Transcode
Transcoding is the process of taking a video file and changing it to a different format or bitrate.
Transcoding in VLC copies the movie to a new file in a different format, so you end up with both the original and new files. This means you need to have enough space on your hard drive to store this extra file. You should also have a reasonably fast computer, as transcoding can be very slow.
In VLC, transcoding is exactly the same as streaming accross a network, except that the output is sent to a file instead of a network.
Contents
Transcoding with the Wizard
VLC includes a transcoding and streaming wizard. To transcode a file, just select the transcode option. You will then be asked what format to convert to: you can give a video codec, and audio codec and an container format. Only some container formats can support some codecs - look here to see what supportes what.
For more information, see VideoLAN's Official Documentation
Transcoding with the Command Prompt
The most flexible way to transcode with vlc is using a command prompt to start vlc. Transcoding works the same as streaming. For example, the following command changes an asf file to an MPEG-2 file:
- vlc "C:\Movies\Your File.asf" :sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace,audio-sync}:std{access=file, mux=ps,url="C:\Movies\Your File Output.ps.mpg"}'
The access=file instructs vlc to store the output in a file (and not stream it), and the url is the location of the new (output) file.
(Note: If you are running VLC on Mac OS X, you should use clivlc instead of VLC to avoid possible Bus error problems.)
Transcoding takes quite a while, so it's advisable to use an option like --stop-time=30 to only encode the first 30 seconds - this means you can check the file has transcoded correctly, and that the output is of a suitable quality. (Note: On Mac OS X this trick doesn't seem to work. Just press ctrl-c after a while, VLC will properly write out the already transcoded segment)
The transcode statement can contain vcodec and vb to change the video codec and acodec and ab to change the audio codec. If vcodec is missing, the video codec will stay the same (same for acodec).
Common additional options to use are audio-sync (to make sure the audio is in sync correctly) and deinterlace (to increase quality slightly on interlaced video).
Under MS Windows
the syntax on windows is slightly different:
C:\Program Files\VideoLAN\VLC>vlc -vvv "D:\688497.flv" --sout=#transcode{vcodec= mp4v,acodec=mpga,vb=800,ab=128,deinterlace}:standard{access=file,mux=ts,url="D:\ asd.mpg"}
Completely non-interactive transcoding
For completely non-interactive transcoding (such as the case necessary when running under Mac OS X), the above example could be rewritten as
- vlc -I dummy "C:\Movies\Your File.asf" :sout='#transcode{vcodec=mp2v,vb=4096,acodec=mp2a,ab=192,scale=1,channels=2,deinterlace,audio-sync}:std{access=file, mux=ps,url="C:\Movies\Your File Output.ps.mpg"}' vlc:quit
The two extra options are
- -I dummy
- Disables the graphical interface
- vlc:quit
- Quit VLC after transcoding
If transcoding from a DVD, it is also necessary to use the dvdsimple:// notation instead of the dvd:// notation, in order to avoid interacting with the DVD menu system (which is quite impossible without the graphical interface).
For more information, see VideoLAN's Official Documentation
Non-Interactive Batch Transcoding (Windows)
To transcode several files without user interaction create a batch file in the folder where the files are contained and this line to the batch file:
for %%a in (*.FILE_EXT) do "PATH_TO_VLC" -I dummy -vvv %%a --sout=#transcode{vcodec=VIDEO_CODEC,vb=VIDEO_BITRATE,scale=1,acodec=AUDIO_CODEC,ab=AUDIO_BITRATE,channels=6}:standard{access=file,mux=MUXER,dst=%%a.OUTPUT_EXT} vlc:quit
An alternative method is to use VB Script. This example will transcode all files from one folder to another. It will also wait for each file to finish transcoding before starting the next. Create the script transcode.vbs, in the VLC installation folder, default "C:\Program Files\VideoLAN\VLC". Change the strSource and strTarget in the example to match your requirements. Start a "DOS Box", Start - Run - cmd then change to the VLC folder and run the script "cscript transcode.vbs".
