VLC HowTo/Use with lirc

From VideoLAN Wiki
Revision as of 07:47, 7 November 2016 by DoesItReallyMatter (talk | contribs) (DoesItReallyMatter moved page How to Use Lirc to VLC HowTo/Use lirc: Renaming how-to articles per Talk:VLC HowTo (permalink))
Jump to navigation Jump to search
This page describes how to to use VLC media player with an infra red remote control on Linux. Other "how to" pages
Note: This article is about advanced lirc usage with VLC. For basic stuff please see ADD A LINK TO DOCUMENTATION HERE.

The aim is to have your remote behave the same way as for a television remote: program +/-, volume +/-, jump to position 3 when button 3 is pressed,...

Build-in lirc commands are only for basic control in the movie-playing mode, but I need to use other commands from rc interface - mainly "goto x" function. So the goal was to be able to use goto function with lirc.

VLC

Use a VLC version with lirc enabled.

Start-Up Script

#start/stop script for lircd+vlc for Kubuntu 6.10
start() {
   echo "Starting lirc support..."
   sudo setserial /dev/ttyS0 uart none       #serial port down
   sudo /sbin/modprobe lirc_serial           #load module
   sudo /sbin/modprobe lirc_dev           #load module
   sudo /usr/local/sbin/lircd --driver=default --device=/dev/lirc0 --output=/dev/lircd --pidfile=/var/run/lircd.pid --listen  #run lirc daemon
   sudo chmod 666 /dev/lircd                 #access
   sudo irexec -d   #daemon to pass ir commands
}

stop() {
   echo "Stoping lirc support..."
   sudo /usr/bin/killall -w lircd                #kill lirc daemon
   sudo /sbin/rmmod lirc_serial              #unload module
   sudo /sbin/rmmod lirc_dev                 #unload module
   sudo setserial /dev/ttyS0 uart 16550A     #serial port up
}

restart() {
   stop
   sleep 2
   start
}

case "$1" in
'start')
  start
  ;;
'stop')
   stop
   ;;
'restart')
  restart
   ;;
*)
echo "usage $0 start|stop|restart"
esac
exit 0

Scripts

It is neccesary to run vlc with rc interface to use all the supported commands (see vlc help). I use this script to run VLC with rc intf. Lircd is loaded and later unloaded. I have a desktop shortcut icon and I had to change properties of the shortcut to run in terminal. The other option is vlc --fake-tty option, but this uses 100 % CPU :-(

#/bin/bash
/home/ondra/.vlc/ovladac.sh start
vlc -I rc --rc-host localhost:12345 /home/ondra/playlist.m3u   
/home/ondra/.vlc/ovladac.sh stop

I use irexec to pass commands to VLC rc intf. Commands can be passed with netcat: echo "vlc_rc_command" | netcat localhost 12345 -q 1 (q means quit after 1 s). Commands are written in scripts, which are executed with irexec:

Here is a script, which is executed when remote button 1 is pressed. The others are similar.

cat play1.sh
#!/bin/bash
echo "goto 0" | netcat localhost 12345 -q 1

.lircrc

The last part of the .lircrc file.

There are defined actions for all requested buttons. irexec executes concerned shell script.

# remote numbers
begin
        prog = irexec
        button = 1
        config = /home/ondra/.vlc/play1.sh  &\n
end

begin
        prog = irexec
        button = 2
        config = /home/ondra/.vlc/play2.sh  &\n
end

begin
        prog = irexec
        button = 3
        config = /home/ondra/.vlc/play3.sh  &\n
end

begin
        prog = irexec
        button = 4
        config = /home/ondra/.vlc/play4.sh  &\n
end

begin
        prog = irexec
        button = 5
        config = /home/ondra/.vlc/play5.sh  &\n
end

begin
        prog = irexec
        button = 6
        config = /home/ondra/.vlc/play6.sh  &\n
end

begin
        prog = irexec
        button = 7
        config = /home/ondra/.vlc/play7.sh  &\n
end

begin
        prog = irexec
        button = 8
        config = /home/ondra/.vlc/play8.sh  &\n
end

begin
        prog = irexec
        button = 9
        config = /home/ondra/.vlc/play9.sh  &\n
end

begin
        prog = irexec
        button = 0
        config = /home/ondra/.vlc/play0.sh  &\n
end
begin
        prog = irexec
        button = Menu
        config = /home/ondra/.vlc/pause.sh  &\n
end

