Difference between revisions of "Win32CompileMSYS"
m (+Category:Windows) |
|||
(79 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
= Introduction = | = Introduction = | ||
− | + | [http://sourceforge.net/projects/msys2/ MSys2] is a helper environment for MinGW, the compiler chain for Windows based on GCC. | |
− | |||
− | It can build VLC natively on Windows. | + | It can build VLC natively on Microsoft Windows. However, VideoLAN developers '''strongly recommend''' [[Win32Compile|cross-compiling VLC from Linux]], which is faster and easier. If you decide to stick to the MSYS method, you are on your own. Should you encounter any problem and ask for help, expect to be told to cross-compile. |
− | VLC is a complex program with many dependencies, | + | Either way, VLC is a complex program with many dependencies, most of which are obtained/built through the command line interface. Therefore, experience with the POSIX command line (i.e. the ''Unix shell'') is '''required'''. |
+ | Time, patience and persistence are indispensable. The entire process outlined below should take at the very least 4 hours. Experience show that mistakes are common, especially with beginners, so you might need to make multiple attempts. | ||
− | = Windows tools | + | = Install Windows tools = |
== Text editor == | == Text editor == | ||
− | To edit unix-style text documents you need a suitable editor | + | To edit unix-style text documents you need a suitable editor: Notepad is not enough. |
* Use [http://sourceforge.net/projects/notepad2/ notepad2]. You can set File - Line endings - Default to "Unix (LF)", but it always saves opened files in the ending style they have. | * Use [http://sourceforge.net/projects/notepad2/ notepad2]. You can set File - Line endings - Default to "Unix (LF)", but it always saves opened files in the ending style they have. | ||
Line 20: | Line 20: | ||
A recent version of [http://www.7-zip.org/ 7-zip] is therefore strongly advised. | A recent version of [http://www.7-zip.org/ 7-zip] is therefore strongly advised. | ||
− | = | + | = Install MSys2 and GCC = |
− | + | Install MSys2 from http://msys2.github.io/ | |
− | + | We recommend to use the 32bits version. | |
− | + | Let the default, and run the command line. | |
− | |||
− | + | == Tools == | |
+ | Install the autotools suite: | ||
+ | pacman -S git subversion cvs automake autoconf libtool m4 make gettext pkg-config mingw-w64-i686-lua findutils mingw-w64-i686-headers yasm patch | ||
− | + | === gcc === | |
− | + | Download gcc from: | |
− | + | [http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win32/Personal%20Builds/mingw-builds/4.9.2/threads-win32/sjlj/i686-4.9.2-release-win32-sjlj-rt_v3-rev0.7z/download mingw-w64]. | |
− | |||
− | |||
− | + | Unzip it to C:\MSys2\ | |
− | |||
− | + | === Restart === | |
+ | '''Exit MSys2, run ''autorebase.bat'' and re-run MSys2 from ''mingw32_shell.bat''''' | ||
− | + | == Check GCC == | |
+ | Run | ||
+ | gcc -v | ||
− | = VLC sources = | + | And check that it says |
− | + | Thread model: win32 | |
+ | gcc version 4.9.2 (i686-win32-sjlj-rev0, Built by MinGW-W64 project) | ||
+ | |||
+ | = Get VLC sources = | ||
== Git == | == Git == | ||
+ | <big>'''YOU MUST''' keep the native line-endings of the repo.</big> | ||
+ | git config core.autocrlf=false | ||
+ | |||
Clone the git repo | Clone the git repo | ||
git clone git://git.videolan.org/vlc.git | git clone git://git.videolan.org/vlc.git | ||
− | + | '''Nota Bene:''' ensure your Windows user name does not contain spaces so that the cloning folder of VLC will not not have spaces in it. | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | = Get precompiled 3rd party libraries = | |
− | |||
− | = Get | ||