This example was tested on Microsoft Windows Script host 5.6 running on XP Pro SP2
'
' author: DaveF
' date: 2008/01/02
' purpose: convert all avi & mp4 file to MPEG TS format
'
' based on code from:http://episteme.arstechnica.com/eve/forums/a/tpc/f/12009443/m/516001349831
'
Dim objFSO, objShell, strSource, strTarget, strOldName, strNewName
'
set objFSO = CreateObject("Scripting.FileSystemObject")
'
' Set up starting folders
'
strSource = "O:\"
strTarget = "N:\"
'
call RecurseDir(strSource, strTarget)
'
' // Recursively copy all files and folders
'
Sub RecurseDir(strSource, strTarget)
wscript.echo "source: " & strSource & " target: "& strTarget
'
Dim strTempSource, strTempTarget
'
Set strTempSource = objFSO.GetFolder(strSource)
'
Wscript.Echo "Begin Value: " & strTarget
'
If Not objFSO.FolderExists(strTarget) Then
' Wscript.Echo "No Folder! Creating folder [" & strTarget & "]"
objFSO.CreateFolder(strTarget)
Else
Wscript.Echo "Folder exists! " & strTempTarget
End If
'
Set strTempTarget = objFSO.GetFolder(strTarget)
' ** Copy files from current directory to target
For each file in strTempSource.files
strOldName = strSource & "\" & file.name
strNewName = strTempTarget & "\" & Mid(file.name, 1, InstrRev(file.name, ".")) & "ts"
'
If Not objFSO.FileExists(strNewName) Then
Set objShell = CreateObject("WScript.Shell")
'
Wscript.Echo "Transcoding file: " & strOldName & " to " & strNewName
wscript.echo "vlc file://""" & strOldName & """ :sout=#duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc:quit"
objShell.Run "vlc file://""" & strOldName & """ :sout=#duplicate{dst=std{access=file,mux=ts,dst=""" & strNewName & """}} vlc:quit" , 1, True
Set objShell = Nothing
End If
Next
' ** For each subfolder of current dir, copy files to target and recurse its subdirs
For each subdir in strTempSource.subfolders
Wscript.Echo subdir.path
call RecurseDir(subdir.path, strTempTarget & "\" & subdir.name)
Next
End Sub
Non-Interactive Batch Transcoding (Linux)
To transcode several files without user interaction create a bash script in the folder where the files are contained and add these lines to the bash script:
#!/bin/bash
vcodec="VIDEO_CODEC"
acodec="AUDIO_CODEC"
bitrate="VIDEO_BITRATE"
arate="AUDIO_BITRATE"
ext="OUTPUT_EXT"
mux="MUXER"
vlc="PATH_TO_VLC"
fmt="INPUT_EXT"
for a in *$fmt; do
$vlc -I dummy -vvv "$a" --sout "#transcode{vcodec=$vcodec,vb=$bitrate,acodec=$acodec,ab=$arate,channels=6}:standard{mux=$mux,dst=\"$a.$ext\",access=file}"vlc:quit
done
Non-Interactive Merge/Transcode (Windows)
If you have more than one source files that need to be merged and transcoded resulting in a single out put file create a batch script with the following line in it:
"PATH_TO_VLC" -vvv FILE1.EXT FILE2.EXT FILE3.EXT ETC.ETC --sout-keep --sout=#gather{} --sout=#transcode{vcodec=h264,vb=1024,scale=1,acodec=mp4a,ab=192,channels=6}:standard{access=file,mux=ts,dst=out.mpg} --sout-all
Example script
As an example, here is a bash script that will take a .mpg file as generated by an DVB capture device and transcode it into an MPEG4 file using the h.264 codec. Copy it to a file, for example dvb2mp4, and make it executable. It should work on any operating system that has bash, including windows if Cygwin is installed. It uses the cropping parameters proposed at Wikipedia:Overscan_amounts adapted so that the dimensions are divisible by 16 for better encoding.
