SoC 2011/Stereoscopic Video
This project is part of Google Summer of Code 2011.
|
Contents
Building from Source
At the present state you must acquire the source code of the stereoscopic 3D branch and build it yourself. [1]
There are build instructions in a file named 'STEREOSCOPY README' but I'll also repeat the instructions here.
Build Environment
I use 32-bit MSYS/x86 Windows 7. To set up your build environment first follow through the instructions on [Win32CompileMSYSNew] to make sure you're able to build VLC successfully on your system.
The following build instructions should work on any Windows system.
Building
Create a new empty directory somewhere, and at the MSYS terminal type:
git pull git://github.com/MessiahAndrw/Stereoscopic-VLC.git
To bootstrap the build I use the following:
cd vlc cp -v /usr/win32/share/aclocal/* m4/ cp -v /usr/share/aclocal/* m4/ PATH=/usr/win32/bin:$PATH ./bootstrap
Then to configure:
sh extras/package/win32/configure-msys.sh
Finally to build:
PATH=/usr/win32/bin:$PATH make package-win32 -j6
(The -j6 switch is optional and tells makefile to use 6 threads, it speeds up the build time on my 6-core machine.)
'make package-win32' will exit with the following error but that's normal and VLC has still been built:
cp: cannot stat `./npapi-vlc/installed/lib/npvlc.dll': No such file or directory
If everything else was successful you will now have built VLC with stereoscopic support! You will find this build in the directory 'vlc-1.2.0-git'.
Note on 3D Vision support
nVidia 3D Vision only activates for windowed-mode programs which are supported by the nVidia driver. At the present state VLC is not supported by the nVidia driver. However, the driver only performs a simple file-name check of the application, so as a workaround you can rename vlc.exe to the same file-name as a supported application. This can be done simply by:
cd vlc-1.2.0-git mv vlc.exe wow.exe
Splitting
To play a stereoscopic 3D video you must tell the stereoscopy module how to get the image for each eye. The stereoscopic module is takes a 2D input picture, and produces 2 output pictures (one for the left eye, and one for the right eye).
Command line
To enable the stereoscopic module you should add the following command line parameters when you start vlc:
--video-filter="stereoscopy" --stereoscopy-left="<left>" --stereoscopy-right="<right>"
Where <left> and <right> are valid input formats (see the table below).
QT4
You can configure the stereoscopy module through the QT4 interface. To do this, open the 'Tools' menu and click on 'Effects and Filters'. In the 'Adjustments and Effects' dialog that opens navigate to the 'Video Effects' tab. Then find the sub-tab titled 'Stereoscopy'. Check 'Split' to enable the stereoscopy module to split the image into separate left and right frames. Select your video's input formats for the 'Left Eye and the 'Right Eye'.
Input formats
| Source | Extracted Image | Format name | Description |
|
|
blue | The eye is encoded into the blue channel of the image and returned as a blue image. |
|
|
cyan | The eye is encoded into the blue and green channels of the image returned as a cyan image. |
|
|
green | The eye is encoded into the green channel of the image and returned as a green image. |
|
|
magenta | The eye is encoded into the red and blue channels of the image returned as a magenta image. |
|
|
|
red | The eye is encoded into the red channel of the image and returned as a red image. |
|
|
yellow | The eye is encoded into the red and green channels of the image returned as a yellow image. |
|
|
|
blue-gray | The eye is encoded into the blue channel and returned as a grayscale image. |
|
|
|
cyan-gray | The eye is encoded into the blue and green channels of the image and returned as a grayscale image. |
|
|
|
green-gray | The eye is encoded into the green channel of the image and returned as a grayscale image. |
|
|
|
magenta-gray | The eye is encoded into the red and blue channels of the image and returned as a grayscale image. |
|
|
|
red-gray | The eye is encoded into the red channel of the image and returned a grayscale image. |
|
|
|
yellow-gray | The eye is encoded into the red and green channels of the image and returned as a grayscale image. |
|
|
|