cd vlc/contrib | cd vlc/contrib | ||
mkdir win32 && cd win32 | mkdir win32 && cd win32 | ||
− | ../bootstrap --build= | + | ../bootstrap --build=i686-w64-mingw32 |
make prebuilt | make prebuilt | ||
− | '''Note''' | + | '''Note:''' check that all is well with moc -v |
− | |||
− | |||
− | |||
− | |||
= Build VLC = | = Build VLC = | ||
== Bootstrap == | == Bootstrap == | ||
+ | In VLC root folder, do: | ||
./bootstrap | ./bootstrap | ||
Line 80: | Line 76: | ||
mkdir win32 | mkdir win32 | ||
cd win32 | cd win32 | ||
− | sh ../extras/package/win32/configure.sh --host= | + | sh ../extras/package/win32/configure.sh --host=i686-w64-mingw32 --disable-nls |
'''Note:''' If you want any custom options, like "--disable-lua" or anything of that nature, you can append them. | '''Note:''' If you want any custom options, like "--disable-lua" or anything of that nature, you can append them. | ||
== Make (compile) == | == Make (compile) == | ||
− | + | make -j4 | |
− | |||
'''Note:''' If your <username> starts with the "u" or "x" character, change C:\MSys\1.0\home\<username>\config.h and double all backslashes in VLC_COMPILED_BY constant. | '''Note:''' If your <username> starts with the "u" or "x" character, change C:\MSys\1.0\home\<username>\config.h and double all backslashes in VLC_COMPILED_BY constant. | ||
− | + | = Create packages = | |
− | + | == Run VLC == | |
Once the compilation is done, build self-contained VLC packages with one of the following "make" commands: | Once the compilation is done, build self-contained VLC packages with one of the following "make" commands: | ||
make package-win-common | make package-win-common | ||
− | + | This will create a subdirectory named vlc-x.x.x with all the binaries with debugging symbols. You can run ./vlc.exe from there. | |
+ | == Create proper packages == | ||
make package-win32-zip | make package-win32-zip | ||
(Same as above but will package the directory in a zip file). | (Same as above but will package the directory in a zip file). | ||
− | make package-win32 | + | make package-win32-exe |
(Same as above but will also create an auto-installer package. You will need to have NSIS installed in its default location for this to work). | (Same as above but will also create an auto-installer package. You will need to have NSIS installed in its default location for this to work). | ||
− | |||
− | |||
− | |||
− | |||
= Troubleshooting = | = Troubleshooting = | ||
Line 122: | Line 114: | ||
It was updated in July 2012 by gnosygnu. Note that there are several new notes in [[Win32CompileMSYSTroubleShooting]]. These reflect problems that were encountered on gnosygnu's setup (Windows XP SP3). Refer to this [http://forum.videolan.org/viewtopic.php?f=32&t=102843&sid=f58967215a83981dda030ff6efa3d493 forum thread] for more information. | It was updated in July 2012 by gnosygnu. Note that there are several new notes in [[Win32CompileMSYSTroubleShooting]]. These reflect problems that were encountered on gnosygnu's setup (Windows XP SP3). Refer to this [http://forum.videolan.org/viewtopic.php?f=32&t=102843&sid=f58967215a83981dda030ff6efa3d493 forum thread] for more information. | ||
− | This howto was re-re-created by [[User:J-b|Jean-Baptiste Kempf]] in September 2012 | + | This howto was re-re-created by [[User:J-b|Jean-Baptiste Kempf]] in September 2012 and updated until 2015, with MSys2 |
= See also = | = See also = | ||
*[[Win32CompileMSYSOld]] - deprecated documentation | *[[Win32CompileMSYSOld]] - deprecated documentation | ||
+ | |||
+ | [[Category:Building]] | ||
+ | [[Category:Windows]] |
Latest revision as of 20:23, 15 February 2019
Contents
Introduction
MSys2 is a helper environment for MinGW, the compiler chain for Windows based on GCC.
