View source for MacOSCompile

This is an '''howto''' to compile {{VLC}} on ''Mac OS X'', focused on '''VLC 1.2''' and newer. 

== Pre-requisites  ==

=== Apple  ===

*You need at least MacOSX 10.5.<br>'''10.6''', '''Snow Leopard''' is strongly recommended, though. 
*'''Developer Tools from Apple''' from http://developer.apple.com/technology/xcode.html<br>''Xcode3'' and ''Xcode4'' should be fine.

=== GCC 4.2 on Xcode 4.2  ===

If you are on Xcode 4.2 with no previous Xcode installation, you '''NEED''' gcc-4.2 that isn't installed anymore. 

Please install it from [https://github.com/kennethreitz/osx-gcc-installer/downloads OSX-GCC installer]. 

 $ gcc-4.2 --version

=== Git  ===

You need to get [http://git-scm.com/ Git] to clone VLC. 

You can use [http://mxcl.github.com/homebrew/ homebrew] as: 

 $ brew install git

== [[GetTheSource|Get the source code]]  ==

  $ git clone git://git.videolan.org/vlc.git

== Additional development tools  ==

You need development tools, notably all the autotools, to build VLC correctly.
 
Here is how:
 $ cd vlc/extras/tools
 $ ./bootstrap
 $ make
 $ cd ../..

'''Important''': set the new PATH.
 $ export PATH=$PWD/extras/tools/build/bin:$PATH

== SDK selection and 32/64 bits  ==

=== SDK selection ===

If you want to use the 10.6 SDK (your VLC will only run on 10.6 and more recent computers): 

 $ export OSX_VERSION=10.6

You can do the same for '''10.5''', but please check that you have ''MacOSX10.5.sdk'' installed in ''/Developer/SDKs/'' . If you are using Xcode 4.2, you can [http://stackoverflow.com/a/6293605 install the 10.5 sdk] with the .dmg from Xcode3. 

=== 32/64bits selection  ===

The instructions below will build a 64 bits binary using 10.6 (Leopard) SDK. This is reflected by using host and build variables '''x86_64-apple-darwin10'''. 

This "triplet" is ARCHITECTURE-apple-SYSTEM. 

'''ARCHITECTURE''' 

*<code>x86_64</code> represents Intel 64bits. 
*<code>i686</code> represents Intel 32bits. 
*<code>powerpc</code> represents PowerPC 32bits.

'''SDK SYSTEM''' 

*<code>darwin9</code> represents MacOSX 10.5. 
*<code>darwin10</code> represents MacOSX 10.6.

So to make a PowerPC build, you would use '''powerpc-apple-darwin9'''. So to make a intel32 build for 10.5+, you would use '''i686-apple-darwin9'''. So to make a intel64 build for 10.6+, you would use '''x86_64-apple-darwin10'''. 

== Prepare [[Contrib Status|3rd party libraries]]  ==

Before compiling VLC, you need lots of other libraries. Here is how to get them: 

  $ cd contrib
  $ mkdir -p osx &amp;&amp; cd osx
  $ ../bootstrap --host=x86_64-apple-darwin10 --build=x86_64-apple-darwin10

=== Prebuilt libraries (recommended) ===

If you want to download a prebuilt package of all the needed libraries. 

  $ make prebuilt

=== Build your own libraries (not for the faint-hearted) ===

If you want to build from source a package in the contribs: 

  $ make -j4 .gettext
  $ export PATH=$PWD/../x86_64-apple-darwin10/bin:$PATH

Then: 

  $ make -j4

If you had no errors, the 3rd party libraries (contrib) are built correctly and you can proceed to the next step.

=== Go Back  ===

Go back to the VLC source directory: 

  $ cd ../..

== Bootstrap VLC  ==

This will create the configure script: 

  $ ./bootstrap

== Configure the VLC build  ==

Create a build folder: 

  $ mkdir -p build &amp;&amp; cd build

To list the different options of configure: 

  $ ../extras/package/macosx/configure.sh --help

To build a 64 bits binary: 

  $ ../extras/package/macosx/configure.sh --enable-debug --host=x86_64-apple-darwin10 --build=x86_64-apple-darwin10

== Build VLC  ==

Just do:
  $ make -j4

and wait...

== Package VLC Application for Mac  ==

If you want to share the application with another user or another computer: 

  $ make VLC-release.app

If you want a disk-image: 

  $ make package-macosx

Respectively <code>make package-macosx-plugin</code> for the Safari/Mozilla plugin. 

== What's wrong: troubleshooting  ==

=== Xcode path  ===

Starting with Leopard, Xcode may be installed to a custom location on the administrator's choice. While this is non-problematic for ordinary Xcode projects, VLC needs a little help. You have to place extra symbolic links in /Developer pointing to your custom location for these folders: 

<code>usr, Headers, Private, SDKs, Tools, Makefiles</code> 

You can easily create these links by executing the following command for each folder (whereas theFolder is one of these six): 

<code>ln -s /full/path/to/Developer/theFolder /Developer/theFolder</code> 

=== Xcode version  ===

Please make sure that you are using the latest Xcode3 or the latest version of Xcode4 to compile VLC 

=== 3rd party packagers and PATH  ===

'''Pay careful attention to remove any reference to 3rd party package managersfrom your environment.''' This is important to avoid conflicts between your package manager (homebrew, fink, macports...) and the contrib package manager we use to build our contrib. 

It shouldn't be necessary, but it can happen. 

'''git must still be accessible though!''' 

 $ unset PKG_CONFIG_PATH
 $ unset PKG_CONFIG_LIBDIR
 $ export PATH=$PWD/build/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin

=== QTsound compilation on X.5  ===

MacOS X.5.SDK is broken - 2 options exist:

Option 1:

*Download the MacOS10.6.sdk and get QTCaptureDecompressedAudioOutput.h from ''/Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/QTKit.framework/Headers/'' and move it to ''/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/QTKit.framework/Headers/''

*Edit ''/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/QTKit.framework/Headers/QTKit.h'' and add the

 #import &lt;QTKit/QTCaptureDecompressedAudioOutput.h&gt; where needed.

Option 2:

*Configure the VLC build to explicitly use the MacOS10.6.sdk by adding the following flag:
 --with-macosx-sdk=/Developer/SDKs/MacOSX10.6.sdk

=== Cross-Compilation to PPC from X.6 intel ===
If you want to compile VLC for PPC, based on a X.6 intel, you need to tweak a few things since Apple broke it.

'''This is VERY advanced stuff!'''

==== Pre-requisites ====
Be sure to:
* have X.6.8
* Xcode 4.2 installed in the normal ''/Developers'' location
* Xcode 3 installed in ''/Xcode3'' location
* MacOS X.6 and X.5 SDK installed in ''/Developers/SDKs/'' , as explained above (SDK selection).

==== GNU AS ====
Using this out of the box will not work because '''AS''' for ppc is broken on the default setup. Here is how to fix it:
 cd /usr/libexec/as
 sudo mkdir ppc
 cd ppc
 sudo ln -sf /Xcode3/usr/bin/as as


[[Category:Building]] [[Category:Coding]]