View source for Git

[https://git-scm.com/ Git] is a free and open source [[wikipedia:Revision_control|version control system]]. It is used by programmers to keep track of the different versions of the files composing a software.

== Basic Git usage ==

If you are using '''Windows''', please read the [[Git Windows]] page.

=== Getting VLC or x264 source code via Git ===
 
 {{$}} git clone https://git.videolan.org/git/vlc.git
Voilà! The full VLC history should be on your hard disk in vlc/.

 $ git clone https://git.videolan.org/git/x264.git
Voilà! The full x264 history should be on your hard disk in x264/.

If you want only the last 3 VLC revisions:
 $ git clone https://git.videolan.org/git/vlc.git --depth 3

Clones without the full revision set (--depth) can't be used for backporting (or to make sure that you're including at least commits up to the common fork point).

You can also have the VLC stable branch, here:
 $ git clone https://git.videolan.org/git/vlc/vlc-2.2.git
Voilà! You got the stable branch repository.

See https://git.videolan.org/?p=vlc.git;a=summary

Or via http protocol from github (github can sometimes be a bit behind as a mirror):
https://github.com/videolan/vlc.git
See https://github.com/videolan/vlc

You can also clone using http via our repo.or.cz mirror.
 $ git clone http://repo.or.cz/r/vlc.git
See http://repo.or.cz/w/vlc.git (a mirror).

==== After cloning ====

 {{$}} git log
to see the full log of the trunk.
 $ gitk
to see the log graphically.

You can also browse the sources via [https://git.videolan.org/ gitweb].

=== Configure your global git config ===
May need to use 
 {{$}} git repo-config <various options> 
1.4.4.2 Requires the <kbd>repo-config</kbd> command rather than just <kbd>config</kbd>

==== Personal Information ====
Tell git your name. (use mostly by git-commit)
 {{$}} git config --global user.name "Your Name"
 $ git config --global user.email "me@example.com"

==== Mail Setup ====
To send patches you'll need a working git-send-email configuration. 
=====Built-in SMTP support (easiest)=====
''git-send-email'' has built in support for sending e-mail through [[wikipedia:SMTP|SMTP]]. You'll need a command line similar to the following one:

 git-send-email --annotate --smtp-server=smtp.example.com --smtp-server-port=587 --smtp-encryption=tls --smtp-user="yourname@example.com" <...>

=====MSMTP=====
You can use [https://marlam.de/msmtp/ msmtp] to achieve this. Install it with tls and ssl activated and place the following config file (.msmtprc) in your home directory
 # msmtp configuration file
 
 # Set default values for all following accounts.
 defaults
 tls on
 tls_starttls on
 tls_trust_file /certificates/EquifaxSecureCertificateAuthority.crt
 logfile /log/.msmtp.log
 
 # GMAIL
 account gmail
 host smtp.gmail.com
 port 587
 protocol smtp
 from user.name@gmail.com
 auth on
 user user.name@gmail.com
 
 # Set a default account
 account default : gmail
Then configure git to use msmtp. The password will be asked for upon sending mail.
 {{$}} git config --global sendemail.smtpserver /usr/local/bin/msmtp
The certificate for gmail can be found here: [https://www.geotrust.com/resources/extended-validation-ssl/certs/Equifax%20Secure%20Certificate%20Authority.crt EquifaxSecureCertificateAuthority.crt]

If you receive a '''<samp>cannot set X509 trust file</samp>''' error when using another CA certificate, make sure it is in the PEM (text format) rather than DER format (binary).

=====macOS=====

Setup info with e.g. gmail account
 {{$}} git config --global sendemail.smtpserver smtp.gmail.com
 $ git config --global sendemail.smtpuser your-gmail-address-here
 $ git config --global sendemail.smtpencryption tls
 $ git config --global sendemail.smtpserverport 587

If errors occur telling you something like perl's SMTP::SSL package is not there. Do the following
 $ sudo -H cpan Net::SMTP::SSL

==== Using git with color (Tip) ====
If you want to use git with colored output use:
 {{$}} git config --global color.ui true

If you are using an old git version (prior to 1.5.5) and previous command didn't work, use:
 $ git config --global color.diff auto
 $ git config --global color.status auto
 $ git config --global color.branch auto

==== Setting up "git up" (Tip) ====
If you want to be able to just keep in sync using "git up" use:
 {{$}} git config --global alias.up "pull --rebase"
And if you like your tree to be messy and don't want git to complain (like in svn) use:
 $ git config --global alias.up '!sh -c "git commit -a -m "Before rebase" && git pull --rebase && git reset head^"'

==== Setting up "git wu" (Git What's Up) (Tip) ====
If you want to see what you are about to "git push":
 {{$}} git config --global alias.wu "log --stat origin..@{0}"
Now use:
 $ git wu
Note that this only works for the master branch.