#!/bin/bash
#
# Transcode DVB TV signals to h.264-encoded MP4 files using VLC
# Wout.Mertens@gmail.com
#### Defaults, please edit for your settings ####
# VLC location, here is the Mac OS X example
VLC=/Applications/VLC.app/Contents/MacOS/clivlc
# Other possibilities: (Remove the # to activate)
#VLC=/usr/bin/vlc
#VLC=/usr/local/bin/vlc
# 16:9 or 4:3
aspect=16:9
# PAL (Europe) or NTSC (US)
src=PAL
# video bitrate
bitrate=1024
# audio bitrate
arate=128
# cropping?
crop=yes
# Deinterlace?
deint=yes
#### Program, do not change below this line ####
usage() {
cat 1>&2 <<EOF
Usage: $0 [-swpncC] [-b <rate>] [-a <rate>] <DVB source .mpg> <MP4 output file>
-s 4:3 aspect ratio (default=$aspect)
-w 16:9 aspect ratio
-p PAL (720x576) input (default=$src)
-n NTSC (720x480) input
-c Crop borders (default=$crop)
-C Do not crop borders
-d Perform de-interlacing (default=$deint)
-D Do not perform de-interlacing
-b video bitrate kb/s (default=$bitrate)
-a audio bitrate kb/s (default=$arate)
EOF
exit 1
}
error() {
echo "ERROR: $*" 1>&2
exit 2
}
while getopts 'swpncCb:a:h' opt; do
case $opt in
s) aspect=4:3 ;;
w) aspect=16:9 ;;
p) src=PAL ;;
n) src=NTSC ;;
c) crop=yes ;;
C) crop=no ;;
d) deint=yes ;;
D) deint=no ;;
b) bitrate=$OPTARG ;;
a) arate=$OPTARG ;;
h) usage ;;
*) echo "Unknown option $opt" 1>&2; usage ;;
esac
done
shift $(( $OPTIND - 1 ))
[ $# -ne 2 ] && usage
infile="$1"
outfile="$2"
case $outfile in
*.mp4|*.MP4) : ;;
*) outfile="$outfile.mp4" ;;
esac
[ -r "$infile" ] || error "Can't read from $infile"
case "$src,$aspect,$crop" in
PAL,16:9,yes) sizestr="cropleft=31,cropright=31,croptop=16,cropbottom=16,width=960,height=544" ;;
PAL,4:3,yes) sizestr="cropleft=31,cropright=31,croptop=16,cropbottom=16,width=720,height=544" ;;
NTSC,16:9,yes) sizestr="cropleft=30,cropright=30,croptop=17,cropbottom=17,width=800,height=448" ;;
NTSC,4:3,yes) sizestr="cropleft=26,cropright=26,croptop=17,cropbottom=17,width=608,height=448" ;;
PAL,16:9,no) sizestr="width=1024,height=576" ;;
PAL,4:3,no) sizestr="width=768,height=576" ;;
NTSC,16:9,no) sizestr="width=800,height=448" ;;
NTSC,4:3,no) sizestr="width=608,height=448" ;;
*) error "Could not handle $src,$aspect,$crop. This shouldn't happen!" ;;
esac
if [ "$deint" = "yes" ]; then
deintstr=",deinterlace=enable"
else
deintstr=
fi
# Let's do it
echo "Input file: $infile"
echo "Output file: $outfile"
echo "Encoding at $bitrate+$arate kb/s, input $src, $aspect, cropping $crop, de-interlace $deint"
echo
echo '>>>' $VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate,acodec=mp4a,ab=$arate}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc:quit
echo
$VLC -I dummy "$infile" --sout "#transcode{$sizestr$deintstr,vcodec=h264,vb=$bitrate,acodec=mp4a,ab=$arate}:standard{mux=mp4,dst=\"$outfile\",access=file}" vlc:quit
