR encoding (default disabled)
          Allows you to force a constant bitrate
          encoding (CBR). (default disabled)

 Wall video filter
      --wall-cols <integer>      Number of columns
          Select the number of horizontal video windows
          in which to split the video.
      --wall-rows <integer>      Number of rows
          Select the number of vertical video windows
          in which to split the video.
      --wall-element-aspect <string>
                                 Element aspect ratio
          The aspect ratio of the individual displays
          building the display wall

 wxWidgets interface module
      --wx-embed, --no-wx-embed  Embed video in interface (default enabled)
          Embed the video inside the interface instead
          of having it in a separate window. (default
          enabled)
      --wx-bookmarks, --no-wx-bookmarks
                                 Show bookmarks dialog (default disabled)
          Show bookmarks dialog when the interface
          starts. (default disabled)
      --wx-taskbar, --no-wx-taskbar
                                 Show taskbar entry (default enabled)
          Show taskbar entry (default enabled)
      --wx-extended, --no-wx-extended
                                 Show extended GUI (default disabled)
          Show extended GUI (default disabled)
      --wx-playlist-view {0 (Normal), 1 (Embedded), 2 (Both)}
                                 Playlist view
          There are two possible playlist views in the
          interface : the normal playlist (separate
          window), or an embedded playlist (within the
          main interface, but with less features. You
          can select which one will be available on the
          toolbar (or both).
      --wx-systray, --no-wx-systray
                                 Show systray icon (default disabled)
          Show systray icon (default disabled)

 H.264/MPEG4 AVC encoder (using x264 library)
      --sout-x264-keyint <integer>
                                 Maximum GOP size
          Sets maximum interval between
          IDR-frames.Larger values save bits, thus
          improve quality for a given bitrate at the
          cost of seeking precision.
      --sout-x264-min-keyint <integer>
                                 Minimum GOP size
          Sets minimum interval between IDR-frames. In
          H.264, I-frames do not necessarily bound a
          closed GOP because it is allowable for a
          P-frame to be predicted from more frames than
          just the one frame before it (also see
          frameref). Therefore, I-frames are not
          necessarily seekable. IDR-Frames restrict
          subsequent P-frames from referring to any
          frame prior to the IDR-Frame. 
If scenecuts
          appear within this interval, they are still
          encoded as I-frames, but do not start a new
          GOP.
      --sout-x264-scenecut <integer>
                                 How aggressively to insert extra I-frames (-1
                                 to 100)
          Scene-cut detection. Controls how
          aggressively to insert extra I-frames. With
          small values of scenecut, the codec often has
          to force an I-frame when it would exceed
          keyint. Good values of scenecut may find a
          better location for the I-frame. Large values
          use more I-frames than necessary, thus
          wasting bits. -1 disables scene-cut
          detection, so I-frames are be inserted only
          every other keyint frames, which probably
          leads to ugly encoding artifacts.
      --sout-x264-bframes <integer>
                                 Number of B-frames between I and P (1 to 16)
          Number of consecutive B-frames between I and
          P-frames.
      --sout-x264-b-adapt, --no-sout-x264-b-adapt
                                 Adaptive B-frame decision (default enabled)
          If this is on, the specified number of
          consecutive B-frames will always be used,
          except possibly before an I-frame.  (default
          enabled)
      --sout-x264-b-bias <integer>
                                 Influences how often B-frames are used
          Bias the choice to use B-frames. Positive
          values cause more B-frames, negative values
          cause less B-frames. 
      --sout-x264-bpyramid, --no-sout-x264-bpyramid
                                 Keep some B-frames as references (default
                                 disabled)
          Allows B-frames to be used as references for
          predicting other frames. Keeps the middle of
          2+ consecutive B-frames as a reference, and
          reorders frame appropriately. (default
          disabled)
      --sout-x264-cabac, --no-sout-x264-cabac
                                 CABAC (default enabled)
          CABAC (Context-Adaptive Binary Arithmetic
          Coding). Slightly slows down encoding and
          decoding, but should save 10-15% bitrate.
          (default enabled)
      --sout-x264-ref <integer>  Number of reference frames (1 to 16)
          Number of previous frames used as predictors.
          This is effective in Anime, but seems to make
          little difference in live-action source
          material. Some decoders are unable to deal
          with large frameref values.
      --sout-x264-nf, --no-sout-x264-nf
                                 No loop filter (enabling turns off the
                                 deblocking loop filter) (default disabled)
          Deblocking loop filter (increases quality).
          (default disabled)
      --sout-x264-qp <integer>   Set QP (0=lossless) (0 to 51)
          This selects the quantizer to use. Lower
          values result in better fidelity, but higher
          bitrates. 26 is a good default value.
      --sout-x264-crf <integer>  Quality-based VBR (nominal QP) (0 to 51)
          1-pass Quality-based VBR.
      --sout-x264-qpmin <integer>
                                 Set min QP
          Minimum quantizer, 15/35 seems to be a useful
          range.
      --sout-x264-qpmax <integer>
                                 Set max QP
          Maximum quantizer parameter.
      --sout-x264-qpstep <integer>
                                 Set max QP step
          Max QP step between frames.
      --sout-x264-ratetol <float>
                                 Allowed variance of average bitrate
          Sets the allowed variance in average. bitrate.
      --sout-x264-vbv-maxrate <integer>
                                 Max local bitrate
          Sets a maximum local bitrate in kbits/s.
      --sout-x264-vbv-bufsize <integer>
                                 Size of VBV buffer
          Sets an averaging period for the maximum
          local bitrate in kbits/s.
      --sout-x264-vbv-init <float>
                                 Initial VBV buffer occupancy
          Sets the initial buffer occupancy as a
          fraction of the buffer size.
      --sout-x264-ipratio <float>
                                 QP factor between I and P
          QP factor between I and P.
      --sout-x264-pbratio <float>
                                 QP factor between P and B
          QP factor between P and B.
      --sout-x264-chroma-qp-offset <integer>
                                 QP difference between chroma and luma
          QP difference between chroma and luma.
      --sout-x264-qcomp <float>  QP curve compression (0.0=CBR to 1.0=QCP)
          QP curve compression.
      --sout-x264-cplxblur <float>
                                 Reduce fluctuations in QP (before curve
                                 compression)
          Temporally blur complexity.
      --sout-x264-qblur <float>  Reduce fluctuations in QP (after curve
                                 compression)
          Temporally blur quants.
      --sout-x264-analyse {,none,fast,normal,slow,all}
                                 Partitions to consider
          Partitions to consider in analyse mode: 
 -
          none  : 
 - fast  : i4x4
 - normal:
          i4x4,p8x8,(i8x8)
 - slow  : i4x4,p8x8,(i8x8),b
          8x8
 - all   : i4x4,p8x8,(i8x8),b8x8,p4x4
(p4x
          4 requires p8x8. i8x8 requires 8x8dct).
      --sout-x264-direct {,none,spatial,temporal}
                                 Direct MV prediction mode
          Direct MV prediction mode. 
      --sout-x264-weightb, --no-sout-x264-weightb
                                 Weighted prediction for B-frames (default
                                 disabled)
          Weighted prediction for B-frames. (default
          disabled)
      --sout-x264-me {,dia,hex,umh,esa}
                                 Integer pixel motion estimation method
          Selects the motion estimation algorithm:  -
          dia: diamond search, radius 1 (fast)
 - hex:
          hexagonal search, radius 2
 - umh: uneven
          multi-hexagon search (better but slower)
 -
          esa: exhaustive search (extremely slow,
          primarily for testing)