cyan-fill | The eye is encoded into the blue and green channels of the image and returned as a full colour image. The missing red channel is filled in with the average of the blue and green channels. |
|
|
|
magenta-fill | The eye is encoded into the red and blue channels of the image and returned as a full colour image. The missing green channel is filled in with the average of the red and blue channels. |
|
|
|
yellow-fill | The eye is encoded into the red and green channels of the image and returned as a full colour image. The missing blue channel is filled in with the average of the red and green channels. |
|
|
left | The eye is encoded into the left half of the image. Assumes the source is half-SBS but the aspect ratio will need to be halved for full-SBS. |
|
|
|
right | The eye is encoded into the left half of the image. Assumes the source is half-SBS but the aspect ratio will need to be halved for full-SBS. |
|
|
top | The eye is encoded into the right half of the image. Assumes the source is half-SBS but the aspect ratio will need to be halved for full-SBS. |
|
|
|
bottom | The eye is encoded into the bottom half of the image. Assumes the source is half-SBS but the aspect ratio will need to be halved for full-SBS. |
Developer notes
picture_t contains a new field i_eye that is the eye the picture represents. Valid values at the moment are:
| 0 | The picture is 2D. |
| 1 | The picture is destined for the left eye. |
| 2 | The picture is destined for the right eye. |
The default value for i_eye is 0, and all present video codecs output frames where i_eye is 0. It is up to the stereoscopy module to split it into left and right. But it's possible for someone to develop a video codec that output pictures where i_eye>0, for example for a container format where the data is stored as separate left/right images. In this case the stereoscopy module does nothing, and forwards the pictures on as is.
nVidia 3D Vision
The focus of the Google SoC project has been on nVidia 3D Vision. To use 3D Vision you require the following:
- A compatible nVidia GPU
- nVidia 3D Vision Kit (the glasses you wear)
- A 120Hz LCD or 100Hz CRT monitor
- Windows
You also have to rename 'vlc.exe' since VLC isn't yet supported by the nVidia drivers. I'd recommend 'wow.exe' or 'googleearth.exe'. Also, make sure you have 3D Vision enabled in the nVidia control panel.
3D Vision will work straight out the box with the Direct3D vout. You don't need to do anything special, it'll activate as soon as the Direct3D vout starts receiving stereoscopic frames.
Planned Features
- A vout-independent anaglyph combining filter. This will combine the images for both eyes into a single anaglyph image before being passed to the vout. This will make it possible to display stereoscopic content with non-stereoscopic-aware vouts.
- Quad-buffered OpenGL. This seems trivial enough to implement but I'll need a supporting video card!
- 3D over HDMI. I will need to investigate this and experiment (nVidia 3DTV Play, AMD, non-Windows platforms).
- Other proprietary shutter glasses'. For example e-Dimensional.
Troubleshooting & Support
There are several issues I am aware of. If you need support directly from me or have any enquiries then feel free to e-mail me directly at messiahandrw-at-gmail-dot-com (also mention Stereoscopic VLC in the subject so I don't mistake it for spam).
VLC Crashes when I click stop
I know about this bug and I'm trying to fix it, so stay tuned!
The frame rate is too slow
The stereoscopy module is alternating outputting left and right frames, because VLC starts to drop frames when I start doubling the frame rate. I'm working on a way around this (and if you're a developer I'd love for some input on this!)
My Video is black!
Either there's a bug I don't know about, or the stereoscopy module doesn't support your particular colour encoding. Check VLC's messages to see if anything is being reported (Tools > Messages). Either way, e-mail me and I'll get straight on to it!
3D Vision isn't working
This could be any number of things:
- 3D Vision is not enabled in the nVidia control panel.
- You haven't renamed vlc.exe (see above).
- You're not using the Direct3D vout.
- The stereoscopy module is turned off.
- You don't have the latest nVidia drivers.
I'd love to solve your issue, but please check VLC's messages for any warnings and errors before contacting me.
