View source for Documentation:Streaming HowTo/Advanced streaming with samples, multiple files streaming, using multicast in streaming

{{RightMenu|Documentation TOC}}

Authors:
* wwwital

'''This document explains how to stream a file, stream multiple files, use multicast, etc., using the VideoLAN solution. With examples.'''

== UDP streaming examples ==

#Standard UDP streaming

 {{%}} '''vlc -vvv file:////home/vlc/2007.avi --sout #std{access=udp,mux=ts,dst=:1234}' '''

Nothing impossible yet. Streaming a file 2007.avi from /home/vlc/ to udp port 1234.


== Multicast RTP streaming examples ==
 {{%}} '''vlc -vvv file:////home/vlc/Jumper.avi --sout '#rtp{access=udp,mux=ts,dst=224.255.1.1,port=1234,sap,group="Video",name=Jumper Movie"}' :sout-all'''

Hard? No!
This is known key '''file'''. The key '''--sout''' starts output as in the UDP sample. Then we set '''#rtp''' with access type '''udp''', muxer '''ts'''. Then point to multicast IP address '''224.255.1.1''' with port '''1234'''. And some keys. We point VLC to do announcements of this stream using '''SAP''' (see [[SAP|service advertisements protocol]]), set description of the streaming group to '''Video''', and name this stream ''' 'Jumper Movie' '''.


== Multicast RTP streaming with multiple source files (with examples) ==

''When you start this, you can't stop.'' 
I spent several hours trying to find this solution.
See it:

 {{%}} '''vlc -vvv --color -I telnet --telnet-password "i_dont_know_this_password" --vlm-conf=/home/vlc/vlc.streaming.conf'''

We told that VLC must colorize its output using key '''--color'''. Then we told VLC to open the telnet server. We must control it, really?! This is the '''-I telnet''' key. And we the set the password '''"i_dont_know_this_password"''' to get access to the console. We use the standard VLC telnet port 4212. If you need to change it, use '''--telnet-port xxx'''.
Use '''--vlm-conf=/home/vlc/vlc.streaming.conf''' to point VLC to open - at start - a special file with multiple files description.

== Special multiple files description configuration file ==

*'''vlc.streaming.conf'''

Using this config file we try to cast 2 video files: '''2007.avi''' and '''Jumper.avi'''. To do this, we must describe 2 channels: ''channel1'' and ''channel2'', set the input, and set the output format (we try to multicast this): 

   new channel1 broadcast enabled 
   setup channel1 input file:////home/vlc/2007.avi loop
   setup channel1 output #rtp{access=udp,mux=ts,dst=224.255.1.1,port=1234,sdp=sap,sap,group="Video",name="2007 Movie"}

   new channel2 broadcast enabled 
   setup channel2 input file:////home/vlc/Jumper.avi loop
   setup channel2 output #rtp{access=udp,mux=ts,dst=224.255.1.2,port=1234,sdp=sap,sap,group="Video",name="Jumper Movie"}

   control channel1 play
   control channel2 play

<!-- TODO :
 * Finish this description
 * Point to build VLC with VLM control
 * Describe howto open this with VLC players
-->