==== Setting up "git wup" (Git What's Up - with patch) (Tip) ====
If you want to see what you are about to "git push", along with the diff:
 {{$}} git config --global alias.wup "log -p origin..@{0}"
Now use:
 $ git wup

=== Set up Hooks (Tip) ===
If you are using Qt-creator and want to keep your files listing in sync,
just set up a post-checkout hook accordingly.
<syntaxhighlight lang="bash">
 #!/bin/sh
 # this file as .git/hooks/post-checkout
 if test -f vlc.files
 then
        echo "Updating Qt files list"
        git ls-files > vlc.files
 fi
</syntaxhighlight>

=== General GIT Workflow ===
# Make your file edits in your local repository.
# "git commit"      the changes in your local repository
# "git pull --rebase"  or "git up" (if you did ''git config --global alias.up "pull --rebase"'') to bring the rest of your local repository up to date
# "git log origin..master"    to check what you are going to commit
# "git push"    to move your changes up to the master
# "git stash"    if you want to "hide" your changes.  Do this if you think there may be other commits against the same things you are working on and want to refresh your local checkout (using a git pull --rebase) from the master. Use "git stash apply" to get your stash back. 
# "git checkout -f master"     if you think your tree is pretty hopeless, need a kill-and-fill to bring the master into your local repository.

=== List the local branch ===
You can now list your local branch by doing
 {{$}} git branch
which should output
 $ git branch
 * master

=== List your local non committed changes ===
 {{$}} git status | less

=== Commit ===
Now you can start to work on your tree. As soon as you feel you have reached a step in development where you can commit your work '''locally''', use
 {{$}} git commit -a
or
 $ git commit <specific files>

If you wish to give credit to someone else's work (e.g. you are applying a third party patch):
 $ git commit <specific files> --author "Name Surname <user@domain.com>"

=== List your commits ===
 {{$}} git log


=== Keeping your local working branch in sync ===
 {{$}} git pull --rebase

To shorten up that command type
 $ git config --global alias.up "pull --rebase"

Now you can just type:
 $ git up

=== Use a graphical interface ===
 {{$}} gitk          # Tree Browser
 $ qgit          # Tree Browser
 $ git-gui       # Commit/push/... editor

== Submitting patches ==

First make sure you have '''read''' our [[Sending Patches]] page. And that you've '''read''' the [[Sending Patches#Check_List| Check List]].

If you have been developing on vlc locally and (still) don't have write access, you can submit all your commits in one shot using:
 {{$}} rm -Rf patches
 $ git format-patch -o patches origin
 $ git send-email --to vlc-devel@videolan.org patches
If you want to create a cover letter for multiple patches use:
 $ git format-patch -o patches origin -n --cover-letter
 $ git send-email --annotate --cover-letter --to vlc-devel@videolan.org patches
If you have multiple patch consider using:
 $ git send-email --compose --no-chain-reply-to --to vlc-devel@videolan.org patches
This will produce the patches for each local commit in the directory "patches" and send them.
Use --no-chain-reply-to make sure it doesn't reply.

For x264, do the same with x264-devel@videolan.org

<!-- what does the following mean? -->
Don't do:
* [PATCH 0/m]
** [PATCH 1/m]
*** [PATCH 2/m]
**** ...
But do:
* [PATCH 0/m]
** [PATCH 1/m]
** [PATCH 2/m]
** ..

== Advanced usage ==
=== Creating a secondary local branch ===
If you want to work on a specific project that could require a branch of the trunk, create a local branch of the current branch by doing:
 {{$}} git branch mywork
and to actually use it do:
 $ git checkout mywork
Which could be summarized by:
 $ git checkout -b mywork

Then do some commit on it... And you can go back to your original master branch by doing:
 $ git checkout master

=== Fetching a remote branch ===
To see the remote branch use:
 {{$}} git branch -r
If the remote branch is named 0.8.6-bugfix
 $ git branch 0.8.6-bugfix origin/0.8.6-bugfix 
 Branch 0.8.6-bugfix set up to track remote branch refs/remotes/origin/0.8.6-bugfix.
 $ git branch
  0.8.6-bugfix
  * master
To checkout that branch use:
 $ git checkout 0.8.6-bugfix
To stay up-to-date a simple
 $ git pull --rebase
Should be enough.