It can build VLC natively on Microsoft Windows. However, VideoLAN developers strongly recommend cross-compiling VLC from Linux, which is faster and easier. If you decide to stick to the MSYS method, you are on your own. Should you encounter any problem and ask for help, expect to be told to cross-compile.
Either way, VLC is a complex program with many dependencies, most of which are obtained/built through the command line interface. Therefore, experience with the POSIX command line (i.e. the Unix shell) is required. Time, patience and persistence are indispensable. The entire process outlined below should take at the very least 4 hours. Experience show that mistakes are common, especially with beginners, so you might need to make multiple attempts.
Install Windows tools
Text editor
To edit unix-style text documents you need a suitable editor: Notepad is not enough.
- Use notepad2. You can set File - Line endings - Default to "Unix (LF)", but it always saves opened files in the ending style they have.
- Or use notepad++.
Unzip Utility (7-zip)
Files to downloaded will have to be uncompressed. Some of them use Unix originated formats (.tar.gz, .tar.bz2, .tar.lzma), you will then need a versatile unzipping utility.
A recent version of 7-zip is therefore strongly advised.
Install MSys2 and GCC
Install MSys2 from http://msys2.github.io/
We recommend to use the 32bits version.
Let the default, and run the command line.
Tools
Install the autotools suite:
pacman -S git subversion cvs automake autoconf libtool m4 make gettext pkg-config mingw-w64-i686-lua findutils mingw-w64-i686-headers yasm patch
gcc
Download gcc from: mingw-w64.
Unzip it to C:\MSys2\
Restart
Exit MSys2, run autorebase.bat and re-run MSys2 from mingw32_shell.bat
Check GCC
Run
gcc -v
And check that it says
Thread model: win32 gcc version 4.9.2 (i686-win32-sjlj-rev0, Built by MinGW-W64 project)
Get VLC sources
Git
YOU MUST keep the native line-endings of the repo.
git config core.autocrlf=false
Clone the git repo
git clone git://git.videolan.org/vlc.git
Nota Bene: ensure your Windows user name does not contain spaces so that the cloning folder of VLC will not not have spaces in it.
Get precompiled 3rd party libraries
cd vlc/contrib mkdir win32 && cd win32 ../bootstrap --build=i686-w64-mingw32 make prebuilt
Note: check that all is well with moc -v
Build VLC
Bootstrap
In VLC root folder, do:
./bootstrap
Configure
mkdir win32 cd win32 sh ../extras/package/win32/configure.sh --host=i686-w64-mingw32 --disable-nls
Note: If you want any custom options, like "--disable-lua" or anything of that nature, you can append them.
Make (compile)
make -j4
Note: If your <username> starts with the "u" or "x" character, change C:\MSys\1.0\home\<username>\config.h and double all backslashes in VLC_COMPILED_BY constant.
Create packages
Run VLC
Once the compilation is done, build self-contained VLC packages with one of the following "make" commands:
make package-win-common
This will create a subdirectory named vlc-x.x.x with all the binaries with debugging symbols. You can run ./vlc.exe from there.
Create proper packages
make package-win32-zip
(Same as above but will package the directory in a zip file).
make package-win32-exe
(Same as above but will also create an auto-installer package. You will need to have NSIS installed in its default location for this to work).
Troubleshooting
See Win32CompileMSYSTroubleShooting.
Acknowledgements
This howto was re-created by Jean-Baptiste Kempf and updated in June 2009, September 2009, December 2009 and March 2010.
It was updated in June 2010 by Vicne with the help of J-b, gnosygnu and MichaelMc
It was updated in July 2012 by gnosygnu. Note that there are several new notes in Win32CompileMSYSTroubleShooting. These reflect problems that were encountered on gnosygnu's setup (Windows XP SP3). Refer to this forum thread for more information.
This howto was re-re-created by Jean-Baptiste Kempf in September 2012 and updated until 2015, with MSys2
See also
- Win32CompileMSYSOld - deprecated documentation