      --sout-x264-merange <integer>
                                 Maximum motion vector search range (0 to 64)
          Maximum distance to search for motion
          estimation, measured from predicted
          position(s). Default of 16 is good for most
          footage, high motion sequences may benefit
          from settings between 24-32.
      --sout-x264-subme <integer>
                                 Subpixel motion estimation and partition
                                 decision quality (1 to 6)
          This parameter controls quality versus speed
          tradeoffs involved in the motion estimation
          decision process (lower = quicker and higher
          = better quality).
      --sout-x264-b-rdo, --no-sout-x264-b-rdo
                                 RD based mode decision for B-frames. Requires
                                 subme 6 (default disabled)
          RD based mode decision for B-frames. 
          (default disabled)
      --sout-x264-mixed-refs, --no-sout-x264-mixed-refs
                                 Decide references on a per partition basis
                                 (default disabled)
          Allows each 8x8 or 16x8 partition to
          independently select a reference frame, as
          opposed to only one ref per macroblock.
          (default disabled)
      --sout-x264-chroma-me, --no-sout-x264-chroma-me
                                 Ignore chroma in motion estimation (default
                                 enabled)
          Chroma ME for subpel and mode decision in
          P-frames. (default enabled)
      --sout-x264-bime, --no-sout-x264-bime
                                 Jointly optimize both MVs in B-frames
                                 (default disabled)
          Joint bidirectional motion refinement.
          (default disabled)
      --sout-x264-8x8dct, --no-sout-x264-8x8dct
                                 Adaptive spatial transform size (default
                                 disabled)
          SATD-based decision for 8x8 transform in
          inter-MBs. (default disabled)
      --sout-x264-trellis <integer>
                                 Trellis RD quantization (0,1,2). Requires
                                 CABAC
          Trellis RD quantization: 
 - 0: disabled
 -
          1: enabled only on the final encode of a MB

          - 2: enabled on all mode decisions

      --sout-x264-fast-pskip, --no-sout-x264-fast-pskip
                                 Early SKIP detection on P-frames (default
                                 enabled)
          Early SKIP detection on P-frames. (default
          enabled)
      --sout-x264-nr <integer>   Noise reduction
          Dct-domain noise reduction. Adaptive
          pseudo-deadzone.
      --sout-x264-asm, --no-sout-x264-asm
                                 CPU optimizations (default enabled)
          CPU optimizations. (default enabled)
      --sout-x264-psnr, --no-sout-x264-psnr
                                 PSNR calculation (default disabled)
          This has no effect on actual encoding
          quality, it just prevents the stats from
          being calculated (for speed). (default
          disabled)
      --sout-x264-verbose, --no-sout-x264-verbose
                                 Print stats for each frame (default disabled)
          Print stats for each frame. (default disabled)

 DirectShow input
      --dshow-vdev {,none}       Video device name
          You can specify the name of the video device
          that will be used by the DirectShow plugin.
          If you don't specify anything, the default
          device will be used.
      --dshow-adev {,none}       Audio device name
          You can specify the name of the audio device
          that will be used by the DirectShow plugin.
          If you don't specify anything, the default
          device will be used.
      --dshow-size <string>      Video size
          You can specify the size of the video that
          will be displayed by the DirectShow plugin.
          If you don't specify anything the default
          size for your device will be used.
</nowiki>