VLC HowTo/Transcode multiple videos

This page describes how to batch transcode or encode.

This page contains example code.
This code is licensed under the GNU General public license

Idea

The idea is to use VLC to do some batch work to encode or transcode multiple files one after each other, without having to care about it.

You may want to transcode all your videotheque to another format to play them on an iPod, a Zune, a PS3 or an Xbox.

Codecs / Muxers

You have to choose the correct codecs for the device you want to transcode for.

We choose here H.264 with AAC in a MPEG-2/TS muxer as an example.

GUI

Batch convert is supported via the GUI in VLC 3.0.0

Otherwise, use command-line batch transcoding below.

Command Lines

Windows

For example, to transcode a batch of m4a files (potentially in multiple subdirectories of a single common root directory) to mp3 files (512kb/s encoding with 44100 sampling frequency) you could use the following code in a Windows XP command prompt:

for %%a in (*.VOB) do "C:\Program Files\VideoLAN\VLC\vlc" -I dummy -vvv %%a --sout=#transcode{vcodec=h264,vb=1024,acodec=mp4a,ab=192,channels=2,deinterlace}:standard{access=file,mux=ts,dst=%%a.mpg} vlc://quit

@ECHO OFF
REM ########################################################################
REM # A Windows XP cmd.com script to batch convert m4a files to mp3.       #
REM #                                                                      #
REM # Copyright (C) 2008 Andrew Boden                                      #
REM # (boden@graduate.uwa.edu.au)                                          #
REM #                                                                      #
REM # This program is free software: you can redistribute it and/or modify #
REM # it under the terms of the GNU General Public License as published by #
REM # the Free Software Foundation, either version 3 of the License, or    #
REM # (at your option) any later version.                                  # 
REM #                                                                      #
REM # This program is distributed in the hope that it will be useful,      #
REM # but WITHOUT ANY WARRANTY; without even the implied warranty of       #
REM # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the        #
REM # GNU General Public License for more details.                         #
REM #                                                                      #
REM # You should have received a copy of the GNU General Public License    #
REM # along with this program.  If not, see <http://www.gnu.org/licenses/>.#
REM #                                                                      #
REM # Version 1.0 (June 27th 2008)                                         #
REM # Uses VideoLAN VLC 0.8.6h (www.videolan.org)                          #
REM # Gracefully handles commas and apostrophes in file names.             #
REM # Not aware of any other characters needing graceful handling.         #
REM # 512kbps encoding with 44100 sampling.                                #
REM ########################################################################

FOR /R %%G IN (*.m4a) DO (CALL :SUB_VLC "%%G")
FOR /R %%G IN (*.m4a.mp*) DO (CALL :SUB_RENAME "%%G")
GOTO :eof

:SUB_VLC
 SET _firstbit=%1
 SET _qt="
 CALL SET _newnm=%%_firstbit:%_qt%=%%
 SET _commanm=%_newnm:,=_COMMA_%
 REM echo %_commanm%
 CALL "C:\Program Files\VideoLAN\VLC\vlc" -I dummy -vvv %1 --sout=#transcode{acodec="mpga",ab="512","channels=2",samplerate="44100"}:standard{access="file",mux="mpeg1",dst="%_commanm%.mp3"} vlc://quit
GOTO :eof

:SUB_RENAME
 SET _origfnm=%1
 SET _endbit=%_origfnm:*.m4a=%
 CALL SET _newfilenm=%%_origfnm:.m4a%_endbit%=.mp3%%
 SET _newfilenm=%_newfilenm:_COMMA_=,%
 COPY %1 %_newfilenm%
 DEL %1
GOTO :eof

:eof

The same as above, for vlc >= 0.9:

@ECHO OFF
FOR /R %%G IN (*.m4a) DO (CALL :SUB_VLC "%%G")
FOR /R %%G IN (*.m4a.mp*) DO (CALL :SUB_RENAME "%%G")
GOTO :eof

:SUB_VLC
 SET _firstbit=%1
 SET _qt="
 CALL SET _newnm=%%_firstbit:%_qt%=%%
 SET _commanm=%_newnm:,=_COMMA_%
 REM echo %_commanm%
 CALL "C:\Program Files\VideoLAN\VLC\vlc" -I dummy -vvv %1 --sout=#transcode{acodec="mpga",ab="512","channels=2"}:standard{access="file",mux="raw",dst="%_commanm%.mp3"} vlc://quit
GOTO :eof

:SUB_RENAME
 SET _origfnm=%1
 SET _endbit=%_origfnm:*.m4a=%
 CALL SET _newfilenm=%%_origfnm:.m4a%_endbit%=.mp3%%
 SET _newfilenm=%_newfilenm:_COMMA_=,%
 COPY %1 %_newfilenm%
 DEL %1
GOTO :eof

:eof

Windows 7 SendTo

This batch file allows to use the Windows SendTo context menu in Explorer.
Copy the content in a file named MOV_to_MPG_Converter.bat and copy it to your SendTo directory (CMD SHELL:sendto)