If warnings appear that files still need updating:
 $ include/libvlc_internal.h: needs update
   include/mediacontrol_internal.h: needs update
   include/vlc/libvlc.h: needs update
   include/vlc_update.h: needs update
   modules/access/mms/mms.c: needs update
   ...

Then do a checkout -f to revert non committed local changes
 $ git checkout -f

To stay up-to-date another
 $ git pull --rebase
Should give no more warnings.

To push to the remote branch, use:
 $ git push origin 0.8.6-bugfix:0.8.6-bugfix

=== Creating a remote branch ===
If the new remote branch is named 0.9.0-bugfix, and is based on the local master branch.
First make sure everything go as planned with the --dry-run option:
 {{$}} git push --dry-run origin master:refs/heads/0.9.0-stable
 To git@git.videolan.org:vlc.git
 * [new branch]      master -> 0.9.0-stable

Then push it:
 $ git push origin master:refs/heads/0.9.0-stable
 To git@git.videolan.org:vlc.git
 * [new branch]      master -> 0.9.0-stable
 $ git branch -r
  origin/0.9.0-stable
  origin/master

To checkout that branch now see ''[[#Fetching a remote branch]]''

=== Backporting commits ===
It is possible to "backport" commit between the master branch and a -bugfix branch. However since VDD'09, the bugfix branches have been split to their own git repositories. This leaves us with 2 cases.

==== Normal simple case ====

Go to your -bugfix branch:
 {{$}} git checkout 1.0-bugfix

Backport the commit: 
 $ git cherry-pick -x -s <sha-id of commit>

If git fails to do the backport by itself, you'll be presented with the usual options in case of a failed merge or patching. Use "git status", your favorite editor or "git mergetool" to resolve the situation. Then use "git add" and "git commit -c <sha-id of backported commit>".
Then push your commit as usual.

==== Case of VLC bugfix branches ====
Due to the number of commits in vlc.git and the amount of divergence between the master and 1.0-bugfix branches, they have been separated into two different git repositories. But that doesn't block you from backporting.

Get the -bugfix git:
 {{$}} git clone https://git.videolan.org/git/vlc/vlc-1.0.git vlc-bugfix
Add vlc.git as an additional remote:
 $ git remote add vlc-master https://git.videolan.org/git/vlc.git
Update the information from vlc-master
 $ git fetch vlc-master
Backport as normal
 $ git cherry-pick -x -s <sha-id of commit>

=== Publishing your own fork ===
Go to [http://repo.or.cz/w/vlc.git http://repo.or.cz/w/vlc.git] and click [http://repo.or.cz/regproj.cgi?fork=vlc.git fork]. You will be able to publish your work there.

Please don't forget to send a mail to the ''vlc-devel'' mailing list as soon as you create your fork.

=== Revert your non-committed local changes ===
 {{$}} git checkout -f

===Edit or undo not yet pushed commits ===
This will undo the last commit
 {{$}} git reset HEAD^
which is the same as
 $ git reset master^
(if your checked-out copy of your tree is master)
And also the same as
 $ git reset a44a594 # note that there is no need to use the full sha id

If you have a stack of patch that you have not yet committed you can delete one patch from the list using git rebase --interactive
 $ git rebase --interactive origin
  pick eacf185 test
  pick 56322eb VLMA owner is vlma prod.
 
  # Rebase 826757e..56322eb onto 826757e
  #
  # Commands:
  #  pick = use commit
  #  edit = use commit, but stop for amending
  #  squash = use commit, but meld into previous commit

=== Diff-ing ===
* You can diff between two branches using
 {{$}} git diff branch1 branch2
* You can diff between the previous 10th commit and current using
 $ git diff HEAD~10 HEAD
* You can diff between the previous 10th commit and current of the branch "mywork" using
 $ git diff mywork~10 mywork
* Imagine that git log is like
 $ git log
 commit e0394f269305edd09843257e7c1d1a66aaf48ab3
 Author: jb <jb>
 Date:   Fri Apr 13 07:14:48 2007 +0000
    qt4 - Mousewheel (2)
 commit e80b339081aa6755f67c9bd8e2aacf93a9a79d95
 [..]
 commit ff7004b70fd239e4120deb160e2991bd5237b8df
 [..]
 commit a44a594898f981a145cfcace5f16f8973f9eb46f
 [..]
 commit 690df705c963cf6bf6f5746d54bc97a85ff91919
 [..]
 commit 679f8b1c3e0baa469efa970588b95a625c595d64
 [..]