This is the complet list of supported keys in VLC 0.8.6:

Fullscreen -> key-toggle-fullscreen
Play/Pause -> key-play-pause
Pause only -> key-pause
Play only -> key-play
Faster -> key-faster
Slower -> key-slower
Next -> key-next
Previous -> key-prev
Stop -> key-stop
Position -> key-position
Very short backwards jump -> key-jump-extrashort
Very short forward jump -> key-jump+extrashort
Short backwards jump -> key-jump-short
Short forward jump -> key-jump+short
Medium backwards jump -> key-jump-medium
Medium forward jump -> key-jump+medium
Long backwards jump -> key-jump-long
Long forward jump -> key-jump+long
Activate -> key-nav-activate
Navigate up -> key-nav-up
Navigate down -> key-nav-down
Navigate left -> key-nav-left
Navigate right -> key-nav-right
Go to the DVD menu -> key-disc-menu
Select previous DVD title -> key-title-prev
Select next DVD title -> key-title-next
Select prev DVD chapter -> key-chapter-prev
Select next DVD chapter -> key-chapter-next
Quit -> key-quit
Volume up -> key-vol-up
Volume down -> key-vol-down
Mute -> key-vol-mute
Subtitle delay up -> key-subdelay-up
Subtitle delay down -> key-subdelay-down
Audio delay up -> key-audiodelay-up
Audio delay down -> key-audiodelay-down
Cycle audio track -> key-audio-track
Cycle subtitle track -> key-subtitle-track
Cycle source aspect ratio -> key-aspect-ratio
Cycle video crop -> key-crop
Cycle deinterlace modes -> key-deinterlace
Show interface -> key-intf-show
Hide interface -> key-intf-hide
Take video snapshot -> key-snapshot
Go back in browsing history -> key-history-back
Go forward in browsing history -> key-history-forward
Record -> key-record
Dump -> key-dump
Crop one pixel from the top of the video -> key-crop-top
Uncrop one pixel from the top of the video -> key-uncrop-top
Crop one pixel from the left of the video -> key-crop-left
Uncrop one pixel from the left of the video -> key-uncrop-left
Crop one pixel from the bottom of the video -> key-crop-bottom
Uncrop one pixel from the bottom of the video -> key-uncrop-bottom
Crop one pixel from the right of the video -> key-crop-right
Uncrop one pixel from the right of the video -> key-uncrop-right
Set playlist bookmark 1 -> key-set-bookmark1
Set playlist bookmark 2 -> key-set-bookmark2
Set playlist bookmark 3 -> key-set-bookmark3
Set playlist bookmark 4 -> key-set-bookmark4
Set playlist bookmark 5 -> key-set-bookmark5
Set playlist bookmark 6 -> key-set-bookmark6
Set playlist bookmark 7 -> key-set-bookmark7
Set playlist bookmark 8 -> key-set-bookmark8
Set playlist bookmark 9 -> key-set-bookmark9
Set playlist bookmark 10 -> key-set-bookmark10
Play playlist bookmark 1 -> key-play-bookmark1
Play playlist bookmark 2 -> key-play-bookmark2
Play playlist bookmark 3 -> key-play-bookmark3
Play playlist bookmark 4 -> key-play-bookmark4
Play playlist bookmark 5 -> key-play-bookmark5
Play playlist bookmark 6 -> key-play-bookmark6
Play playlist bookmark 7 -> key-play-bookmark7
Play playlist bookmark 8 -> key-play-bookmark8
Play playlist bookmark 9 -> key-play-bookmark9
Play playlist bookmark 10 -> key-play-bookmark10 

Can be extracted using this command:

vlc -H --advanced 2>&1 |sed -n '/--key/ {s/^\ *--//; s/^\(.*\) <[^>]*>\ *\(.*\)$/\2 -> \1/; h}; /^.*[^ ].*-> key/ p; /^ -> key/ { n; s/^[ \t\n]*//M; G; s/\n//; p}'

Version

This has been written by [User:J-b] using Ondřej Kuda's HowTo.

See also

Original post on VideoLAN forum

Gentoo Wiki's HowTo

Enhanced VLC lirc remote control