@ECHO OFF
rem ***********************************************************************
rem * MOV to MPG batch converter. (2014-09-29 Sinx)                       *
rem *                                                                     *
rem * For installation just copy batch file to SendTo directory.          *
rem * On Win8 execute "SHELL:sendto" to go to Sendto folder.              *
rem *                                                                     *
rem * I got quite good compression rations with these parameters:         *
rem * vcodec=h264      codec used                                         *
rem * vb=10000         video bandwidth                                    *
rem * deinterlace=1    rebuild full pictures from keyframes and diffs.    *
rem * acodec=mp3       audio codec                                        *
rem * ab=128           128kbps mp3 quality                                *
rem * channels=2       stereo                                             *
rem *                                                                     *
rem * for parameters see                                                  *
rem * http://www.videolan.org/doc/vlc-user-guide/de/ch04.html             *
rem ***********************************************************************
echo **********************************************************************
echo MOV to MPG VLC batch converter called: %0 %1 %2 %3 %4 %5 %6 %7 %8
echo **********************************************************************
echo.
echo For installation, just copy batch file to SendTo folder..
echo.

SET _new_extention=mpg

:start
if "%~1"=="" (call goto :the_end)
CALL :SUB_CONVERT %1
SHIFT
goto :start


:SUB_CONVERT
SET _orig_path=%~1
rem SET _orig_extention=%_orig_filename:*.=%
echo %_orig_path%
SET _orig_extention=%_orig_path:*.=%
CALL SET _new_path=%%_orig_path%:.%_orig_extention%=.%_new_extention%%%
set _new_path="%_new_path%"
echo.
echo Converting %1 ======TO===== %_new_path% ...
echo.

if exist "%ProgramFiles%\VideoLAN\VLC\vlc.exe" (
SET _vlc_path="%ProgramFiles%\VideoLAN\VLC\vlc"
) else (
SET _vlc_path="%ProgramFiles(x86)%\VideoLAN\VLC\vlc"
)

CALL %_vlc_path% -I dummy -vvv %1 --sout=#transcode{vcodec=h264,vb=10000,deinterlace=1,acodec=mp3,ab=128,channels=2,samplerate=44100}:standard{access=file,mux=ts,dst=%_new_path%} vlc://quit
GOTO :eof

:the_end
echo **********************************************************************
echo * FINISHED                                                           *
echo **********************************************************************
pause

Powershell

    
$outputExtension = ".mp3"
$bitrate = 160
$channels = 2

foreach($inputFile in get-childitem -recurse -Filter *.wav)
{ 
  $outputFileName = [System.IO.Path]::GetFileNameWithoutExtension($inputFile.FullName) + $outputExtension;
  $outputFileName = [System.IO.Path]::Combine($inputFile.DirectoryName, $outputFileName);
  
  $programFiles = ${env:ProgramFiles(x86)};
  if($programFiles -eq $null) { $programFiles = $env:ProgramFiles; }
  
  $processName = $programFiles + "\VideoLAN\VLC\vlc.exe"
  $processArgs = "-I dummy -vvv `"$($inputFile.FullName)`" --sout=#transcode{acodec=`"mp3`",ab=`"$bitrate`",`"channels=$channels`"}:standard{access=`"file`",mux=`"wav`",dst=`"$outputFileName`"} vlc://quit"
  
  start-process $processName $processArgs -wait
}

Unix / Linux

Transcodes all files in current directory (except hidden files), saving with suffix .transcoded.

#!/bin/sh                                                                                                                                                     
######################## Transcode the files using ... ########################
vcodec="mp4v"
acodec="mp4a"
vb="1024"
ab="128"
mux="mp4"
###############################################################################

# Store path to VLC in $vlc
if command -pv vlc >/dev/null 2>&1; then
    # Linux should find "vlc" when searching PATH
    vlc="vlc"
else
    # macOS seems to need an alias
    vlc="/Applications/Utilities/VLC.app/Contents/MacOS/VLC"
fi
# Sanity check
if ! command -pv "$vlc" >/dev/null 2>&1; then
    printf '%s\n' "Cannot find path to VLC. Abort." >&2
    exit 1
fi

for filename in *; do
    printf '%s\n' "=> Transcoding '$filename'... "
    "$vlc" -I dummy -q "$filename" \
       --sout '#transcode{vcodec="$vcodec",vb="$vb",acodec="$acodec",ab="$ab"}:standard{mux="$mux",dst="$filename.transcoded",access=file}' \
       vlc://quit
    ls -lh "$filename" "$filename.transcoded"
    printf '\n'
done

The wildcard *.transcoded will select all of the transcoded files for group operations.

To move files:

mv *.transcoded <directory>

To remove all filename extensions (including .transcoded):

for filename in *.transcoded; do mv "$filename" "${filename%%.*}"; done

To remove all filename extensions and replace with another (e.g. .mp3):

for filename in *.transcoded; do mv "$filename" "${filename%%.*}.mp3"; done

VLC HowTo/Transcode multiple videos

Contents

Idea

Codecs / Muxers

GUI

Command Lines

Windows

Windows 7 SendTo

Powershell

Unix / Linux

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Help / Documentation

Development

VideoLAN wiki

Tools