 $ git diff a44a594898f981a145cfcace5f16f8973f9eb46f~2 e80b339081aa6755f67c9bd8e2aacf93a9a79d95
Will be equivalent to:
 $ git diff ff7004b70fd239e4120deb160e2991bd5237b8df e80b339081aa6755f67c9bd8e2aacf93a9a79d95
And to:
 $ git diff HEAD~4 HEAD^

* Remember that to produce a patch you should rather use git format-patch than git diff most of the time.

=== Patch-ing ===
* You can apply patches using
 {{$}} git apply <patch>

=== Tracking regression ===
git has a great tool called [https://www.kernel.org/pub/software/scm/git/docs/git-bisect.html git-bisect] to help you to track a faulty commit. Imagine you are tracking a bug that is known to appear after 0.8.6 (assuming 0.8.6 is tagged):
 {{$}} git bisect start
 $ git bisect bad # tell git current version has the bug you are tracking
 $ git bisect good 0.8.6 # tell git 0.8.6 didn't have the bug
And then git will checkout a certain revision, and ask you to test it. And you simply say whether this version has the bug.
If it has the bug:
 $ git bisect bad
if the bug is not present:
 $ git bisect good
And so on by bisection... At the end git will indicate the faulty commit. Most of the time this tool is really efficient to track regression.

If you can provide a script that test the presence of the bug 
 $ git bisect run <script_name>
will be able to track down the regression by itself. See [https://www.kernel.org/pub/software/scm/git/docs/git-bisect.html git-bisect Documentation].

== Using Git to push to VideoLAN git ==
=== Initial requirements ===
* You must have credentials to push commits into the repository. For other contributors, please read upper [[#Submitting_patches|Submitting patches to the vlc-devel or x264-devel]] paragraph.
* Make sure you've set your name and email in your commits
 {{$}} git config --global user.name "Your Name"
 $ git config --global user.email "me@example.com"

=== Convert your tree to use your ssh push commit access ===
 {{$}} vi vlc/.git/config
And replace
 https://git.videolan.org/git/vlc.git
With
 git@git.videolan.org:vlc.git

=== Staying up to date ===
 {{$}} git pull --rebase

If you don't want to have to type --rebase every time you pull do:
 $ git config branch.master.rebase true

This one creates a merge object which is not how SVN worked, so let's use the first version...
 $ git pull

=== Pushing your work ===
 {{$}} git log origin..master     # Check what you are going to push
 $ git push


<!-- GSoC 2007
== Using Git to publish your work (for SoC student?) ==
First get the official VLC '''Soc''' trunk
 {{$}} git clone https://git.videolan.org/git/vlc-soc.git
 $ cd vlc-soc
Ask for write access to a branch (called your_name_branch). Now we will make git know that you want to publish on this branch
 $ git config remote.my_soc_public_branch.url ssh://your_name@altair.videolan.org/home/videolan/gitroot/vlc-soc.git
Now tell git that you want to automatically push the local master branch to the public your_name_branch:
 $ git config remote.my_soc_public_branch.push +master:your_name_branch # the "+" will tell git to force update ignoring conflicts

Do some work and commit it to your master branch.
 $ git commit -a
You can also sync with the trunk (origin) as needed
 $ git pull --rebase origin
And don't forget to publish your changes:
 $ git push my_soc_public_branch
Now you should be able to see your latest changes in your branch via [https://git.videolan.org/ gitweb].
-->

= Documentation about git =
* [https://git-scm.com/ Official Git Website]
* [https://www.kernel.org/pub/software/scm/git/docs/tutorial.html Git Tutorial]
* [http://git.or.cz/course/svn.html Switching from SVN to git using cogito]
* [https://sourcemage.org/Git%20guide Very good Git guide]

[[Category:Coding]]